Attachment 1445928 Details for Bug 1584278 – File: dmesg

File: dmesg

dmesg (text/plain), 175.73 KB, created by Ji Zo on 2018-05-30 15:38:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ji Zo

Created: 2018-05-30 15:38:39 UTC

Size: 175.73 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
>[    0.000000] Linux version 4.16.7-200.fc27.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.3.1 20180303 (Red Hat 7.3.1-5) (GCC)) #1 SMP Wed May 2 20:33:31 UTC 2018
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.7-200.fc27.x86_64 root=/dev/mapper/vg_trojhranek--0-root ro rd.luks.uuid=luks-52664c98-685c-4a86-8016-c63ca09a026b rd.lvm.lv=vg_trojhranek-0/root rd.lvm.lv=vg_trojhranek-0/swap rhgb quiet LANG=en_US.UTF-8
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba10afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ba10b000-0x00000000ba10dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ba10e000-0x00000000bba6afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bba6b000-0x00000000bbabefff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bbabf000-0x00000000bbb72fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bbb73000-0x00000000bbbbefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bbbbf000-0x00000000bbbe8fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bbbe9000-0x00000000bbbfefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000bbbff000-0x00000000bbbfffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bbc00000-0x00000000bfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.4 present.
>[    0.000000] DMI: Sony Corporation VGN-Z55TG_B/VAIO, BIOS R5031M3 11/10/2009
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-FFFFF uncachable
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
>[    0.000000]   3 base 0BBC00000 mask FFFC00000 uncachable
>[    0.000000]   4 base 100000000 mask F00000000 write-back
>[    0.000000]   5 base 200000000 mask FC0000000 write-back
>[    0.000000]   6 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: update [mem 0xbbc00000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xbbc00 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
>[    0.000000] BRK [0x123a78000, 0x123a78fff] PGTABLE
>[    0.000000] BRK [0x123a79000, 0x123a79fff] PGTABLE
>[    0.000000] BRK [0x123a7a000, 0x123a7afff] PGTABLE
>[    0.000000] BRK [0x123a7b000, 0x123a7bfff] PGTABLE
>[    0.000000] BRK [0x123a7c000, 0x123a7cfff] PGTABLE
>[    0.000000] BRK [0x123a7d000, 0x123a7dfff] PGTABLE
>[    0.000000] BRK [0x123a7e000, 0x123a7efff] PGTABLE
>[    0.000000] BRK [0x123a7f000, 0x123a7ffff] PGTABLE
>[    0.000000] BRK [0x123a80000, 0x123a80fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x35255000-0x36922fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
>[    0.000000] ACPI: XSDT 0x00000000BBBFE120 00006C (v01 Sony   VAIO     20091110      01000013)
>[    0.000000] ACPI: FACP 0x00000000BBBFD000 0000F4 (v04 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: DSDT 0x00000000BBBEC000 00B729 (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: FACS 0x00000000BBB92000 000040
>[    0.000000] ACPI: FACS 0x00000000BBB92000 000040
>[    0.000000] ACPI: HPET 0x00000000BBBFC000 000038 (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: APIC 0x00000000BBBFB000 00006C (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: MCFG 0x00000000BBBFA000 00003C (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: SLIC 0x00000000BBBF9000 000176 (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: ASF! 0x00000000BBBF8000 0000A5 (v32 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: BOOT 0x00000000BBBEB000 000028 (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: DBGP 0x00000000BBBEA000 000034 (v01 Sony   VAIO     20091110 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000BBBE9000 000655 (v01 Sony   VAIO     20091110 INTL 20051117)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x23ffd1000-0x23fffbfff]
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ba10afff]
>[    0.000000]   node   0: [mem 0x00000000ba10e000-0x00000000bba6afff]
>[    0.000000]   node   0: [mem 0x00000000bbabf000-0x00000000bbb72fff]
>[    0.000000]   node   0: [mem 0x00000000bbbbf000-0x00000000bbbe8fff]
>[    0.000000]   node   0: [mem 0x00000000bbbff000-0x00000000bbbfffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
>[    0.000000] On node 0 totalpages: 2079461
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11950 pages used for memmap
>[    0.000000]   DMA32 zone: 764743 pages, LIFO batch:31
>[    0.000000]   Normal zone: 20480 pages used for memmap
>[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 98 pages
>[    0.000000] Reserving Intel graphics memory at [mem 0xbc000000-0xbfffffff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xba10b000-0xba10dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbba6b000-0xbbabefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbbb73000-0xbbbbefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbbbe9000-0xbbbfefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbbc00000-0xbfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
>[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s143360 r8192 d28672 u524288
>[    0.000000] pcpu-alloc: s143360 r8192 d28672 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2046946
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.7-200.fc27.x86_64 root=/dev/mapper/vg_trojhranek--0-root ro rd.luks.uuid=luks-52664c98-685c-4a86-8016-c63ca09a026b rd.lvm.lv=vg_trojhranek-0/root rd.lvm.lv=vg_trojhranek-0/swap rhgb quiet LANG=en_US.UTF-8
>[    0.000000] Memory: 8069276K/8317844K available (12300K kernel code, 1567K rwdata, 3828K rodata, 2120K init, 1368K bss, 248568K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] ftrace: allocating 36322 entries in 142 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS: 65792, nr_irqs: 456, preallocated irqs: 16
>[    0.000000] 	Offload RCU callbacks from CPUs: .
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180105
>[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.005000] tsc: Fast TSC calibration using PIT
>[    0.006000] tsc: Detected 2659.924 MHz processor
>[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26575c3831d, max_idle_ns: 440795264378 ns
>[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.84 BogoMIPS (lpj=2659924)
>[    0.006000] pid_max: default: 32768 minimum: 301
>[    0.006000] Security Framework initialized
>[    0.006000] Yama: becoming mindful.
>[    0.006000] SELinux:  Initializing.
>[    0.006000] SELinux:  Starting in permissive mode
>[    0.010051] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.012229] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.012345] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.012414] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.012739] CPU: Physical Processor ID: 0
>[    0.012740] CPU: Processor Core ID: 0
>[    0.012742] mce: CPU supports 6 MCE banks
>[    0.012750] process: using mwait in idle threads
>[    0.012754] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.012755] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>[    0.012757] Spectre V2 : Mitigation: Full generic retpoline
>[    0.012897] Freeing SMP alternatives memory: 36K
>[    0.015000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8800  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
>[    0.015000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>[    0.015000] ... version:                2
>[    0.015000] ... bit width:              40
>[    0.015000] ... generic registers:      2
>[    0.015000] ... value mask:             000000ffffffffff
>[    0.015000] ... max period:             000000007fffffff
>[    0.015000] ... fixed-purpose events:   3
>[    0.015000] ... event mask:             0000000700000003
>[    0.015000] Hierarchical SRCU implementation.
>[    0.015161] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.015180] smp: Bringing up secondary CPUs ...
