Attachment 120939 Details for Bug 172933 – dmesg output

dmesg output

dmesg (text/plain), 22.51 KB, created by Nicolas Mailhot on 2005-11-11 13:34:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nicolas Mailhot

Created: 2005-11-11 13:34:54 UTC

Size: 22.51 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/system)
>Linux version 2.6.14-1.1656_FC5 (bhcompile@dolly.build.redhat.com) (gcc version 4.0.2 20051007 (Red Hat 4.0.2-3)) #1 SMP Tue Nov 8 16:10:09 EST 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f6eb0
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff3040
>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff7d80
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff7d00
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007fff0000
>Using 20 for the hash shift. Max adder is 7fff0000 
>Using node hash shift of 20
>Bootmem setup node 0 0000000000000000-000000007fff0000
>On node 0 totalpages: 524175
>  DMA zone: 3999 pages, LIFO batch:2
>  Normal zone: 520176 pages, LIFO batch:64
>  HighMem zone: 0 pages, LIFO batch:2
>Nvidia board detected. Ignoring ACPI timer override.
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:50000000)
>Checking aperture...
>CPU 0: aperture @ 140000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup00/system
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2210.193 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Memory: 2038384k/2097088k available (2461k kernel code, 58316k reserved, 1654k data, 232k init)
>Calibrating delay using timer specific routine.. 4425.13 BogoMIPS (lpj=8850271)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(1) -> Node 0 -> Core 0
>mtrr: v2.0 (20020519)
>Using local APIC timer interrupts.
>Detected 12.557 MHz APIC timer.
>Brought up 1 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>checking if image is initramfs...softlockup thread 0 started up.
> it is
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at d0000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>Boot video device is 0000:05:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-DMA: Disabling IOMMU.
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: 7000-8fff
>  MEM window: f4000000-f5ffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 9000-9fff
>  MEM window: f0000000-f1ffffff
>  PREFETCH window: 88100000-881fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 5000-5fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: 6000-6fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: a000-afff
>  MEM window: f2000000-f3ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1131716085.572:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key E56149A9FB26E67B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ACPI: CPU0 (power states: C1[C1])
>ACPI: CPU255 (power states: C1[C1])
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.101 (c) Dave Jones
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 242
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: Maxtor 6Y080L0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: Maxtor 6Y080L0, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>hdc: max request size: 128KiB
>hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
>hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc3
>ide-floppy driver 0.99.newide
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
>powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>cpu_init done, current fid 0xe, vid 0x6
>ACPI wakeup devices: 
>HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 861k
>SCSI subsystem initialized
>libata version 1.12 loaded.
>sata_nv 0000:00:07.0: version 0.8
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC000 irq 217
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC008 irq 217
>ata1: no device found (phy stat 00000000)
>scsi0 : sata_nv
>input: AT Translated Set 2 keyboard as /class/input/input0
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_nv
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xD400 irq 225
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xD408 irq 225
>ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f
>ata3: dev 0 ATAPI, max UDMA/66
>ata3(0): applying bridge limits
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>ata3: dev 0 configured for UDMA/66
>scsi2 : sata_nv
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_nv
>md: raid1 personality registered as nr 3
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering hdc3 ...
>md:  adding hdc3 ...
>md: hdc1 has different UUID to hdc3
>md:  adding hda3 ...
>md: hda1 has different UUID to hdc3
>md: created md1
>md: bind<hda3>
>md: bind<hdc3>
>md: running: <hdc3><hda3>
>md: kicking non-fresh hdc3 from array!
