Attachment 1427151 Details for Bug 1567984 – cups-browsed.conf from workstation

cups-browsed.conf from workstation

cups-browsed.conf (text/plain), 25.59 KB, created by Attila on 2018-04-26 11:26:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Attila

Created: 2018-04-26 11:26:29 UTC

Size: 25.59 KB

patch

obsolete

># All configuration options described here can also be supplied on the
># command line of cups-browsed via the "-o" option. In case of
># contradicting settings the setting defined in the configuration file
># will get used.
>
># Unknown directives are ignored, also unknown values.
>
>
># Where should cups-browsed save information about the print queues it had
># generated when shutting down, like whether one of these queues was the
># default printer, or default option settings of the queues?
>
># CacheDir /var/cache/cups
>
>
># Where should cups-browsed create its debug log file (if "DebugLogging file"
># is set)?
>
># LogDir /var/log/cups
>
>
># How should debug logging be done? Into the file
># /var/log/cups/cups-browsed_log ('file'), to stderr ('stderr'), or
># not at all ('none')?
>
># DebugLogging file
># DebugLogging stderr
># DebugLogging file stderr
># DebugLogging none
>
>
># Which protocols will we use to discover printers on the network?
># Can use DNSSD and/or CUPS and/or LDAP, or 'none' for neither.
>
>BrowseRemoteProtocols dnssd cups
>
>
># Which protocols will we use to broadcast shared local printers to the network?
># Can use DNSSD and/or CUPS, or 'none' for neither.
># Only CUPS is actually supported, as DNSSD is done by CUPS itself (we ignore
># DNSSD in this directive).
>
># BrowseLocalProtocols none
>
>
># Settings of this directive apply to both BrowseRemoteProtocols and
># BrowseLocalProtocols.
># Can use DNSSD and/or CUPS and/or LDAP, or 'none' for neither.
>
># BrowseProtocols none
>
>
># Only browse remote printers (via DNS-SD or CUPS browsing) from
># selected servers using the "BrowseAllow", "BrowseDeny", and
># "BrowseOrder" directives
>
># This serves for restricting the choice of printers in print dialogs
># to trusted servers or to reduce the number of listed printers in the
># print dialogs to a more user-friendly amount in large networks with
># very many shared printers.
>
># This only filters the selection of remote printers for which
># cups-browsed creates local queues. If the print dialog uses other
># mechanisms to list remote printers as for example direct DNS-SD
># access, cups-browsed has no influence. cups-browsed also does not
># prevent the user from manually accessing non-listed printers.
>
># "BrowseAllow": Accept printers from these hosts or networks. If
># there are only "BrowseAllow" lines and no "BrowseOrder" and/or
># "BrowseDeny" lines, only servers matching at last one "BrowseAllow"
># line are accepted.
>
># "BrowseDeny": Deny printers from these hosts or networks. If there
># are only "BrowseDeny" lines and no "BrowseOrder" and/or
># "BrowseAllow" lines, all servers NOT matching any of the
># "BrowseDeny" lines are accepted.
>
># "BrowseOrder": Determine the order in which "BrowseAllow" and
># "BrowseDeny" lines are applied. With "BrowseOrder Deny,Allow" in the
># beginning all servers are accepted, then the "BrowseDeny" lines are
># applied to exclude unwished servers or networks and after that the
># "BrowseAllow" lines to re-include servers or networks. With
># "BrowseOrder Allow,Deny" we start with denying all servers, then
># applying the "BrowseAllow" lines and afterwards the "BrowseDeny"
># lines.
>
># Default for "BrowseOrder" is "Deny.Allow" if there are both
># "BrowseAllow" and "BrowseDeny" lines.
>
># If there are no "Browse..." lines at all, all servers are accepted.
>
># BrowseAllow All
># BrowseAllow cups.example.com
># BrowseAllow 192.168.1.12
># BrowseAllow 192.168.1.0/24
># BrowseAllow 192.168.1.0/255.255.255.0
>
># BrowseDeny All
># BrowseDeny printserver.example.com
># BrowseDeny 192.168.1.13
># BrowseDeny 192.168.3.0/24
># BrowseDeny 192.168.3.0/255.255.255.0
>
># BrowseOrder Deny,Allow
># BrowseOrder Allow,Deny
>
>
># The interval between browsing/broadcasting cycles, local and/or
># remote, can be adjusted with the BrowseInterval directive.
