Attachment 1167786 Details for Bug 1346153 – dmesg log

dmesg log

dmesg.txt (text/plain), 83.34 KB, created by Alpus Chen on 2016-06-14 06:44:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alpus Chen

Created: 2016-06-14 06:44:35 UTC

Size: 83.34 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-642.el6.x86_64 (mockbuild@x86-033.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC) ) #1 SMP Wed Apr 13 00:51:26 EDT 2016
>Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap rd_LVM_LV=VolGroup/lv_root SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000005f5c7000 (usable)
> BIOS-e820: 000000005f5c7000 - 000000005f5d6000 (reserved)
> BIOS-e820: 000000005f5d6000 - 0000000064881000 (usable)
> BIOS-e820: 0000000064881000 - 0000000074902000 (reserved)
> BIOS-e820: 0000000074902000 - 0000000076b69000 (usable)
> BIOS-e820: 0000000076b69000 - 0000000076b9b000 (reserved)
> BIOS-e820: 0000000076b9b000 - 0000000077b9e000 (usable)
> BIOS-e820: 0000000077b9e000 - 00000000793ff000 (reserved)
> BIOS-e820: 00000000793ff000 - 000000007b3ff000 (ACPI NVS)
> BIOS-e820: 000000007b3ff000 - 000000007b794000 (ACPI data)
> BIOS-e820: 000000007b794000 - 000000007b800000 (usable)
> BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000480000000 (usable)
>EFI v2.31 by EDK II
>                             BIOS ID: 0
> ACPI=0x7b793000  ACPI 2.0=0x7b793014  SMBIOS=0x793fc000 
>EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
>EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000001e000) (0MB)
>EFI: mem02: type=2, attr=0xf, range=[0x000000000001e000-0x0000000000020000) (0MB)
>EFI: mem03: type=3, attr=0xf, range=[0x0000000000020000-0x000000000009f000) (0MB)
>EFI: mem04: type=4, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
>EFI: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000800000) (7MB)
>EFI: mem06: type=3, attr=0xf, range=[0x0000000000800000-0x0000000001000000) (8MB)
>EFI: mem07: type=7, attr=0xf, range=[0x0000000001000000-0x000000005aa9d000) (1434MB)
>EFI: mem08: type=2, attr=0xf, range=[0x000000005aa9d000-0x000000005d08f000) (37MB)
>EFI: mem09: type=7, attr=0xf, range=[0x000000005d08f000-0x000000005d0db000) (0MB)
>EFI: mem10: type=2, attr=0xf, range=[0x000000005d0db000-0x000000005d735000) (6MB)
>EFI: mem11: type=1, attr=0xf, range=[0x000000005d735000-0x000000005d776000) (0MB)
>EFI: mem12: type=7, attr=0xf, range=[0x000000005d776000-0x000000005d7ad000) (0MB)
>EFI: mem13: type=2, attr=0xf, range=[0x000000005d7ad000-0x000000005d7b5000) (0MB)
>EFI: mem14: type=4, attr=0xf, range=[0x000000005d7b5000-0x000000005f5c7000) (30MB)
>EFI: mem15: type=11, attr=0xf, range=[0x000000005f5c7000-0x000000005f5d6000) (0MB)
>EFI: mem16: type=4, attr=0xf, range=[0x000000005f5d6000-0x0000000064881000) (82MB)
>EFI: mem17: type=6, attr=0x800000000000000f, range=[0x0000000064881000-0x0000000074902000) (256MB)
>EFI: mem18: type=4, attr=0xf, range=[0x0000000074902000-0x0000000076b69000) (34MB)
>EFI: mem19: type=6, attr=0x800000000000000f, range=[0x0000000076b69000-0x0000000076b9b000) (0MB)
>EFI: mem20: type=4, attr=0xf, range=[0x0000000076b9b000-0x0000000076b9e000) (0MB)
>EFI: mem21: type=7, attr=0xf, range=[0x0000000076b9e000-0x0000000077183000) (5MB)
>EFI: mem22: type=3, attr=0xf, range=[0x0000000077183000-0x0000000077b9e000) (10MB)
>EFI: mem23: type=6, attr=0x800000000000000f, range=[0x0000000077b9e000-0x0000000077f9e000) (4MB)
>EFI: mem24: type=5, attr=0x800000000000000f, range=[0x0000000077f9e000-0x000000007839e000) (4MB)
>EFI: mem25: type=0, attr=0xf, range=[0x000000007839e000-0x00000000793ff000) (16MB)
>EFI: mem26: type=10, attr=0xf, range=[0x00000000793ff000-0x000000007b3ff000) (32MB)
>EFI: mem27: type=9, attr=0xf, range=[0x000000007b3ff000-0x000000007b794000) (3MB)
>EFI: mem28: type=4, attr=0xf, range=[0x000000007b794000-0x000000007b800000) (0MB)
>EFI: mem29: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
>EFI: mem30: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
>EFI: mem31: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
>EFI: mem32: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
>SMBIOS version 2.8 @ 0x793FC000
>SMBIOS 2.8 present.
>DMI: LNVO Lenovo NeXtScale nx360 M5 -[5465AC1]-/00KF542, BIOS -[THE107FUS-1.20]- 03/09/2015
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x480000 max_arch_pfn = 0x400000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0x7b800 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-000000007b800000
> 0000000000 - 0040000000 page 1G
> 0040000000 - 007b800000 page 2M
>kernel direct mapping tables up to 7b800000 @ 8000-a000
>Use unified mapping for non-reserved e820 regions.
