Attachment 125327 Details for Bug 182589 – two runs through system

two runs through system

2cycle-ser-capture.TXT (text/plain), 15.64 KB, created by Jim Cornette on 2006-02-27 16:43:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jim Cornette

Created: 2006-02-27 16:43:46 UTC

Size: 15.64 KB

patch

obsolete

>Restarting system.
>
Linux version 2.6.15-1.1955_FC5 (bhcompile@ls20-bc1-14.build.redhat.com) (gcc version 4.1.0 20060214 (Red Hat 4.1.0-0.27)) #1 Wed Feb 15 15:46:10 EST 2006
>
BIOS-provided physical RAM map:
>
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>
 BIOS-e820: 0000000000100000 - 000000000fe00000 (usable)
>
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>
0MB HIGHMEM available.
>
254MB LOWMEM available.
>
Using x86 segment limits to approximate NX protection
>
DMI 2.2 present.
>
ACPI: Unable to locate RSDP
>
Allocating PCI resources starting at 10000000 (gap: 0fe00000:f01f0000)
>
Built 1 zonelists
>
Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz console=tty0 console=ttyS0,9600n8
>
Enabling fast FPU save and restore... done.
>
Enabling unmasked SIMD FPU exception support... done.
>
Initializing CPU#0
>
CPU 0 irqstacks, hard=c03c5000 soft=c03c4000
>
PID hash table entries: 1024 (order: 10, 16384 bytes)
>
Detected 1197.169 MHz processor.
>
Using tsc for high-res timesource
>
Console: colour VGA+ 80x25
>
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>
Memory: 249192k/260096k available (1886k kernel code, 10420k reserved, 750k data, 168k init, 0k highmem)
>
Checking if this processor honours the WP bit even in supervisor mode... Ok.
>
Calibrating delay using timer specific routine.. 2397.65 BogoMIPS (lpj=4795303)
>
Security Framework v1.0.0 initialized
>
SELinux:  Initializing.
>
SELinux:  Starting in permissive mode
>
selinux_register_security:  Registering secondary module capability
>
Capability LSM initialized as secondary
>
Mount-cache hash table entries: 512
>
CPU: L1 I cache: 16K, L1 D cache: 16K
>
CPU: L2 cache: 256K
>
Intel machine check architecture supported.
>
Intel machine check reporting enabled on CPU#0.
>
CPU: Intel(R) Celeron(TM) CPU                1200MHz stepping 04
>
Checking 'hlt' instruction... OK.
>
checking if image is initramfs... it is
>
Freeing initrd memory: 4932k freed
>
NET: Registered protocol family 16
>
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
>
PCI: Using configuration type 1
>
ACPI: Subsystem revision 20060127
>
ACPI: Interpreter disabled.
>
Linux Plug and Play Support v0.97 (c) Adam Belay
>
pnp: PnP ACPI: disabled
>
usbcore: registered new driver usbfs
>
usbcore: registered new driver hub
>
PCI: Probing PCI hardware
>
PCI: Ignoring BAR0-3 of IDE controller 0000:00:00.1
>
Uncovering SIS18 that hid as a SIS503 (compatible=0)
>
Enabling SiS 96x SMBus.
>
PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
>
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>
PCI: Bridge: 0000:00:02.0
>
  IO window: d000-dfff
>
  MEM window: ec000000-ec0fffff
>
  PREFETCH window: e0000000-e7ffffff
>
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>
audit: initializing netlink socket (disabled)
>
audit(1141040311.068:1): initialized
>
Total HugeTLB memory allocated, 0
>
VFS: Disk quotas dquot_6.5.1
>
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>
SELinux:  Registering netfilter hooks
>
Initializing Cryptographic API
>
ksign: Installing public key data
>
Loading keyring
>
- Added public key CA7484018F37AD51
>
- User ID: Red Hat, Inc. (Kernel Module GPG key)
>
io scheduler noop registered
>
io scheduler anticipatory registered
>
io scheduler deadline registered
>
io scheduler cfq registered (default)
>
isapnp: Scanning for PnP cards...
>
isapnp: No Plug & Play device found
>
Real Time Clock Driver v1.12ac
>
Linux agpgart interface v0.101 (c) Dave Jones
>
PNP: No PS/2 controller found. Probing ports directly.
>
serio: i8042 KBD port at 0x60,0x64 irq 1
>
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>
SIS5513: IDE controller at PCI slot 0000:00:00.1
>
PCI: Assigned IRQ 14 for device 0000:00:00.1
>
SIS5513: chipset revision 208
>
SIS5513: not 100% native mode: will probe irqs later
>
SIS5513: SiS630 ATA 100 (1st gen) controller
>
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
>
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
>
hda: FUJITSU MHT2020AT, ATA DISK drive
>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>
hda: max request size: 128KiB
>
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33)
>
hda: cache flushes supported
>
 hda: hda1 hda2 hda3
>
ide-floppy driver 0.99.newide
>
usbcore: registered new driver libusual
>
usbcore: registered new driver hiddev
>
usbcore: registered new driver usbhid
>
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>