>
># BrowseInterval 60
>
>
># Browsing-related operations such as adding or removing printer queues
># and broadcasting are each allowed to take up to a given amount of time.
># It can be configured, in seconds, with the BrowseTimeout directive.
># Especially queues discovered by CUPS broadcasts will be removed after
># this timeout if no further broadcast from the server happens.
>
># BrowseTimeout 300
>
>
># Filtering of remote printers by other properties than IP addresses
># of their servers
>
># Often the desired selection of printers cannot be reached by only
># taking into account the IP addresses of the servers. For these cases
># there is the BrowseFilter directive to filter by most of the known
># properties of the printer.
>
># By default there is no BrowseFilter line meaning that no filtering
># is applied.
>
># To do filtering one can supply one or more BrowseFilter directives
># like this:
>
># BrowseFilter [NOT] [EXACT] <FIELD> [<VALUE>]
>
># The BrowseFilter directive always starts with the word
># "BrowseFilter" and it must at least contain the name of the data
># field (<FIELD>) of the printer's properties to which it should
># apply.
>
># Available field names are:
>
>#   name:    Name of the local print queue to be created
>#   host:    Host name of the remote print server
>#   port:    Port through which the printer is accessed on the server
>#   service: DNS/SD service name of the remote printer
>#   domain:  Domain of the remote print server
>
># Also all field names in the TXT records of DNS-SD-advertised printers
># are valid, like "color", "duplex", "pdl", ... If the field name of
># the filter rule does not exist for the printer, the rule is skipped.
>
># The optional <VALUE> field is either the exact value (when the
># option EXACT is supplied) or a regular expression (Run "man 7 regex"
># in a terminal window) to be matched with the data field.
>
># If no <VALUE> filed is supplied, rules with field names of the TXT
># record are considered for boolean matching (true/false) of boolean
># field (like duplex, which can have the values "T" for true and "F"
># for false).
>
># If the option NOT is supplied, the filter rule is fulfilled if the
># regular expression or the exact value DOES NOT match the content of
># the data field. In a boolean rule (without <VALUE>) the rule matches
># false.
>
># Regular expressions are always considered case-insensitive and
># extended POSIX regular expressions. Field names and options (NOT,
># EXACT) are all evaluated case-insensitive. If there is an error in a
># regular expression, the BrowseFilter line gets ignored.
>
># Especially to note is that supplying any simple string consisting of
># only letters, numbers, spaces, and some basic special characters as
># a regular expression matches if it is contained somewhere in the
># data field.
>
># If there is more than one BrowseFilter directive, ALL the directives
># need to be fulfilled for the remote printer to be accepted. If one
># is not fulfilled, the printer will get ignored.
>
># Examples:
>
># Rules for standard data items which are supplied with any remote
># printer advertised via DNS-SD:
>
># Print queue name must contain "hum_res_", this matches
># "hum_res_mono" or "hum_res_color" but also "old_hum_res_mono":
>
># BrowseFilter name hum_res_
>
># This matches if the remote host name contains "printserver", like
># "printserver.local", "printserver2.example.com", "newprintserver":
>
># BrowseFilter host printserver
>
># This matches all ports with 631 int its number, for example 631,
># 8631, 10631,...:
>
># BrowseFilter port 631
>
># This rule matches if the DNS-SD service name contains "@ printserver":
>
># Browsefilter service @ printserver
>
># Matches all domains with "local" in their names, not only "local" but
># also things like "printlocally.com":
>
># BrowseFilter domain local
>
># Examples for rules applying to items of the TXT record:
>
># This rule selects PostScript printers, as the "PDL" field in the TXT
># record contains "postscript" then. This includes also remote CUPS
># queues which accept PostScript, independent of whether the physical
># printer behind the CUPS queue accepts PostScript or not.