>[    0.015294] x86: Booting SMP configuration:
>[    0.015296] .... node  #0, CPUs:      #1
>[    0.019036] smp: Brought up 1 node, 2 CPUs
>[    0.019036] smpboot: Max logical packages: 2
>[    0.019036] smpboot: Total of 2 processors activated (10639.69 BogoMIPS)
>[    0.021047] devtmpfs: initialized
>[    0.021076] x86/mm: Memory block size: 128MB
>[    0.022109] PM: Registering ACPI NVS region [mem 0xba10b000-0xba10dfff] (12288 bytes)
>[    0.022111] PM: Registering ACPI NVS region [mem 0xbbb73000-0xbbbbefff] (311296 bytes)
>[    0.022169] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.022169] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.022169] pinctrl core: initialized pinctrl subsystem
>[    0.022207] RTC time: 14:44:06, date: 05/14/18
>[    0.022346] NET: Registered protocol family 16
>[    0.022458] audit: initializing netlink subsys (disabled)
>[    0.022464] audit: type=2000 audit(1526309045.022:1): state=initialized audit_enabled=0 res=1
>[    0.022464] cpuidle: using governor menu
>[    0.022464] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
>[    0.022464] Simple Boot Flag at 0x44 set to 0x1
>[    0.022464] ACPI: bus type PCI registered
>[    0.022464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.023005] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.023013] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.023015] PCI: Using configuration type 1 for base access
>[    0.024671] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.024671] cryptd: max_cpu_qlen set to 1000
>[    0.025068] ACPI: Added _OSI(Module Device)
>[    0.025069] ACPI: Added _OSI(Processor Device)
>[    0.025070] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.025071] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.025296] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.028232] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.043319] ACPI: Dynamic OEM Table Load:
>[    0.043325] ACPI: SSDT 0xFFFF9472B5C3FC00 0002A7 (v01 Sony   VAIO     20091110 INTL 20051117)
>[    0.044067] ACPI: Dynamic OEM Table Load:
>[    0.044072] ACPI: SSDT 0xFFFF9472B63AB000 0005B8 (v01 Sony   VAIO     20091110 INTL 20051117)
>[    0.044523] ACPI: Dynamic OEM Table Load:
>[    0.044528] ACPI: SSDT 0xFFFF9472B5C0CC00 0001CF (v01 Sony   VAIO     20091110 INTL 20051117)
>[    0.044735] ACPI: Dynamic OEM Table Load:
>[    0.044739] ACPI: SSDT 0xFFFF9472B5C2C900 00008D (v01 Sony   VAIO     20091110 INTL 20051117)
>[    0.045114] ACPI: EC: EC started
>[    0.045115] ACPI: EC: interrupt blocked
>[    0.256033] ACPI: \_SB_.PCI0.LPC_.H8EC: Used as first EC
>[    0.256035] ACPI: \_SB_.PCI0.LPC_.H8EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.256037] ACPI: \_SB_.PCI0.LPC_.H8EC: Used as boot DSDT EC to handle transactions
>[    0.256037] ACPI: Interpreter enabled
>[    0.256063] ACPI: (supports S0 S3 S4 S5)
>[    0.256065] ACPI: Using IOAPIC for interrupt routing
>[    0.256091] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.256343] ACPI: Enabled 12 GPEs in block 00 to 3F
>[    0.257438] acpi PNP0C15:00: ACPI dock station (docks/bays count: 1)
>[    0.258227] ACPI: Power Resource [MGPR] (on)
>[    0.259670] ACPI: Power Resource [DGPR] (on)
>[    0.265913] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.265918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.265998] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
>[    0.266003] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>[    0.266005] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>[    0.266007] acpi PNP0A08:00: _OSC: platform willing to grant []
>[    0.266008] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
>[    0.266021] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.266443] PCI host bridge to bus 0000:00
>[    0.266446] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.266447] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.266449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.266451] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
>[    0.266452] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
>[    0.266454] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.266463] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
>[    0.266486] DMAR: Forcing write-buffer flush capability
>[    0.266487] DMAR: Disabling IOMMU for graphics on this chipset
>[    0.266565] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
>[    0.266604] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.266683] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
>[    0.266695] pci 0000:00:02.0: reg 0x10: [mem 0xe8400000-0xe87fffff 64bit]
>[    0.266701] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.266706] pci 0000:00:02.0: reg 0x20: [io  0x9130-0x9137]
>[    0.266843] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
>[    0.266863] pci 0000:00:19.0: reg 0x10: [mem 0xeea00000-0xeea1ffff]
>[    0.266871] pci 0000:00:19.0: reg 0x14: [mem 0xeea24000-0xeea24fff]
>[    0.266880] pci 0000:00:19.0: reg 0x18: [io  0x9100-0x911f]
>[    0.266942] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.267028] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
>[    0.267094] pci 0000:00:1a.0: reg 0x20: [io  0x90e0-0x90ff]
>[    0.267227] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
>[    0.267276] pci 0000:00:1a.1: reg 0x20: [io  0x90c0-0x90df]
>[    0.267401] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
>[    0.267449] pci 0000:00:1a.2: reg 0x20: [io  0x90a0-0x90bf]
>[    0.267579] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
>[    0.271002] pci 0000:00:1a.7: reg 0x10: [mem 0xeea25c00-0xeea25fff]
>[    0.283041] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.283129] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
>[    0.283152] pci 0000:00:1b.0: reg 0x10: [mem 0xeea20000-0xeea23fff 64bit]
>[    0.283228] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.284023] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
>[    0.284098] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.284188] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
>[    0.284267] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.284360] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
>[    0.284439] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.284532] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
>[    0.284584] pci 0000:00:1d.0: reg 0x20: [io  0x9080-0x909f]
>[    0.284703] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
>[    0.284757] pci 0000:00:1d.1: reg 0x20: [io  0x9060-0x907f]
>[    0.284877] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
>[    0.284924] pci 0000:00:1d.2: reg 0x20: [io  0x9040-0x905f]
>[    0.285063] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
>[    0.289002] pci 0000:00:1d.7: reg 0x10: [mem 0xeea25800-0xeea25bff]
>[    0.301040] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.301121] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.301246] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
>[    0.301424] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
>[    0.301443] pci 0000:00:1f.2: reg 0x10: [io  0x9128-0x912f]
>[    0.301451] pci 0000:00:1f.2: reg 0x14: [io  0x913c-0x913f]
>[    0.301458] pci 0000:00:1f.2: reg 0x18: [io  0x9120-0x9127]
>[    0.301466] pci 0000:00:1f.2: reg 0x1c: [io  0x9138-0x913b]
>[    0.301474] pci 0000:00:1f.2: reg 0x20: [io  0x9020-0x903f]
>[    0.301481] pci 0000:00:1f.2: reg 0x24: [mem 0xeea25000-0xeea257ff]
>[    0.301524] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.301602] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
>[    0.301621] pci 0000:00:1f.3: reg 0x10: [mem 0xeea26000-0xeea260ff 64bit]
>[    0.301643] pci 0000:00:1f.3: reg 0x20: [io  0x9000-0x901f]
>[    0.301805] pci 0000:01:00.0: [10de:06e5] type 00 class 0x030000
>[    0.302014] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
>[    0.302031] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.302046] pci 0000:01:00.0: reg 0x1c: [mem 0xe2000000-0xe3ffffff 64bit]
>[    0.302059] pci 0000:01:00.0: reg 0x24: [io  0x8000-0x807f]
>[    0.302071] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    0.302098] pci 0000:01:00.0: enabling Extended Tags
>[    0.305033] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.305036] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
>[    0.305038] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xe4ffffff]
>[    0.305041] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.305143] acpiphp: Slot [1] registered
>[    0.305172] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
>[    0.305175] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
>[    0.305179] pci 0000:00:1c.0:   bridge window [mem 0xeda00000-0xee9fffff]
>[    0.305184] pci 0000:00:1c.0:   bridge window [mem 0xe8800000-0xe97fffff 64bit pref]
>[    0.305292] pci 0000:06:00.0: [8086:4232] type 00 class 0x028000
>[    0.305346] pci 0000:06:00.0: reg 0x10: [mem 0xec900000-0xec901fff 64bit]
>[    0.305549] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
>[    0.308046] pci 0000:00:1c.1: PCI bridge to [bus 06]
>[    0.308049] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
>[    0.308053] pci 0000:00:1c.1:   bridge window [mem 0xec900000-0xed9fffff]
>[    0.308058] pci 0000:00:1c.1:   bridge window [mem 0xe9800000-0xea7fffff 64bit pref]
>[    0.308131] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[    0.308164] pci 0000:08:00.0: reg 0x10: [mem 0xeb800000-0xeb803fff 64bit]
>[    0.308176] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[    0.308219] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    0.308289] pci 0000:08:00.0: supports D1 D2
>[    0.308291] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.311018] pci 0000:00:1c.3: PCI bridge to [bus 08]
>[    0.311022] pci 0000:00:1c.3:   bridge window [io  0x4000-0x5fff]
>[    0.311025] pci 0000:00:1c.3:   bridge window [mem 0xeb800000-0xec8fffff]
>[    0.311030] pci 0000:00:1c.3:   bridge window [mem 0xea800000-0xeb7fffff 64bit pref]
>[    0.311084] pci 0000:0b:04.0: [1180:0476] type 02 class 0x060700
>[    0.311107] pci 0000:0b:04.0: reg 0x10: [mem 0xe8000000-0xe8000fff]
>[    0.311137] pci 0000:0b:04.0: supports D1 D2
>[    0.311139] pci 0000:0b:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.311196] pci 0000:0b:04.1: [1180:0832] type 00 class 0x0c0010
>[    0.311217] pci 0000:0b:04.1: reg 0x10: [mem 0xe8001000-0xe80017ff]
>[    0.311296] pci 0000:0b:04.1: PME# supported from D0 D3hot D3cold
>[    0.311344] pci 0000:0b:04.2: [1180:0822] type 00 class 0x080500
