Attachment 144195 Details for Bug 220470 – boot ssequence [most of it...]

boot ssequence [most of it...]

boot_sequence (text/plain), 4.14 KB, created by Joseph Sacco on 2006-12-21 16:06:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joseph Sacco

Created: 2006-12-21 16:06:56 UTC

Size: 4.14 KB

patch

obsolete

>Using PowerMac machine description
>Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
>Linux version 2.6.19-1.2881.fc7smp (brewbuildere@js20-bc2-12.build.redhat.com) (gcc version 4.1.1 20061213 ....
>Found initrd at 0xc1a000000:0xc1e5a000
>Found UniNorth mempory controller & host bridge @ 0xf80000000 revision: 0x11
>Mapped at )xfdfc0000
>Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdf400000
>PowerMac motherboard: PowerMac G4 silver
>setup_arch: bootmem
>Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>nvram: Checking bank 0
>nmram: gen0=666, gen1=667
>nvram: Active bank is: 1
>nvram: OF partition at 0x210
>nvram: XF partition at 0xffffffff
>nvram: NR partition at 0xffffffff
>arch:exit
>Zone PFM ranges:
>  DMA              0 ->    196608
>  Normal      196608 ->    196608
>  Highmem     196608 ->    262144
>early_mode_map[1] active PFN ranges
>    0:        0 ->   262144
>Built 1 zonelists.  Total pages: 259584
>Kernel command line: root=/dev/VolGroup00/LigVol00 ro rhgb quiet
>mpic: Setting up MPIC " MPIC 1    " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 64, shift: 6, mask: 3f
>mpic: Initializing for 64 sources
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>GMT Delta read from XPRAM: 0 minutes, DST: on
>time_init: decrementer frequency = 33.290001 MHz
>time_init: processor frequency = 533.333332 MHz
>smp_core99_probe
>smp_core99_kick_cpu
>smp_core99_kick_cpu done
>core99_setup_cpu 0 done
>  
>
>
>RAMDISK driver initialize: 16 RAM disks of 16384K size 4096 blocksize
>MacIO PCI driver attached to Keylargo chipset
>input: Machintosh mouse button emulation as /class/input/unput0
>apm_emu: APM Emulation 0.5 initialed.
>adb: starting probe task...
>adb: finishing probe task...
>usbcode: registering new interface driver libusual
>mice: PS/2 mouse device common for all mice
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus uni-n 1 registered
>PowerMac i2c bus uni-n 0 registered
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol familt 1
>NET: Registered protocol familt 17
>input: PMU as /class/input/input1
>Freeing unused kernel memory: 220k init
>Red Hart nash version 6.0.5 starting
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
>ohci_hcd 0001:10:18.0: OHCI Host Controller
>ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0001:10:18.0: 1rq 27, io mem 0x80083000
>PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
>ohci_hcd 0001:10:18.0: OHCI Host Controller
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>SCSI subsystem initialized
>PCI: Enabling device 0001:10:14.0 (0014 -> 0017)
>sym0: <1010-33> rev 0x1 at pci 0001:10:14:0 irq 54
>sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>sym0: SCSI BUS has been reset.
>scsi0 : sym-2.2.3
>PCI: Enabling device 0001:10:14.1 (0014 -> 0017)
>sym1: <1010-33> rev 0x1 at pci 0001:10:14:1 irq 54
>sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
>sym1: SCSI BUS has been reset.
>sym1: SCSI BUS mode change from SE to SE.
>scsi1 : sym-2.2.3
>sym1: SCSI BUS has been reset.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>  Reading all physcial volumes. This may take a while...
>usb 1-2: configuration #1 chosen from 1 choice
>  No volume groups found
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 3 ports detected
>  Volume group "VolGroup00: not found
>mount: could not find filesystem '/dev/root'
>setuproot: moving /dev failed: No such file or directory
>setuproot: error mounting /proc: No such file or directory
>setuproot: error mounting /sys: No such file or directory
>switchroot: mount failed: No such file or directory
>Kernel panic - not syncing: Attempted to kill init!
><0>Rebooting in 180 seconds..
>
>

Actions: View

Attachments on bug 220470: 144195 | 147108 | 147122 | 147123 | 147502 | 147560 | 147613 | 147614 | 147615 | 147622 | 147623 | 147625 | 147626 | 147661 | 148114 | 148115 | 149620