mice: PS/2 mouse device common for all mice
>
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
md: bitmap version 4.39
>
NET: Registered protocol family 2
>
input: AT Translated Set 2 keyboard as /class/input/input0
>
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
>
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>
TCP: Hash tables configured (established 8192 bind 8192)
>
TCP reno registered
>
TCP bic registered
>
Initializing IPsec netlink socket
>
NET: Registered protocol family 1
>
NET: Registered protocol family 17
>
Using IPI Shortcut mode
>
Freeing unused kernel memory: 168k freed
>
Write protecting the kernel read-only data: 344k
>
[9;0][8]Greetings.
>anaconda installer init version 10.92.5 starting
>mounting /proc filesystem... done
>creating /dev filesystem... done
>mounting /dev/pts (unix98 pty) filesystem... done
>mounting /sys filesystem... done
>anaconda installer init version 10.92.5 using a serial console
>remember, cereal is an important part of a nutritionally balanced breakfast.
>
>could not set new controlling tty
>trying to remount root filesystem read write... done
>mounting /tmp as ramfs... done
>running install...
>running /sbin/loader
>%G[1;24r(B)0[1;24r[H[J[1;1H                                                                                [2;1H                                                                                [3;1H                                                                                [4;1H                                                                                [5;1H                                                                                [6;1H                                                                                [7;1H                                                                                [8;1H                                                                                [9;1H                                                                                [10;1H                                                                                [11;1H                                                                                [12;1H                                                                                [13;1H                                                                                [14;1H                                                                                [15;1H                                                                                [16;1H                                                                                [17;1H                                                                                [18;1H                                                                                [19;1H                                                                                [20;1H                                                                                [21;1H                                                                                [22;1H                                                                                [23;1H                                                                                [24;1H                                                                               [1;1HWelcome to Fedora Core[10;20Hââââââââââ¤ Loading SCSI driver âââââââââââ[11;20Hâ                                        â [12;20Hâ Loading usb-storage driver...          â [13;20Hâ                                        â [14;20Hââââââââââââââââââââââââââââââââââââââââââ [15;21H                                          [24;3H<Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen[12;51H[10;20H                                          [11;20H                                           [12;20H                                           [13;20H                                           [14;20H                                           [15;21H                                          [15;20H[6;20Hââââââââââââââââ¤ CD Found ââââââââââââââââ[7;20Hâ                                        â [8;20Hâ To begin testing the CD media before   â [9;20Hâ installation press OK.                 â [10;20Hâ                                        â [11;20Hâ Choose Skip to skip the media test     â [12;20Hâ and start the installation.            â [13;20Hâ                                        â [14;20Hâ      ââââââ             ââââââââ       â [15;20Hâ      â OK â             â Skip â       â [16;20Hâ      ââââââ             ââââââââ       â [17;20Hâ                                        â [18;20Hâ                                        â [19;20Hââââââââââââââââââââââââââââââââââââââââââ [20;21H                                          [15;32H[C