>[    0.311364] pci 0000:0b:04.2: reg 0x10: [mem 0xe8001900-0xe80019ff]
>[    0.311443] pci 0000:0b:04.2: supports D1 D2
>[    0.311445] pci 0000:0b:04.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.311493] pci 0000:0b:04.4: [1180:0592] type 00 class 0x088000
>[    0.311514] pci 0000:0b:04.4: reg 0x10: [mem 0xe8001800-0xe80018ff]
>[    0.311592] pci 0000:0b:04.4: supports D1 D2
>[    0.311594] pci 0000:0b:04.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.311672] pci 0000:00:1e.0: PCI bridge to [bus 0b-0c] (subtractive decode)
>[    0.311676] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
>[    0.311679] pci 0000:00:1e.0:   bridge window [mem 0xe6000000-0xe80fffff]
>[    0.311684] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe1ffffff 64bit pref]
>[    0.311686] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.311688] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.311689] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.311691] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
>[    0.311693] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
>[    0.311732] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[    0.311737] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[    0.312307] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312366] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12)
>[    0.312478] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312535] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312591] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312648] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
>[    0.312704] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
>[    0.313574] ACPI: EC: interrupt unblocked
>[    0.313574] ACPI: EC: event unblocked
>[    0.313574] ACPI: \_SB_.PCI0.LPC_.H8EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.313574] ACPI: \_SB_.PCI0.LPC_.H8EC: Used as boot DSDT EC to handle transactions and events
>[    0.313578] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.313578] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.313578] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
>[    0.313578] pci 0000:01:00.0: vgaarb: bridge control possible
>[    0.313578] pci 0000:00:02.0: vgaarb: no bridge control possible
>[    0.313578] vgaarb: loaded
>[    0.313578] SCSI subsystem initialized
>[    0.313578] libata version 3.00 loaded.
>[    0.313578] ACPI: bus type USB registered
>[    0.313578] usbcore: registered new interface driver usbfs
>[    0.313578] usbcore: registered new interface driver hub
>[    0.314002] usbcore: registered new device driver usb
>[    0.314034] EDAC MC: Ver: 3.0.0
>[    0.314190] PCI: Using ACPI for IRQ routing
>[    0.315778] PCI: pci_cache_line_size set to 64 bytes
>[    0.315910] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.315911] e820: reserve RAM buffer [mem 0xba10b000-0xbbffffff]
>[    0.315912] e820: reserve RAM buffer [mem 0xbba6b000-0xbbffffff]
>[    0.315913] e820: reserve RAM buffer [mem 0xbbb73000-0xbbffffff]
>[    0.315914] e820: reserve RAM buffer [mem 0xbbbe9000-0xbbffffff]
>[    0.315915] e820: reserve RAM buffer [mem 0xbbc00000-0xbbffffff]
>[    0.316028] NetLabel: Initializing
>[    0.316029] NetLabel:  domain hash size = 128
>[    0.316029] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.316047] NetLabel:  unlabeled traffic allowed by default
>[    0.316096] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>[    0.316100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.316104] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.318012] clocksource: Switched to clocksource tsc-early
>[    0.336244] VFS: Disk quotas dquot_6.6.0
>[    0.336270] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.336364] pnp: PnP ACPI init
>[    0.337395] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.337398] system 00:00: [io  0x0600-0x060f] has been reserved
>[    0.337400] system 00:00: [io  0x0610] has been reserved
>[    0.337402] system 00:00: [io  0x0800-0x080f] has been reserved
>[    0.337403] system 00:00: [io  0x0810-0x0817] has been reserved
>[    0.337405] system 00:00: [io  0x0820-0x0823] has been reserved
>[    0.337407] system 00:00: [io  0x0400-0x047f] has been reserved
>[    0.337409] system 00:00: [io  0x0500-0x053f] has been reserved
>[    0.337410] system 00:00: [io  0x2000] has been reserved
>[    0.337412] system 00:00: [io  0x2004] has been reserved
>[    0.337415] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.337418] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.337419] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.337421] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.337423] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.337425] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.337427] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.337429] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.337431] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.337437] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.337471] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.337529] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.337558] pnp 00:03: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
>[    0.337601] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>[    0.337704] pnp: PnP ACPI: found 5 devices
>[    0.343791] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.343797] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    0.343800] pci 0000:08:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    0.343848] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
>[    0.343850] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
>[    0.343853] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.343855] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
>[    0.343858] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xe4ffffff]
>[    0.343860] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.343865] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
>[    0.343867] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
>[    0.343871] pci 0000:00:1c.0:   bridge window [mem 0xeda00000-0xee9fffff]
>[    0.343874] pci 0000:00:1c.0:   bridge window [mem 0xe8800000-0xe97fffff 64bit pref]
>[    0.343880] pci 0000:00:1c.1: PCI bridge to [bus 06]
>[    0.343882] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
>[    0.343887] pci 0000:00:1c.1:   bridge window [mem 0xec900000-0xed9fffff]
>[    0.343890] pci 0000:00:1c.1:   bridge window [mem 0xe9800000-0xea7fffff 64bit pref]
>[    0.343897] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb820000-0xeb83ffff pref]
>[    0.343899] pci 0000:00:1c.3: PCI bridge to [bus 08]
>[    0.343901] pci 0000:00:1c.3:   bridge window [io  0x4000-0x5fff]
>[    0.343905] pci 0000:00:1c.3:   bridge window [mem 0xeb800000-0xec8fffff]
>[    0.343908] pci 0000:00:1c.3:   bridge window [mem 0xea800000-0xeb7fffff 64bit pref]
>[    0.343918] pci 0000:0b:04.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
>[    0.343921] pci 0000:0b:04.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
>[    0.343923] pci 0000:0b:04.0: BAR 13: assigned [io  0x3000-0x30ff]
>[    0.343924] pci 0000:0b:04.0: BAR 14: assigned [io  0x3400-0x34ff]
>[    0.343926] pci 0000:0b:04.0: CardBus bridge to [bus 0c]
>[    0.343928] pci 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[    0.343932] pci 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[    0.343935] pci 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[    0.343939] pci 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[    0.343943] pci 0000:00:1e.0: PCI bridge to [bus 0b-0c]
>[    0.343946] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
>[    0.343950] pci 0000:00:1e.0:   bridge window [mem 0xe6000000-0xe80fffff]
>[    0.343953] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe1ffffff 64bit pref]
>[    0.343960] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.343961] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.343963] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.343964] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
>[    0.343966] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
>[    0.343968] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
>[    0.343969] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe4ffffff]
>[    0.343971] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.343972] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
>[    0.343974] pci_bus 0000:02: resource 1 [mem 0xeda00000-0xee9fffff]
>[    0.343975] pci_bus 0000:02: resource 2 [mem 0xe8800000-0xe97fffff 64bit pref]
>[    0.343977] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
>[    0.343979] pci_bus 0000:06: resource 1 [mem 0xec900000-0xed9fffff]
>[    0.343980] pci_bus 0000:06: resource 2 [mem 0xe9800000-0xea7fffff 64bit pref]
>[    0.343982] pci_bus 0000:08: resource 0 [io  0x4000-0x5fff]
>[    0.343983] pci_bus 0000:08: resource 1 [mem 0xeb800000-0xec8fffff]
>[    0.343985] pci_bus 0000:08: resource 2 [mem 0xea800000-0xeb7fffff 64bit pref]
>[    0.343986] pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
>[    0.343988] pci_bus 0000:0b: resource 1 [mem 0xe6000000-0xe80fffff]
>[    0.343989] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xe1ffffff 64bit pref]
>[    0.343991] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7 window]
>[    0.343992] pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff window]
>[    0.343994] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.343995] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xfebfffff window]
>[    0.343997] pci_bus 0000:0b: resource 8 [mem 0xfed40000-0xfed44fff window]
>[    0.343998] pci_bus 0000:0c: resource 0 [io  0x3000-0x30ff]
>[    0.344000] pci_bus 0000:0c: resource 1 [io  0x3400-0x34ff]
>[    0.344001] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf3ffffff pref]
>[    0.344003] pci_bus 0000:0c: resource 3 [mem 0xf4000000-0xf7ffffff]
>[    0.344139] NET: Registered protocol family 2
>[    0.344349] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
>[    0.344407] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.344648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.345028] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.345099] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.345150] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.345282] NET: Registered protocol family 1
>[    0.345304] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.373968] PCI: CLS 64 bytes, default 64
>[    0.374034] Unpacking initramfs...