>init_memory_mapping: 0000000100000000-0000000480000000
> 0100000000 - 0480000000 page 1G
>kernel direct mapping tables up to 480000000 @ 9000-a000
>RAMDISK: 5b07e000 - 5c8f8cd2
>ACPI: Deleted _OSI()
>ACPI: Deleted _OSI()
>ACPI: RSDP 000000007b793014 00024 (v02 LENOVO)
>ACPI: XSDT 000000007b792188 000FC (v01 LENOVO SYSTEM_X 00000000      01000013)
>ACPI: FACP 000000007b78e000 000F4 (v04 LENOVO SYSTEM_X 00000000 MSFT 20091019)
>ACPI: DSDT 000000007b75f000 26C94 (v02 LENOVO SYSTEM_X 00000003 MSFT 20091015)
>ACPI: FACS 000000007b3e7000 00040
>ACPI: TCPA 000000007b791000 00064 (v02 INTEL  EDK2     00000002      01000013)
>ACPI: SSDT 000000007b790000 003A2 (v01 INTEL  TcgTable 00001000 INTL 20130328)
>ACPI: UEFI 000000007b3df000 00042 (v01 INTEL  EDK2     00000002      01000013)
>ACPI: BDAT 000000007b78f000 00030 (v01 LENOVO SYSTEM_X 00000000 MSFT 20091013)
>ACPI: HPET 000000007b78d000 00038 (v01 LENOVO SYSTEM_X 00000001 MSFT 20091017)
>ACPI: APIC 000000007b78c000 001EA (v03 LENOVO SYSTEM_X 00000000 MSFT 20091014)
>ACPI: MCFG 000000007b78b000 0003C (v01 LENOVO SYSTEM_X 00000001 MSFT 20091013)
>ACPI: MSCT 000000007b78a000 00090 (v01 LENOVO SYSTEM_X 00000001 MSFT 20091013)
>ACPI: PMCT 000000007b789000 00064 (v01 LENOVO SYSTEM_X 00000000 MSFT 20091013)
>ACPI: SLIT 000000007b788000 0006C (v01 LENOVO SYSTEM_X 00000001 MSFT 20091020)
>ACPI: SRAT 000000007b787000 003A8 (v03 LENOVO SYSTEM_X 00000001 MSFT 2009101A)
>ACPI: WDDT 000000007b786000 00040 (v01 LENOVO SYSTEM_X 00000000 MSFT 20091013)
>ACPI: OEM0 000000007b75e000 00428 (v03 LENOVO XSECSRAT 00000100 MSFT 20091022)
>ACPI: OEM1 000000007b75d000 00030 (v01 LENOVO LNVGYERR 00000003 MSFT 20091013)
>ACPI: SLIC 000000007b75c000 00176 (v01 LENOVO SYSTEM_X 00000000 MSFT 2009101F)
>ACPI: SSDT 000000007b75b000 00961 (v02 LENOVO CPUSCOPE 00004000 INTL 20091016)
>ACPI: SSDT 000000007b753000 07794 (v02 LENOVO PSTATEPM 00004000 INTL 20091016)
>ACPI: SSDT 000000007b751000 016F2 (v02 LENOVO CPUCSTAT 00004000 INTL 20091016)
>ACPI: SSDT 000000007b74f000 016F1 (v02 LENOVO SpsNm    00000001 INTL 01000016)
>ACPI: SSDT 000000007b74e000 00064 (v02  INTEL SpsNvs   00000002 INTL 20130328)
>ACPI: PRAD 000000007b74d000 00102 (v02  INTEL SpsPrAgg 00000002 INTL 20130328)
>ACPI: DMAR 000000007b74c000 000B8 (v01 LENOVO SYSTEM_X 00000001 MSFT 20091021)
>ACPI: HEST 000000007b74b000 00230 (v01 INTEL           00000001 INTL 00000001)
>ACPI: BERT 000000007b74a000 00030 (v01 INTEL           00000001 INTL 00000001)
>ACPI: ERST 000000007b749000 00230 (v01 INTEL           00000001 INTL 00000001)
>ACPI: EINJ 000000007b748000 00150 (v01 INTEL           00000001 INTL 00000001)
>ACPI: Local APIC address 0xfee00000
>system APIC only can use physical flat
>Setting APIC routing to physical flat.
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 2 -> Node 0
>SRAT: PXM 0 -> APIC 4 -> Node 0
>SRAT: PXM 0 -> APIC 6 -> Node 0
>SRAT: PXM 0 -> APIC 8 -> Node 0
>SRAT: PXM 0 -> APIC 10 -> Node 0
>SRAT: PXM 0 -> APIC 16 -> Node 0
>SRAT: PXM 0 -> APIC 18 -> Node 0
>SRAT: PXM 0 -> APIC 20 -> Node 0
>SRAT: PXM 0 -> APIC 22 -> Node 0
>SRAT: PXM 0 -> APIC 24 -> Node 0
>SRAT: PXM 0 -> APIC 26 -> Node 0
>SRAT: PXM 1 -> APIC 32 -> Node 1
>SRAT: PXM 1 -> APIC 34 -> Node 1
>SRAT: PXM 1 -> APIC 36 -> Node 1
>SRAT: PXM 1 -> APIC 38 -> Node 1
>SRAT: PXM 1 -> APIC 40 -> Node 1
>SRAT: PXM 1 -> APIC 42 -> Node 1
>SRAT: PXM 1 -> APIC 48 -> Node 1
>SRAT: PXM 1 -> APIC 50 -> Node 1
>SRAT: PXM 1 -> APIC 52 -> Node 1
>SRAT: PXM 1 -> APIC 54 -> Node 1
>SRAT: PXM 1 -> APIC 56 -> Node 1
>SRAT: PXM 1 -> APIC 58 -> Node 1
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 0 -> APIC 3 -> Node 0
>SRAT: PXM 0 -> APIC 5 -> Node 0
>SRAT: PXM 0 -> APIC 7 -> Node 0
>SRAT: PXM 0 -> APIC 9 -> Node 0
>SRAT: PXM 0 -> APIC 11 -> Node 0
>SRAT: PXM 0 -> APIC 17 -> Node 0
>SRAT: PXM 0 -> APIC 19 -> Node 0
>SRAT: PXM 0 -> APIC 21 -> Node 0
>SRAT: PXM 0 -> APIC 23 -> Node 0
>SRAT: PXM 0 -> APIC 25 -> Node 0
>SRAT: PXM 0 -> APIC 27 -> Node 0
>SRAT: PXM 1 -> APIC 33 -> Node 1
>SRAT: PXM 1 -> APIC 35 -> Node 1
>SRAT: PXM 1 -> APIC 37 -> Node 1
>SRAT: PXM 1 -> APIC 39 -> Node 1
>SRAT: PXM 1 -> APIC 41 -> Node 1
>SRAT: PXM 1 -> APIC 43 -> Node 1
>SRAT: PXM 1 -> APIC 49 -> Node 1
>SRAT: PXM 1 -> APIC 51 -> Node 1
>SRAT: PXM 1 -> APIC 53 -> Node 1
>SRAT: PXM 1 -> APIC 55 -> Node 1
>SRAT: PXM 1 -> APIC 57 -> Node 1
>SRAT: PXM 1 -> APIC 59 -> Node 1
>SRAT: Node 0 PXM 0 0-80000000
>SRAT: Node 0 PXM 0 100000000-280000000
>SRAT: Node 1 PXM 1 280000000-480000000
>NUMA: Using 31 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000280000000
>  NODE_DATA [0000000000009000 - 000000000003cfff]
>  bootmap [000000000003d000 -  000000000008cfff] pages 50
>(9 early reservations) ==> bootmem [0000000000 - 0280000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0002044924]    TEXT DATA BSS ==> [0001000000 - 0002044924]
>  #3 [005b07e000 - 005c8f8cd2]          RAMDISK ==> [005b07e000 - 005c8f8cd2]
>  #4 [000009d000 - 0000100000]    BIOS reserved ==> [000009d000 - 0000100000]
>  #5 [005d7b2000 - 005d7b2630]       EFI memmap ==> [005d7b2000 - 005d7b2630]
>  #6 [0002045000 - 00020456b6]              BRK ==> [0002045000 - 00020456b6]
>  #7 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>  #8 [0000001000 - 000000106c]        ACPI SLIT ==> [0000001000 - 000000106c]
>Bootmem setup node 1 0000000280000000-0000000480000000
>  NODE_DATA [0000000280000040 - 000000028003403f]
>  bootmap [0000000280035000 -  0000000280074fff] pages 40
>(9 early reservations) ==> bootmem [0280000000 - 0480000000]
>  #0 [0000000000 - 0000001000]   BIOS data page
>  #1 [0000006000 - 0000008000]       TRAMPOLINE
>  #2 [0001000000 - 0002044924]    TEXT DATA BSS
>  #3 [005b07e000 - 005c8f8cd2]          RAMDISK
>  #4 [000009d000 - 0000100000]    BIOS reserved
>  #5 [005d7b2000 - 005d7b2630]       EFI memmap
>  #6 [0002045000 - 00020456b6]              BRK
>  #7 [0000008000 - 0000009000]          PGTABLE
>  #8 [0000001000 - 000000106c]        ACPI SLIT
> [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
> [ffffea0008c00000-ffffea000fbfffff] PMD -> [ffff880280200000-ffff8802871fffff] on node 1
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00480000
>Movable zone start PFN for each node
>early_node_map[8] active PFN ranges
>    0: 0x00000001 -> 0x000000a0
>    0: 0x00000100 -> 0x0005f5c7
>    0: 0x0005f5d6 -> 0x00064881
>    0: 0x00074902 -> 0x00076b69
>    0: 0x00076b9b -> 0x00077b9e
>    0: 0x0007b794 -> 0x0007b800
>    0: 0x00100000 -> 0x00280000
>    1: 0x00280000 -> 0x00480000
>On node 0 totalpages: 1997543
>  DMA zone: 56 pages used for memmap
>  DMA zone: 103 pages reserved
>  DMA zone: 3840 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 406400 pages, LIFO batch:31
>  Normal zone: 21504 pages used for memmap
>  Normal zone: 1551360 pages, LIFO batch:31
>On node 1 totalpages: 2097152
>  Normal zone: 28672 pages used for memmap
>  Normal zone: 2068480 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>system APIC only can use physical flat
>Setting APIC routing to physical flat.
