Attachment 105821 Details for Bug 137263 – dump of dmesg

dump of dmesg

dmesg.txt (text/plain), 12.37 KB, created by Neil Gierman on 2004-10-27 01:25:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Neil Gierman

Created: 2004-10-27 01:25:25 UTC

Size: 12.37 KB

patch

obsolete

>Linux version 2.6.9-1.643 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6)) #1 Fri Oct 22 14:48:08 EDT 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff3800 (reserved)
> BIOS-e820: 000000000fff3800 - 0000000010000000 (ACPI NVS)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>zapping low mappings.
>On node 0 totalpages: 65520
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61424 pages, LIFO batch:14
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f9970
>ACPI: RSDT (v001 COMPAQ RSDB130  0x00000001 CPQ  0x00000001) @ 0x0fff4800
>ACPI: FADT (v001 COMPAQ CPQB10F  0x20011129 CPQ  0x00000001) @ 0x0fff4828
>ACPI: DSDT (v001 COMPAQ ARMADAE7 0x00010000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x5008
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped 4G/4G trampoline to ffff4000.
>Initializing CPU#0
>CPU 0 irqstacks, hard=023d5000 soft=023d4000
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 696.786 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 255304k/262080k available (2068k kernel code, 6092k reserved, 647k data, 144k init, 0k highmem)
>Calibrating delay loop... 1376.25 BogoMIPS (lpj=688128)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps:        0383f1ff 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Pentium III (Coppermine) stepping 06
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>checking if image is initramfs... it is
>Freeing initrd memory: 385k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [C005] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C005.C012._PRT]
>ACPI: Power Resource [C13C] (on)
>ACPI: Power Resource [C0E5] (on)
>ACPI: PCI Interrupt Link [C187] (IRQs *11)
>ACPI: PCI Interrupt Link [C18D] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [C18E] (IRQs *11)
>ACPI: PCI Interrupt Link [C18F] (IRQs *11)
>ACPI: Power Resource [C1A4] (off)
>ACPI: Power Resource [C1A6] (off)
>ACPI: Power Resource [C1A8] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [C187] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt 0000:00:04.1[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [C18F] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [C18E] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
>cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1098788626.4294966937:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key EC13B46896B3DF5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: probe of vesafb0 failed with error -6
>ACPI: Fan [C1A2] (off)
>ACPI: Fan [C1A5] (off)
>ACPI: Fan [C1A7] (off)
>ACPI: Processor [C0BE] (supports C1 C2, 8 throttling states)
>ACPI: Thermal Zone [C1A3] (51 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: Maximum main memory to use for agp memory: 203M
>agpgart: AGP aperture is 64M @ 0x50000000
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 11 (level, low) -> IRQ 11
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x3460-0x3467, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0x3468-0x346f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: IBM-DJSA-230, ATA DISK drive
>hdb: Compaq DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>ide2: Wait for ready failed before probe !
>Probing IDE interface ide3...
>ide3: Wait for ready failed before probe !
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>hda: max request size: 128KiB
>hda: 58605120 sectors (30005 MB) w/1874KiB Cache, CHS=58140/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3
>hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: PS/2 Generic Mouse on isa0060/serio4
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 512 buckets, 16Kbytes
>TCP: Hash tables configured (established 16384 bind 4681)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S4bios S5)
>ACPI wakeup devices: 
>C005 C0B9 C190 C057 C1AE 
>Freeing unused kernel memory: 144k freed
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-1.643
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
>e100: Copyright(c) 1999-2004 Intel Corporation
>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
>divert: allocating divert_blk for eth0
>e100: eth0: e100_probe: addr 0x41280000, irq 11, MAC addr 00:D0:59:36:E3:78
>Loaded prism54 driver, version 1.2
>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>Losing some ticks... checking if CPU frequency changed.
>es1968: clocking to 48000
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: irq 11, io base 00003440
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b113]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:04.0, mfunc 0x00000000, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000006
>ACPI: PCI interrupt 0000:00:04.1[A] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b113]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:04.1, mfunc 0x00000000, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000020
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
>ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11
>divert: allocating divert_blk for eth1
>ACPI: AC Adapter [C105] (on-line)
>ACPI: Battery Slot [C10D] (battery present)
>ACPI: Battery Slot [C10E] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [C057]
>ACPI: Lid Switch [C1AE]
>EXT3 FS on hda2, internal journal
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>cdrom: open failed.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524152k swap on /dev/hda3.  Priority:-1 extents:1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microdata for cpu 0
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>cs: IO port probe 0x0c00-0x0cff: clean.
>cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>i2c /dev entries driver
>lp: driver loaded but no devices found
>eth1: removing device
>divert: freeing divert_blk for eth1
>Unloaded prism54 driver
>Loaded prism54 driver, version 1.2
>ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11
>divert: allocating divert_blk for eth1
>ip_tables: (C) 2000-2002 Netfilter core team
>eth1: islpci_open()
>eth1: resetting device...
>eth1: uploading firmware...
>eth1: firmware uploaded done, now triggering reset...

Actions: View

Attachments on bug 137263: 105821 | 105832