Attachment 144292 Details for Bug 220625 – dmesg

dmesg

dmesg (text/plain), 14.80 KB, created by Jesse Keating on 2006-12-22 16:45:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jesse Keating

Created: 2006-12-22 16:45:43 UTC

Size: 14.80 KB

patch

obsolete

>Linux version 2.6.18-1.2849.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 12:36:14 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
> BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
> BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>223MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 57328
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 53232 pages, LIFO batch:15
>DMI 2.3 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 OID_00                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x0dfffbc0
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x0dfffac0
>ACPI: BOOT (v001 INSYDE ISC_BOOT 0x00000100 _CSI 0x00010101) @ 0x0dfffb50
>ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x0dfffb80
>ACPI: DSDT (v001 INSYDE     Demo 0x00001002 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 10000000 (gap: 0e000000:f1f80000)
>Detected 666.733 MHz processor.
>Built 1 zonelists.  Total pages: 57328
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (011cb000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 220264k/229312k available (2106k kernel code, 8484k reserved, 843k data, 240k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1334.09 BogoMIPS (lpj=667045)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c80)
>CPU0: AMD Mobile AMD Athlon (tm) XP 0000+  stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2124k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe83c4, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11 12 14 *15), disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: e0000000-efffffff
>  PREFETCH window: a0000000-afffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 5, 163840 bytes)
>TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1166784830.942:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 6E10EEA41F0341D3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected SiS 741 chipset
>agpgart: AGP aperture is 32M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>SIS5513: chipset revision 1
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD2000JB-00DUA0, ATA DISK drive
>hdb: HITACHI CDR-8330, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>hda: max request size: 512KiB
>hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 370k
>Time: acpi_pm clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 15
>PCI: setting IRQ 15 as level-triggered
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 15 (level, low) -> IRQ 15
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 15, io mem 0x10030000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 15 (level, low) -> IRQ 15
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 15, io mem 0x10031000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.2: irq 15, io mem 0x10032000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 15, io mem 0x10033000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>ohci_hcd 0000:00:03.1: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
>audit(1166784837.754:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1580 types, 170 bools, 1 sens, 1024 cats
>security:  59 classes, 49346 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1166784838.236:3): policy loaded auid=4294967295
>Linux Tulip driver version 1.1.13 (May 11, 2002)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
>eth0: Lite-On PNIC-II rev 37 at ce830000, 00:A0:CC:36:81:99, IRQ 7.
>sis900.c: v1.08.10 Apr. 2 2006
>PCI: Enabling device 0000:00:04.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>eth1: SiS 900 PCI Fast Ethernet at 0x1400, IRQ 15, 00:20:cb:20:00:4e.
>input: PC Speaker as /class/input/input0
>hdb: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>intel8x0_measure_ac97_clock: measured 50212 usecs
>intel8x0: clocking to 48000
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PBTN]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 458744k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:458744k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (1791 buckets, 14328 max) - 228 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 220625: 144292 | 144294