Attachment 1141184 Details for Bug 1321886 – serial.log

serial.log

serial.log (text/plain), 47.53 KB, created by billiboy on 2016-03-29 10:13:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: billiboy

Created: 2016-03-29 10:13:49 UTC

Size: 47.53 KB

patch

obsolete

>=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.03.28 15:10:11 =~=~=~=~=~=~=~=~=~=~=~=
>
>
U-Boot SPL 2016.03 (Mar 24 2016 - 10:29:27)
>
Trying to boot from MMC
>
>
>
U-Boot 2016.03 (Mar 24 2016 - 10:29:27 +0100)
>
>
CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
>
CPU:   Extended Commercial temperature grade (-20C to 105C) at 16C
>
Reset cause: POR
>
Board: MX6 Cubox-i
>
DRAM:  2 GiB
>
MMC:   FSL_SDHC: 0
>
*** Warning - bad CRC, using default environment
>
>
auto-detected panel HDMI
>
Display: HDMI (1024x768)
>
In:    serial
>
Out:   serial
>
Err:   serial
>
Net:   FEC
>
starting USB...
>
USB0:   Port not available.
>
USB1:   USB EHCI 1.00
>
scanning bus 1 for devices... ERROR: Invalid USB EP length (9)
>
ERROR: Invalid USB EP length (9)
>
5 USB Device(s) found
>
       scanning usb for storage devices... 0 Storage Device(s) found
>
Hit any key to stop autoboot:  2  1  0 
>
switch to partitions #0, OK
>
mmc0 is current device
>
Scanning mmc 0:1...
>
Found /extlinux/extlinux.conf
>
Retrieving file: /extlinux/extlinux.conf
>
594 bytes read in 57 ms (9.8 KiB/s)
>
Ignoring unknown command: ui
>
Ignoring malformed menu command:  autoboot
>
Ignoring malformed menu command:  hidden
>
Ignoring unknown command: totaltimeout
>
Fedora-Minimal-armhfp-24_Alpha-7 Boot Options.
>
1:	Fedora-Minimal-armhfp-24_Alpha-7 (4.5.0-0.rc7.git0.2.fc24.armv7hl)
>
Enter choice: 1:	Fedora-Minimal-armhfp-24_Alpha-7 (4.5.0-0.rc7.git0.2.fc24.armv7hl)
>
Retrieving file: /initramfs-4.5.0-0.rc7.git0.2.fc24.armv7hl.img
>
39384361 bytes read in 2498 ms (15 MiB/s)
>
Retrieving file: /vmlinuz-4.5.0-0.rc7.git0.2.fc24.armv7hl
>
6139264 bytes read in 464 ms (12.6 MiB/s)
>
append: ro root=UUID=ea75933f-764f-4a3a-9c03-261c408be548 console=ttymxc0,115200n8 console=tty1
>
Retrieving file: /dtb-4.5.0-0.rc7.git0.2.fc24.armv7hl/imx6q-cubox-i.dtb
>
34233 bytes read in 1649 ms (19.5 KiB/s)
>
Kernel image @ 0x12000000 [ 0x000000 - 0x5dad80 ]
>
## Flattened Device Tree blob at 18000000
>
   Booting using the fdt blob at 0x18000000
>
EHCI failed to shut down host controller.
>
   Using Device Tree in place at 18000000, end 1800b5b8
>
>
Starting kernel ...
>
>
[    0.000000] Booting Linux on physical CPU 0x0
>[    0.000000] Linux version 4.5.0-0.rc7.git0.2.fc24.armv7hl (mockbuild@arm01-builder02.arm.fedoraproject.org) (gcc version 6.0.0 20160305 (Red Hat 6.0.0-0.15) (GCC) ) #1 SMP Tue Mar 8 02:11:05 UTC 2016
>[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>[    0.000000] Machine model: SolidRun Cubox-i Dual/Quad
>[    0.000000] efi: Getting EFI parameters from FDT:
>[    0.000000] efi: UEFI not found.
>[    0.000000] cma: Reserved 16 MiB at 0x8f000000
>[    0.000000] Memory policy: Data cache writealloc
>[    0.000000] PERCPU: Embedded 13 pages/cpu @eeda0000 s23628 r8192 d21428 u53248
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522560
>[    0.000000] Kernel command line: ro root=UUID=ea75933f-764f-4a3a-9c03-261c408be548 console=ttymxc0,115200n8 console=tty1
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Memory: 2008400K/2097152K available (7612K kernel code, 1173K rwdata, 3456K rodata, 1152K init, 858K bss, 72368K reserved, 16384K cma-reserved, 1294336K highmem)
>[    0.000000] Virtual kernel memory layout:
>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
>[    0.000000]       .text : 0xc0208000 - 0xc0cd74ac   (11070 kB)
>[    0.000000]       .init : 0xc0cd8000 - 0xc0df8000   (1152 kB)
>[    0.000000]       .data : 0xc0df8000 - 0xc0f1d504   (1174 kB)
>[    0.000000]        .bss : 0xc0f1d504 - 0xc0ff3f00   ( 859 kB)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 32.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
>[    0.000000] NR_IRQS:16 nr_irqs:16 16
>[    0.000000] L2C-310 erratum 769419 enabled
>[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
>[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
>[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
>[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
>[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
>[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
>[    0.000000] Switching to timer-based delay loop, resolution 333ns
>[    0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
>[    0.000029] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
>[    0.003557] Console: colour dummy device 80x30
>[    0.004791] console [tty1] enabled
>[    0.004857] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000)
>[    0.004934] pid_max: default: 32768 minimum: 301
>[    0.005205] Security Framework initialized
>[    0.005245] Yama: becoming mindful.
>[    0.005292] SELinux:  Initializing.
>[    0.005660] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.005709] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.006750] CPU: Testing write buffer coherency: ok
>[    0.006822] ftrace: allocating 31765 entries in 63 pages
>[    0.063518] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>[    0.063689] Setting up static identity map for 0x10208280 - 0x10208318
>[    0.070279] EFI services will not be available.
>[    0.071393] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>[    0.072232] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>[    0.073087] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>[    0.073182] Brought up 4 CPUs
>[    0.073305] SMP: Total of 4 processors activated (24.00 BogoMIPS).
>[    0.073338] CPU: All CPU(s) started in SVC mode.
>[    0.074593] devtmpfs: initialized
>[    0.084388] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
>[    0.085317] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
>[    0.086774] atomic64_test: passed
