Attachment 144565 Details for Bug 220984 – dmesg output (kernel-2.6.18-1.2913.2.1.el5.gtest.3)

dmesg output (kernel-2.6.18-1.2913.2.1.el5.gtest.3)

dmesg (text/plain), 26.79 KB, created by Milan Kerslager on 2006-12-29 22:47:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Milan Kerslager

Created: 2006-12-29 22:47:17 UTC

Size: 26.79 KB

patch

obsolete

>Linux version 2.6.18-1.2913.2.1.el5.gtest.3 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20061213 (Red Hat 4.1.1-46)) #1 SMP Wed Dec 20 17:50:37 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5be0
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 261856
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32480 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 IntelR                                ) @ 0x000f78b0
>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3000
>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3040
>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee6fc0
>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
>Detected 3194.940 MHz processor.
>Built 1 zonelists.  Total pages: 261856
>Kernel command line: ro root=/dev/md0 s
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec10000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031680k/1047424k available (2124k kernel code, 14988k reserved, 853k data, 240k init, 129920k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6391.57 BogoMIPS (lpj=3195788)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000180 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
>Total of 1 processors activated (6391.57 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1556k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb6e0, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:03:09.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSAB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HRB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:03.0
>  IO window: c000-cfff
>  MEM window: fa100000-fa1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fa000000-fa0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: 40000000-400fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1167433167.585:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 10E3EDE010C80234
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [THRM] (0 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 383k
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: GenPS/2 Genius Mouse as /class/input/input1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e100
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfa200000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>md: raid1 personality registered for level 1
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_mv 0000:02:03.0: version 0.7
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 26 (level, low) -> IRQ 201
>sata_mv 0000:02:03.0: 32 slots 8 ports SCSI mode IRQ via INTx
>ata1: SATA max UDMA/133 cmd 0x0 ctl 0xF89A2120 bmdma 0x0 irq 201
>ata2: SATA max UDMA/133 cmd 0x0 ctl 0xF89A4120 bmdma 0x0 irq 201
>ata3: SATA max UDMA/133 cmd 0x0 ctl 0xF89A6120 bmdma 0x0 irq 201
>ata4: SATA max UDMA/133 cmd 0x0 ctl 0xF89A8120 bmdma 0x0 irq 201
>ata5: SATA max UDMA/133 cmd 0x0 ctl 0xF89B2120 bmdma 0x0 irq 201
>ata6: SATA max UDMA/133 cmd 0x0 ctl 0xF89B4120 bmdma 0x0 irq 201
>ata7: SATA max UDMA/133 cmd 0x0 ctl 0xF89B6120 bmdma 0x0 irq 201
>ata8: SATA max UDMA/133 cmd 0x0 ctl 0xF89B8120 bmdma 0x0 irq 201
>scsi0 : sata_mv
>ata1.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 0
>ata1.00: configured for UDMA/133
>scsi1 : sata_mv
>ata2.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 0
>ata2.00: configured for UDMA/133
>scsi2 : sata_mv
>ata3.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata3.00: ata3: dev 0 multi count 0
>ata3.00: configured for UDMA/133
>scsi3 : sata_mv
>ata4.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata4.00: ata4: dev 0 multi count 0
>ata4.00: configured for UDMA/133
>scsi4 : sata_mv
>ata5.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata5.00: ata5: dev 0 multi count 0
