Attachment 104980 Details for Bug 135202 – lspci -vvv just in case

lspci -vvv just in case

lspci-vvv.txt (text/plain), 10.68 KB, created by Andrew Duggan on 2004-10-10 04:27:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Duggan

Created: 2004-10-10 04:27:56 UTC

Size: 10.68 KB

patch

obsolete

>[root@apd-fedora ~]# lspci -vvv
>00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 05)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>        Latency: 0
>        Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
>        Capabilities: [e4] Vendor Specific Information
>        Capabilities: [a0] AGP version 2.0
>                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
>
>00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 05) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 96
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>        I/O behind bridge: 00003000-00003fff
>        Memory behind bridge: e8100000-e81fffff
>        Prefetchable memory behind bridge: f0000000-f7ffffff
>        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 10
>        Region 4: I/O ports at 1800 [size=32]
>
>00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 5
>        Region 4: I/O ports at 1820 [size=32]
>
>00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
>        I/O behind bridge: 00004000-00005fff
>        Memory behind bridge: e8200000-e87fffff
>        Prefetchable memory behind bridge: fff00000-000fffff
>        Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>
>00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP])
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 10
>        Region 0: I/O ports at <ignored>
>        Region 1: I/O ports at <ignored>
>        Region 2: I/O ports at <ignored>
>        Region 3: I/O ports at <ignored>
>        Region 4: I/O ports at 1860 [size=16]
>        Region 5: Memory at e8000000 (32-bit, non-prefetchable) [size=1K]
>
>00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin B routed to IRQ 10
>        Region 4: I/O ports at 1880 [size=32]
>
>00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
>        Subsystem: Askey Computer Corp.: Unknown device 1050
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 10
>        Region 0: I/O ports at 2000 [size=256]
>        Region 1: I/O ports at 1c00 [size=128]
>
>01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA])
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
>        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 66 (2000ns min), Cache Line Size 08
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>        Region 1: I/O ports at 3000 [size=256]
>        Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
>        Capabilities: [58] AGP version 2.0
>                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:02.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 168, Cache Line Size 20
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
>        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>        Memory window 0: 20400000-207ff000 (prefetchable)
>        Memory window 1: 20800000-20bff000
>        I/O window 0: 00004000-000040ff
>        I/O window 1: 00004400-000044ff
>        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
>        16-bit legacy interface ports at 0001
>
>02:02.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 168, Cache Line Size 20
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
>        Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
>        Memory window 0: 20c00000-20fff000 (prefetchable)
>        Memory window 1: 21000000-213ff000
>        I/O window 0: 00004800-000048ff
>        I/O window 1: 00004c00-00004cff
>        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>        16-bit legacy interface ports at 0001
>
>02:03.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (500ns min, 6000ns max)
>        Interrupt: pin A routed to IRQ 5
>        Region 0: I/O ports at 5000 [size=256]
>        Capabilities: [c0] Power Management version 2
>                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (500ns min, 1000ns max), Cache Line Size 08
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at e8207000 (32-bit, non-prefetchable) [size=2K]
>        Region 1: Memory at e8200000 (32-bit, non-prefetchable) [size=16K]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
>        Subsystem: Gateway 2000: Unknown device 0400
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 66 (2000ns min, 14000ns max), Cache Line Size 08
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at e8206000 (32-bit, non-prefetchable) [size=4K]
>        Region 1: I/O ports at 5400 [size=64]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
>
>03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01)        Subsystem: Netgear Netgear WG511 Wireless Adapter
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 80 (2500ns min, 7000ns max), Cache Line Size 20
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at 20800000 (32-bit, non-prefetchable) [size=8K]
>        Capabilities: [dc] Power Management version 1
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 135202: 104979 | 104980 | 104981 | 105002 | 105003 | 105004 | 105006 | 105264 | 105265 | 105266 | 105267 | 105341 | 105412