>[    0.086907] pinctrl core: initialized pinctrl subsystem
>[    0.088711] NET: Registered protocol family 16
>[    0.091212] DMA: preallocated 256 KiB pool for atomic coherent allocations
>[    0.093366] CPU identified as i.MX6Q, silicon rev 1.2
>[    0.116762] No ATAGs?
>[    0.116809] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
>[    0.116886] hw-breakpoint: maximum watchpoint size is 4 bytes.
>[    0.118844] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
>[    0.120325] Serial: AMBA PL011 UART driver
>[    0.121846] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    0.148534] mxs-dma 110000.dma-apbh: initialized
>[    0.155366] vgaarb: loaded
>[    0.156575] SCSI subsystem initialized
>[    0.157177] usbcore: registered new interface driver usbfs
>[    0.157278] usbcore: registered new interface driver hub
>[    0.157425] usbcore: registered new device driver usb
>[    0.159637] NetLabel: Initializing
>[    0.159677] NetLabel:  domain hash size = 128
>[    0.159706] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.159780] NetLabel:  unlabeled traffic allowed by default
>[    0.160482] clocksource: Switched to clocksource mxc_timer1
>[    0.237200] VFS: Disk quotas dquot_6.6.0
>[    0.237340] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.252071] NET: Registered protocol family 2
>[    0.253077] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.253225] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.253381] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.253512] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.253606] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.254071] NET: Registered protocol family 1
>[    0.254746] RPC: Registered named UNIX socket transport module.
>[    0.254788] RPC: Registered udp transport module.
>[    0.254818] RPC: Registered tcp transport module.
>[    0.254850] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.255561] Unpacking initramfs...
>[    3.611246] Freeing initrd memory: 38464K (c3000000 - c5590000)
>[    3.611821] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
>[    3.620359] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    3.620660] audit: initializing netlink subsys (disabled)
>[    3.620751] audit: type=2000 audit(3.595:1): initialized
>[    3.631881] zbud: loaded
>[    3.634896] NFS: Registering the id_resolver key type
>[    3.634982] Key type id_resolver registered
>[    3.635015] Key type id_legacy registered
>[    3.635075] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>[    3.635886] Key type big_key registered
>[    3.665681] NET: Registered protocol family 38
>[    3.665881] bounce: pool size: 64 pages
>[    3.666221] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    3.666469] io scheduler noop registered
>[    3.666514] io scheduler deadline registered
>[    3.666642] io scheduler cfq registered (default)
>[    3.667575] imx-weim 21b8000.weim: Driver registered.
>[    3.677459] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    3.687365] Serial: AMBA driver
>[    3.688349] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX
>[    4.386364] console [ttymxc0] enabled
>[    4.391124] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 292, base_baud = 5000000) is a IMX
>[    4.400760] msm_serial: driver initialized
>[    4.408173] libphy: Fixed MDIO Bus: probed
>[    4.412958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    4.419585] ehci-pci: EHCI PCI platform driver
>[    4.424157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    4.430415] ohci-pci: OHCI PCI platform driver
>[    4.434970] uhci_hcd: USB Universal Host Controller Interface driver
>[    4.441676] usbcore: registered new interface driver usbserial
>[    4.447609] usbcore: registered new interface driver usbserial_generic
>[    4.454225] usbserial: USB Serial support registered for generic
>[    4.460601] mousedev: PS/2 mouse device common for all mice
>[    4.470870] device-mapper: uevent: version 1.0.3
>[    4.476036] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
>[    4.485146] ledtrig-cpu: registered to indicate activity on CPUs
>[    4.491348] hidraw: raw HID events driver (C) Jiri Kosina
>[    4.497098] usbcore: registered new interface driver usbhid
>[    4.502720] usbhid: USB HID core driver
>[    4.509243] drop_monitor: Initializing network drop monitor service
>[    4.515936] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    4.521438] Initializing XFRM netlink socket
>[    4.526866] NET: Registered protocol family 10
>[    4.532619] mip6: Mobile IPv6
>[    4.535663] NET: Registered protocol family 17
>[    4.540257] Key type dns_resolver registered
>[    4.545959] ThumbEE CPU extension supported.
>[    4.550280] Registering SWP/SWPB emulation handler
>[    4.556157] registered taskstats version 1
>[    4.560542] zswap: loaded using pool lzo/zbud
>[    4.565665] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    4.572231] hctosys: unable to open rtc device (rtc0)
>[    4.577738] sr_init: No PMIC hook to init smartreflex
>[    4.582968] sr_init: platform driver register failed for SR
>[    4.605058] brcm_reg: disabling
>[    4.608275] usb_h1_vbus: disabling
>[    4.611727] usb_otg_vbus: disabling
>[    4.619159] Freeing unused kernel memory: 1152K (c0cd8000 - c0df8000)
>[    4.660235] systemd[1]: System time before build time, advancing clock.
>[    4.673309] random: systemd urandom read with 0 bits of entropy available
>[    4.689984] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    4.708714] systemd[1]: Detected architecture arm.
>[    4.713595] systemd[1]: Running in initial RAM disk.
>[    4.719081] systemd[1]: No hostname configured.
>[    4.723720] systemd[1]: Set hostname to <localhost>.
>[    4.729029] systemd[1]: Initializing machine ID from random generator.
>[    5.066087] systemd[1]: Reached target Local File Systems.
>[    5.072334] systemd[1]: Listening on udev Kernel Socket.
