Attachment 144380 Details for Bug 217935 – dmesg output on our server

dmesg output on our server

dmesg.txt (text/plain), 11.98 KB, created by Wayne Sherman on 2006-12-26 20:50:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wayne Sherman

Created: 2006-12-26 20:50:51 UTC

Size: 11.98 KB

patch

obsolete

>Linux version 2.6.18-1.2257.fc5 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Fri Dec 15 16:04:33 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
> BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
> BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
> BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>247MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 63472
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 59376 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f7340
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0f7f3000
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0f7f3040
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>Detected 797.961 MHz processor.
>Built 1 zonelists.  Total pages: 63472
>Kernel command line: ro root=LABEL=/ 3
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0733000 soft=c0732000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 246248k/253888k available (1984k kernel code, 7048k reserved, 729k data, 200k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1597.16 BogoMIPS (lpj=798583)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 00803035 80803035 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
>CPU: L2 Cache: 64K (32 bytes/line)
>CPU: After all inits, caps: 00803135 80803035 00000000 00000000 00000000 00000000 00000000
>CPU: Centaur VIA Ezra stepping 08
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 1e20)
>checking if image is initramfs... it is
>Freeing initrd memory: 918k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfaa80, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
>PCI quirk: region 5000-500f claimed by vt82c686 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e4000000-e6ffffff
>  PREFETCH window: 20000000-200fffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 5, 131072 bytes)
>TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1167144407.966:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 3A56AF23971F7AF3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: Getting cpuindex for acpiid 0x1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:07.1
>PCI: VIA IRQ fixup for 0000:00:07.1, from 255 to 0
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: IBM-DJNA-351520, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: ST3120026A, ATA DISK drive
>hdd: ST3120026A, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63
>hda: cache flushes not supported
> hda: hda1 hda2 hda3 hda4
>hdc: max request size: 512KiB
>hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hdc: cache flushes supported
> hdc: hdc1
>hdd: max request size: 512KiB
>hdd: Host Protected Area detected.
>	current capacity is 234439680 sectors (120033 MB)
>	native  capacity is 234441648 sectors (120034 MB)
>hdd: Host Protected Area disabled.
>hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hdd: cache flushes supported
> hdd: hdd1
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1 S4 S5)
>Freeing unused kernel memory: 200k freed
>Write protecting the kernel read-only data: 352k
>input: AT Translated Set 2 keyboard as /class/input/input0
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1167144425.931:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input1
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport_pc: VIA parallel port: io=0x378, irq=7
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>eth0: RealTek RTL8139 at 0xd00d2000, 00:20:ed:4a:25:0d, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>cyblafb: CyblaFB version 0.62 initializing
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Console: switching to colour frame buffer device 80x25
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
>PCI: Setting latency timer of device 0000:00:07.5 to 64
>Floppy drive(s): fd0 is 1.44M
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 5, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:07.3: UHCI Host Controller
>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:07.3: irq 5, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>  Vendor: Maxtor 6  Model: L250R0            Rev: BAH4
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>usb-storage: device scan complete
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi disk sda
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>EXT3 FS on hda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 530104k swap on /dev/hda2.  Priority:-1 extents:1 across:530104k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (1983 buckets, 15864 max) - 228 bytes per conntrack
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period

Actions: View

Attachments on bug 217935: 144380