[0m[100E
>sending termination signals...done
>sending kill signals...done
>disabling swap...
>unmounting filesystems...
>	/mnt/runtime done
>	disabling /dev/loop0
>	/proc/bus/usb done
>	/proc done
>	/dev/pts done
>	/sys done
>	/tmp/ramfs done
>	/mnt/source done
>rebooting system
>Restarting system.
>
Linux version 2.6.15-1.1955_FC5 (bhcompile@ls20-bc1-14.build.redhat.com) (gcc version 4.1.0 20060214 (Red Hat 4.1.0-0.27)) #1 Wed Feb 15 15:46:10 EST 2006
>
BIOS-provided physical RAM map:
>
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>
 BIOS-e820: 0000000000100000 - 000000000fe00000 (usable)
>
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>
0MB HIGHMEM available.
>
254MB LOWMEM available.
>
Using x86 segment limits to approximate NX protection
>
DMI 2.2 present.
>
ACPI: Unable to locate RSDP
>
Allocating PCI resources starting at 10000000 (gap: 0fe00000:f01f0000)
>
Built 1 zonelists
>
Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz console=ttyS0 console=tty0
>
Enabling fast FPU save and restore... done.
>
Enabling unmasked SIMD FPU exception support... done.
>
Initializing CPU#0
>
CPU 0 irqstacks, hard=c03c5000 soft=c03c4000
>
PID hash table entries: 1024 (order: 10, 16384 bytes)
>
Detected 1197.306 MHz processor.
>
Using tsc for high-res timesource
>
Console: colour VGA+ 80x25
>
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>
Memory: 249192k/260096k available (1886k kernel code, 10420k reserved, 750k data, 168k init, 0k highmem)
>
Checking if this processor honours the WP bit even in supervisor mode... Ok.
>
Calibrating delay using timer specific routine.. 2397.63 BogoMIPS (lpj=4795263)
>
Security Framework v1.0.0 initialized
>
SELinux:  Initializing.
>
SELinux:  Starting in permissive mode
>
selinux_register_security:  Registering secondary module capability
>
Capability LSM initialized as secondary
>
Mount-cache hash table entries: 512
>
CPU: L1 I cache: 16K, L1 D cache: 16K
>
CPU: L2 cache: 256K
>
Intel machine check architecture supported.
>
Intel machine check reporting enabled on CPU#0.
>
CPU: Intel(R) Celeron(TM) CPU                1200MHz stepping 04
>
Checking 'hlt' instruction... OK.
>
checking if image is initramfs... it is
>
Freeing initrd memory: 4932k freed
>
NET: Registered protocol family 16
>
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
>
PCI: Using configuration type 1
>
ACPI: Subsystem revision 20060127
>
ACPI: Interpreter disabled.
>
Linux Plug and Play Support v0.97 (c) Adam Belay
>
pnp: PnP ACPI: disabled
>
usbcore: registered new driver usbfs
>
usbcore: registered new driver hub
>
PCI: Probing PCI hardware
>
PCI: Ignoring BAR0-3 of IDE controller 0000:00:00.1
>
Uncovering SIS18 that hid as a SIS503 (compatible=0)
>
Enabling SiS 96x SMBus.
>
PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
>
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>
PCI: Bridge: 0000:00:02.0
>
  IO window: d000-dfff
>
  MEM window: ec000000-ec0fffff
>
  PREFETCH window: e0000000-e7ffffff
>
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>
audit: initializing netlink socket (disabled)
>
audit(1141040497.072:1): initialized
>
Total HugeTLB memory allocated, 0
>
VFS: Disk quotas dquot_6.5.1
>
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>
SELinux:  Registering netfilter hooks
>
Initializing Cryptographic API
>
ksign: Installing public key data
>
Loading keyring
>
- Added public key CA7484018F37AD51
>
- User ID: Red Hat, Inc. (Kernel Module GPG key)
>
io scheduler noop registered
>
io scheduler anticipatory registered
>
io scheduler deadline registered
>
io scheduler cfq registered (default)
>
isapnp: Scanning for PnP cards...
>
isapnp: No Plug & Play device found
>
Real Time Clock Driver v1.12ac
>
Linux agpgart interface v0.101 (c) Dave Jones
>
PNP: No PS/2 controller found. Probing ports directly.
>
serio: i8042 KBD port at 0x60,0x64 irq 1
>
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>
SIS5513: IDE controller at PCI slot 0000:00:00.1
>
PCI: Assigned IRQ 14 for device 0000:00:00.1
>
SIS5513: chipset revision 208
>
SIS5513: not 100% native mode: will probe irqs later
>
SIS5513: SiS630 ATA 100 (1st gen) controller
>
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
>
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
>
hda: FUJITSU MHT2020AT, ATA DISK drive
>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>
hda: max request size: 128KiB
>
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33)
>
hda: cache flushes supported
>
 hda: hda1 hda2 hda3
>
ide-floppy driver 0.99.newide
>
usbcore: registered new driver libusual
>
usbcore: registered new driver hiddev
>
usbcore: registered new driver usbhid
>
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>
mice: PS/2 mouse device common for all mice
>
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
md: bitmap version 4.39
>
NET: Registered protocol family 2
>
input: AT Translated Set 2 keyboard as /class/input/input0
>
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
>
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>
TCP: Hash tables configured (established 8192 bind 8192)
>
TCP reno registered
>
TCP bic registered
>
Initializing IPsec netlink socket
>
NET: Registered protocol family 1
>
NET: Registered protocol family 17
>
Using IPI Shortcut mode
>
Freeing unused kernel memory: 168k freed
>
Write protecting the kernel read-only data: 344k
>

Actions: View

Attachments on bug 182589: 125319 | 125323 | 125327 | 125338 | 125341