>[    5.078223] systemd[1]: Listening on Journal Socket (/dev/log).
>[    5.084865] systemd[1]: Listening on Journal Audit Socket.
>[    5.091011] systemd[1]: Listening on Journal Socket.
>[    5.096385] systemd[1]: Reached target Timers.
>[    5.101190] systemd[1]: Reached target Swap.
>[    5.108415] systemd[1]: Created slice System Slice.
>[    5.131023] systemd[1]: Starting Setup Virtual Console...
>[    5.142526] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    5.157981] systemd[1]: Starting Apply Kernel Variables...
>[    5.164518] systemd[1]: Listening on udev Control Socket.
>[    5.170671] systemd[1]: Reached target Slices.
>[    5.180651] systemd[1]: Starting dracut cmdline hook...
>[    5.191488] systemd[1]: Starting Journal Service...
>[    5.207923] systemd[1]: Started Setup Virtual Console.
>[    5.214106] audit: type=1130 audit(1455208080.550:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.236854] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    5.246559] audit: type=1130 audit(1455208080.585:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.268183] systemd[1]: Started Apply Kernel Variables.
>[    5.274098] audit: type=1130 audit(1455208080.610:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.295281] systemd[1]: Started Journal Service.
>[    5.300801] audit: type=1130 audit(1455208080.640:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.578467] audit: type=1130 audit(1455208080.915:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    6.028290] audit: type=1130 audit(1455208081.365:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    6.126808] Loading iSCSI transport class v2.0-870.
>[    6.139162] audit: type=1130 audit(1455208081.475:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    6.261381] alua: device handler registered
>[    6.282642] emc: device handler registered
>[    6.303755] rdac: device handler registered
>[    6.396214] audit: type=1130 audit(1455208081.735:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    6.483491] audit: type=1130 audit(1455208081.820:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    7.556628] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
>[    7.563958] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.568125] [drm] Initialized drm 1.1.0 20060810
>[    7.590433] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.628893] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.659683] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.674700] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.683274] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
>[    7.723072] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
>[    7.728607] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044
>[    7.728617] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
>[    7.728625] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
>[    7.728633] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
>[    7.757953] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
>[    7.757988] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
>[    7.758000] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
>[    7.767556] sdhci: Secure Digital Host Controller Interface driver
>[    7.767559] sdhci: Copyright(c) Pierre Ossman
>[    7.768983] sdhci-pltfm: SDHCI platform and OF driver helper
>[    7.778821] pps_core: LinuxPPS API ver. 1 registered
>[    7.778831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    7.780647] PTP clock support registered
>[    7.781344] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified
>[    7.781365] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
>[    7.781765] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
>[    7.852960] scsi host0: ahci-imx
>[    7.856991] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 295
>[    8.095577] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
>[    8.112789] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
>[    8.122047] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
>[    8.131348] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
>[    8.146960] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
>[    8.154237] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
>[    8.161578] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
>[    8.170193] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
>[    8.178813] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
>[    8.179010] ata1: SATA link down (SStatus 0 SControl 300)
>[    8.179054] ahci-imx 2200000.sata: no device found, disabling link.
>[    8.179061] ahci-imx 2200000.sata: pass .hotplug=1 to enable hotplug
>[    8.181016] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
>[    8.182198] 2188000.ethernet supply phy not found, using dummy regulator
>[    8.191124] pps pps0: new PPS source ptp0
>[    8.236201] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
>[    8.244375] libphy: fec_enet_mii_bus: probed
>[    8.249669] fec 2188000.ethernet eth0: registered PHC device 0
>[    8.256414] i2c i2c-1: IMX I2C adapter registered
>[    8.261240] i2c i2c-1: can't use DMA, using PIO instead.
>[    8.267738] i2c i2c-2: IMX I2C adapter registered
>[    8.269051] mmc1: host does not support reading read-only switch, assuming write-enable
>[    8.275153] mmc1: new high speed SDHC card at address 0007
>[    8.280532] mmcblk0: mmc1:0007 SD08G 7.39 GiB 
>[    8.283874]  mmcblk0: p1 p2 p3
>[    8.293872] i2c i2c-2: can't use DMA, using PIO instead.
>[    8.304619] mmc0: new high speed SDIO card at address 0001
>[    8.317443] rtc-pcf8523 2-0068: rtc core: registered rtc-pcf8523 as rtc1
>[    8.702934] audit_printk_skb: 6 callbacks suppressed
>[    8.708024] audit: type=1130 audit(1455208084.040:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>%G[[0;32m  OK  [0m] Found device /dev/disk/by-uuid/ea75933f-764f-4a3a-9c03-261c408be548.