>
># BrowseFilter pdl postscript
>
># Color printers usually contain a "Color" entry set to "T" (for true)
># in the TXT record. This rule selects them:
>
># BrowseFilter color
>
># This is a similar rule to select only duplex (automatic double-sided
># printing) printers:
>
># BrowseFilter duplex
>
># Rules with the NOT option:
>
># This rule EXCLUDES printers from all hosts containing "financial" in
># their names, nice to get rid of the 100s of printers of the
># financial department:
>
># BrowseFilter NOT host financial
>
># Get only monochrome printers ("Color" set to "F", meaning false, in
># the TXT record):
>
># BrowseFilter NOT color
>
># Rules with more advanced use of regular expressions:
>
># Only queue names which BEGIN WITH "hum_res_" are accepted now, so we
># still get "hum_res_mono" or "hum_res_color" but not
># "old_hum_res_mono" any more:
>
># BrowseFilter name ^hum_res_
>
># Server names is accepted if it contains "print_server" OR
># "graphics_dep_server":
>
># BrowseFilter host print_server|graphics_dep_server
>
># "printserver1", "printserver2", and "printserver3", nothing else:
>
># BrowseFilter host ^printserver[1-3]$
>
># Printers understanding at least one of PostScript, PCL, or PDF:
>
># BrowseFilter pdl postscript|pcl|pdf
>
># Examples for the EXACT option:
>
># Only printers from "printserver.local" are accepted:
>
># BrowseFilter EXACT host printserver.local
>
># Printers from all servers except "prinserver2.local" are accepted:
>
># BrowseFilter NOT EXACT host prinserver2.local
>
>
># Use BrowsePoll to poll a particular CUPS server
>
># BrowsePoll cups.example.com
># BrowsePoll cups.example.com:631
># BrowsePoll cups.example.com:631/version=1.1
>BrowsePoll fileserver
>BrowsePoll ikaros
>LocalQueueNamingRemoteCUPS RemoteName
>
># LDAP browsing configuration
># The default value for all options is an empty string. Example configuration:
>
># BrowseLDAPBindDN cn=cups-browsed,dc=domain,dc=tld
># BrowseLDAPCACertFile /path/to/server/certificate.pem
># BrowseLDAPDN ou=printers,dc=domain,dc=tld
># BrowseLDAPFilter (printerLocation=/Office 1/*)
># BrowseLDAPPassword s3cret
># BrowseLDAPServer ldaps://ldap.domain.tld
>
>
># Use DomainSocket to access the local CUPS daemon via another than the
># default domain socket. "None" or "Off" lets cups-browsed not use CUPS'
># domain socket.
>
># DomainSocket /var/run/cups/cups.sock
># DomainSocket None
># DomainSocket Off
>
>
># Set HTTP timeout (in seconds) for requests sent to local/remote
># resources Note that too short timeouts can make services getting
># missed when they are present and operations be unneccesarily
># repeated and too long timeouts can make operations take too long
># when the server does not respond.
>
># HttpLocalTimeout 5
># HttpRemoteTimeout 10
>
>
># Set OnlyUnsupportedByCUPS to "Yes" will make cups-browsed not create
># local queues for remote printers for which CUPS creates queues by
># itself.  These printers are printers advertised via DNS-SD and doing
># CUPS-supported (currently PWG Raster and Apple Raster) driverless
># printing, including remote CUPS queues. Queues for other printers
># (like for legacy PostScript/PCL printers) are always created
># (depending on the other configuration settings of cups-browsed).
>
># With OnlyUnsupportedByCUPS set to "No", cups-browsed creates queues
># for all printers which it supports, including printers for which
># CUPS would create queues by itself. Temporary queues created by CUPS
># will get overwritten. This way it is assured that any extra
># functionality of cups-browsed will apply to these queues. As queues
># created by cups-browsed are permanent CUPS queues this setting is
># also recommended if applications/print dialogs which do not support
># temporary CUPS queues are installed. This setting is the default.
>
># OnlyUnsupportedByCUPS Yes
>
>
># With the directives LocalQueueNamingRemoteCUPS and
># LocalQueueNamingIPPPrinter you can determine how the names for local
># queues generated by cups-browsed are generated, separately for
># remote CUPS printers and IPP printers.
>
># DNS-SD (the default in both cases) bases the naming on the service
># name of the printer's advertised DNS-SD record. This is exactly the
># same naming scheme as CUPS uses for its temporary queues, so the
># local queue from cups-browsed prevents CUPS from listing and
># creating an additional queue. As DNS-SD service names have to be
># unique, queue names of printers from different servers will also be
># unique and so there is no automatic clustering for load-balanced
># printing.
>
># MakeModel bases the queue name on the printer's manufacturer and
># model names. This scheme cups-browsed used formerly for IPP
># printers.
>
># RemoteName is only available for remote CUPS queues and uses the
># name of the queue on the remote CUPS server as the local queue's
># name. This makes printers on different CUPS servers with equal queue
># names automatically forming a load-balancing cluster as CUPS did
># formerly (CUPS 1.5.x and older) with CUPS-broadcasted remote
># printers. This scheme cups-browsed used formerly for remote CUPS
># printers.
