Attachment 144068 Details for Bug 220272 – dmesg after resuming

dmesg after resuming

dmesg.resume.txt (text/plain), 26.55 KB, created by Mack Stanley on 2006-12-20 00:26:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mack Stanley

Created: 2006-12-20 00:26:38 UTC

Size: 26.55 KB

patch

obsolete

>Linux version 2.6.18-1.2868.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:32:54 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001aef7000 (usable)
> BIOS-e820: 000000001aef7000 - 000000001af99000 (ACPI NVS)
> BIOS-e820: 000000001af99000 - 000000001bd91000 (usable)
> BIOS-e820: 000000001bd91000 - 000000001bd99000 (reserved)
> BIOS-e820: 000000001bd99000 - 000000001be2e000 (usable)
> BIOS-e820: 000000001be2e000 - 000000001be32000 (reserved)
> BIOS-e820: 000000001be32000 - 000000001beab000 (usable)
> BIOS-e820: 000000001beab000 - 000000001beef000 (ACPI NVS)
> BIOS-e820: 000000001beef000 - 000000001bef7000 (usable)
> BIOS-e820: 000000001bef7000 - 000000001beff000 (ACPI data)
> BIOS-e820: 000000001beff000 - 000000001bf00000 (usable)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>found SMP MP-table at 000fe860
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 114432
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 110336 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v000 GATEWA                                ) @ 0x000fe020
>ACPI: RSDT (v001 GATEWA 06DT04B  0x000007da      0x01000013) @ 0x1befe038
>ACPI: FADT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x1befd000
>ACPI: MADT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x1bef8000
>ACPI: MCFG (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x1bef7000
>ACPI: DSDT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID:  Product ID:  APIC at: 0xFEE00000
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
>Processors: 2
>Allocating PCI resources starting at 20000000 (gap: 1bf00000:e4080000)
>Detected 2667.233 MHz processor.
>Built 1 zonelists.  Total pages: 114432
>Kernel command line: ro root=LABEL=/ acpi=noirq rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 445864k/457728k available (2139k kernel code, 9960k reserved, 866k data, 240k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5337.94 BogoMIPS (lpj=2668973)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0e00 (from 0c00)
>CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07af000 soft=c078f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5332.94 BogoMIPS (lpj=2666474)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Total of 2 processors activated (10670.89 BogoMIPS).
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>migration_cost=1699
>checking if image is initramfs... it is
>Freeing initrd memory: 1519k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Probing PCI hardware
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x400-0x4cf could not be reserved
>pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 30100000-301fffff
>  PREFETCH window: 20000000-2fffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 1000-1fff
>  MEM window: 30000000-300fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:14.4 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1166539025.764:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 172537CBFDBE1E47
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD1600BB-22RDA0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: TSSTcorpCD/DVDW TS-H652D, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 386k
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 11, io mem 0x30204000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 11, io mem 0x30205000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 11, io mem 0x30206000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:11.0: version 2.0
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>ata1: SATA max UDMA/100 cmd 0xDC836680 ctl 0xDC83668A bmdma 0xDC836600 irq 10
>ata2: SATA max UDMA/100 cmd 0xDC8366C0 ctl 0xDC8366CA bmdma 0xDC836608 irq 10
>scsi0 : sata_sil
>ohci_hcd 0000:00:13.0: wakeup
>usb 1-4: new full speed USB device using ohci_hcd and address 2
>ata1: SATA link down (SStatus 0 SControl 310)
>scsi1 : sata_sil
>usb 1-4: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>ata2: SATA link down (SStatus 0 SControl 310)
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>ata3: SATA max UDMA/100 cmd 0xDC838480 ctl 0xDC83848A bmdma 0xDC838400 irq 11
>ata4: SATA max UDMA/100 cmd 0xDC8384C0 ctl 0xDC8384CA bmdma 0xDC838408 irq 11
>scsi2 : sata_sil
>ata3: SATA link down (SStatus 0 SControl 310)
>scsi3 : sata_sil
>ata4: SATA link down (SStatus 0 SControl 310)
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:0: Attached scsi removable disk sda
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:1: Attached scsi removable disk sdb
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:2: Attached scsi removable disk sdc
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:3: Attached scsi removable disk sdd
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1580 types, 170 bools, 1 sens, 1024 cats
>security:  59 classes, 49374 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda7, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1166539039.598:2): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>8139too Fast Ethernet driver 0.9.27
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>eth0: RealTek RTL8139 at 0xdc8ac000, 00:16:76:d6:27:f3, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8101'
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>sd 4:0:0:1: Attached scsi generic sg1 type 0
>sd 4:0:0:2: Attached scsi generic sg2 type 0
>sd 4:0:0:3: Attached scsi generic sg3 type 0
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>floppy0: no floppy controllers found
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on hda7, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda5, type ext3), uses xattr