>[[0;32m  OK  [0m] Started dracut initqueue hook.

>[    8.815692] audit: type=1130 audit(1455208084.155:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Show Plymouth Boot Screen.

>[[0;32m  OK  [0m] Started Forward Password Requests to Plymouth Directory Watch.

>[[0;32m  OK  [0m] Reached target Paths.

>[[0;32m  OK  [0m] Reached target Basic System.

>         Starting dracut pre-mount hook...

>[[0;32m  OK  [0m] Reached target Remote File Systems (Pre).

>[[0;32m  OK  [0m] Reached target Remote File Systems.

>[[0;32m  OK  [0m] Started dracu[    9.033268] audit: type=1130 audit(1455208084.370:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>t pre-mount hook.

>         Starting File System Check on /dev/...f-764f-4a3a-9c03-261c408be548...

>
_/: fsck 0.0% complete...

_/: fsck 7.0% complete...

_/: fsck 14.0% complete...

_/: fsck 21.0% complete...

_/: fsck 28.0% complete...

_/: fsck 35.0% complete...

_/: fsck 70.0% complete...

_/: fsck 70.5% complete...

_/: fsck 71.1% complete...

_/: fsck 71.5% complete...

_/: fsck 72.1% complete...

_/: fsck 72.7% complete...

_/: fsck 73.3% complete...

_/: fsck 74.0% complete...

_/: fsck 74.6% complete...

_/: fsck 75.2% complete...

_/: fsck 75.9% complete...

_/: fsck 76.5% complete...

_/: fsck 77.1% complete...

_/: fsck 77.6% complete...

_/: fsck 78.2% complete...

_/: fsck 78.8% complete...

_/: fsck 79.5% complete...

_/: fsck 80.0% complete...

_/: fsck 80.5% complete...

_/: fsck 81.1% complete...

_/: fsck 81.7% complete...

_/: fsck 82.3% complete...

_/: fsck 82.9% complete...

_/: fsck 83.4% complete...

_/: fsck 83.9% complete...

_/: fsck 84.5% complete...

_/: fsck 85.0% complete...

_/: fsck 85.7% complete...

_/: fsck 86.2% complete...

_/: fsck 86.8% complete...

_/: fsck 87.4% complete...

_/: fsck 88.0% complete...

_/: fsck 88.6% complete...

_/: fsck 89.2% complete...

_/: fsck 89.7% complete...

_/: fsck 89.9% complete...

_/: fsck 90.9% complete...

_/: fsck 94.7% complete...