>[    0.738197] Freeing initrd memory: 23352K
>[    0.738239] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.738243] software IO TLB [mem 0xb610b000-0xba10b000] (64MB) mapped at [0000000091c957f9-000000005317b177]
>[    0.739314] Initialise system trusted keyrings
>[    0.739325] Key type blacklist registered
>[    0.739357] workingset: timestamp_bits=36 max_order=21 bucket_order=0
>[    0.741158] zbud: loaded
>[    0.741957] SELinux:  Registering netfilter hooks
>[    0.969520] NET: Registered protocol family 38
>[    0.969523] Key type asymmetric registered
>[    0.969524] Asymmetric key parser 'x509' registered
>[    0.969592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
>[    0.969619] io scheduler noop registered
>[    0.969620] io scheduler deadline registered
>[    0.969694] io scheduler cfq registered (default)
>[    0.969695] io scheduler mq-deadline registered
>[    0.969757] atomic64_test: passed for x86-64 platform with CX8 and with SSE
>[    0.970164] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
>[    0.970818] intel_idle: does not run on family 6 model 23
>[    0.971138] ACPI: AC Adapter [AC] (on-line)
>[    0.971203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.971219] ACPI: Power Button [PWRB]
>[    0.971262] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    0.971271] ACPI: Lid Switch [LID0]
>[    0.971410] Monitor-Mwait will be used to enter C-1 state
>[    0.971416] Monitor-Mwait will be used to enter C-2 state
>[    0.971419] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.973308] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.973310] ACPI: Thermal Zone [ATF0] (43 C)
>[    0.973465] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    0.975524] Non-volatile memory driver v1.3
>[    0.975544] Linux agpgart interface v0.103
>[    0.975878] ahci 0000:00:1f.2: version 3.0
>[    0.976179] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.976216] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>[    0.976218] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
>[    0.977301] ACPI: Battery Slot [BAT0] (battery present)
>[    0.982178] scsi host0: ahci
>[    0.982335] scsi host1: ahci
>[    0.982436] scsi host2: ahci
>[    0.982509] scsi host3: ahci
>[    0.982583] scsi host4: ahci
>[    0.982668] scsi host5: ahci
>[    0.982707] ata1: SATA max UDMA/133 abar m2048@0xeea25000 port 0xeea25100 irq 24
>[    0.982709] ata2: SATA max UDMA/133 abar m2048@0xeea25000 port 0xeea25180 irq 24
>[    0.982710] ata3: DUMMY
>[    0.982711] ata4: DUMMY
>[    0.982713] ata5: SATA max UDMA/133 abar m2048@0xeea25000 port 0xeea25300 irq 24
>[    0.982714] ata6: SATA max UDMA/133 abar m2048@0xeea25000 port 0xeea25380 irq 24
>[    0.982820] libphy: Fixed MDIO Bus: probed
>[    0.982878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.982881] ehci-pci: EHCI PCI platform driver
>[    0.983038] ehci-pci 0000:00:1a.7: EHCI Host Controller
>[    0.983075] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    0.983088] ehci-pci 0000:00:1a.7: debug port 1
>[    0.987011] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
>[    0.987025] ehci-pci 0000:00:1a.7: irq 23, io mem 0xeea25c00
>[    0.990680] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    0.990774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.990776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.990778] usb usb1: Product: EHCI Host Controller
>[    0.990779] usb usb1: Manufacturer: Linux 4.16.7-200.fc27.x86_64 ehci_hcd
>[    0.990781] usb usb1: SerialNumber: 0000:00:1a.7
>[    0.990898] hub 1-0:1.0: USB hub found
>[    0.990907] hub 1-0:1.0: 6 ports detected
>[    0.991244] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    0.991282] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    0.991293] ehci-pci 0000:00:1d.7: debug port 1
>[    0.995183] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    0.995194] ehci-pci 0000:00:1d.7: irq 20, io mem 0xeea25800
>[    0.998747] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.998794] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.998796] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.998797] usb usb2: Product: EHCI Host Controller
>[    0.998799] usb usb2: Manufacturer: Linux 4.16.7-200.fc27.x86_64 ehci_hcd
>[    0.998800] usb usb2: SerialNumber: 0000:00:1d.7
>[    0.998905] hub 2-0:1.0: USB hub found
>[    0.998911] hub 2-0:1.0: 6 ports detected
>[    0.999105] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.999108] ohci-pci: OHCI PCI platform driver
>[    0.999118] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.999252] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    0.999290] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    0.999297] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    0.999315] uhci_hcd 0000:00:1a.0: irq 23, io base 0x000090e0
>[    0.999358] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.999360] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.999361] usb usb3: Product: UHCI Host Controller
>[    0.999363] usb usb3: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    0.999364] usb usb3: SerialNumber: 0000:00:1a.0
>[    0.999483] hub 3-0:1.0: USB hub found
>[    0.999489] hub 3-0:1.0: 2 ports detected
>[    0.999688] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    0.999742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    0.999748] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    0.999766] uhci_hcd 0000:00:1a.1: irq 23, io base 0x000090c0
>[    0.999809] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.999811] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.999813] usb usb4: Product: UHCI Host Controller
>[    0.999814] usb usb4: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    0.999816] usb usb4: SerialNumber: 0000:00:1a.1
>[    0.999916] hub 4-0:1.0: USB hub found
>[    0.999922] hub 4-0:1.0: 2 ports detected
>[    1.000135] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    1.000185] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    1.000192] uhci_hcd 0000:00:1a.2: detected 2 ports
>[    1.000209] uhci_hcd 0000:00:1a.2: irq 23, io base 0x000090a0
>[    1.000252] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.000254] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.000255] usb usb5: Product: UHCI Host Controller
>[    1.000257] usb usb5: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    1.000258] usb usb5: SerialNumber: 0000:00:1a.2
>[    1.000355] hub 5-0:1.0: USB hub found
>[    1.000363] hub 5-0:1.0: 2 ports detected
>[    1.000559] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.000617] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    1.000623] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    1.000641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009080
>[    1.000684] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.000686] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.000688] usb usb6: Product: UHCI Host Controller
>[    1.000689] usb usb6: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    1.000690] usb usb6: SerialNumber: 0000:00:1d.0
>[    1.000787] hub 6-0:1.0: USB hub found
>[    1.000793] hub 6-0:1.0: 2 ports detected
>[    1.001003] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.001056] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    1.001061] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    1.001079] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00009060
>[    1.001120] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.001122] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.001124] usb usb7: Product: UHCI Host Controller
>[    1.001125] usb usb7: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    1.001127] usb usb7: SerialNumber: 0000:00:1d.1
>[    1.001225] hub 7-0:1.0: USB hub found
>[    1.001231] hub 7-0:1.0: 2 ports detected
>[    1.001446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.001498] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    1.001504] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    1.001521] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00009040
>[    1.001565] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.001567] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.001568] usb usb8: Product: UHCI Host Controller
>[    1.001570] usb usb8: Manufacturer: Linux 4.16.7-200.fc27.x86_64 uhci_hcd
>[    1.001571] usb usb8: SerialNumber: 0000:00:1d.2
>[    1.001669] hub 8-0:1.0: USB hub found
>[    1.001675] hub 8-0:1.0: 2 ports detected
>[    1.001932] usbcore: registered new interface driver usbserial_generic
>[    1.001938] usbserial: USB Serial support registered for generic
>[    1.001975] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>[    1.002736] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.002736] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.005283] mousedev: PS/2 mouse device common for all mice
>[    1.005411] rtc_cmos 00:01: RTC can wake from S4
>[    1.005528] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    1.005553] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.005635] device-mapper: uevent: version 1.0.3
>[    1.005720] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    1.005981] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.006018] usbcore: registered new interface driver usbhid
>[    1.006019] usbhid: USB HID core driver
>[    1.006135] drop_monitor: Initializing network drop monitor service
>[    1.006258] Initializing XFRM netlink socket
>[    1.006452] NET: Registered protocol family 10
>[    1.009064] Segment Routing with IPv6
>[    1.009086] mip6: Mobile IPv6
>[    1.009088] NET: Registered protocol family 17
>[    1.009299] RAS: Correctable Errors collector initialized.
