Attachment 144222 Details for Bug 202137 – dmesg output

dmesg output

dmesg.liq (text/plain), 21.61 KB, created by Roland Wolters on 2006-12-21 21:14:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roland Wolters

Created: 2006-12-21 21:14:41 UTC

Size: 21.61 KB

patch

obsolete

>Linux version 2.6.18-1.2868.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:32:54 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data)
> BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 262096
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32720 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f64a0
>ACPI: XSDT (v001 A M I  OEMXSDT  0x11000422 MSFT 0x00000097) @ 0x3ffd0100
>ACPI: FADT (v003 A M I  OEMFACP  0x11000422 MSFT 0x00000097) @ 0x3ffd0290
>ACPI: OEMB (v001 A M I  AMI_OEM  0x11000422 MSFT 0x00000097) @ 0x3ffdf040
>ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x3ffd3f50
>ACPI: DSDT (v001  UW___ F08_____ 0x00000000 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
>Detected 1800.220 MHz processor.
>Built 1 zonelists.  Total pages: 262096
>Kernel command line: ro root=LABEL=/
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032788k/1048384k available (2139k kernel code, 14836k reserved, 866k data, 240k init, 130880k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3601.39 BogoMIPS (lpj=1800699)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3bf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0a00)
>CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06
>SMP motherboard not detected.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1410k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 6 9 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *9 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 6 9 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x600-0x60f has been reserved
>pnp: 00:07: ioport range 0x640-0x64f has been reserved
>pnp: 00:09: ioport range 0x1100-0x113f has been reserved
>pnp: 00:09: ioport range 0x1254-0x1254 has been reserved
>pnp: 00:09: ioport range 0x12d4-0x12d4 has been reserved
>pnp: 00:09: ioport range 0x1300-0x1375 has been reserved
>pnp: 00:09: ioport range 0x1377-0x137f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-bfff
>  MEM window: ffc00000-ffcfffff
>  PREFETCH window: ceb00000-deafffff
>PCI: Bus 3, cardbus bridge: 0000:02:0b.0
>  IO window: 0000c000-0000c0ff
>  IO window: 0000c400-0000c4ff
>  PREFETCH window: 50000000-51ffffff
>  MEM window: 56000000-57ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:0b.1
>  IO window: 0000cc00-0000ccff
>  IO window: 00001000-000010ff
>  PREFETCH window: 52000000-53ffffff
>  MEM window: 58000000-59ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: ffd00000-ffdfffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:0b.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:0b.1 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1166736194.608:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 172537CBFDBE1E47
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (75 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: FUJITSU MHT2080AT, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: QSI DVD+/-RW SDW-082S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:0b.0 [1584:3008]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0000, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>cs: IO port probe 0xc000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>Yenta: CardBus bridge found at 0000:02:0b.1 [1584:3008]
>Yenta: ISA IRQ mask 0x0000, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>cs: IO port probe 0xc000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xffd00000 - 0xffdfffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5<6>Time: tsc clocksource has been installed.
>)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 386k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000ec00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffeffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1580 types, 170 bools, 1 sens, 1024 cats
>security:  59 classes, 49346 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1166736203.461:2): policy loaded auid=4294967295
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee1394: Initialized config rom entry `ip1394'
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[ffdff800-ffdfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:02:0a.0: Try the "8139too" driver instead.
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>cs: IO port probe 0x100-0x3af:<6>8139too Fast Ethernet driver 0.9.27
> clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: excluding 0x860-0x86f
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: excluding 0x860-0x86f
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>eth1: RealTek RTL8139 at 0xf896a400, 00:03:0d:22:41:cb, IRQ 9
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d002552a4c4]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50468 usecs
>intel8x0: clocking to 48000
>PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [AC0] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on hda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hda2
>Ending clean XFS mount for filesystem: hda2
>SELinux: initialized (dev hda2, type xfs), uses xattr
>XFS mounting filesystem hda4
>Ending clean XFS mount for filesystem: hda4
>SELinux: initialized (dev hda4, type xfs), uses xattr
>Adding 1052248k swap on /dev/hda3.  Priority:-1 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>audit(1166732639.789:3): audit_pid=2246 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2434]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2434]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2472 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: peer interface eth0 not found, will wait for it to come up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2487 (vmnet-netifup)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2488 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2486 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2579 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2578 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 2 usecs
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>input: HID 0461:4d03 as /class/input/input3
>input: USB HID v1.00 Mouse [HID 0461:4d03] on usb-0000:00:1d.1-2
>NET: Registered protocol family 4
>NET: Registered protocol family 5
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>eth0: no IPv6 routers present
>eth0: link down

Actions: View

Attachments on bug 202137: 133997 | 134000 | 134160 | 140314 | 140315 | 144219 | 144222