[[0;32m  OK  [0m] Started File [   12.084912] audit: type=1130 audit(1455208087.420:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>System Check on /dev/d...33f-764f-4a3a-9c03-261c408be548.

>         Mounting /sysroot...

>[   12.281623] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
>[[0;32m  OK  [0m] Mounted /sysroot.

>[[0;32m  OK  [0m] Reached target Initrd Root File System.

>         Starting Reload Configuration from the Real Root...

>[[0;32m  OK  [0m] Started Reloa[   12.983716] audit: type=1130 audit(1455208088.320:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>d Configuration from the Real Roo[   13.006437] audit: type=1131 audit(1455208088.345:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>t.

>[[0;32m  OK  [0m] Reached target Initrd File Systems.

>[[0;32m  OK  [0m] Reached target Initrd Default Target.

>         Starting dracut pre-pivot and cleanup hook...

>[[0;32m  OK  [0m] Started dracu[   13.467700] audit: type=1130 audit(1455208088.805:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>t pre-pivot and cleanup hook.

>         Starting Cleaning Up and Shutting Down Daemons...

>         Starting Plymouth switch root service...

>[[0;32m  OK  [0m] Stopped target Timers.

>[   13.587200] audit: type=1130 audit(1455208088.925:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Stopped Clean[   13.610027] audit: type=1131 audit(1455208088.945:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>ing Up and Shutting Down Daemons.

>[[0;32m  OK  [0m] Started Plymo[   13.636753] audit: type=1130 audit(1455208088.975:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>uth switch root service.

>[[0;32m  OK  [0m] Stopped dracu[   13.721285] audit_printk_skb: 3 callbacks suppressed
>t pre-pivot and cleanup hook.

>[   13.721300] audit: type=1131 audit(1455208089.060:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Stopped target Remote File Systems.

>[[0;32[   13.756491] audit: type=1130 audit(1455208089.095:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>m  OK  [0m] Stopped target Remot[   13.777536] audit: type=1131 audit(1455208089.115:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>e File Systems (Pre).

>[[0;32m  OK  [0m] Stopped target Initrd[   13.802650] audit: type=1130 audit(1455208089.140:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> Default Target.

>[[0;32m  OK  [   13.825657] audit: type=1131 audit(1455208089.165:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[0m] Stopped target Basic System[   13.850134] audit: type=1130 audit(1455208089.185:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>.

>[[0;32m  OK  [0m] Stopped t[   13.850232] audit: type=1131 audit(1455208089.185:30): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>arget Paths.

>[[0;32m  OK  [0m[   13.893993] audit: type=1130 audit(1455208089.230:31): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>] Stopped target Slices.

>[[0;3[   13.894095] audit: type=1131 audit(1455208089.230:32): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>2m  OK  [0m] Stopped target Sockets.

>[[0;32m  OK  [0m] Closed Open-iSCSI iscsiuio Socket.

>[[0;32m  OK  [0m] Stopped target System Initialization.

>[[0;32m  OK  [0m] Stopped Apply Ke[   13.954009] audit: type=1130 audit(1455208089.290:33): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>rnel Variables.

>[[0;32m  OK  [0m] Stopped target Swap.

>[[0;32m  OK  [0m] Stopped target Local File Systems.

>[[0;32m  OK  [0m] Stopped dracut pre-mount hook.

>[[0;32m  OK  [0m] Stopped dracut initqueue hook.

>[[0;32m  OK  [0m] Stopped udev Coldplug all Devices.

>         Stopping Open-iSCSI...

>[[0;32m  OK  [0m] Stopped dracut pre-trigger hook.

>         Stopping udev Kernel Device Manager...

>[[0;32m  OK  [0m] Stopped Open-iSCSI.

>[[0;32m  OK  [0m] Stopped udev Kernel Device Manager.

>[[0;32m  OK  [0m] Stopped Create Static Device Nodes in /dev.

>[[0;32m  OK  [0m] Stopped Create list of required sta...ce nodes for the current kernel.

>[[0;32m  OK  [0m] Stopped dracut pre-udev hook.

>[[0;32m  OK  [0m] Closed udev Control Socket.

>[[0;32m  OK  [0m] Closed udev Kernel Socket.

>         Starting Cleanup udevd DB...

>[[0;32m  OK  [0m] Stopped dracut cmdline hook.

>[[0;32m  OK  [0m] Started Cleanup udevd DB.

>[[0;32m  OK  [0m] Reached target Switch Root.

>         Starting Switch Root...

>[   14.290328] systemd-journald[149]: Received SIGTERM from PID 1 (systemd).
>[   15.550625] SELinux:  Permission validate_trans in class security not defined in policy.
>[   15.559439] SELinux: the above unknown classes and permissions will be allowed
>[   15.656310] systemd[1]: Successfully loaded SELinux policy in 839.347ms.
>[   16.001802] systemd[1]: Relabelled /dev and /run in 177.386ms.
>

>Welcome to [0;34mFedora 24 (Twenty Four)[0m!