>md: unbind<hdc3>
>md: export_rdev(hdc3)
>raid1: raid set md1 active with 1 out of 2 mirrors
>md: considering hdc1 ...
>md:  adding hdc1 ...
>md:  adding hda1 ...
>md: created md0
>md: bind<hda1>
>md: bind<hdc1>
>md: running: <hdc1><hda1>
>md: kicking non-fresh hdc1 from array!
>md: unbind<hdc1>
>md: export_rdev(hdc1)
>raid1: raid set md0 active with 1 out of 2 mirrors
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1034 types, 109 bools, 1 sens, 256 cats
>security:  55 classes, 16147 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.44.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
>sata_sil 0000:01:09.0: version 0.9
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50
>ata5: SATA max UDMA/100 cmd 0xFFFFC2000001E080 ctl 0xFFFFC2000001E08A bmdma 0xFFFFC2000001E000 irq 50
>ata6: SATA max UDMA/100 cmd 0xFFFFC2000001E0C0 ctl 0xFFFFC2000001E0CA bmdma 0xFFFFC2000001E008 irq 50
>ata7: SATA max UDMA/100 cmd 0xFFFFC2000001E280 ctl 0xFFFFC2000001E28A bmdma 0xFFFFC2000001E200 irq 50
>ata8: SATA max UDMA/100 cmd 0xFFFFC2000001E2C0 ctl 0xFFFFC2000001E2CA bmdma 0xFFFFC2000001E208 irq 50
>ata5: no device found (phy stat 00000000)
>scsi4 : sata_sil
>ata6: no device found (phy stat 00000000)
>scsi5 : sata_sil
>ata7: no device found (phy stat 00000000)
>scsi6 : sata_sil
>ata8: no device found (phy stat 00000000)
>scsi7 : sata_sil
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: irq 58, io mem 0xfeb00000
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb 1-9: new high speed USB device using ehci_hcd and address 2
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 217, io mem 0xf6000000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>hub 1-9:1.0: USB hub found
>hub 1-9:1.0: 4 ports detected
>CSLIP: code copyright 1989 Regents of the University of California
>ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
>HiSax: Linux Driver for passive ISDN cards
>HiSax: Version 3.5 (module)
>HiSax: Layer1 Revision 2.46.2.5
>HiSax: Layer2 Revision 2.30.2.4
>HiSax: TeiMgr Revision 2.20.2.3
>HiSax: Layer3 Revision 2.22.2.3
>HiSax: LinkLayer Revision 2.59.2.4
>HFC-S USB: driver module revision 4.36 date 2005/04/08 loaded, (debug=-1)
>usb 1-9.4: new low speed USB device using ehci_hcd and address 3
>input: Microsoft Microsoft Trackball Explorer® as /class/input/input1
>input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb-0000:00:02.1-9.4
>usbcore: registered new driver hfc_usb
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering hdc1 ...
>md:  adding hdc1 ...
>md: hdc3 has different UUID to hdc1
>md: md0 already running, cannot run hdc1
>md: export_rdev(hdc1)
>md: considering hdc3 ...
>md:  adding hdc3 ...
>md: md1 already running, cannot run hdc3
>md: export_rdev(hdc3)
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>audit(1131712503.397:2): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1131712503.397:3): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1131712503.397:4): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k
>audit(1131712503.401:5): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1131712503.405:6): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1131712503.405:7): avc:  denied  { write } for  pid=1123 comm="swapon" name="blkid.tab" dev=dm-0 ino=2000048 scontext=system_u:system_r:fsadm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2002 Netfilter core team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack
>it87: Found IT8712F chip at 0x290, revision 5
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80486d00(lo)
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present
>hald-probe-smbi[1959] trap stack segment rip:401147 rsp:7fffffe1cc60 error:0
>gdm-binary[2216]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23940 error 4
>gdm-binary[2272]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23820 error 4
>gdm-binary[2328]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23820 error 4
>gdm-binary[2384]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23820 error 4
>gdm-binary[2440]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23820 error 4
>gdm-binary[2496]: segfault at 0000000000000000 rip 00002aaaae82deab rsp 00007fffffb23820 error 4
>md: bind<hdc3>
>RAID1 conf printout:
> --- wd:1 rd:2
> disk 0, wo:0, o:1, dev:hda3
> disk 1, wo:1, o:1, dev:hdc3
>md: syncing RAID array md1
>md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
>md: using 128k window, over a total of 76886976 blocks.
>md: bind<hdc1>
>RAID1 conf printout:
> --- wd:1 rd:2
> disk 0, wo:0, o:1, dev:hda1
> disk 1, wo:1, o:1, dev:hdc1
>md: delaying resync of md0 until md1 has finished resync (they share one or more physical units)

Actions: View

Attachments on bug 172933: 120939