>ata5.00: configured for UDMA/133
>scsi5 : sata_mv
>ata6.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata6.00: ata6: dev 0 multi count 0
>ata6.00: configured for UDMA/133
>scsi6 : sata_mv
>ata7.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
>ata7.00: ata7: dev 0 multi count 0
>ata7.00: configured for UDMA/133
>scsi7 : sata_mv
>ata8: no device found (phy stat 00000000)
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: Attached scsi disk sdb
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 sdc3
>sd 2:0:0:0: Attached scsi disk sdc
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 sdd3
>sd 3:0:0:0: Attached scsi disk sdd
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
>SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
> sde: sde1 sde2 sde3
>sd 4:0:0:0: Attached scsi disk sde
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
>SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
> sdf: sdf1 sdf2 sdf3
>sd 5:0:0:0: Attached scsi disk sdf
>  Vendor: ATA       Model: WDC WD4000KD-00N  Rev: 01.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 00 3a 00 00
>SCSI device sdg: drive cache: write back
>SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 00 3a 00 00
>SCSI device sdg: drive cache: write back
> sdg: sdg1 sdg2 sdg3
>sd 6:0:0:0: Attached scsi disk sdg
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdg3 ...
>md:  adding sdg3 ...
>md: sdg1 has different UUID to sdg3
>md:  adding sdf3 ...
>md: sdf1 has different UUID to sdg3
>md:  adding sde3 ...
>md: sde1 has different UUID to sdg3
>md:  adding sdd3 ...
>md: sdd1 has different UUID to sdg3
>md:  adding sdc3 ...
>md: sdc1 has different UUID to sdg3
>md:  adding sdb3 ...
>md: sdb1 has different UUID to sdg3
>md:  adding sda3 ...
>md: sda1 has different UUID to sdg3
>md: created md2
>md: bind<sda3>
>md: bind<sdb3>
>md: bind<sdc3>
>md: bind<sdd3>
>md: bind<sde3>
>md: bind<sdf3>
>md: bind<sdg3>
>md: running: <sdg3><sdf3><sde3><sdd3><sdc3><sdb3><sda3>
>md: md2: raid array is not clean -- starting background reconstruction
>md: personality for level 5 is not loaded!
>md: do_md_run() returned -22
>md: md2 stopped.
>md: unbind<sdg3>
>md: export_rdev(sdg3)
>md: unbind<sdf3>
>md: export_rdev(sdf3)
>md: unbind<sde3>
>md: export_rdev(sde3)
>md: unbind<sdd3>
>md: export_rdev(sdd3)
>md: unbind<sdc3>
>md: export_rdev(sdc3)
>md: unbind<sdb3>
>md: export_rdev(sdb3)
>md: unbind<sda3>
>md: export_rdev(sda3)
>md: considering sdg1 ...
>md:  adding sdg1 ...
>md:  adding sdf1 ...
>md:  adding sde1 ...
>md:  adding sdd1 ...
>md:  adding sdc1 ...
>md: sdb1 has different UUID to sdg1
>md: sda1 has different UUID to sdg1
>md: created md1
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sde1>
>md: bind<sdf1>
>md: bind<sdg1>
>md: running: <sdg1><sdf1><sde1><sdd1><sdc1>
>md: personality for level 5 is not loaded!
>md: do_md_run() returned -22
>md: md1 stopped.
>md: unbind<sdg1>
>md: export_rdev(sdg1)
>md: unbind<sdf1>
>md: export_rdev(sdf1)
>md: unbind<sde1>
>md: export_rdev(sde1)
>md: unbind<sdd1>
>md: export_rdev(sdd1)
>md: unbind<sdc1>
>md: export_rdev(sdc1)
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>md: md0: raid array is not clean -- starting background reconstruction
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>md: syncing RAID array md0
>md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
>md: using 128k window, over a total of 51199040 blocks.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: md0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 5795409
>EXT3-fs: md0: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1167433175.530:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1565 types, 170 bools, 1 sens, 1024 cats
>security:  59 classes, 48666 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1167433175.754:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>EDAC MC: Ver: 2.0.1 Dec 20 2006
>EDAC i82875p: i82875p init one
>PCI: Unable to reserve mem region #1:1000@fecf0000 for device 0000:00:06.0
>EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0