>[    1.009333] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
>[    1.009362] microcode: Microcode Update Driver: v2.2.
>[    1.009486] registered taskstats version 1
>[    1.009496] Loading compiled-in X.509 certificates
>[    1.021893] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    1.062886] Loaded X.509 cert 'Fedora kernel signing key: 3424ab77e01cec943217616974f8a7550133da6c'
>[    1.062922] zswap: loaded using pool lzo/zbud
>[    1.065147] Key type big_key registered
>[    1.067171] Key type encrypted registered
>[    1.067630]   Magic number: 2:215:738
>[    1.067813] rtc_cmos 00:01: setting system clock to 2018-05-14 14:44:07 UTC (1526309047)
>[    1.293203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.293890] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.294296] ata1.00: ATA-11: WDC WDS500G2B0A-00SM50, X61130WD, max UDMA/133
>[    1.294297] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    1.294744] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.295039] ata1.00: configured for UDMA/133
>[    1.295209] scsi 0:0:0:0: Direct-Access     ATA      WDC WDS500G2B0A- 30WD PQ: 0 ANSI: 5
>[    1.295426] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.295447] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    1.295459] sd 0:0:0:0: [sda] Write Protect is off
>[    1.295461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.295495] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.296356]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
>[    1.296842] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.330008] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.469163] usb 2-1: New USB device found, idVendor=0bda, idProduct=5401
>[    1.469165] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.469167] usb 2-1: Product: USB3.0 Hub
>[    1.469168] usb 2-1: Manufacturer: Realtek
>[    1.469435] hub 2-1:1.0: USB hub found
>[    1.470412] hub 2-1:1.0: 4 ports detected
>[    1.506027] usb 3-1: new full-speed USB device number 2 using uhci_hcd
>[    1.512005] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large:
>[    1.512007] clocksource:                       'hpet' wd_now: 805e559 wd_last: 10dfc82 mask: ffffffff
>[    1.512008] clocksource:                       'tsc-early' cs_now: a2e684b5a cs_last: 9dd5975d6 mask: ffffffffffffffff
>[    1.512079] clocksource: Switched to clocksource hpet
>[    1.586011] usb 2-2: new high-speed USB device number 3 using ehci-pci
>[    1.605404] ata2: SATA link down (SStatus 0 SControl 300)
>[    1.681880] usb 3-1: New USB device found, idVendor=147e, idProduct=1000
>[    1.681882] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.681883] usb 3-1: Product: Fingerprint Sensor   
>[    1.681885] usb 3-1: Manufacturer: TouchStrip        
>[    1.712832] random: crng init done
>[    1.714383] usb 2-2: New USB device found, idVendor=0409, idProduct=005a
>[    1.714385] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.714532] hub 2-2:1.0: USB hub found
>[    1.714638] hub 2-2:1.0: 3 ports detected
>[    1.790016] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
>[    1.871360] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
>[    1.884250] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
>[    1.884251] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.884253] usb 2-1.3: Product: Optical Mouse
>[    1.884254] usb 2-1.3: Manufacturer: Genius
>[    1.887998] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/0003:0458:003A.0001/input/input5
>[    1.888113] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.7-1.3/input0
>[    1.909527] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.186014] usb 8-2: new full-speed USB device number 2 using uhci_hcd
>[    2.202011] usb 1-2: new high-speed USB device number 3 using ehci-pci
>[    2.213473] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.216464] Freeing unused kernel memory: 2120K
>[    2.216466] Write protecting the kernel read-only data: 18432k
>[    2.217521] Freeing unused kernel memory: 2012K
>[    2.218284] Freeing unused kernel memory: 268K
>[    2.225244] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.225245] x86/mm: Checking user space page tables
>[    2.231867] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.231876] rodata_test: all tests were successful
>[    2.265726] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
>[    2.277165] systemd[1]: Detected architecture x86-64.
>[    2.277169] systemd[1]: Running in initial RAM disk.
>[    2.277209] systemd[1]: Set hostname to <trojhranek>.
>[    2.332781] usb 1-2: New USB device found, idVendor=05ca, idProduct=18b0
>[    2.332783] usb 1-2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
>[    2.332785] usb 1-2: Manufacturer: Ricoh co. Ltd.
>[    2.367036] usb 8-2: New USB device found, idVendor=044e, idProduct=3017
>[    2.367039] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.367041] usb 8-2: Product: BCM2046 Bluetooth Device
>[    2.367042] usb 8-2: Manufacturer: Broadcom Corp
>[    2.367044] usb 8-2: SerialNumber: 60380E0450F7
>[    2.401401] systemd[1]: Listening on Journal Socket (/dev/log).
>[    2.401564] systemd[1]: Reached target Timers.
>[    2.401703] systemd[1]: Listening on Journal Socket.
>[    2.401827] systemd[1]: Listening on udev Kernel Socket.
>[    2.402130] systemd[1]: Listening on Journal Audit Socket.
>[    2.402191] systemd[1]: Reached target Swap.