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] enabled)
>ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] enabled)
>ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] enabled)
>ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] enabled)
>ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] enabled)
>ACPI: LAPIC (acpi_id[0x28] lapic_id[0x28] enabled)
>ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x2a] enabled)
>ACPI: LAPIC (acpi_id[0x30] lapic_id[0x30] enabled)
>ACPI: LAPIC (acpi_id[0x32] lapic_id[0x32] enabled)
>ACPI: LAPIC (acpi_id[0x34] lapic_id[0x34] enabled)
>ACPI: LAPIC (acpi_id[0x36] lapic_id[0x36] enabled)
>ACPI: LAPIC (acpi_id[0x38] lapic_id[0x38] enabled)
>ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x3a] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
>ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] enabled)
>ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] enabled)
>ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] enabled)
>ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] enabled)
>ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] enabled)
>ACPI: LAPIC (acpi_id[0x29] lapic_id[0x29] enabled)
>ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2b] enabled)
>ACPI: LAPIC (acpi_id[0x31] lapic_id[0x31] enabled)
>ACPI: LAPIC (acpi_id[0x33] lapic_id[0x33] enabled)
>ACPI: LAPIC (acpi_id[0x35] lapic_id[0x35] enabled)
>ACPI: LAPIC (acpi_id[0x37] lapic_id[0x37] enabled)
>ACPI: LAPIC (acpi_id[0x39] lapic_id[0x39] enabled)
>ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3b] enabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
>ACPI: IOAPIC (id[0x0a] address[0xfec40000] gsi_base[48])
>IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 48 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 72
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>PM: Registered nosave memory: 000000005f5c7000 - 000000005f5d6000
>PM: Registered nosave memory: 0000000064881000 - 0000000074902000
>PM: Registered nosave memory: 0000000076b69000 - 0000000076b9b000
>PM: Registered nosave memory: 0000000077b9e000 - 00000000793ff000
>PM: Registered nosave memory: 00000000793ff000 - 000000007b3ff000
>PM: Registered nosave memory: 000000007b3ff000 - 000000007b794000
>PM: Registered nosave memory: 000000007b800000 - 0000000080000000
>PM: Registered nosave memory: 0000000080000000 - 0000000090000000
>PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:4096 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:2
>PERCPU: Embedded 31 pages/cpu @ffff88002f600000 s96600 r8192 d22184 u131072
>pcpu-alloc: s96600 r8192 d22184 u131072 alloc=1*2097152
>pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 24 25 26 27 
>pcpu-alloc: [0] 28 29 30 31 32 33 34 35 -- -- -- -- -- -- -- -- 
>pcpu-alloc: [1] 12 13 14 15 16 17 18 19 20 21 22 23 36 37 38 39 
>pcpu-alloc: [1] 40 41 42 43 44 45 46 47 -- -- -- -- -- -- -- -- 
>Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 4030080
>Policy zone: Normal
>Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap rd_LVM_LV=VolGroup/lv_root SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>Memory: 15873340k/18874368k available (5455k kernel code, 2495588k absent, 505440k reserved, 6964k data, 1316k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:1608
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>allocated 66584576 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2500.242 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.48 BogoMIPS (lpj=2500242)
>pid_max: default: 49152 minimum: 384
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 22 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 22342 entries in 88 pages
>dmar: Host address width 46
>dmar: DRHD base: 0x000000fbffc000 flags: 0x0
>dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
>dmar: DRHD base: 0x000000c7ffc000 flags: 0x1
>dmar: IOMMU 1: reg_base_addr c7ffc000 ver 1:0 cap d2078c106f0466 ecap f020df
>dmar: RMRR base: 0x00000078e76000 end: 0x00000078e78fff
>dmar: ATSR flags: 0x0
>IOAPIC id 10 under DRHD base 0xfbffc000
>IOAPIC id 8 under DRHD base 0xc7ffc000
>IOAPIC id 9 under DRHD base 0xc7ffc000
>HPET id 0 under DRHD base 0xc7ffc000
>Enabled IRQ remapping in x2apic mode
>Enabling x2apic
>Enabled x2apic
>System requires x2apic physical mode
>APIC routing finalized to physical x2apic.
>  alloc irq_desc for 72 on node 0
>  alloc kstat_irqs on node 0
>  alloc irq_desc for 73 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz stepping 02
>Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             0000ffffffffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
>Booting Node   1, Processors  #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 Ok.
>Booting Node   0, Processors  #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 Ok.
>Booting Node   1, Processors  #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47 Ok.
>Brought up 48 CPUs
>Total of 48 processors activated (239996.49 BogoMIPS).
>sizeof(vma)=200 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=592 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2672 bytes
>devtmpfs: initialized
>PM: Registering ACPI NVS region at 793ff000 (33554432 bytes)
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
>PCI: MCFG area at 80000000 reserved in E820
>PCI: Using MMCONFIG at 80000000 - 8fffffff
>PCI: Using configuration type 1 for base access
>PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: BIOS offers _GTS
>ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Enabling Firmware First mode for corrected errors.