>[[0;32m  OK  [0m] Stopped Switch Root.

>[[0;32m  OK  [0m] Stopped Journal Service.

>         Starting Journal Service...

>[[0;32m  OK  [0m] Created slice User and Session Slice.

>[[0;32m  OK  [0m] Reached target Slices.

>[[0;32m  OK  [0m] Listening on LVM2 poll daemon socket.

>[[0;32m  OK  [0m] Stopped File System Check on Root Device.

>[[0;32m  OK  [0m] Started Forward Password Requests to Wall Directory Watch.

>[[0;32m  OK  [0m] Stopped target Switch Root.

>[[0;32m  OK  [0m] Stopped target Initrd File Systems.

>[[0;32m  OK  [0m] Set up automount Arbitrary Executab...ats File System Automount Point.

>[[0;32m  OK  [0m] Created slice system-getty.slice.

>[[0;32m  OK  [0m] Stopped target Initrd Root File System.

>[[0;32m  OK  [0m] Listening on udev Kernel Socket.

>         Starting Remount Root and Kernel File Systems...

>[[0;32m  OK  [0m] Listening on LVM2 metadata daemon socket.

>[[0;32m  OK  [0m] Listening on udev Control Socket.

>[[0;32m  OK  [0m] Reached target Paths.

>         Starting Apply Kernel Variables...

>[[0;32m  OK  [0m] Listening on Device-mapper event daemon FIFOs.

>[[0;32m  OK  [0m] Listening on Process Core Dump Socket.

>[[0;32m  OK  [0m] Created slice system-serial\x2dgetty.slice.

>         Starting Create list of required st... nodes for the current kernel...

>         Mounting POSIX Message Queue File System...

>         Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...

>         Mounting Debug File System...

>[[0;32m  OK  [0m] Listening on /dev/initctl Compatibility Named Pipe.

>[[0;32m  OK  [0m] Started Journal Service.

>[[0;32m  OK  [0m] Started Apply Kernel Variables.

>[[0;32m  OK  [0m] Started Create list of required sta...ce nodes for the current kernel.

>[   17.525370] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
>[[0;32m  OK  [0m] Mounted Debug File System.

>[[0;32m  OK  [0m] Mounted POSIX Message Queue File System.

>[[0;32m  OK  [0m] Started Remount Root and Kernel File Systems.

>[[0;32m  OK  [0m] Started LVM2 metadata daemon.

>         Starting Configure read-only root support...

>         Starting Rebuild Hardware Database...

>         Starting Create System Users...

>         Starting Rebuild Dynamic Linker Cache...

>         Starting Flush Journal to Persistent Storage...

>[[0;32m  OK  [0m] Started Configure read-only root support.

>         Starting Load/Save Rando[   18.327764] systemd-journald[552]: Received request to flush runtime journal from PID 1
>m Seed...

>[[0;32m  OK  [0m] Started Load/[   21.088540] audit_printk_skb: 135 callbacks suppressed
>Save Random Seed.

>[   21.096416] audit: type=1130 audit(1455208096.425:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   23.141069] audit: type=1130 audit(1455208098.480:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Monitoring of LVM2 mirrors,...ng dmev[   23.166894] audit: type=1130 audit(1455208098.505:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>entd or progress polling.

>[[0;32m  OK  [0m] Started Create System Users.

>         Starting Create Static Device Nodes in /dev...

>[   24.810608] random: nonblocking pool is initialized
>[[0;32m  OK  [0m] Started Flush[   24.825879] audit: type=1130 audit(1455208100.165:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
> Journal to Persistent Storage.

>[[0;32m  OK  [0m] Started Creat[   25.232747] audit: type=1130 audit(1455208100.570:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>e Static Device Nodes in /dev.

>         Starting udev Kernel Device Manager...

>[[0;32m  OK  [0m] Started udev [   25.977738] audit: type=1130 audit(1455208101.315:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>Kernel Device Manager.

>[   26.146926] audit: type=1130 audit(1455208101.485:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Rebuild Hardware Database.

>         Starting udev Coldplug all Devices...

>[   27.634595] audit: type=1130 audit(1455208102.970:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started udev Coldplug all Devices.

>         Starting udev Wait for Complete Device Initialization...