>[    2.446414] audit: type=1130 audit(1526309048.877:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.455229] audit: type=1130 audit(1526309048.886:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.481224] audit: type=1130 audit(1526309048.912:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.498827] audit: type=1130 audit(1526309048.929:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.590797] audit: type=1130 audit(1526309049.021:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.755115] audit: type=1130 audit(1526309049.184:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.755138] audit: type=1131 audit(1526309049.184:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.847562] usb 2-1.4: new low-speed USB device number 6 using ehci-pci
>[    2.913700] audit: type=1130 audit(1526309049.342:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.945728] usb 2-1.4: New USB device found, idVendor=062a, idProduct=0201
>[    2.945731] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.945732] usb 2-1.4: Product: USB-compliant keyboard
>[    2.950588] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.0/0003:062A:0201.0002/input/input6
>[    2.988890] audit: type=1130 audit(1526309049.417:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.002192] hid-generic 0003:062A:0201.0002: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.7-1.4/input0
>[    3.008201] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.1/0003:062A:0201.0003/input/input7
>[    3.061230] hid-generic 0003:062A:0201.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.7-1.4/input1
>[    3.431543] pps_core: LinuxPPS API ver. 1 registered
>[    3.431544] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    3.451114] sky2: driver version 1.30
>[    3.454268] PTP clock support registered
>[    3.455233] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[    3.455722] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[    3.513589] yenta_cardbus 0000:0b:04.0: CardBus bridge found [104d:9025]
>[    3.640814] yenta_cardbus 0000:0b:04.0: ISA IRQ mask 0x00b8, PCI irq 20
>[    3.640818] yenta_cardbus 0000:0b:04.0: Socket status: 30000006
>[    3.640836] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
>[    3.640838] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge window: [mem 0xe6000000-0xe80fffff]
>[    3.640840] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe6000000-0xe80fffff:
>[    3.640846]  excluding 0xe7ef0000-0xe80fffff
>[    3.640849] yenta_cardbus 0000:0b:04.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe1ffffff 64bit pref]
>[    3.640851] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe1ffffff:
>[    3.640866]  excluding 0xe0000000-0xe1ffffff
>[    3.663636] sdhci: Secure Digital Host Controller Interface driver
>[    3.663637] sdhci: Copyright(c) Pierre Ossman
>[    3.675137] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    3.675138] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    3.676319] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    3.784112] firewire_ohci 0000:0b:04.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
>[    3.794332] sky2 0000:08:00.0 ens4: renamed from eth0
>[    3.841414] sdhci-pci 0000:0b:04.2: SDHCI controller found [1180:0822] (rev 21)
>[    3.841529] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.841567] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
>[    3.864694] mmc0: SDHCI controller on PCI [0000:0b:04.2] using DMA
>[    3.917355] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:ba:6a:54:bd
>[    3.917357] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    3.917515] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
>[    3.933374] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    4.289124] firewire_core 0000:0b:04.1: created device fw0: GUID 0800460302d37a35, S400
>[    4.422293] MXM: GUID detected in BIOS
>[    4.422397] ACPI Warning: \_SB.PCI0.OVGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
>[    4.422519] ACPI Warning: \_SB.PCI0.PEGP.DGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
>[    4.422577] VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEGP.DGPU handle
>[    4.422640] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
>[    4.423590] nouveau 0000:01:00.0: NVIDIA G98 (298280a2)
>[    4.515087] pci 0000:00:00.0: Intel GM45 Chipset
>[    4.515108] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    4.515778] pci 0000:00:00.0: detected 65536K stolen memory
>[    4.515894] [drm] Replacing VGA console driver
>[    4.516590] Console: switching to colour dummy device 80x25
>[    4.569051] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    4.569052] [drm] Driver supports precise vblank timestamp query.
>[    5.260555] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
>[    5.334901] [drm] RC6 disabled, disabling runtime PM support
>[    5.336290] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
>[    5.469994] nouveau 0000:01:00.0: bios: unable to locate usable image
>[    5.470041] nouveau 0000:01:00.0: bios ctor failed, -22
>[    5.470061] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
>[    5.473148] nouveau: probe of 0000:01:00.0 failed with error -22
>[    5.473609] acpi device:00: registered as cooling_device2
>[    5.473797] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
>[    5.476970] ACPI: Video Device [DGPU] (multi-head: yes  rom: yes  post: no)
>[    5.480622] acpi device:06: registered as cooling_device3
>[    5.480791] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input9
>[    5.507159] fbcon: inteldrmfb (fb0) is primary device
>[    6.506521] Console: switching to colour frame buffer device 200x56
>[    6.530397] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   15.850100] kauditd_printk_skb: 6 callbacks suppressed
>[   15.850101] audit: type=1130 audit(1526309062.281:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2d52664c98\x2d685c\x2d4a86\x2d8016\x2dc63ca09a026b comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   16.054716] audit: type=1130 audit(1526309062.486:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   16.759715] audit: type=1130 audit(1526309063.190:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   16.778395] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   16.875698] audit: type=1130 audit(1526309063.307:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   16.875701] audit: type=1131 audit(1526309063.307:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.024459] audit: type=1130 audit(1526309063.456:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.033118] audit: type=1131 audit(1526309063.465:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.035824] audit: type=1130 audit(1526309063.467:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.035828] audit: type=1131 audit(1526309063.467:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.038220] audit: type=1130 audit(1526309063.470:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.188108] systemd-journald[165]: Received SIGTERM from PID 1 (systemd).
>[   17.225354] systemd: 18 output lines suppressed due to ratelimiting
>[   17.419905] SELinux: 32768 avtab hash slots, 108949 rules.
>[   17.438729] SELinux: 32768 avtab hash slots, 108949 rules.
>[   17.477747] SELinux:  8 users, 14 roles, 5095 types, 317 bools, 1 sens, 1024 cats
>[   17.477752] SELinux:  97 classes, 108949 rules
>[   17.483719] SELinux:  Permission getrlimit in class process not defined in policy.
>[   17.483865] SELinux:  Class sctp_socket not defined in policy.
>[   17.483865] SELinux:  Class icmp_socket not defined in policy.
>[   17.483866] SELinux:  Class ax25_socket not defined in policy.
>[   17.483867] SELinux:  Class ipx_socket not defined in policy.
>[   17.483867] SELinux:  Class netrom_socket not defined in policy.
>[   17.483868] SELinux:  Class atmpvc_socket not defined in policy.
>[   17.483869] SELinux:  Class x25_socket not defined in policy.
>[   17.483869] SELinux:  Class rose_socket not defined in policy.
>[   17.483870] SELinux:  Class decnet_socket not defined in policy.
>[   17.483871] SELinux:  Class atmsvc_socket not defined in policy.
>[   17.483871] SELinux:  Class rds_socket not defined in policy.
>[   17.483872] SELinux:  Class irda_socket not defined in policy.
>[   17.483872] SELinux:  Class pppox_socket not defined in policy.
>[   17.483873] SELinux:  Class llc_socket not defined in policy.
>[   17.483874] SELinux:  Class can_socket not defined in policy.
>[   17.483874] SELinux:  Class tipc_socket not defined in policy.
>[   17.483875] SELinux:  Class bluetooth_socket not defined in policy.
>[   17.483876] SELinux:  Class iucv_socket not defined in policy.
>[   17.483876] SELinux:  Class rxrpc_socket not defined in policy.
>[   17.483877] SELinux:  Class isdn_socket not defined in policy.
>[   17.483877] SELinux:  Class phonet_socket not defined in policy.
>[   17.483878] SELinux:  Class ieee802154_socket not defined in policy.
>[   17.483879] SELinux:  Class caif_socket not defined in policy.
>[   17.483879] SELinux:  Class alg_socket not defined in policy.
>[   17.483880] SELinux:  Class nfc_socket not defined in policy.
>[   17.483880] SELinux:  Class vsock_socket not defined in policy.
>[   17.483881] SELinux:  Class kcm_socket not defined in policy.
>[   17.483882] SELinux:  Class qipcrtr_socket not defined in policy.
>[   17.483882] SELinux:  Class smc_socket not defined in policy.
>[   17.483884] SELinux:  Class bpf not defined in policy.