>
># LocalQueueNamingRemoteCUPS DNS-SD
># LocalQueueNamingRemoteCUPS MakeModel
># LocalQueueNamingRemoteCUPS RemoteName
># LocalQueueNamingIPPPrinter DNS-SD
># LocalQueueNamingIPPPrinter MakeModel
>
>
># Set IPBasedDeviceURIs to "Yes" if cups-browsed should create its
># local queues with device URIs with the IP addresses instead of the
># host names of the remote servers. This mode is there for any
># problems with host name resolution in the network, especially also
># if avahi-daemon is only run for printer discovery and already
># stopped while still printing. By default this mode is turned off,
># meaning that we use URIs with host names.
>
># If you prefer IPv4 or IPv6 IP addresses in the URIs, you can set
># IPBasedDeviceURIs to "IPv4" to only get IPv4 IP addresses or
># IPBasedDeviceURIs to "IPv6" to only get IPv6 IP addresses.
>
># IPBasedDeviceURIs No
># IPBasedDeviceURIs Yes
># IPBasedDeviceURIs IPv4
># IPBasedDeviceURIs IPv6
>
>
># Set CreateRemoteRawPrinterQueues to "Yes" to let cups-browsed also
># create local queues pointing to remote raw CUPS queues. Normally,
># only queues pointing to remote queues with PPD/driver are created
># as we do not use drivers on the client side, but in some cases
># accessing a remote raw queue can make sense, for example if the
># queue forwards the jobs by a special backend like Tea4CUPS.
>
># CreateRemoteRawPrinterQueues Yes
>
>
># cups-browsed by default creates local print queues for each shared
># CUPS print queue which it discovers on remote machines in the local
># network(s). Set CreateRemoteCUPSPrinterQueues to "No" if you do not
># want cups-browsed to do this. For example you can set cups-browsed
># to only create queues for IPP network printers setting
># CreateIPPPrinterQueues not to "No" and CreateRemoteCUPSPrinterQueues
># to "No".
>
># CreateRemoteCUPSPrinterQueues No
>
>
># Set CreateIPPPrinterQueues to "All" to let cups-browsed discover IPP
># network printers (native printers, not CUPS queues) with known page
># description languages (PWG Raster, PDF, PostScript, PCL XL, PCL
># 5c/e) in the local network and auto-create print queues for them.
>
># Set CreateIPPPrinterQueues to "Everywhere" to let cups-browsed
># discover IPP Everywhere printers in the local network (native
># printers, not CUPS queues) and auto-create print queues for them.
>
># Set CreateIPPPrinterQueues to "AppleRaster" to let cups-browsed
># discover Apple Raster printers in the local network (native
># printers, not CUPS queues) and auto-create print queues for them.
>
># Set CreateIPPPrinterQueues to "Driverless" to let cups-browsed
># discover printers designed for driverless use (currently IPP
># Everywhere and Apple Raster) in the local network (native printers,
># not CUPS queues) and auto-create print queues for them.
>
># Set CreateIPPPrinterQueues to "LocalOnly" to auto-create print
># queues only for local printers made available as IPP printers. These
># are for example IPP-over-USB printers, made available via
># ippusbxd. This is the default.
>
># Set CreateIPPPrinterQueues to "No" to not auto-create print queues
># for IPP network printers.
>
># If queues with PPD file are created (see IPPPrinterQueueType
># directive below) the PPDs are auto-generated by cups-browsed based
># on properties of the printer polled via IPP. In case of missing
># information, info from the Bonjour record is used asd as last mean
># default values.
>
># If queues without PPD (see IPPPrinterQueueType directive below) are
># created clients have to IPP-poll the capabilities of the printer and
># send option settings as standard IPP attributes. Then we do not poll
># the capabilities by ourselves to not wake up the printer from
># power-saving mode when creating the queues. Jobs have to be sent in
># one of PDF, PWG Raster, or JPEG format. Other formats are not
># accepted.
>
># This functionality is primarily for mobile devices running
># CUPS to not need a printer setup tool nor a collection of printer
># drivers and PPDs.
