Attachment 144043 Details for Bug 219216 – dmesg output loading ZEN kernel

dmesg output loading ZEN kernel

dmesg.log (text/plain), 23.41 KB, created by Andrew Vasquez on 2006-12-19 21:31:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Vasquez

Created: 2006-12-19 21:31:17 UTC

Size: 23.41 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
>Linux version 2.6.18-1.2747.el5xen (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Thu Nov 9 19:08:55 EST 2006
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000000f2f8c000 (usable)
>On node 0 totalpages: 995212
>  DMA zone: 995212 pages, LIFO batch:31
>DMI 2.4 present.
>ACPI: RSDP (v002 INTEL                                 ) @ 0x00000000000f0350
>ACPI: XSDT (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000009fb39120
>ACPI: FADT (v003 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000009fb36000
>ACPI: MADT (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000009fb35000
>ACPI: SPCR (v001 INTEL  S5000PAL 0x00000000 INTL 0x01000013) @ 0x000000009fb2e000
>ACPI: HPET (v001 INTEL  S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000009fb2d000
>ACPI: MCFG (v001 INTEL  S5000PAL 0x00000001 INTL 0x01000013) @ 0x000000009fb2c000
>ACPI: SSDT (v002 INTEL  S5000PAL 0x00004000 INTL 0x01000013) @ 0x000000009fb2b000
>ACPI: DSDT (v002 INTEL  S5000PAL 0x00000008 INTL 0x01000013) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at a0000000 (gap: 9fc00000:60200000)
>Built 1 zonelists.  Total pages: 995212
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 3724.026 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0xffff880005bff000 - 0xffff880009bff000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 3816828k/3980848k available (2315k kernel code, 155096k reserved, 1321k data, 172k init)
>Calibrating delay using timer specific routine.. 9313.88 BogoMIPS (lpj=18627778)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Initializing CPU#3
>Initializing CPU#4
>Initializing CPU#5
>Initializing CPU#6
>Brought up 8 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>Initializing CPU#7
>migration_cost=437
>checking if image is initramfs... it is
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at a0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:0e:0c.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO.PCIA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f could not be reserved
>pnp: 00:06: ioport range 0x800-0x87f has been reserved
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: b8900000-b89fffff
>  PREFETCH window: b8c00000-b8cfffff
>PCI: Bridge: 0000:03:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: b8900000-b89fffff
>  PREFETCH window: b8c00000-b8cfffff
>PCI: Bridge: 0000:02:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:02.0
>  IO window: 5000-5fff
>  MEM window: b8000000-b88fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: 5000-5fff
>  MEM window: b8000000-b89fffff
>  PREFETCH window: b8c00000-b8cfffff
>PCI: Bridge: 0000:01:00.3
>  IO window: 4000-4fff
>  MEM window: b8a00000-b8afffff
>  PREFETCH window: b8b00000-b8bfffff
>PCI: Bridge: 0000:00:02.0
>  IO window: 4000-5fff
>  MEM window: b8000000-b8bfffff
>  PREFETCH window: b8c00000-b8cfffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: 3000-3fff
>  MEM window: b8f00000-b8ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: 2000-2fff
>  MEM window: b8e00000-b8efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: b8d00000-b8dfffff
>  PREFETCH window: b0000000-b7ffffff
>GSI 16 sharing vector 0xA0 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>PCI: Setting latency timer of device 0000:03:00.2 to 64
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1166557004.708:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 82D8E9222122FAC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie02]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie02]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie02]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie02]
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Allocate Port Service[0000:01:00.0:pcie10]
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie20]
>Allocate Port Service[0000:02:00.0:pcie22]
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:01.0:pcie20]
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:02.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>ACPI: Invalid PBLK length [5]
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>GSI 17 sharing vector 0xA8 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 17
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x60b0-0x60b7, BIOS settings: hda:pio, hdb:DMA
>Probing IDE interface ide0...
