Attachment 105265 Details for Bug 135202 – dmesg from the same time as the messages-20041015

dmesg from the same time as the messages-20041015

dmesg.20041015 (text/plain), 14.66 KB, created by Andrew Duggan on 2004-10-15 06:13:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Duggan

Created: 2004-10-15 06:13:22 UTC

Size: 14.66 KB

patch

obsolete

>Linux version 2.6.8-1.610.NTFS (andrew@imladris.arnor.me) (gcc version 3.4.2 20041006 (Red Hat 3.4.2-5)) #1 Wed Oct 13 15:42:15 EDT 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>zapping low mappings.
>On node 0 totalpages: 130944
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126848 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6a40
>ACPI: RSDT (v001 GATEWA 450      0x20020912  LTP 0x00000000) @ 0x1fef84bd
>ACPI: FADT (v001 GATEWA 450      0x20020912 PTL  0x0000001e) @ 0x1fefef64
>ACPI: BOOT (v001 GATEWA 450      0x20020912  LTP 0x00000001) @ 0x1fefefd8
>ACPI: DSDT (v001 GATEWA 450      0x20020912 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ video=vga=0x318 rhgb quiet 
>mapped 4G/4G trampoline to ffff4000.
>Initializing CPU#0
>CPU 0 irqstacks, hard=023d1000 soft=023d0000
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1396.038 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 514516k/523776k available (2064k kernel code, 8540k reserved, 635k data, 144k init, 0k highmem)
>Calibrating delay loop... 2752.51 BogoMIPS (lpj=1376256)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  3febf9ff 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps:        3febf1ff 00000000 00000000 00000080
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.40GHz stepping 04
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>checking if image is initramfs... it is
>Freeing initrd memory: 388k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd999, last bus=2
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
>ACPI: Device [FDDA] status [00000008]: functional but not present; setting present
>ACPI: Embedded Controller [EC0] (gpe 29)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: Device [BAY2] status [00000008]: functional but not present; setting present
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:02:02.1[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1097794554.4294965871:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key C1AEF9A4E164B5A2
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0x22880000, size 4608k
>vesafb: mode is 1024x768x24, linelength=3072, pages=13
>vesafb: protected mode interface info at c000:523f
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>ACPI: Processor [CPU0] (supports C1 C2 C3)
>ACPI: Thermal Zone [THRM] (39 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: Maximum main memory to use for agp memory: 439M
>agpgart: AGP aperture is 64M @ 0xec000000
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
>ICH3M: chipset revision 2
>ICH3M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IC25N020ATCS04-0, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide2...
>ide2: Wait for ready failed before probe !
>Probing IDE interface ide3...
>ide3: Wait for ready failed before probe !
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>hda: max request size: 128KiB
>hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>Synaptics Touchpad, model: 1
> Firmware: 5.9
> Sensor: 28
> new absolute packet format
> Touchpad has extended capability bits
> -> four buttons
> -> multifinger detection
> -> palm detection
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 1024 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 9362)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S3 S4 S5)
>ACPI wakeup devices: 
>MDM0 ILAN USB1 USB2  LID 
>Freeing unused kernel memory: 144k freed
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.8-1.610.NTFS
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
>e100: Copyright(c) 1999-2004 Intel Corporation
>ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
>divert: allocating divert_blk for eth0
>e100: eth0: e100_probe: addr 0xe8206000, irq 10, MAC addr 00:E0:B8:49:D1:A8
>snd_maestro3: Unknown parameter `'
>ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5
>snd_intel8x0m: Unknown parameter `'
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>hw_random hardware driver 1.0.0 loaded
>USB Universal Host Controller Interface driver v2.2
>PCI: Enabling device 0000:00:1d.0 (0004 -> 0005)
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 10, io base 00001800
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Enabling device 0000:00:1d.1 (0004 -> 0005)
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 5, io base 00001820
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:02.0 [107b:0400]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:02.0, mfunc 0x011c1112, devctl 0x64
>Yenta: ISA IRQ mask 0x0898, PCI irq 10
>Socket status: 30000006
>ACPI: PCI interrupt 0000:02:02.1[A] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:02.1 [107b:0400]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:02.1, mfunc 0x011c1112, devctl 0x64
>Yenta: ISA IRQ mask 0x0898, PCI irq 10
>Socket status: 30000006
>ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[e8207000-e82077ff]  Max Packet=[2048]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0b80400002f4d]
>mtrr: 0xf0000000,0x2000000 overlaps existing 0xf0000000,0x400000
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized radeon 1.11.0 20020828 on minor 0: 
>mtrr: 0xf0000000,0x2000000 overlaps existing 0xf0000000,0x400000
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>EXT3 FS on hda2, internal journal
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>cdrom: open failed.
>NTFS driver 2.1.20 [Flags: R/O MODULE].
>NTFS volume version 3.1.
>Adding 1310896k swap on /dev/hda3.  Priority:-1 extents:1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 updated from revision 0x11 to 0x20, date = 06052003 
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4092 buckets, 32736 max) - 356 bytes per conntrack
>cs: IO port probe 0x0c00-0x0cff: clean.
>cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>mtrr: 0xf0000000,0x2000000 overlaps existing 0xf0000000,0x400000
>Loaded prism54 driver, version 1.2
>PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
>ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>divert: allocating divert_blk for eth1
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>eth1: firmware uploaded done, now triggering reset...
>usb 1-2: new full speed USB device using address 2
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>  Vendor: LEXAR     Model: JUMPDRIVE TRAVEL  Rev: 2000
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>USB Mass Storage device found at 2
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>SCSI device sda: 502880 512-byte hdwr sectors (257 MB)
>sda: Write Protect is off
>sda: Mode Sense: 43 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>cs: memory probe 0xa0000000-0xa0ffffff: clean.

Actions: View

Attachments on bug 135202: 104979 | 104980 | 104981 | 105002 | 105003 | 105004 | 105006 | 105264 | 105265 | 105266 | 105267 | 105341 | 105412