>[   27.860375] Registered IR keymap rc-empty
>[   27.865037] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0/input1
>[   27.875288] rc rc0: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0
>[   27.905057] imx-ipuv3 2400000.ipu: IPUv3H probed
>[   27.906628] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops [etnaviv])
>[   27.906700] etnaviv gpu-subsystem: bound 130000.gpu (ops gpu_ops [etnaviv])
>[   27.906759] etnaviv gpu-subsystem: bound 2204000.gpu (ops gpu_ops [etnaviv])
>[   27.906771] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
>[   27.924574] lirc_dev: IR Remote Control driver registered, major 243 
>[   27.940555] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
>[   27.940564] IR LIRC bridge handler initialized
>[   27.959557] imx-ipuv3 2800000.ipu: IPUv3H probed
>[[0;32m  OK  [0m] Found device /dev/ttymxc0.

>[   28.001449] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
>[   28.008777] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
>[   28.051711] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
>[   28.058062] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
>[   28.064527] etnaviv-gpu 2204000.gpu: hw init failed: -6
>[   28.076968] caam 2100000.caam: Entropy delay = 3200
>[   28.142827] caam 2100000.caam: Instantiated RNG4 SH0
>[   28.203595] caam 2100000.caam: Instantiated RNG4 SH1
>[   28.208862] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
>[   28.215432] caam 2100000.caam: job rings = 2, qi = 0
>[   28.283521] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
>[   28.293111] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
>[   28.324116] ci_hdrc ci_hdrc.0: EHCI Host Controller
>[   28.329939] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
>[   28.345547] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
>[   28.351450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[   28.358382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   28.365802] usb usb1: Product: EHCI Host Controller
>[   28.370829] usb usb1: Manufacturer: Linux 4.5.0-0.rc7.git0.2.fc24.armv7hl ehci_hcd
>[   28.378537] usb usb1: SerialNumber: ci_hdrc.0
>[   28.384264] hub 1-0:1.0: USB hub found
>[   28.388238] hub 1-0:1.0: 1 port detected
>[   28.397805] ci_hdrc ci_hdrc.1: EHCI Host Controller
>[   28.403401] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
>[   28.420530] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
>[   28.426345] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[   28.433263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   28.440631] usb usb2: Product: EHCI Host Controller
>[   28.445586] usb usb2: Manufacturer: Linux 4.5.0-0.rc7.git0.2.fc24.armv7hl ehci_hcd
>[   28.453276] usb usb2: SerialNumber: ci_hdrc.1
>[   28.459000] hub 2-0:1.0: USB hub found
>[   28.462900] hub 2-0:1.0: 1 port detected
>[[0;32m  OK  [0m] Found device /dev/disk/by-uuid/61128347-ed1c-4492-b728-4e79c258354a.

>         Activating swap /dev/disk/by-uuid/6...7-ed1c-4492-b728-4e79c258354a...

>[   28.775615] usb 2-1: new high-speed USB device number 2 using ci_hdrc
>[   28.834258] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>[   28.840950] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>[[0;32m  OK  [0m] Found device /dev/disk/by-uuid/ac7b6c7a-c3d2-4524-86dc-c1a68d65b576.

>[   28.867837] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>[   28.874486] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>[   28.881533] usbcore: registered new interface driver brcmfmac
>[   28.883796] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>[   28.883806] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>[[0;32m  OK  [0m] Listening on [   28.907695] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>Load/Save RF Kill Switch Status /[   28.914861] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>dev/rfkill Watch.

>[   28.925729] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>[   28.927925] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
>[   28.927934] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[   28.927941] usb 2-1: Product: USB2.0 Hub
>[   28.929012] hub 2-1:1.0: USB hub found
>[   28.929295] hub 2-1:1.0: 4 ports detected
>[   28.958284] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>[   28.959491] brcmfmac_sdio mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.txt failed with error -2
>[   28.977127] imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
>[   28.983790] imx-spdif sound-spdif: snd_soc_register_card failed: -517
>%G[   28.997866] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
>[   29.007372] fsl-asrc 2034000.asrc: driver registered
>[   29.008440] Adding 249852k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:249852k SSFS
>[[0;32m  OK  [0m] Activated swap /dev/disk/by-uuid/61128347-ed1c-4492-b728-4e79c258354a.

>[[0;32m  OK  [0m] Reached target Sound Card.

>[[0;32m  OK  [0m] Reached target Swap.

