Attachment 144356 Details for Bug 220756 – dmesg, that shows output about kernel bug

dmesg, that shows output about kernel bug

dmesg.crash (text/plain), 23.28 KB, created by Dieter Bürßner on 2006-12-25 22:10:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dieter Bürßner

Created: 2006-12-25 22:10:01 UTC

Size: 23.28 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/1 rhgb quiet)
>Linux version 2.6.18-1.2868.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:29:48 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v000 P4M890                                ) @ 0x00000000000f80c0
>ACPI: RSDT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
>ACPI: FADT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
>ACPI: MCFG (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9700
>ACPI: MADT (v001 P4M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9600
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000003fee9780
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x000000003fee9c10
>ACPI: DSDT (v001 P4M890 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fee0000
>Bootmem setup node 0 0000000000000000-000000003fee0000
>On node 0 totalpages: 256432
>  DMA zone: 2699 pages, LIFO batch:0
>  DMA32 zone: 253733 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>Built 1 zonelists.  Total pages: 256432
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2128.125 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Memory: 1022372k/1047424k available (2405k kernel code, 24664k reserved, 1575k data, 204k init)
>Calibrating delay using timer specific routine.. 4257.35 BogoMIPS (lpj=2128677)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16625975
>Detected 16.625 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4255.39 BogoMIPS (lpj=2127696)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 536 cycles)
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=232 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>migration_cost=45
>checking if image is initramfs... it is
>Freeing initrd memory: 1552k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:02:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 17 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x400-0x47f could not be reserved
>pnp: 00:01: ioport range 0x500-0x50f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: dfa00000-dfafffff
>PCI: Bridge: 0000:00:02.0
>  IO window: b000-bfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: a000-afff
>  MEM window: dfd00000-dfdfffff
>  PREFETCH window: dfc00000-dfcfffff
>PCI: Bridge: 0000:00:13.0
>  IO window: 9000-9fff
>  MEM window: df900000-df9fffff
>  PREFETCH window: df800000-df8fffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1167086555.523:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key DF110FCA12BBB71F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie02]
>Allocate Port Service[0000:00:02.0:pcie03]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>Allocate Port Service[0000:00:03.0:pcie02]
>Allocate Port Service[0000:00:03.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
>VP_IDE: chipset revision 7
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: HL-DT-STDVD-RAM GSA-H20N, ATAPI CD/DVD-ROM drive
>hdb: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Write protecting the kernel read-only data: 461k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>GSI 18 sharing vector 0xD1 and IRQ 18
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 209
>PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 209, io base 0x0000e000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 19 sharing vector 0xD9 and IRQ 19
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 217
>PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 217, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 20 sharing vector 0xE1 and IRQ 20
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 225
>PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
>PCI: Setting latency timer of device 0000:00:10.2 to 64
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 225, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 21 sharing vector 0xE9 and IRQ 21
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233
>PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
>PCI: Setting latency timer of device 0000:00:10.3 to 64
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 233, io base 0x0000d400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 225
>PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 1
>PCI: Setting latency timer of device 0000:00:10.4 to 64
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 225, io mem 0xdffff000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 225
>sata_via 0000:00:0f.0: routed to hard irq line 11
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 225
>ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 225
>scsi0 : sata_via
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_via
