Attachment 105116 Details for Bug 133010 – dmesg

dmesg

2.6.8-1.607 (text/plain), 13.69 KB, created by François Kooman on 2004-10-13 07:48:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: François Kooman

Created: 2004-10-13 07:48:35 UTC

Size: 13.69 KB

patch

obsolete

>Linux version 2.6.8-1.607 (bhcompile@porky.build.redhat.com) (gcc version 3.4.2 20041006 (Red Hat 3.4.2-5)) #1 Mon Oct 11 18:12:41 EDT 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fe70000 (usable)
> BIOS-e820: 000000000fe70000 - 000000000fe7fc00 (ACPI data)
> BIOS-e820: 000000000fe7fc00 - 000000000fe80000 (ACPI NVS)
> BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>254MB LOWMEM available.
>zapping low mappings.
>On node 0 totalpages: 65136
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61040 pages, LIFO batch:14
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6df0
>ACPI: RSDT (v001 PTLTD  	 RSDT   0x06040000  LTP 0x00000000) @ 0x0fe7a263
>ACPI: FADT (v001 FUJITS SALLY    0x06040000 LOHR 0x00000001) @ 0x0fe7fb54
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x0fe7fbd8
>ACPI: DSDT (v001 FUJITS LI1      0x06040000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>mapped 4G/4G trampoline to ffff4000.
>Initializing CPU#0
>CPU 0 irqstacks, hard=023d0000 soft=023cf000
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 847.288 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 253536k/260544k available (2060k kernel code, 6424k reserved, 635k data, 144k init, 0k highmem)
>Calibrating delay loop... 1671.16 BogoMIPS (lpj=835584)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps:        0383f1ff 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Celeron (Coppermine) stepping 0a
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>checking if image is initramfs... it is
>Freeing initrd memory: 946k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfdb22, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: Embedded Controller [EC0] (gpe 28)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:01:02.1[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 10 (level, low) -> IRQ 10
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1097660085.4294967235:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 178EA4FF2F281291
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: probe of vesafb0 failed with error -6
>ACPI: Processor [CPU0] (supports C1)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel i815 Chipset.
>agpgart: Maximum main memory to use for agp memory: 202M
>agpgart: AGP aperture is 64M @ 0xf8000000
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
>PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2M: IDE controller at PCI slot 0000:00:1f.1
>ICH2M: chipset revision 3
>ICH2M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK1016GAP, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide2...
>ide2: Wait for ready failed before probe !
>Probing IDE interface ide3...
>ide3: Wait for ready failed before probe !
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>hda: max request size: 128KiB
>hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(66)
>hda: cache flushes not supported
> hda: hda1 hda2
>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>Synaptics Touchpad, model: 1
> Firmware: 5.6
> 180 degree mounted touchpad
> Sensor: 30
> new absolute packet format
> Touchpad has extended capability bits
> -> 2 multi-buttons, i.e. besides standard buttons
> -> middle button
> -> multifinger detection
> -> palm detection
>input: SynPS/2 Synaptics TouchPad on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 512 buckets, 16Kbytes
>TCP: Hash tables configured (established 16384 bind 4681)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S3 S4 S5)
>ACPI wakeup devices: 
> LID MODM  HUB CRD0 CRD1 MINI 
>Freeing unused kernel memory: 144k freed
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>cdrom: open failed.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 850345
>ext3_orphan_cleanup: deleting unreferenced inode 850344
>EXT3-fs: dm-0: 2 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 4 roles, 280 types, 15 bools
>security:  53 classes, 5318 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>inserting floppy driver for 2.6.8-1.607
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>8139too Fast Ethernet driver 0.9.27
>PCI: Enabling device 0000:01:06.0 (0000 -> 0003)
>ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 10 (level, low) -> IRQ 10
>divert: allocating divert_blk for eth0
>eth0: RealTek RTL8139 at 0xee00, 00:90:96:17:5e:74, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8139C'
>ip_tables: (C) 2000-2002 Netfilter core team
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 49324 usecs
>intel8x0: clocking to 48000
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>hw_random hardware driver 1.0.0 loaded
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: irq 10, io base 00001820
>SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: irq 10, io base 00001840
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ip_tables: (C) 2000-2002 Netfilter core team
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:01:02.0 [10cf:10e7]
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>ACPI: PCI interrupt 0000:01:02.1[B] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:01:02.1 [10cf:10e7]
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>EXT3 FS on dm-0, internal journal
>cdrom: open failed.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 524280k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2035 buckets, 16280 max) - 356 bytes per conntrack
>cs: IO port probe 0x0c00-0x0cff: clean.
>cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>lp0: console ready
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device 023649a0(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>eth0: no IPv6 routers present
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized i810 1.4.0 20030605 on minor 0: 
>mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary
>[drm] Using v1.4 init.
>[drm] DMA Cleanup
>mtrr: base(0xf8000000) is not aligned on a size(0x12c000) boundary
>[drm] Using v1.4 init.
>[drm] DMA Cleanup
>mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary
>[drm] Using v1.4 init.
>[drm] DMA Cleanup

Actions: View

Attachments on bug 133010: 104037 | 104038 | 105116 | 105117 | 105118