>HEST: Table parsing has been initialized.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x1000-0x7fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff]
>pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xc7ffbfff]
>pci_root PNP0A08:00: host bridge window [mem 0x38000000000-0x3bfffffffff]
>pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x1000-0x7fff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff]
>pci_bus 0000:00: root bus resource [mem 0x38000000000-0x3bfffffffff]
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:05.4: reg 10: [mem 0x922fc000-0x922fcfff]
>pci 0000:00:11.0: reg 30: [mem 0xffff0000-0xffffffff pref]
>pci 0000:00:14.0: reg 10: [mem 0x38000010000-0x3800001ffff 64bit]
>pci 0000:00:14.0: PME# supported from D3hot D3cold
>pci 0000:00:14.0: PME# disabled
>pci 0000:00:16.0: reg 10: [mem 0x3800000c000-0x3800000c00f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:16.1: reg 10: [mem 0x3800000d000-0x3800000d00f 64bit]
>pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.1: PME# disabled
>pci 0000:00:1a.0: reg 10: [mem 0x922fe000-0x922fe3ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 10: [mem 0x922ff000-0x922ff3ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0x3800000e000-0x3800000e0ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x1fe0-0x1fff]
>pci 0000:00:1f.6: reg 10: [mem 0x00000000-0x00000fff 64bit]
>pci 0000:01:00.0: reg 10: [io  0x2e00-0x2eff]
>pci 0000:01:00.0: reg 14: [mem 0x923f0000-0x923fffff 64bit]
>pci 0000:01:00.0: reg 30: [mem 0xfff00000-0xffffffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: reg 174: [mem 0x92400000-0x9240ffff 64bit]
>pci 0000:00:01.0: PCI bridge to [bus 01-05]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0x92300000-0x924fffff]
>pci 0000:00:02.0: PCI bridge to [bus 06-0a]
>pci 0000:0b:00.0: reg 10: [mem 0x94000000-0x97ffffff 64bit]
>pci 0000:0b:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>pci 0000:0b:00.0: PME# supported from D0
>pci 0000:0b:00.0: PME# disabled
>pci 0000:00:03.0: PCI bridge to [bus 0b-0f]
>pci 0000:00:03.0:   bridge window [mem 0x94000000-0x97ffffff]
>pci 0000:10:00.0: reg 10: [mem 0x925c0000-0x925cffff 64bit pref]
>pci 0000:10:00.0: reg 18: [mem 0x925b0000-0x925bffff 64bit pref]
>pci 0000:10:00.0: reg 20: [mem 0x925a0000-0x925affff 64bit pref]
>pci 0000:10:00.0: reg 30: [mem 0xfffc0000-0xffffffff pref]
>pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:10:00.0: PME# disabled
>pci 0000:10:00.1: reg 10: [mem 0x925f0000-0x925fffff 64bit pref]
>pci 0000:10:00.1: reg 18: [mem 0x925e0000-0x925effff 64bit pref]
>pci 0000:10:00.1: reg 20: [mem 0x925d0000-0x925dffff 64bit pref]
>pci 0000:10:00.1: reg 30: [mem 0xfffc0000-0xffffffff pref]
>pci 0000:10:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:10:00.1: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 10-10]
>pci 0000:00:1c.0:   bridge window [mem 0x92500000-0x925fffff 64bit pref]
>pci 0000:11:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:11:00.0: PME# disabled
>pci 0000:00:1c.2: PCI bridge to [bus 11-15]
>pci 0000:00:1c.2:   bridge window [mem 0x92600000-0x92ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:12:00.0: PME# disabled
>pci 0000:12:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:12:01.0: PME# disabled
>pci 0000:11:00.0: PCI bridge to [bus 12-15]
>pci 0000:11:00.0:   bridge window [mem 0x92600000-0x92ffffff]
>pci 0000:11:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:12:00.0: PCI bridge to [bus 13-14]
>pci 0000:12:00.0:   bridge window [mem 0x92700000-0x92ffffff]
>pci 0000:12:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:14:00.0: reg 10: [mem 0x93000000-0x93ffffff pref]
>pci 0000:14:00.0: reg 14: [mem 0x927fc000-0x927fffff]
>pci 0000:14:00.0: reg 18: [mem 0x92800000-0x92ffffff]
>pci 0000:13:00.0: PCI bridge to [bus 14-14]
>pci 0000:13:00.0:   bridge window [mem 0x92700000-0x92ffffff]
>pci 0000:13:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:12:01.0: PCI bridge to [bus 15-15]
>pci 0000:12:01.0:   bridge window [mem 0x92600000-0x926fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1A._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR2A._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3A._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC control (0x15) granted
>ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
>pci_root PNP0A08:01: host bridge window [io  0x8000-0xffff]
>pci_root PNP0A08:01: host bridge window [mem 0xc8000000-0xfbffbfff]
>pci_root PNP0A08:01: host bridge window [mem 0x3c000000000-0x3ffffffffff]
>PCI host bridge to bus 0000:80
>pci_bus 0000:80: root bus resource [io  0x8000-0xffff]
>pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff]
>pci_bus 0000:80: root bus resource [mem 0x3c000000000-0x3ffffffffff]
>pci 0000:80:05.4: reg 10: [mem 0xc8000000-0xc8000fff]
>pci_bus 0000:80: on NUMA node 1
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
> pci0000:80: Requesting ACPI _OSC control (0x1d)
> pci0000:80: ACPI _OSC control (0x15) granted
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:14:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:14:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>  alloc irq_desc for 74 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>  alloc irq_desc for 75 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>  alloc irq_desc for 76 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>  alloc irq_desc for 77 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>  alloc irq_desc for 78 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>HPET: 8 timers in total, 5 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>hpet: hpet2 irq 74 for MSI
>hpet: hpet3 irq 75 for MSI
>hpet: hpet4 irq 76 for MSI
>hpet: hpet5 irq 77 for MSI
>hpet: hpet6 irq 78 for MSI
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfec00000-0xfecfffff]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0081-0x0083]
>pnp 00:02: [io  0x0087]
>pnp 00:02: [io  0x0089-0x008b]
>pnp 00:02: [io  0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [io  0x0074-0x0077]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [mem 0xfed00000-0xfed003ff]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:07: [io  0x0500-0x053f]
>pnp 00:07: [io  0x0400-0x047f]
>pnp 00:07: [io  0x0092]
>pnp 00:07: [io  0x0010-0x001f]
>pnp 00:07: [io  0x0072-0x0073]
>pnp 00:07: [io  0x0080]
>pnp 00:07: [io  0x0084-0x0086]
>pnp 00:07: [io  0x0088]
>pnp 00:07: [io  0x008c-0x008e]
>pnp 00:07: [io  0x0090-0x009f]
>pnp 00:07: [io  0x0540-0x057f]
>pnp 00:07: [io  0x0600-0x061f]
>pnp 00:07: [io  0x0880-0x0883]
>pnp 00:07: [io  0x0800-0x081f]
>pnp 00:07: [mem 0xfed1c000-0xfed3ffff]
>pnp 00:07: [mem 0xfed45000-0xfed8bfff]
>pnp 00:07: [mem 0xff000000-0xffffffff]
>pnp 00:07: [mem 0xfee00000-0xfeefffff]
>pnp 00:07: [mem 0xfed12000-0xfed1200f]
>pnp 00:07: [mem 0xfed12010-0xfed1201f]
>pnp 00:07: [mem 0xfed1b000-0xfed1bfff]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [io  0x0cc0]
>pnp 00:08: [io  0x0cc1]
>pnp 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
>pnp 00:09: [io  0x03f8-0x03ff]
>pnp 00:09: [irq 4]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0a: [io  0x02f8-0x02ff]
>pnp 00:0a: [irq 3]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:0c: [mem 0xfed40000-0xfed44fff]
>pnp 00:0c: Plug and Play ACPI device, IDs PNP0c31 (active)
>pnp 00:0d: [mem 0xc7ffc000-0xc7ffefff]
>pnp 00:0d: [mem 0xfbffc000-0xfbffefff]
>pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:07: [io  0x0500-0x053f] has been reserved