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xF407
>  Vendor: ATA       Model: ST3320820AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>Initializing USB Mass Storage driver...
>usb 5-7: new high speed USB device using ehci_hcd and address 3
>usb 5-7: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>  Vendor: Generic   Model: Flash HS-CF       Rev: 4.55
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:0: Attached scsi removable disk sdb
>  Vendor: Generic   Model: Flash HS-MS/SD    Rev: 4.55
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:1: Attached scsi removable disk sdc
>  Vendor: Generic   Model: Flash HS-SM       Rev: 4.55
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:2: Attached scsi removable disk sdd
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1167086569.389:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49428 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda11, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1167086569.560:3): policy loaded auid=4294967295
>via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>eth0: VIA Rhine II at 0xdfffe000, 00:16:17:e6:89:fb, IRQ 233.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdb: ATAPI 40X DVD-ROM drive, 254kB Cache, UDMA(33)
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2F11
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>input: PC Speaker as /class/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:1: Attached scsi generic sg2 type 0
>sd 2:0:0:2: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>GSI 22 sharing vector 0x32 and IRQ 22
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:04:01.0 to 64
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on sda11, internal journal
>SELinux: initialized (dev sda10, type ext2), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda12, type ext2), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda13, type ext3), uses xattr
>SELinux: initialized (dev sda14, type vfat), uses genfs_contexts
>SELinux: initialized (dev sda15, type vfat), uses genfs_contexts
>SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
>SELinux: initialized (dev sda4, type vfat), uses genfs_contexts
>SELinux: initialized (dev sda6, type ext2), uses xattr
>SELinux: initialized (dev sda8, type ext2), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>audit(1167082986.322:4): avc:  denied  { search } for  pid=1901 comm="mount" name="/" dev=sda7 ino=2 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=dir
>ReiserFS: sda7: warning: xattrs/ACLs enabled and couldn't find/create .reiserfs_priv. Failing mount.
>Adding 4096532k swap on /dev/sda5.  Priority:-1 extents:1 across:4096532k
>list_add corruption. prev->next should be ffffffff8055c200, but was 0000000000000000
>----------- [cut here ] --------- [please bite here ] ---------
>Kernel BUG at lib/list_debug.c:31
>invalid opcode: 0000 [1] SMP 
>last sysfs file: /block/sda/size
>CPU 0 
>Modules linked in: reiserfs vfat fat dm_mirror dm_multipath dm_mod video sbs i2c_ec i2c_core button battery asus_acpi ac ipv6 parport_pc lp parport snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device floppy snd_pcm_oss sg snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr usblp ide_cd shpchp via_rhine serio_raw cdrom mii usb_storage sata_via libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>Pid: 1982, comm: mount Not tainted 2.6.18-1.2868.fc6 #1
>RIP: 0010:[<ffffffff8033dadf>]  [<ffffffff8033dadf>] __list_add+0x48/0x68
>RSP: 0018:ffff81003a69bb78  EFLAGS: 00010282
>RAX: 0000000000000058 RBX: ffffffff8055c200 RCX: ffffffff8065d840
>RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff805554f0
>RBP: ffff81003fd11800 R08: 0000000000000010 R09: 0000000000000400
>R10: 0000000000000000 R11: 0000000000000000 R12: ffff81003fd11800
>R13: 0000000000000000 R14: ffffffff80562c00 R15: 0000000000000000
>FS:  00002aaaaaadb4a0(0000) GS:ffffffff805e4000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 00002aaaaab09180 CR3: 000000003a97f000 CR4: 00000000000006e0
>Process mount (pid: 1982, threadinfo ffff81003a69a000, task ffff81003dde6080)
>Stack:  0000000000000000 ffff81003fd11800 ffff81003fd11800 ffffffff802d3492
> ffff81003a69bc08 ffffffff802d2cde ffffffff802d2cb2 ffff81003fed0580
> ffffffff80562c00 0000000000000000 0000000000000000 ffffffff802ecf76
>Call Trace:
> [<ffffffff802d3492>] sget+0x34c/0x383
> [<ffffffff802d3877>] get_sb_single+0x2f/0xb3
> [<ffffffff802d3768>] vfs_kern_mount+0x93/0x11a
> [<ffffffff802d3831>] do_kern_mount+0x36/0x4d
> [<ffffffff802dcbd1>] do_mount+0x692/0x702
> [<ffffffff8024aa2d>] sys_mount+0x8a/0xcd
> [<ffffffff8025bcce>] system_call+0x7e/0x83
>DWARF2 unwinder stuck at system_call+0x7e/0x83
>Leftover inexact backtrace:
>
>
>Code: 0f 0b 68 89 e8 48 80 c2 1f 00 4c 89 63 08 49 89 1c 24 4c 89 
>RIP  [<ffffffff8033dadf>] __list_add+0x48/0x68
> RSP <ffff81003a69bb78>
>

Actions: View

Attachments on bug 220756: 144356