>[   29.200519] usb 2-1.1: new full-speed USB device number 3 using ci_hdrc
>[   29.296936] usb 2-1.1: New USB device found, idVendor=0d8c, idProduct=000c
>[   29.303886] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[   29.311293] usb 2-1.1: Product: C-Media USB Audio Device   
>[   29.321037] input: C-Media USB Audio Device    as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.3/0003:0D8C:000C.0001/input/input2
>[   29.391205] hid-generic 0003:0D8C:000C.0001: input,hidraw0: USB HID v1.00 Device [C-Media USB Audio Device   ] on usb-ci_hdrc.1-1.1/input3
>[   29.475531] usb 2-1.2: new low-speed USB device number 4 using ci_hdrc
>[   29.576932] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c312
>[   29.583877] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   29.591268] usb 2-1.2: Product: USB Multimedia Keyboard
>[   29.596567] usb 2-1.2: Manufacturer: LITEON Technology
>[   29.607094] input: LITEON Technology USB Multimedia Keyboard as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C312.0002/input/input3
>[   29.676700] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-ci_hdrc.1-1.2/input0
>[   29.760527] usb 2-1.3: new low-speed USB device number 5 using ci_hdrc
>[   29.861052] usb 2-1.3: New USB device found, idVendor=045e, idProduct=0039
>[   29.867994] usb 2-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>[   29.875387] usb 2-1.3: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
>[   29.882505] usb 2-1.3: Manufacturer: Microsoft
>[   29.891737] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.3/2-1.3:1.0/0003:045E:0039.0003/input/input4
>[   29.909890] hid-generic 0003:045E:0039.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-ci_hdrc.1-1.3/input0
>[   29.966024] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
>[   30.355683] usbcore: registered new interface driver snd-usb-audio
>[   30.551169] audit: type=1130 audit(1455208105.890:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started udev Wait for Complete Device Initialization.

>         Starting Activation of DM RAID sets...

>[[0;32m  OK  [0m] [   30.782937] audit: type=1130 audit(1455208106.120:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>Started Activation of DM RAID set[   30.806115] audit: type=1131 audit(1455208106.145:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>s.

>[[0;32m  OK  [0m] Reached target Encrypted Volumes.

>[[0;32m  OK  [0m] Reached target Local File Systems (Pre).

>         Mounting /boot...

>[   30.980742] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
>[   30.992624] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
>[[0;32m  OK  [0m] Mounted /boot.

>[[0;32m  OK  [0m] Reached target Local File Systems.

>         Starting Tell Plymouth To Write Out Runtime Data...

>         Starting Import network configuration from initramfs...

>         Starting Restore /run/initramfs on shutdown...

>         Starting Rebuild Journal Catalog...

>[[0;32m  OK  [0m] Started Tell Plymouth To Write Out Runtime Da[   31.120731] audit: type=1130 audit(1455208106.460:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>ta.

>[   31.143365] audit: type=1131 audit(1455208106.480:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Resto[   31.170290] audit: type=1130 audit(1455208106.505:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>re /run/initramfs on shutdown.

>[[0;32m  OK  [0m] Started Rebui[   31.285258] audit: type=1130 audit(1455208106.620:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>ld Journal Catalog.

>[   32.198430] audit: type=1130 audit(1455208107.535:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Import network configuration from initramfs.

>         Starting Create Volatile Files and Directories...

>[   32.503774] audit: type=1130 audit(1455208107.840:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[[0;32m  OK  [0m] Started Create Volatile Files and Directories.

>         Starting Security Auditing Service...

>[   32.631356] audit: type=1305 audit(1455208107.970:87): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[   32.645082] audit: type=1305 audit(1455208107.980:88): audit_pid=722 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[[0;32m  OK  [0m] Started Rebuild Dynamic Linker Cache.

>         Starting Update is Completed...

>[[0;32m  OK  [0m] Started Update is Completed.

>[[0;32m  OK  [0m] Started Security Auditing Service.

>         Starting Update UTMP about System Boot/Shutdown...

>[[0;32m  OK  [0m] Started Update UTMP about System Boot/Shutdown.

>[[0;32m  OK  [0m] Reached target System Initialization.

>[[0;32m  OK  [0m] Listening on Open-iSCSI iscsiuio Socket.

>[[0;32m  OK  [0m] Listening on D-Bus System Message Bus Socket.

>[[0;32m  OK  [0m] Started Daily Cleanup of Temporary Directories.

>[[0;32m  OK  [0m] Listening on Open-iSCSI iscsid Socket.

>[[0;32m  OK  [0m] Reached target Sockets.

>[[0;32m  OK  [0m] Started dnf makecache timer.

>[[0;32m  OK  [0m] Reached target Timers.

>[[0;32m  OK  [0m] Reached target Basic System.

>         Starting OpenSSH Server Key Generation...

>         Starting Login Service...

>         Starting NTP client/server...

>[[0;32m  OK  [0m] Started D-Bus System Message Bus.

>         Starting firewalld - dynamic firewall daemon...

>         Starting Initial Setup configuration program...

>[   37.899547] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   38.061525] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   38.415786] Ebtables v2.0 registered
>[   38.534069] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[   40.413072] Netfilter messages via NETLINK v0.30.
>[   40.463044] ip_set: protocol 6
>[   42.135185] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   42.216608] Atheros 8035 ethernet 2188000.ethernet:04: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:04, irq=-1)
>[   42.233683] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

Actions: View

Attachments on bug 1321886: 1141184 | 1141185 | 1141186 | 1141187