>system 00:07: [io  0x0400-0x047f] has been reserved
>system 00:07: [io  0x0540-0x057f] has been reserved
>system 00:07: [io  0x0600-0x061f] has been reserved
>system 00:07: [io  0x0880-0x0883] has been reserved
>system 00:07: [io  0x0800-0x081f] has been reserved
>system 00:07: [mem 0xfed1c000-0xfed3ffff] could not be reserved
>system 00:07: [mem 0xfed45000-0xfed8bfff] has been reserved
>system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:07: [mem 0xfed12000-0xfed1200f] has been reserved
>system 00:07: [mem 0xfed12010-0xfed1201f] has been reserved
>system 00:07: [mem 0xfed1b000-0xfed1bfff] has been reserved
>system 00:08: [io  0x0cc0] has been reserved
>system 00:08: [io  0x0cc1] has been reserved
>system 00:0d: [mem 0xc7ffc000-0xc7ffefff] could not be reserved
>system 00:0d: [mem 0xfbffc000-0xfbffefff] could not be reserved
>pci 0000:00:11.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
>pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
>pci 0000:0b:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>pci 0000:10:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
>pci 0000:10:00.1: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
>pci 0000:00:01.0: BAR 15: assigned [mem 0x90000000-0x900fffff pref]
>pci 0000:00:03.0: BAR 15: assigned [mem 0x90100000-0x901fffff pref]
>pci 0000:00:1c.0: BAR 14: assigned [mem 0x90200000-0x902fffff]
>pci 0000:00:11.0: BAR 6: assigned [mem 0x90300000-0x9030ffff pref]
>pci 0000:00:1f.6: BAR 0: assigned [mem 0x90310000-0x90310fff 64bit]
>pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x900fffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-05]
>pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [mem 0x92300000-0x924fffff]
>pci 0000:00:01.0:   bridge window [mem 0x90000000-0x900fffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 06-0a]
>pci 0000:0b:00.0: BAR 6: assigned [mem 0x90100000-0x9011ffff pref]
>pci 0000:00:03.0: PCI bridge to [bus 0b-0f]
>pci 0000:00:03.0:   bridge window [mem 0x94000000-0x97ffffff]
>pci 0000:00:03.0:   bridge window [mem 0x90100000-0x901fffff pref]
>pci 0000:10:00.0: BAR 6: assigned [mem 0x92500000-0x9253ffff pref]
>pci 0000:10:00.1: BAR 6: assigned [mem 0x92540000-0x9257ffff pref]
>pci 0000:00:1c.0: PCI bridge to [bus 10-10]
>pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x902fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x92500000-0x925fffff 64bit pref]
>pci 0000:13:00.0: PCI bridge to [bus 14-14]
>pci 0000:13:00.0:   bridge window [mem 0x92700000-0x92ffffff]
>pci 0000:13:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:12:00.0: PCI bridge to [bus 13-14]
>pci 0000:12:00.0:   bridge window [mem 0x92700000-0x92ffffff]
>pci 0000:12:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:12:01.0: PCI bridge to [bus 15-15]
>pci 0000:12:01.0:   bridge window [mem 0x92600000-0x926fffff]
>pci 0000:11:00.0: PCI bridge to [bus 12-15]
>pci 0000:11:00.0:   bridge window [mem 0x92600000-0x92ffffff]
>pci 0000:11:00.0:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 11-15]
>pci 0000:00:1c.2:   bridge window [mem 0x92600000-0x92ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>  alloc irq_desc for 47 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pci 0000:00:01.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:02.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:03.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
>pci 0000:00:03.0: setting latency timer to 64
>  alloc irq_desc for 16 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 18 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:11:00.0: setting latency timer to 64
>pci 0000:12:00.0: setting latency timer to 64
>pci 0000:13:00.0: setting latency timer to 64
>pci 0000:12:01.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x1000-0x7fff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff]
>pci_bus 0000:00: resource 8 [mem 0x38000000000-0x3bfffffffff]
>pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:01: resource 1 [mem 0x92300000-0x924fffff]
>pci_bus 0000:01: resource 2 [mem 0x90000000-0x900fffff pref]
>pci_bus 0000:0b: resource 1 [mem 0x94000000-0x97ffffff]
>pci_bus 0000:0b: resource 2 [mem 0x90100000-0x901fffff pref]
>pci_bus 0000:10: resource 1 [mem 0x90200000-0x902fffff]
>pci_bus 0000:10: resource 2 [mem 0x92500000-0x925fffff 64bit pref]
>pci_bus 0000:11: resource 1 [mem 0x92600000-0x92ffffff]
>pci_bus 0000:11: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
>pci_bus 0000:12: resource 1 [mem 0x92600000-0x92ffffff]
>pci_bus 0000:12: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
>pci_bus 0000:13: resource 1 [mem 0x92700000-0x92ffffff]
>pci_bus 0000:13: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
>pci_bus 0000:14: resource 1 [mem 0x92700000-0x92ffffff]
>pci_bus 0000:14: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
>pci_bus 0000:15: resource 1 [mem 0x92600000-0x926fffff]
>pci_bus 0000:80: resource 4 [io  0x8000-0xffff]
>pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff]
>pci_bus 0000:80: resource 6 [mem 0x3c000000000-0x3ffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:00:14.0: enabling device (0140 -> 0142)
>  alloc irq_desc for 22 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pci 0000:00:14.0: PCI INT D -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:14.0: PCI INT D disabled
>pci 0000:00:1a.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1a.0: PCI INT C disabled
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pci 0000:00:1d.0: PCI INT C -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT C disabled
>pci 0000:14:00.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 25067k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Intel CQM monitoring enabled
>sha256_ssse3: Using AVX optimized SHA-256 implementation
>futex hash table entries: 16384 (order: 8, 1048576 bytes)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1465548168.713:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 31366
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 6C0CC6A8D8A6A38
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>- Added public key CB445E0DA3EA1F65
>- User ID: Red Hat Enterprise Linux Driver Update Program (key 4) <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 79 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
>pcieport 0000:00:02.0: setting latency timer to 64
>  alloc irq_desc for 80 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pcieport 0000:00:02.0: irq 80 for MSI/MSI-X
>pcieport 0000:00:03.0: setting latency timer to 64
>  alloc irq_desc for 81 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pcieport 0000:00:03.0: irq 81 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 82 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pcieport 0000:00:1c.0: irq 82 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>  alloc irq_desc for 83 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>pcieport 0000:00:1c.2: irq 83 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>efifb: probing for efifb
>efifb: framebuffer at 0x93000000, mapped to 0xffffc90023800000, using 3072k, total 3072k
>efifb: mode is 1024x768x32, linelength=4096, pages=1
>efifb: scrolling: redraw
>efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: EFI VGA frame buffer device
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idle
>[Firmware Bug]: No valid trip found
>ERST: Error Record Serialization Table (ERST) support is initialized.
>[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 4, disabled.
>GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>tpm_tis 00:0c: 1.2 TPM (device-id 0xFE, rev-id 2)
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input1
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 22, io mem 0x922fe000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-642.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT C -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0x922ff000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-642.el6.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: No PS/2 controller found. Probing ports directly.
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>GRE over IPv4 demultiplexor driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:03: setting system clock to 2016-06-10 08:42:51 UTC (1465548171)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1316k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 668k freed
>Freeing unused kernel memory: 1556k freed
>dracut: dracut-004-409.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
>udev: starting version 147
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>Refined TSC clocksource calibration: 2499.997 MHz.
>Switching to clocksource tsc
>usb 1-1: New USB device found, idVendor=8087, idProduct=800a
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>ACPI: WMI: Mapper loaded
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>usb 2-1: New USB device found, idVendor=8087, idProduct=8002
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>mpt3sas version 09.102.00.00-rh loaded
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
>mpt3sas 0000:01:00.0: setting latency timer to 64
>mpt3sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16063412 kB)
>mpt3sas_cm0: MSI-X vectors supported: 96, no of cores: 48, max_msix_vectors: -1
>  alloc irq_desc for 84 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 84 for MSI/MSI-X
>  alloc irq_desc for 85 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 85 for MSI/MSI-X
>  alloc irq_desc for 86 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 86 for MSI/MSI-X
>  alloc irq_desc for 87 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 87 for MSI/MSI-X
>  alloc irq_desc for 88 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 88 for MSI/MSI-X
>  alloc irq_desc for 89 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 89 for MSI/MSI-X
>  alloc irq_desc for 90 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 90 for MSI/MSI-X
>  alloc irq_desc for 91 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 91 for MSI/MSI-X
>  alloc irq_desc for 92 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 92 for MSI/MSI-X
>  alloc irq_desc for 93 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 93 for MSI/MSI-X
>  alloc irq_desc for 94 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 94 for MSI/MSI-X
>  alloc irq_desc for 95 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 95 for MSI/MSI-X
>  alloc irq_desc for 96 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 96 for MSI/MSI-X
>  alloc irq_desc for 97 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 97 for MSI/MSI-X
>  alloc irq_desc for 98 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 98 for MSI/MSI-X
>  alloc irq_desc for 99 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 99 for MSI/MSI-X
>  alloc irq_desc for 100 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 100 for MSI/MSI-X
>  alloc irq_desc for 101 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 101 for MSI/MSI-X
>  alloc irq_desc for 102 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 102 for MSI/MSI-X
>  alloc irq_desc for 103 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 103 for MSI/MSI-X
>  alloc irq_desc for 104 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 104 for MSI/MSI-X
>  alloc irq_desc for 105 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 105 for MSI/MSI-X
>  alloc irq_desc for 106 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 106 for MSI/MSI-X
>  alloc irq_desc for 107 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 107 for MSI/MSI-X
>  alloc irq_desc for 108 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 108 for MSI/MSI-X
>  alloc irq_desc for 109 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 109 for MSI/MSI-X
>  alloc irq_desc for 110 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 110 for MSI/MSI-X
>  alloc irq_desc for 111 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 111 for MSI/MSI-X
>  alloc irq_desc for 112 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 112 for MSI/MSI-X
>  alloc irq_desc for 113 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 113 for MSI/MSI-X
>  alloc irq_desc for 114 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 114 for MSI/MSI-X
>  alloc irq_desc for 115 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 115 for MSI/MSI-X
>  alloc irq_desc for 116 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 116 for MSI/MSI-X
>  alloc irq_desc for 117 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 117 for MSI/MSI-X
>  alloc irq_desc for 118 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 118 for MSI/MSI-X
>  alloc irq_desc for 119 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 119 for MSI/MSI-X
>  alloc irq_desc for 120 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 120 for MSI/MSI-X
>  alloc irq_desc for 121 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 121 for MSI/MSI-X
>  alloc irq_desc for 122 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 122 for MSI/MSI-X
>  alloc irq_desc for 123 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 123 for MSI/MSI-X
>  alloc irq_desc for 124 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 124 for MSI/MSI-X
>  alloc irq_desc for 125 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 125 for MSI/MSI-X
>  alloc irq_desc for 126 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 126 for MSI/MSI-X
>  alloc irq_desc for 127 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 127 for MSI/MSI-X
>  alloc irq_desc for 128 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 128 for MSI/MSI-X
>  alloc irq_desc for 129 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 129 for MSI/MSI-X
>  alloc irq_desc for 130 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 130 for MSI/MSI-X
>  alloc irq_desc for 131 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>mpt3sas 0000:01:00.0: irq 131 for MSI/MSI-X
>mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 84
>mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 85
>mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 86
>mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 87
>mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 88
>mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 89
>mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 90
>mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 91
>mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 92
>mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 93
>mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 94
>mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 95
>mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 96
>mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 97
>mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 98
>mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 99
>mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 100
>mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 101
>mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 102
>mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 103
>mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 104
>mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 105
>mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 106
>mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 107
>mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 108
>mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 109
>mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 110
>mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 111
>mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 112
>mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 113
>mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 114
>mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 115
>mpt3sas0-msix32: PCI-MSI-X enabled: IRQ 116
>mpt3sas0-msix33: PCI-MSI-X enabled: IRQ 117
>mpt3sas0-msix34: PCI-MSI-X enabled: IRQ 118
>mpt3sas0-msix35: PCI-MSI-X enabled: IRQ 119
>mpt3sas0-msix36: PCI-MSI-X enabled: IRQ 120
>mpt3sas0-msix37: PCI-MSI-X enabled: IRQ 121
>mpt3sas0-msix38: PCI-MSI-X enabled: IRQ 122
>mpt3sas0-msix39: PCI-MSI-X enabled: IRQ 123
>mpt3sas0-msix40: PCI-MSI-X enabled: IRQ 124
>mpt3sas0-msix41: PCI-MSI-X enabled: IRQ 125
>mpt3sas0-msix42: PCI-MSI-X enabled: IRQ 126
>mpt3sas0-msix43: PCI-MSI-X enabled: IRQ 127
>mpt3sas0-msix44: PCI-MSI-X enabled: IRQ 128
>mpt3sas0-msix45: PCI-MSI-X enabled: IRQ 129
>mpt3sas0-msix46: PCI-MSI-X enabled: IRQ 130
>mpt3sas0-msix47: PCI-MSI-X enabled: IRQ 131
>mpt3sas_cm0: iomem(0x00000000923f0000), mapped(0xffffc900237e0000), size(65536)
>mpt3sas_cm0: ioport(0x0000000000002e00), size(256)
>mpt3sas_cm0: sending message unit reset !!
>mpt3sas_cm0: message unit reset: SUCCESS
>mpt3sas_cm0: Allocated physical memory: size(23767 kB)
>mpt3sas_cm0: Current Controller Queue Depth(10123),Max Controller Queue Depth(10240)
>mpt3sas_cm0: Scatter Gather Elements per IO(128)
>mpt3sas_cm0: LSISAS3008: FWVersion(03.00.07.00), ChipRevision(0x02), BiosVersion(06.00.01.00)
>mpt3sas_cm0: Protocol=(
>Initiator
>,Target
>), 
>Capabilities=(
>TLR
>,EEDP
>,Snapshot Buffer
>,Diag Trace Buffer
>,Task Set Full
>,NCQ
>)
>scsi0 : Fusion MPT SAS Host
>mpt3sas_cm0: sending port enable !!
>mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b007152710), phys(8)
>mpt3sas_cm0: port enable: SUCCESS
>scsi 0:0:0:0: Direct-Access     ATA      SSDSC1NB400G4I   NB37 PQ: 0 ANSI: 6
>scsi 0:0:0:0: SATA: handle(0x000b), sas_addr(0x4433221106000000), phy(6), device_name(0x55cd2e404b57b0da)
>scsi 0:0:0:0: SATA: enclosure_logical_id(0x500605b007152710), slot(4)
>scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
>scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
>scsi 0:0:1:0: Direct-Access     ATA      SSDSC1NB080G4I   NB37 PQ: 0 ANSI: 6
>scsi 0:0:1:0: SATA: handle(0x000c), sas_addr(0x4433221107000000), phy(7), device_name(0x55cd2e404b47ade2)
>scsi 0:0:1:0: SATA: enclosure_logical_id(0x500605b007152710), slot(5)
>scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
>scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
>scsi 0:0:2:0: Direct-Access     ATA      SSDSC1NB400G4I   NB37 PQ: 0 ANSI: 6
>scsi 0:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221105000000), phy(5), device_name(0x55cd2e404b57b0de)
>scsi 0:0:2:0: SATA: enclosure_logical_id(0x500605b007152710), slot(6)
>scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
>scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
>scsi 0:0:3:0: Direct-Access     ATA      SSDSC1NB400G4I   NB37 PQ: 0 ANSI: 6
>scsi 0:0:3:0: SATA: handle(0x0009), sas_addr(0x4433221104000000), phy(4), device_name(0x55cd2e404b596ae3)
>scsi 0:0:3:0: SATA: enclosure_logical_id(0x500605b007152710), slot(7)
>scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
>scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
>xhci_hcd 0000:00:14.0: PCI INT D -> GSI 22 (level, low) -> IRQ 22
>xhci_hcd 0000:00:14.0: setting latency timer to 64
>xhci_hcd 0000:00:14.0: xHCI Host Controller
>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: xHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
>usb usb3: SerialNumber: 0000:00:14.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 15 ports detected
>xhci_hcd 0000:00:14.0: xHCI Host Controller
>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: xHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
>usb usb4: SerialNumber: 0000:00:14.0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
>sd 0:0:0:0: [sda] 4096-byte physical blocks
>sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:1:0: [sdb] 4096-byte physical blocks
>sd 0:0:3:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
>sd 0:0:3:0: [sdd] 4096-byte physical blocks
>sd 0:0:2:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
>sd 0:0:2:0: [sdc] 4096-byte physical blocks
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 9b 00 10 08
>sd 0:0:3:0: [sdd] Write Protect is off
>sd 0:0:3:0: [sdd] Mode Sense: 9b 00 10 08
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 9b 00 10 08
>sd 0:0:2:0: [sdc] Write Protect is off
>sd 0:0:2:0: [sdc] Mode Sense: 9b 00 10 08
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
>usb 3-1: new high speed USB device number 2 using xhci_hcd
> sdd:
> sdc:
> sdb:
> sda: unknown partition table
> unknown partition table
> unknown partition table
> sdb1 sdb2 sdb3
>sd 0:0:3:0: [sdd] Attached SCSI disk
>sd 0:0:2:0: [sdc] Attached SCSI disk
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:1:0: [sdb] Attached SCSI disk
>dracut: Scanning devices sdb3  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root 
>dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
>dracut: inactive '/dev/VolGroup/lv_home' [16.39 GiB] inherit
>dracut: inactive '/dev/VolGroup/lv_swap' [7.45 GiB] inherit
>usb 3-1: New USB device found, idVendor=0624, idProduct=0248
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1: Product: Gadget USB HUB
>usb 3-1: Manufacturer: no manufacturer
>usb 3-1: SerialNumber: 0123456789
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 6 ports detected
>usb 3-3: new full speed USB device number 3 using xhci_hcd
>EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
>dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
>dracut: Loading SELinux policy
>type=1404 audit(1465548173.844:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 306596 rules.
>usb 3-3: New USB device found, idVendor=04b3, idProduct=3016
>usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-3: Product: USB 1.1 2 port downstream low-power hub
>usb 3-3: Manufacturer: Lite-On Tech
>usb 3-3: configuration #1 chosen from 1 choice
>usb 3-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
>hub 3-3:1.0: USB hub found
>hub 3-3:1.0: 4 ports detected
>SELinux: 2048 avtab hash slots, 306596 rules.
>usb 3-4: new high speed USB device number 4 using xhci_hcd
>usb 3-4: New USB device found, idVendor=1c6b, idProduct=a223
>usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-4: Product: Mass Storage Device
>usb 3-4: Manufacturer: USB2.0 External
>usb 3-4: SerialNumber: 317509428611220
>usb 3-4: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 3-1.5: new high speed USB device number 5 using xhci_hcd
>usb 3-1.5: New USB device found, idVendor=04b3, idProduct=4010
>usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.5: Product: RNDIS/Ethernet Gadget
>usb 3-1.5: Manufacturer: IBM
>usb 3-1.5: configuration #1 chosen from 2 choices
>usb 3-3.3: new low speed USB device number 6 using xhci_hcd
>usb 3-3.3: New USB device found, idVendor=04b3, idProduct=3019
>usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-3.3: Product: IBM USB Travel Keyboard with UltraNav
>usb 3-3.3: Manufacturer: Lite-On Tech
>usb 3-3.3: configuration #1 chosen from 1 choice
>usb 3-3.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
>usb 3-3.3: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes
>input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/input/input2
>generic-usb 0003:04B3:3019.0001: input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:14.0-3.3/input0
>input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.1/input/input3
>generic-usb 0003:04B3:3019.0002: input,hidraw1: USB HID v1.00 Device [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:14.0-3.3/input1
>SELinux:  9 users, 12 roles, 4211 types, 236 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 306596 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1465548174.906:3): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>usb 3-3.4: new low speed USB device number 7 using xhci_hcd
>usb 3-3.4: New USB device found, idVendor=06cb, idProduct=0009
>usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-3.4: Product: Composite TouchPad / TrackPoint
>usb 3-3.4: Manufacturer: Synaptics Inc.