>Adding 2096440k swap on /dev/hda6.  Priority:-1 extents:1 across:2096440k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (3576 buckets, 28608 max) - 228 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>audit(1166567871.214:3): avc:  denied  { read } for  pid=2250 comm="cupsd" name="libnss_mdns4_minimal.so.2" dev=hda7 ino=10454587 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1166567871.216:4): avc:  denied  { getattr } for  pid=2250 comm="cupsd" name="libnss_mdns4_minimal.so.2" dev=hda7 ino=10454587 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1166567871.216:5): avc:  denied  { execute } for  pid=2250 comm="cupsd" name="libnss_mdns4_minimal.so.2" dev=hda7 ino=10454587 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=file
>eth0: no IPv6 routers present
>audit(1166567880.001:6): avc:  denied  { search } for  pid=2071 comm="irqbalance" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1166567880.001:7): avc:  denied  { read } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>audit(1166567880.001:8): avc:  denied  { getattr } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>audit(1166567880.001:9): avc:  denied  { create } for  pid=2071 comm="irqbalance" scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:system_r:irqbalance_t:s0 tclass=udp_socket
>audit(1166567880.001:10): avc:  denied  { ioctl } for  pid=2071 comm="irqbalance" name="[9833]" dev=sockfs ino=9833 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:system_r:irqbalance_t:s0 tclass=udp_socket
>audit(1166567880.001:11): avc:  denied  { net_admin } for  pid=2071 comm="irqbalance" capability=12 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:system_r:irqbalance_t:s0 tclass=capability
>audit(1166567880.217:12): avc:  denied  { getattr } for  pid=2405 comm="hald" name="auto.misc" dev=hda7 ino=5178048 scontext=system_u:system_r:hald_t:s0 tcontext=system_u:object_r:automount_etc_t:s0 tclass=file
>audit(1166567887.081:13): avc:  denied  { execute } for  pid=2449 comm="setxkbmap" name="libnss_mdns4_minimal.so.2" dev=hda7 ino=10454587 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1166567890.000:14): avc:  denied  { search } for  pid=2071 comm="irqbalance" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1166567890.000:15): avc:  denied  { read } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>audit(1166567890.000:16): avc:  denied  { getattr } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>ehci_hcd 0000:00:13.2: remove, state 1
>usb usb3: USB disconnect, address 1
>ehci_hcd 0000:00:13.2: USB bus 3 deregistered
>ohci_hcd 0000:00:13.1: remove, state 4
>usb usb2: USB disconnect, address 1
>ohci_hcd 0000:00:13.1: USB bus 2 deregistered
>ohci_hcd 0000:00:13.0: remove, state 1
>usb usb1: USB disconnect, address 1
>usb 1-4: USB disconnect, address 2
>ohci_hcd 0000:00:13.0: USB bus 1 deregistered
>Disabling non-boot CPUs ...
>Cannot set affinity for irq 0
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks: ===================================================================================================================|
>pnp: Device 00:0a disabled.
>pnp: Device 00:09 disabled.
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Back to C!
>PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 14000)
>PM: Writing back config space on device 0000:00:11.0 at offset 1 (was 2b00000, writing 2b00007)
>PM: Writing back config space on device 0000:00:12.0 at offset f (was 10a, writing 10b)
>PM: Writing back config space on device 0000:00:12.0 at offset 9 (was 30207600, writing 30207400)
>PM: Writing back config space on device 0000:00:12.0 at offset 8 (was 3031, writing 3021)
>PM: Writing back config space on device 0000:00:12.0 at offset 7 (was 3081, writing 3079)
>PM: Writing back config space on device 0000:00:12.0 at offset 6 (was 3061, writing 3051)
>PM: Writing back config space on device 0000:00:12.0 at offset 5 (was 3085, writing 307d)
>PM: Writing back config space on device 0000:00:12.0 at offset 4 (was 3069, writing 3059)
>PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00000, writing 2b00007)
>PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804008, writing 804020)
>PCI: Enabling device 0000:00:14.2 (0000 -> 0002)
>hda_intel: azx_get_response timeout, switching to single_cmd mode...
>ata1: SATA link down (SStatus 0 SControl 310)
>ata2: SATA link down (SStatus 0 SControl 310)
>ata3: SATA link down (SStatus 0 SControl 310)
>ata4: SATA link down (SStatus 0 SControl 310)
>PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 810000, writing 814000)
>PM: Writing back config space on device 0000:01:05.0 at offset d (was 58, writing 50)
>PM: Writing back config space on device 0000:01:05.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4000)
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2900007, writing 2900207)
>pnp: Failed to activate device 00:05.
>pnp: Failed to activate device 00:06.
>pnp: Device 00:09 activated.
>pnp: Device 00:0a activated.
>Restarting tasks... done
>Enabling non-boot CPUs ...
>audit(1166568154.446:17): avc:  denied  { search } for  pid=2071 comm="irqbalance" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1166568154.446:18): avc:  denied  { read } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>audit(1166568154.446:19): avc:  denied  { getattr } for  pid=2071 comm="irqbalance" name="dev" dev=proc ino=-268435159 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=file
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07af000 soft=c078f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5332.90 BogoMIPS (lpj=2666450)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>CPU1 is up
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>PCI: Enabling device 0000:00:13.2 (0010 -> 0012)
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 11, io mem 0x30206000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 11, io mem 0x30204000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 11, io mem 0x30205000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>USB Universal Host Controller Interface driver v3.0
>usb 2-4: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:13.0: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.

Actions: View

Attachments on bug 220272: 144067 | 144068 | 144069