>[   17.483885] SELinux: the above unknown classes and permissions will be allowed
>[   17.483893] SELinux:  policy capability network_peer_controls=1
>[   17.483893] SELinux:  policy capability open_perms=1
>[   17.483894] SELinux:  policy capability extended_socket_class=0
>[   17.483895] SELinux:  policy capability always_check_network=0
>[   17.483896] SELinux:  policy capability cgroup_seclabel=1
>[   17.483896] SELinux:  policy capability nnp_nosuid_transition=1
>[   17.483897] SELinux:  Completing initialization.
>[   17.483898] SELinux:  Setting up existing superblocks.
>[   17.510886] systemd[1]: Successfully loaded SELinux policy in 136.488ms.
>[   17.532525] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[   17.574373] systemd[1]: Relabelled /dev and /run in 33.917ms.
>[   17.974252] systemd-journald[742]: File /run/log/journal/8eb5eb8423a0424d92edaf993563bc6d/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[   17.977456] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   18.112888] systemd-journald[742]: Received request to flush runtime journal from PID 1
>[   18.128550] systemd-journald[742]: File /var/log/journal/8eb5eb8423a0424d92edaf993563bc6d/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[   18.517031] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
>[   18.527101] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
>[   18.536089] tpm tpm0: Adjusting TPM timeout parameters.
>[   18.553359] sony_laptop: detected Type2 model
>[   18.553459] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/SNY6001:00/input/input10
>[   18.553621] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/SNY6001:00/input/input11
>[   18.553789] sony_laptop: device allocated minor is 57
>[   18.554957] sony_laptop: SPIC setup done.
>[   18.595936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   18.668736] sony_laptop: SNC setup done.
>[   18.727635] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20180105/utaddress-247)
>[   18.727642] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   18.727645] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPIO) (20180105/utaddress-247)
>[   18.727649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   18.727649] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPIO) (20180105/utaddress-247)
>[   18.727653] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   18.727653] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   18.738404] media: Linux media interface: v0.10
>[   18.811252] Linux video capture interface: v2.00
>[   18.824072] r592: driver successfully loaded
>[   18.919070] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b0)
>[   18.923639] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
>[   18.923641] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
>[   18.923643] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
>[   18.923732] input: UVC Camera (05ca:18b0): Sony Vi as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
>[   18.923832] usbcore: registered new interface driver uvcvideo
>[   18.923833] USB Video Class driver (1.1.1)
>[   18.987585] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[   19.030725] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[   19.032926] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[   19.035299] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[   19.035301] cfg80211: failed to load regulatory.db
>[   19.056860] Bluetooth: Core ver 2.22
>[   19.056931] NET: Registered protocol family 31
>[   19.056932] Bluetooth: HCI device and connection manager initialized
>[   19.056937] Bluetooth: HCI socket layer initialized
>[   19.056940] Bluetooth: L2CAP socket layer initialized
>[   19.056957] Bluetooth: SCO socket layer initialized
>[   19.069539] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
>[   19.069830] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   19.069832] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   19.069834] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[   19.069835] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   19.069837] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
>[   19.069838] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   19.069840] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[   19.069842] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[   19.089248] usbcore: registered new interface driver btusb
>[   19.116432] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[   19.116506] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[   19.212263] Intel(R) Wireless WiFi driver for Linux
>[   19.212264] Copyright(c) 2003- 2015 Intel Corporation
>[   19.212543] iwlwifi 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   19.224868] iwlwifi 0000:06:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
>[   19.288070] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[   19.289051] tpm tpm0: TPM is disabled/deactivated (0x7)
>[   19.318148] tpm tpm0: A TPM error (7) occurred attempting get random
>[   19.360405] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[   19.360407] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[   19.360409] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   19.360411] iwlwifi 0000:06:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
>[   19.388388] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[   19.388390] iwlwifi 0000:06:00.0: reporting RF_KILL (radio disabled)
>[   19.445672] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   19.446431] iTCO_vendor_support: vendor-support=0
>[   19.448761] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   19.448813] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>[   19.523816] iwlwifi 0000:06:00.0 wlp6s0: renamed from wlan0
>[   19.604315] intel_powerclamp: No package C-state available
>[   19.799636] fuse init (API version 7.26)
>[   20.116463] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
>[   20.119944] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
>[   22.485930] kauditd_printk_skb: 58 callbacks suppressed
>[   22.485932] audit: type=1130 audit(1526301868.916:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-vg_trojhranek\x2d\x2d0\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.503967] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[   22.522370] audit: type=1130 audit(1526301868.953:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.527773] audit: type=1130 audit(1526301868.958:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.527933] audit: type=1131 audit(1526301868.958:88): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.546641] audit: type=1130 audit(1526301868.977:89): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.546674] audit: type=1131 audit(1526301868.977:90): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.567515] audit: type=1130 audit(1526301868.998:91): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.641208] audit: type=1130 audit(1526301869.072:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   22.672108] audit: type=1305 audit(1526301869.103:93): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[   22.695922] RPC: Registered named UNIX socket transport module.
>[   22.695924] RPC: Registered udp transport module.
>[   22.695925] RPC: Registered tcp transport module.
>[   22.695926] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   22.787426] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.800052] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.809061] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.836772] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.854077] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.871073] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.889055] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.908851] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.944057] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.971064] tpm tpm0: A TPM error (7) occurred attempting get random
>[   22.988528] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.006084] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.023053] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.040636] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.057857] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.075058] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.094171] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.111057] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.125918] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   23.125920] Bluetooth: BNEP filters: protocol multicast
>[   23.125924] Bluetooth: BNEP socket layer initialized
>[   23.128065] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.151574] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.177704] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.198061] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.217702] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.241268] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.259059] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.281745] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.301989] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.321086] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.338062] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.357921] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.378803] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.397968] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.420041] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.444570] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.468506] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.488052] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.506441] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.537787] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.562886] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.584715] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.601058] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.617860] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.634703] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.652048] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.668829] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.685700] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.702720] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.723621] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.744172] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.762885] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.783042] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.807056] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.833494] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.853048] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.873109] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.895515] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.913380] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.930062] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.947163] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.966818] tpm tpm0: A TPM error (7) occurred attempting get random
>[   23.986060] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.004624] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.021081] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.037879] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.054074] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.070893] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.087858] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.104780] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.121902] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.138712] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.155693] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.172099] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.188809] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.205765] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.222690] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.239101] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.255846] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.273107] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.289806] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.306813] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.323996] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.340785] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.357115] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.373806] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.390728] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.414688] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.432743] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.452102] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.469954] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.487049] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.508165] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.535621] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.555152] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.572866] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.589742] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.608051] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.624687] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.644964] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.662812] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.679931] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.697259] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.709682] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[   24.716953] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.736569] tpm tpm0: A TPM error (7) occurred attempting get random
>[   24.928247] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[   24.953051] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[   24.956083] sky2 0000:08:00.0 ens4: enabling interface
>[   24.963400] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[   24.981972] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[   25.547725] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
>[   27.617743] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[   27.617773] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[   40.029583] systemd-journald[742]: File /var/log/journal/8eb5eb8423a0424d92edaf993563bc6d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
>[   41.734035] Bluetooth: RFCOMM TTY layer initialized
>[   41.734043] Bluetooth: RFCOMM socket layer initialized
>[   41.734220] Bluetooth: RFCOMM ver 1.11
>[   43.990078] rfkill: input handler disabled
>[  107.280451] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
>[  159.411496] perf: interrupt took too long (3132 > 3130), lowering kernel.perf_event_max_sample_rate to 63000
>[  383.617734] sky2 0000:08:00.0 ens4: disabling interface
>[  385.260507] PM: suspend entry (deep)
>[  385.260509] PM: Syncing filesystems ... done.
>[  385.285441] Freezing user space processes ... (elapsed 0.004 seconds) done.
>[  385.290321] OOM killer disabled.
