Attachment 144468 Details for Bug 200777 – dmesg bootup for a non working system (Dell 2650, FC6, 2.6.19 custom kernel)

dmesg bootup for a non working system (Dell 2650, FC6, 2.6.19 custom kernel)

boot.log (text/plain), 22.23 KB, created by Norman R. Weathers on 2006-12-28 15:17:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Norman R. Weathers

Created: 2006-12-28 15:17:26 UTC

Size: 22.23 KB

patch

obsolete

>Linux version 2.6.19-cks2 (root@hoepld25) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 27 12:53:06 CST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
> BIOS-e820: 000000007ffe0000 - 000000007ffefc00 (ACPI data)
> BIOS-e820: 000000007ffefc00 - 000000007ffff000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Entering add_active_range(0, 0, 524256) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524256
>early_node_map[1] active PFN ranges
>    0:        0 ->   524256
>On node 0 totalpages: 524256
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2879 pages used for memmap
>  HighMem zone: 292001 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fdc40
>ACPI: RSDT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdc54
>ACPI: FADT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdc84
>ACPI: MADT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdcf8
>ACPI: SPCR (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdd80
>ACPI: DSDT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
>ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
>IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
>Detected 1790.601 MHz processor.
>Built 1 zonelists.  Total pages: 519137
>Kernel command line: ro root=LABEL=/1 debug verbose
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec01000)
>mapped IOAPIC to ffffa000 (fec02000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0451000 soft=c0431000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2068772k/2097024k available (1910k kernel code, 27036k reserved, 796k data, 192k init, 1179520k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc03fc000 - 0xc042c000   ( 192 kB)
>      .data : 0xc02dd95f - 0xc03a49b4   ( 796 kB)
>      .text : 0xc0100000 - 0xc02dd95f   (1910 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3583.67 BogoMIPS (lpj=17918366)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) XEON(TM) CPU 1.80GHz stepping 04
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0452000 soft=c0432000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3581.01 BogoMIPS (lpj=17905050)
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) XEON(TM) CPU 1.80GHz stepping 04
>Total of 2 processors activated (7164.68 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=213
>checking if image is initramfs... it is
>Freeing initrd memory: 1540k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc91e, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:0e.0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Root Bridge [PCI4] (0000:05)
>PCI: Probing PCI hardware (bus 05)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.ZION._PRT]
>ACPI: PCI Root Bridge [PCI3] (0000:04)
>PCI: Probing PCI hardware (bus 04)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
>ACPI: PCI Root Bridge [PCI2] (0000:03)
>PCI: Probing PCI hardware (bus 03)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:01)
>PCI: Probing PCI hardware (bus 01)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 *10 11 12 14)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 *5 6 7 10 11 12 14)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0x800-0x89f could not be reserved
>pnp: 00:09: ioport range 0x8a0-0x8af has been reserved
>pnp: 00:09: ioport range 0xc00-0xcd7 has been reserved
>pnp: 00:09: ioport range 0xf50-0xf58 has been reserved
>pnp: 00:09: ioport range 0x8e0-0x8e3 has been reserved
>PCI: Bridge: 0000:05:08.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:08.0
>  IO window: d000-dfff
>  MEM window: f8000000-fbffffff
>  PREFETCH window: f4000000-f7ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1167317986.240:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt 0000:00:04.1[B] -> GSI 23 (level, low) -> IRQ 16
>0000:00:04.1: ttyS2 at I/O 0xec80 (irq = 16) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
>SvrWks CSB5: chipset revision 147
>SvrWks CSB5: not 100% native mode: will probe irqs later
>SvrWks CSB5: simplex device: DMA forced
>    ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
>SvrWks CSB5: simplex device: DMA forced
>    ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 192k freed
>Write protecting the kernel read-only data: 353k
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfe100000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>SCSI subsystem initialized
>Adaptec aacraid driver (1.1-5[2409]-mh2)
>ACPI: PCI Interrupt 0000:05:08.1[A] -> GSI 30 (level, low) -> IRQ 17
>AAC0: kernel 2.8-0[6092] 
>AAC0: monitor 2.8-0[6092]
>AAC0: bios 2.8-0[6092]
>AAC0: serial 297821d3
>scsi0 : percraid
>scsi 0:0:0:0: Direct-Access     DELL     ROOT             V1.0 PQ: 0 ANSI: 2
>SCSI device sda: 143357184 512-byte hdwr sectors (73399 MB)
>sda: assuming Write Enabled
>sda: assuming drive cache: write through
>SCSI device sda: 143357184 512-byte hdwr sectors (73399 MB)
>sda: assuming Write Enabled
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi removable disk sda
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 18
>DAC960: ***** DAC960 RAID Driver Version 2.5.48 of 14 May 2006 *****
>DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
>DAC960#0: Configuring Mylex eXtremeRAID 3000 PCI RAID Controller