>
># CreateIPPPrinterQueues No
># CreateIPPPrinterQueues LocalOnly
># CreateIPPPrinterQueues Everywhere
># CreateIPPPrinterQueues AppleRaster
># CreateIPPPrinterQueues Everywhere AppleRaster
># CreateIPPPrinterQueues Driverless
># CreateIPPPrinterQueues All
>
>
># If cups-browsed is automatically creating print queues for native
># IPP network printers ("CreateIPPPrinterQueues Yes"), the type of
># queue to be created can be selected by the "IPPPrinterQueueType"
># directive. The "PPD" (default) setting makes queues with PPD file
># being created. With "Interface" or "NoPPD" the queue is created with
># a System V interface script (Not supported with CUPS 2.2.x or
># later). "Auto" is for backward compatibility and also lets queues
># with PPD get created.
>
># IPPPrinterQueueType PPD
># IPPPrinterQueueType NoPPD
># IPPPrinterQueueType Interface
># IPPPrinterQueueType Auto
>
>
># The NewIPPPrinterQueuesShared directive determines whether a print
># queue for a newly discovered IPP network printer (not remote CUPS
># queue) will be shared to the local network or not. This is only
># valid for newly discovered printers. For printers discovered in an
># earlier cups-browsed session, cups-browsed will remember whether the
># printer was shared, so changes by the user get conserved. Default is
># not to share newly discovered IPP printers.
>
># NewIPPPrinterQueuesShared Yes
>
>
># If there is more than one remote CUPS printer whose local queue
># would get the same name and AutoClustering is set to "Yes" (the
># default) only one local queue is created which makes up a
># load-balancing cluster of the remote printers which would get this
># queue name (implicit class). This means that when several jobs are
># sent to this queue they get distributed between the printers, using
># the method chosen by the LoadBalancing directive.
>
># Note that the forming of clusters depends on the naming scheme for
># local queues created by cups-browsed. If you have set
># LocalQueueNamingRemoteCUPS to "DNSSD" you will not get automatic
># clustering as the DNS-SD service names are always unique. With
># LocalQueueNamingRemoteCUPS set to "RemoteName" local queues are
># named as the CUPS queues on the remote servers are named and so
># equally named queues on different servers get clustered (this is how
># CUPS did it in version 1.5.x or older). LocalQueueNamingRemoteCUPS
># set to "MakeModel" makes remote printers of the same model get
># clustered. Note that then a cluster can contain more than one queue
># of the same server.
>
># With AutoClustering set to "No", for each remote CUPS printer an
># individual local queue is created, and to avoid name clashes when
># using the LocalQueueNamingRemoteCUPS settings "RemoteName" or
># "MakeModel" "@<server name>" is added to the local queue name.
>
># Only remote CUPS printers get clustered, not IPP network printers or
># IPP-over-USB printers.
>
># AutoClustering Yes
># AutoClustering No
>
>
># Load-balancing printer cluster formation can also be manually
># controlled by defining explicitly which remote CUPS printers should
># get clustered together.
>
># This is done by the "Cluster" directive:
>
># Cluster <QUEUENAME>: <EXPRESSION1> <EXPRESSION2> ...
># Cluster <QUEUENAME>
>
># If no expressions are given, <QUEUENAME> is used as the first and
># only expression for this cluster.
>
># Discovered printers are matched against all the expressions of all
># defined clusters. The first expression which matches the discovered
># printer determines to which cluster it belongs. Note that this way a
># printer can only belong to one cluster. Once matched, further
># cluster definitions will not checked any more.
>
># With the first printer matching a cluster's expression a local queue
># with the name <QUEUENAME> is created. If more printers are
># discovered and match this cluster, they join the cluster. Printing
># to this queue prints to all these printers in a load-balancing
># manner, according to to the setting of the LoadBalancing directive.
>
># Each expression must be a string of characters without spaces. If
># spaces are needed, replace them by underscores ('_').
>
># An expression can be matched in three ways:
>
># 1. By the name of the CUPS queue on the remote server
># 2. By make and model name of the remote printer
># 3. By the DNS-SD service name of the remote printer
>
># Note that the matching is done case-insensitively and any group of
># non-alphanumerical characters is replaced by a single underscore.
>
># So if an expression is "HP_DeskJet_2540" and the remote server
># reports "hp Deskjet-2540" the printer gets matched to this cluster.
>
># If "AutoClustering" is not set to "No" both your manual cluster
># definitions will be followed and automatic clustering of
># equally-named remote queues will be performed. If a printer matches
># in both categories the match to the manually defined cluster has
># priority. Automatic clustering of equally-named remote printers is
># not performed if there is a manually defined cluster with this name
># (at least as the printers do not match this cluster).