>i6300ESB timer: initialized (0xf887a000). heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>intel_rng: FWH not detected
>Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:01:01.0 to 64
>e1000: 0000:01:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:48:84:1d:24
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 19 (level, low) -> IRQ 185
>e1000: 0000:03:0a.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:48:84:1d:25
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>sd 6:0:0:0: Attached scsi generic sg6 type 0
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdc1 ...
>md:  adding sdc1 ...
>md:  adding sdd1 ...
>md:  adding sde1 ...
>md:  adding sdf1 ...
>md:  adding sdg1 ...
>md: sda3 has different UUID to sdc1
>md: sdb3 has different UUID to sdc1
>md: sdc3 has different UUID to sdc1
>md: sdd3 has different UUID to sdc1
>md: sde3 has different UUID to sdc1
>md: sdf3 has different UUID to sdc1
>md: sdg3 has different UUID to sdc1
>md: created md1
>md: bind<sdg1>
>md: bind<sdf1>
>md: bind<sde1>
>md: bind<sdd1>
>md: bind<sdc1>
>md: running: <sdc1><sdd1><sde1><sdf1><sdg1>
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  5132.000 MB/sec
>raid5: using function: pIII_sse (5132.000 MB/sec)
>raid6: int32x1    785 MB/s
>raid6: int32x2    824 MB/s
>raid6: int32x4    917 MB/s
>raid6: int32x8    765 MB/s
>raid6: mmxx1     1914 MB/s
>raid6: mmxx2     1980 MB/s
>raid6: sse1x1    1121 MB/s
>raid6: sse1x2    1265 MB/s
>raid6: sse2x1    2304 MB/s
>raid6: sse2x2    2277 MB/s
>raid6: using algorithm sse2x1 (2304 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>raid5: device sdc1 operational as raid disk 0
>raid5: device sdd1 operational as raid disk 1
>raid5: device sde1 operational as raid disk 2
>raid5: device sdf1 operational as raid disk 3
>raid5: device sdg1 operational as raid disk 4
>raid5: allocated 5245kB for md1
>raid5: raid level 5 set md1 active with 5 out of 5 devices, algorithm 2
>RAID5 conf printout:
> --- rd:5 wd:5 fd:0
> disk 0, o:1, dev:sdc1
> disk 1, o:1, dev:sdd1
> disk 2, o:1, dev:sde1
> disk 3, o:1, dev:sdf1
> disk 4, o:1, dev:sdg1
>md: considering sda3 ...
>md:  adding sda3 ...
>md:  adding sdb3 ...
>md:  adding sdc3 ...
>md:  adding sdd3 ...
>md:  adding sde3 ...
>md:  adding sdf3 ...
>md:  adding sdg3 ...
>md: created md2
>md: bind<sdg3>
>md: bind<sdf3>
>md: bind<sde3>
>md: bind<sdd3>
>md: bind<sdc3>
>md: bind<sdb3>
>md: bind<sda3>
>md: running: <sda3><sdb3><sdc3><sdd3><sde3><sdf3><sdg3>
>md: md2: raid array is not clean -- starting background reconstruction
>raid5: device sda3 operational as raid disk 0
>raid5: device sdb3 operational as raid disk 1
>raid5: device sdc3 operational as raid disk 2
>raid5: device sdd3 operational as raid disk 3
>raid5: device sde3 operational as raid disk 4
>raid5: device sdf3 operational as raid disk 5
>raid5: device sdg3 operational as raid disk 6
>raid5: allocated 7327kB for md2
>raid5: raid level 5 set md2 active with 7 out of 7 devices, algorithm 2
>RAID5 conf printout:
> --- rd:7 wd:7 fd:0
> disk 0, o:1, dev:sda3
> disk 1, o:1, dev:sdb3
> disk 2, o:1, dev:sdc3
> disk 3, o:1, dev:sdd3
> disk 4, o:1, dev:sde3
> disk 5, o:1, dev:sdf3
> disk 6, o:1, dev:sdg3
>md: ... autorun DONE.
>md: delaying resync of md2 until md0 has finished resync (they share one or more physical units)
>EXT3 FS on md0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>microcode: CPU0 updated from revision 0xd to 0x17, date = 04222005 
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8183 buckets, 65464 max) - 228 bytes per conntrack
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1167433209.426:4): audit_pid=2000 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth0: no IPv6 routers present
>md: md0: sync done.
>md: syncing RAID array md2
>md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
>md: using 128k window, over a total of 338457344 blocks.
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:sda1
> disk 1, wo:0, o:1, dev:sdb1

Actions: View

Attachments on bug 220984: 144565 | 144566 | 144567