>DAC960#0:   Firmware Version: 7.01-00, Channels: 3, Memory Size: 64MB
>DAC960#0:   PCI Bus: 2, Device: 8, Function: 0, I/O Address: Unassigned
>DAC960#0:   PCI Address: 0xF8000000 mapped at 0xF8802000, IRQ Channel: 18
>DAC960#0:   Controller Queue Depth: 512, Maximum Blocks per Command: 2048
>DAC960#0:   Driver Queue Depth: 511, Scatter/Gather Limit: 128 of 257 Segments
>DAC960#0:   Physical Devices:
>DAC960#0:     0:7  Vendor: MYLEX     Model: eXtremeRAID 3000  Revision: 0701
>DAC960#0:          Wide Synchronous at 80 MB/sec
>DAC960#0:          Serial Number:   
>DAC960#0:     1:0  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0AVVQ000072431GAE
>DAC960#0:          Disk Status: Standby, 354566144 blocks
>DAC960#0:     1:1  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0B5T300007242ZRUF
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:2  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0BBL6000072431GDY
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:3  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0B7VT00007243FV2N
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:4  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0BGKY000022098H1K
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:5  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0BBGX000072430ZES
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:6  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0B9NJ000072431GER
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:7  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0A8M0000072431FTD
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:8  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0BA3B00007242ZRWH
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:9  Vendor: SEAGATE   Model: ST1181677FC       Revision: 0001
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number: 3EM0B9NA000072431GCP
>DAC960#0:          Disk Status: Online, 354566144 blocks
>DAC960#0:     1:125 Vendor: MYLEX     Model: eXtremeRAID 3000  Revision: 0701
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number:   
>DAC960#0:     2:125 Vendor: MYLEX     Model: eXtremeRAID 3000  Revision: 0701
>DAC960#0:          Synchronous at 125 MB/sec
>DAC960#0:          Serial Number:   
>DAC960#0:   Logical Drives:
>DAC960#0:     /dev/rd/c0d0: RAID-5, Online, 2836529152 blocks
>DAC960#0:                   Logical Device Initialized, BIOS Geometry: 128/32
>DAC960#0:                   Stripe Size: 1024KB, Segment Size: 64KB
>DAC960#0:                   Read Cache Disabled, Write Cache Disabled
> rd/c0d0: unknown partition table
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1167317991.830:2): selinux=0 auid=4294967295
>hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 28 (level, low) -> IRQ 19
>eth0: Tigon3 [partno(BCM95701A10) rev 0105 PHY(5701)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:06:5b:8e:ca:75
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] 
>eth0: dma_rwctrl[76db000f] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 29 (level, low) -> IRQ 20
>input: PC Speaker as /class/input/input1
>eth1: Tigon3 [partno(BCM95701A10) rev 0105 PHY(5701)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:06:5b:8e:ca:76
>eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0] 
>eth1: dma_rwctrl[76db000f] dma_mask[64-bit]
>Floppy drive(s): fd0 is 720k
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>FDC 0 is a National Semiconductor PC87306
>lp: driver loaded but no devices found
>ACPI: Power Button (FF) [PWRF]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>DAC960#0: Physical Device 1:0 Found
>DAC960#0: Physical Device 1:1 Found
>DAC960#0: Physical Device 1:2 Found
>DAC960#0: Physical Device 1:3 Found
>DAC960#0: Physical Device 1:5 Found
>DAC960#0: Physical Device 1:6 Found
>DAC960#0: Physical Device 1:7 Found
>DAC960#0: Physical Device 1:8 Found
>DAC960#0: Physical Device 1:9 Found
>DAC960#0: Physical Device 1:4 Found
>DAC960#0: Physical Device 1:1 Online
>DAC960#0: Physical Device 1:2 Online
>DAC960#0: Physical Device 1:3 Online
>DAC960#0: Physical Device 1:4 Online
>DAC960#0: Physical Device 1:5 Online
>DAC960#0: Physical Device 1:6 Online
>DAC960#0: Physical Device 1:7 Online
>DAC960#0: Physical Device 1:8 Online
>DAC960#0: Physical Device 1:9 Online
>DAC960#0: Logical Drive 0 (/dev/rd/c0d0) Found
>DAC960#0: Logical Drive 0 (/dev/rd/c0d0) Online
>DAC960#0: Physical Device 1:0 Standby
>DAC960#0: Controller Battery Backup Unit Found
>DAC960#0: Controller Battery Backup Unit Charge Level OK
>DAC960#0: Enclosure 0 Fan 0 OK
>DAC960#0: Enclosure 1 Fan 0 OK
>DAC960#0: Enclosure 0 Power Supply 0 OK
>DAC960#0: Enclosure 1 Power Supply 0 OK
>DAC960#0: Enclosure 0 Temperature Sensor 0 Temperature Normal
>EXT3 FS on sda1, internal journal
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sda5
>Ending clean XFS mount for filesystem: sda5
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 6289436k swap on /dev/sda2.  Priority:-1 extents:1 across:6289436k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>PM: Writing back config space on device 0000:04:06.0 at offset b (was 164514e4, writing 1211028)
>PM: Writing back config space on device 0000:04:06.0 at offset 3 (was 4000, writing 4010)
>PM: Writing back config space on device 0000:04:06.0 at offset 2 (was 2000000, writing 2000015)
>PM: Writing back config space on device 0000:04:06.0 at offset 1 (was 2b00000, writing 2b00146)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 200777: 141078 | 144414 | 144415 | 144467 | 144468 | 144469 | 148633 | 148634