>
># Examples:
>
># To cluster all remote CUPS queues named "laserprinter" in your local
># network but not cluster any other equally-named remote CUPS printers
># use (Local queue will get named "laserprinter"):
>
># AutoClustering No
># Cluster laserprinter
>
># To cluster all remote CUPS queues of HP LaserJet 4050 printers in a
># local queue named "LJ4050":
>
># Cluster LJ4050: HP_LaserJet_4050
>
># As DNS-SD service names are unique in a network you can create a
># cluster from exactly specified printers (spaces replaced by
># underscors):
>
># Cluster hrdep: oldlaser_@_hr-server1 newlaser_@_hr-server2
>
>
># The LoadBalancing directive switches between two methods of handling
># load balancing between equally-named remote queues which are
># represented by one local print queue making up a cluster of them
># (implicit class).
>
># The two methods are:
>
># Queuing of jobs on the client (LoadBalancing QueueOnClient):
>
># Here we queue up the jobs on the client and regularly check the
># clustered remote print queues. If we find an idle queue, we pass
># on a job to it.
>
># This is also the method which CUPS uses for classes. Advantage is a
># more even distribution of the job workload on the servers
># (especially if the printing speed of the servers is very different),
># and if a server fails, there are not several jobs stuck or
># lost. Disadvantage is that if one takes the client (laptop, mobile
># phone, ...) out of the local network, printing stops with the jobs
># waiting in the local queue.
>
># Queuing of jobs on the servers (LoadBalancing QueueOnServers):
>
># Here we check the number of jobs on each of the clustered remote
># printers and send an incoming job immediately to the remote printer
># with the lowest amount of jobs in its queue. This way no jobs queue
># up locally, all jobs which are waiting are waiting on one of the
># remote servers.
>
># Not having jobs waiting locally has the advantage that we can take
># the local machine from the network and all jobs get printed.
># Disadvantage is that if a server with a full queue of jobs goes
># away, the jobs go away, too.
>
># Default is queuing the jobs on the client as this is what CUPS does
># with classes.
>
># LoadBalancing QueueOnClient
># LoadBalancing QueueOnServers
>
>
># With the DefaultOptions directive one or more option settings can be
># defined to be applied to every print queue newly created by
># cups-browsed. Each option is supplied as one supplies options with
># the "-o" command line argument to the "lpadmin" command (Run "man
># lpadmin" for more details). More than one option can be supplied
># separating the options by spaces. By default no option settings are
># pre-defined.
>
># Note that print queues which cups-browsed already created before
># remember their previous settings and so these settings do not get
># applied.
>
># DefaultOptions Option1=Value1 Option2=Value2 Option3 noOption4
>
>
># The AutoShutdown directive specifies whether cups-browsed should
># automatically terminate when it has no local raw queues set up
># pointing to any discovered remote printers or no jobs on such queues
># depending on AutoShutdownOn setting (auto shutdown mode). Setting it
># to "On" activates the auto-shutdown mode, setting it to "Off"
># deactiivates it (the default). The special mode "avahi" turns auto
># shutdown off while avahi-daemon is running and on when avahi-daemon
># stops. This allows running cups-browsed on-demand when avahi-daemon
># is run on-demand.
>
># AutoShutdown Off
># AutoShutdown On
># AutoShutdown avahi
>
>
># The AutoShutdownOn directive determines what event cups-browsed
># considers as inactivity in auto shutdown mode. "NoQueues" (the
># default) means that auto shutdown is initiated when there are no
># queues for discovered remote printers generated by cups-browsed any
># more. "NoJobs" means that all queues generated by cups-browsed are
># without jobs.
>
># AutoShutdownOn NoQueues
># AutoShutdownOn NoJobs
>
>
># The AutoShutdownTimeout directive specifies after how many seconds
># without local raw queues set up pointing to any discovered remote
># printers or jobs on these queues cups-browsed should actually shut
># down in auto shutdown mode. Default is 30 seconds, 0 means immediate
># shutdown.
>
># AutoShutdownTimeout 30
>
># NOTE: This file is not part of CUPS.
># You need to enable cups-browsed service
># and allow ipp-client service in firewall.

Actions: View

Attachments on bug 1567984: 1422552 | 1423398 | 1425571 | 1426462 | 1426464 | 1427149 | 1427150 | 1427151