>hdb: Slimtype COMBO SOSC-2483K, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Write protecting the kernel read-only data: 440k
>input: AT Translated Set 2 keyboard as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>USB Universal Host Controller Interface driver v3.0
>GSI 18 sharing vector 0xB0 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
>GSI 19 sharing vector 0xB8 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xb9000400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
>megasas: 0x1000:0x0411:0x8086:0x3501: bus 4:slot 14:func 0
>GSI 20 sharing vector 0xC0 and IRQ 20
>ACPI: PCI Interrupt 0000:04:0e.0[A] -> GSI 18 (level, low) -> IRQ 20
>megasas: FW now in Ready state
>scsi0 : LSI Logic SAS based MegaRAID driver
>  Vendor: SEAGATE   Model: ST373454SS        Rev: 0003
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  Vendor: INTEL     Model: SROMBSAS18E       Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 140623872 512-byte hdwr sectors (71999 MB)
>sda: test WP failed, assume Write Enabled
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 140623872 512-byte hdwr sectors (71999 MB)
>sda: test WP failed, assume Write Enabled
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: sda1 sda2
>sd 0:2:0:0: Attached scsi disk sda
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x60C8 ctl 0x60E6 bmdma 0x60A0 irq 17
>ata2: SATA max UDMA/133 cmd 0x60C0 ctl 0x60E2 bmdma 0x60A8 irq 17
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0x60CF
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0x60C7
>Emulex LightPulse Fibre Channel SCSI driver 8.1.10.1
>Copyright(c) 2004-2006 Emulex.  All rights reserved.
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>scsi3 :  on PCI bus 0c device 00 irq 16
>ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:0d:00.0 to 64
>scsi4 :  on PCI bus 0d device 00 irq 16
>QLogic Fibre Channel HBA Driver
>GSI 21 sharing vector 0xC8 and IRQ 21
>ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 24 (level, low) -> IRQ 21
>qla2xxx 0000:08:03.0: Found an ISP2422, irq 21, iobase 0xffffc20000030000
>qla2xxx 0000:08:03.0: Configuring PCI space...
>qla2xxx 0000:08:03.0: Configure NVRAM parameters...
>qla2xxx 0000:08:03.0: Verifying loaded RISC code...
>qla2xxx 0000:08:03.0: Allocated (64 KB) for EFT...
>qla2xxx 0000:08:03.0: Allocated (1413 KB) for firmware dump...
>qla2xxx 0000:08:03.0: Waiting for LIP to complete...
>qla2xxx 0000:08:03.0: Cable is unplugged...
>scsi5 : qla2xxx
>qla2xxx 0000:08:03.0: 
> QLogic Fibre Channel HBA Driver: 8.01.07-k1
>  QLogic QLA2462 - PCI-X 2.0 to 4Gb FC, Dual Channel
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:08:03.0 hdma-, host#=5, fw=4.00.23 [IP] 
>GSI 22 sharing vector 0xD0 and IRQ 22
>ACPI: PCI Interrupt 0000:08:03.1[B] -> GSI 27 (level, low) -> IRQ 22
>qla2xxx 0000:08:03.1: Found an ISP2422, irq 22, iobase 0xffffc20000196000
>qla2xxx 0000:08:03.1: Configuring PCI space...
>qla2xxx 0000:08:03.1: Configure NVRAM parameters...
>qla2xxx 0000:08:03.1: Verifying loaded RISC code...
>qla2xxx 0000:08:03.1: Allocated (64 KB) for EFT...
>qla2xxx 0000:08:03.1: Allocated (1413 KB) for firmware dump...
>qla2xxx 0000:08:03.1: Waiting for LIP to complete...
>qla2xxx 0000:08:03.1: Cable is unplugged...
>scsi6 : qla2xxx
>qla2xxx 0000:08:03.1: 
> QLogic Fibre Channel HBA Driver: 8.01.07-k1
>  QLogic QLA2462 - PCI-X 2.0 to 4Gb FC, Dual Channel
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:08:03.1 hdma-, host#=6, fw=4.00.23 [IP] 
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1166557090.137:2): selinux=0 auid=4294967295
>hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:cf:47:dc
>input: PC Speaker as /class/input/input2
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>GSI 23 sharing vector 0xD8 and IRQ 23
>ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:07:00.1 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 17
>e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:04:23:cf:47:dd
>Intel 82802 RNG detected
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sd 0:2:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 10 Mbps Half Duplex
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1166557107.748:3): audit_pid=2402 old=0 by auid=4294967295
>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>FS-Cache: Loaded
>FS-Cache: netfs 'nfs' registered for caching
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>Bridge firewalling registered
>device vif0.0 entered promiscuous mode
>xenbr0: port 1(vif0.0) entering learning state
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>e1000: peth0: e1000_watchdog: NIC Link is Up 10 Mbps Half Duplex
>e1000: peth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 219216: 143455 | 143956 | 143957 | 144043 | 161206