>usb 3-3.4: configuration #1 chosen from 1 choice
>usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>usb 3-3.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/input/input4
>generic-usb 0003:06CB:0009.0003: input,hidraw2: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:14.0-3.4/input0
>input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/input/input5
>generic-usb 0003:06CB:0009.0004: input,hidraw3: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:14.0-3.4/input1
>usb-storage: device scan complete
>scsi 1:0:0:0: CD-ROM            Slimtype eTAU108   3      AL03 PQ: 0 ANSI: 0
>dracut: Switching root
>udev: starting version 147
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:0:2:0: Attached scsi generic sg2 type 0
>sd 0:0:3:0: Attached scsi generic sg3 type 0
>scsi 1:0:0:0: Attached scsi generic sg4 type 5
>cdc_ether 3-1.5:1.0: usb0: register 'cdc_ether' at usb-0000:00:14.0-1.5, CDC Ethernet Device, 42:f2:e9:c4:15:73
>usbcore: registered new interface driver cdc_ether
>sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda pop-up
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>tg3.c:v3.137 (May 11, 2014)
>tg3 0000:10:00.0: enabling device (0140 -> 0142)
>tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:10:00.0: setting latency timer to 64
>tg3 0000:10:00.0: eth0: Tigon3 [partno(BCM95717C) rev 5720000] (PCI Express) MAC address 40:f2:e9:c4:07:ee
>tg3 0000:10:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>tg3 0000:10:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
>tg3 0000:10:00.1: enabling device (0140 -> 0142)
>  alloc irq_desc for 17 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:10:00.1: setting latency timer to 64
>tg3 0000:10:00.1: eth1: Tigon3 [partno(BCM95717C) rev 5720000] (PCI Express) MAC address 40:f2:e9:c4:07:ef
>tg3 0000:10:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
>tg3 0000:10:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
>tg3 0000:10:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>i801_smbus 0000:00:1f.3: SMBus using polling
>ipmi message handler version 39.2
>IPMI System Interface driver.
>ipmi_si: probing via SMBIOS
>ipmi_si: SMBIOS: io 0xcc0 regsize 1 spacing 1 irq 0
>ipmi_si: Adding SMBIOS-specified kcs state machine
>ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xcc0, slave address 0x20, irq 0
>ipmi_si ipmi_si.0: Found new BMC (man_id: 0x004a66, prod_id: 0x023d, dev_id: 0x20)
>ipmi_si ipmi_si.0: IPMI kcs interface initialized
>power_meter ACPI000D:00: Found ACPI power meter.
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
>iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>ipmi device interface
>microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU20 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU21 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU22 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU23 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU24 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU25 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU26 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU27 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU28 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU29 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU30 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU31 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU32 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU33 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU34 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU35 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU36 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU37 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU38 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU39 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU40 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU41 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU42 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU43 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU44 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU45 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU46 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>microcode: CPU47 sig=0x306f2, pf=0x1, revision=0x2b
>platform microcode: firmware: requesting intel-ucode/06-3f-02
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU1 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU2 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU3 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU4 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU5 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU6 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU7 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU8 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU9 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU10 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU11 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU12 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU13 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU14 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU15 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU16 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU17 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU18 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU19 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU20 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU21 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU22 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU23 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU24 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU25 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU26 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU27 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU28 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU29 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU30 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU31 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU32 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU33 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU34 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU35 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU36 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU37 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU38 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU39 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU40 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU41 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU42 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU43 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU44 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU45 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU46 updated to revision 0x36, date = 2015-08-10 
>microcode: CPU47 updated to revision 0x36, date = 2015-08-10 
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>dmraid[4034]: segfault at 0 ip 0000003f4568ac46 sp 00007ffcb3aab6f8 error 4 in libc-2.12.so[3f45600000+18a000]
>EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: 
>SELinux: initialized (dev sdb2, type ext4), uses xattr
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: 
>SELinux: initialized (dev dm-3, type ext4), uses xattr
>Adding 7811068k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:7811068k SS
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>  alloc irq_desc for 132 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.0: irq 132 for MSI/MSI-X
>  alloc irq_desc for 133 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.0: irq 133 for MSI/MSI-X
>  alloc irq_desc for 134 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.0: irq 134 for MSI/MSI-X
>  alloc irq_desc for 135 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.0: irq 135 for MSI/MSI-X
>  alloc irq_desc for 136 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.0: irq 136 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>type=1305 audit(1465519393.115:4): audit_pid=4501 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
>bnx2fc: QLogic FCoE Driver bnx2fc v2.9.6 (October 15, 2015)
>  alloc irq_desc for 137 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: irq 137 for MSI/MSI-X
>  alloc irq_desc for 138 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: irq 138 for MSI/MSI-X
>  alloc irq_desc for 139 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: irq 139 for MSI/MSI-X
>  alloc irq_desc for 140 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: irq 140 for MSI/MSI-X
>  alloc irq_desc for 141 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>tg3 0000:10:00.1: irq 141 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>device virbr0-nic entered promiscuous mode
>virbr0: starting userspace STP failed, starting kernel STP
>Ebtables v2.0 registered
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>pci 0000:14:00.0: Invalid ROM contents
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>lo: Disabled Privacy Extensions
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>fuse init (API version 7.14)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>device vnet0 entered promiscuous mode
>virbr0: topology change detected, propagating
>virbr0: port 2(vnet0) entering forwarding state
>vnet0: no IPv6 routers present
>kvm: 6847: cpu0 unhandled rdmsr: 0x3a
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 entered promiscuous mode
>virbr0: topology change detected, propagating
>virbr0: port 2(vnet0) entering forwarding state
>vnet0: no IPv6 routers present
>kvm: 24840: cpu0 unhandled rdmsr: 0x3a
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 entered promiscuous mode
>virbr0: topology change detected, propagating
>virbr0: port 2(vnet0) entering forwarding state
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 2(vnet0) entering disabled state
>device vnet0 entered promiscuous mode
>virbr0: topology change detected, propagating
>virbr0: port 2(vnet0) entering forwarding state
>vnet0: no IPv6 routers present
>kvm: 25699: cpu0 ignored rdmsr: 0x3a
>kvm: 25699: cpu1 ignored rdmsr: 0x3a
>kvm: 25699: cpu2 ignored rdmsr: 0x3a
>kvm: 25699: cpu3 ignored rdmsr: 0x3a
>kvm: 25699: cpu4 ignored rdmsr: 0x3a
>kvm: 25699: cpu5 ignored rdmsr: 0x3a
>kvm: 25699: cpu6 ignored rdmsr: 0x3a
>kvm: 25699: cpu7 ignored rdmsr: 0x3a
>kvm: 25699: cpu0 ignored rdmsr: 0x3a
>kvm: 25699: cpu1 ignored rdmsr: 0x3a
>kvm: 25699: cpu2 ignored rdmsr: 0x3a
>kvm: 25699: cpu3 ignored rdmsr: 0x3a
>kvm: 25699: cpu4 ignored rdmsr: 0x3a
>kvm: 25699: cpu5 ignored rdmsr: 0x3a
>kvm: 25699: cpu6 ignored rdmsr: 0x3a
>kvm: 25699: cpu7 ignored rdmsr: 0x3a
>kvm: 25699: cpu0 ignored rdmsr: 0x3a
>kvm: 25699: cpu1 ignored rdmsr: 0x3a
>kvm: 25699: cpu2 ignored rdmsr: 0x3a
>kvm: 25699: cpu3 ignored rdmsr: 0x3a
>kvm: 25699: cpu4 ignored rdmsr: 0x3a
>kvm: 25699: cpu5 ignored rdmsr: 0x3a
>kvm: 25699: cpu6 ignored rdmsr: 0x3a
>kvm: 25699: cpu7 ignored rdmsr: 0x3a

Actions: View

Attachments on bug 1346153: 1167770 | 1167783 | 1167786 | 1168151 | 1171334