>[  385.290322] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  385.291897] Suspending console(s) (use no_console_suspend to debug)
>[  385.299063] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  385.300037] sd 0:0:0:0: [sda] Stopping disk
>[  385.360523] e1000e: EEE TX LPI TIMER: 00000000
>[  385.601673] PM: suspend devices took 0.310 seconds
>[  385.614461] ACPI: EC: interrupt blocked
>[  385.816416] ACPI: Preparing to enter system sleep state S3
>[  385.836578] ACPI: EC: event blocked
>[  385.836579] ACPI: EC: EC stopped
>[  385.836580] PM: Saving platform NVS memory
>[  385.836918] Disabling non-boot CPUs ...
>[  385.843901] smpboot: CPU 1 is now offline
>[  385.844021] ACPI: Low-level resume complete
>[  385.844021] ACPI: EC: EC started
>[  385.844021] PM: Restoring platform NVS memory
>[  385.849713] Enabling non-boot CPUs ...
>[  385.849761] x86: Booting SMP configuration:
>[  385.849763] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  386.841961]  cache: parent cpu1 should not be sleeping
>[  386.953047] CPU1 is up
>[  386.955494] ACPI: Waking up from system sleep state S3
>[  386.981325] ACPI: EC: interrupt unblocked
>[  387.185109] usb usb3: root hub lost power or was reset
>[  387.185165] usb usb4: root hub lost power or was reset
>[  387.185219] usb usb5: root hub lost power or was reset
>[  387.185398] usb usb6: root hub lost power or was reset
>[  387.185453] usb usb7: root hub lost power or was reset
>[  387.185507] usb usb8: root hub lost power or was reset
>[  387.185684] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[  387.185701] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  387.186737] sd 0:0:0:0: [sda] Starting disk
>[  387.188088] ACPI: button: The lid device is not compliant to SW_LID.
>[  387.196096] ACPI: EC: event unblocked
>[  387.501567] ata6: SATA link down (SStatus 0 SControl 300)
>[  387.501589] ata5: SATA link down (SStatus 0 SControl 300)
>[  387.501606] ata2: SATA link down (SStatus 0 SControl 300)
>[  387.501624] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  387.502340] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[  387.503706] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[  387.504338] ata1.00: configured for UDMA/133
>[  387.506070] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[  387.507046] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[  387.744068] firewire_core 0000:0b:04.1: rediscovered device fw0
>[  387.967628] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[  387.967629] tpm tpm0: TPM is disabled/deactivated (0x7)
>[  388.346996] PM: resume devices took 1.162 seconds
>[  388.347052] OOM killer enabled.
>[  388.347054] Restarting tasks ... done.
>[  388.379586] video LNXVIDEO:00: Restoring backlight state
>[  388.380944] video LNXVIDEO:01: Restoring backlight state
>[  388.382268] PM: suspend exit
>[  389.451445] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[  389.451459] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[  389.451599] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[  389.451605] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[  389.451614] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[  389.451624] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[  389.451633] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[  391.464354] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[  391.464396] pci 0000:08:00.0: reg 0x10: [mem 0xeb800000-0xeb803fff 64bit]
>[  391.464410] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[  391.464461] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[  391.464565] pci 0000:08:00.0: supports D1 D2
>[  391.464566] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[  391.468378] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[  391.468385] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[  391.468465] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[  391.468468] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[  391.468482] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[  391.468491] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[  391.468492] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[  391.468497] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[  391.468501] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[  391.468506] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[  391.468728] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[  391.469144] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[  391.584371] e1000e: enp0s25 NIC Link is Down
>[  391.589189] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[  391.792227] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[  391.793629] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[  391.822341] sky2 0000:08:00.0 ens4: renamed from eth0
>[  391.842072] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[  391.845112] sky2 0000:08:00.0 ens4: enabling interface
>[  391.848199] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[  394.340116] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[  394.340116] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[  579.154061] perf: interrupt took too long (3938 > 3915), lowering kernel.perf_event_max_sample_rate to 50000
>[ 1236.342051] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
>[ 1236.433013] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=5d11
>[ 1236.433017] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[ 1236.433020] usb 2-1.2: Product: Photosmart C5200 series
>[ 1236.433023] usb 2-1.2: Manufacturer: HP
>[ 1236.433025] usb 2-1.2: SerialNumber: MY7AVD11TY0559
>[ 1237.024224] usblp 2-1.2:1.1: usblp0: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D11
>[ 1237.024733] usbcore: registered new interface driver usblp
>[ 1237.026681] usb-storage 2-1.2:1.3: USB Mass Storage device detected
>[ 1237.045027] scsi host6: usb-storage 2-1.2:1.3
>[ 1237.045150] usbcore: registered new interface driver usb-storage
>[ 1237.054127] usbcore: registered new interface driver uas
>[ 1238.048880] scsi 6:0:0:0: Direct-Access     HP                        1.00 PQ: 0 ANSI: 5
>[ 1238.050162] sd 6:0:0:0: Attached scsi generic sg1 type 0
>[ 1238.055219] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[ 1242.233955] usblp0: removed
>[ 1242.238722] usblp 2-1.2:1.1: usblp0: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D11
>[ 1247.672890] usblp0: removed
>[ 1247.672961] Did not find alt setting 1 for intf 0, config 1
>[ 1247.675530] Did not find alt setting 1 for intf 0, config 1
>[ 1365.435144] usb 2-1.2: USB disconnect, device number 7
>[ 1576.183301] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
>[ 1997.808699] perf: interrupt took too long (4940 > 4922), lowering kernel.perf_event_max_sample_rate to 40000
>[ 2659.918047] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
>[ 2660.009252] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 2660.009259] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 2660.009264] usb 2-1.2: Product: GT-I9100
>[ 2660.009270] usb 2-1.2: Manufacturer: samsung
>[ 2660.009274] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 3074.557257] sky2 0000:08:00.0 ens4: disabling interface
>[ 3075.974563] PM: suspend entry (deep)
>[ 3075.974565] PM: Syncing filesystems ... done.
>[ 3076.018253] Freezing user space processes ... (elapsed 0.005 seconds) done.
>[ 3076.023340] OOM killer disabled.
>[ 3076.023340] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 3076.024921] Suspending console(s) (use no_console_suspend to debug)
>[ 3076.038050] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 3076.038961] sd 0:0:0:0: [sda] Stopping disk
>[ 3076.094280] e1000e: EEE TX LPI TIMER: 00000000
>[ 3076.154902] PM: suspend devices took 0.130 seconds
>[ 3076.167406] ACPI: EC: interrupt blocked
>[ 3076.376410] ACPI: Preparing to enter system sleep state S3
>[ 3076.396657] ACPI: EC: event blocked
>[ 3076.396658] ACPI: EC: EC stopped
>[ 3076.396659] PM: Saving platform NVS memory
>[ 3076.396993] Disabling non-boot CPUs ...
>[ 3076.404900] smpboot: CPU 1 is now offline
>[ 3076.405067] ACPI: Low-level resume complete
>[ 3076.405067] ACPI: EC: EC started
>[ 3076.405067] PM: Restoring platform NVS memory
>[ 3076.410696] Enabling non-boot CPUs ...
>[ 3076.410748] x86: Booting SMP configuration:
>[ 3076.410749] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 3076.628786]  cache: parent cpu1 should not be sleeping
>[ 3076.741045] CPU1 is up
>[ 3076.743412] ACPI: Waking up from system sleep state S3
>[ 3076.769768] ACPI: EC: interrupt unblocked
>[ 3076.976678] usb usb5: root hub lost power or was reset
>[ 3076.976900] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3076.977041] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[ 3076.977373] usb usb6: root hub lost power or was reset
>[ 3076.977466] usb usb7: root hub lost power or was reset
>[ 3076.977522] usb usb8: root hub lost power or was reset
>[ 3076.977713] usb usb3: root hub lost power or was reset
>[ 3076.978085] usb usb4: root hub lost power or was reset
>[ 3076.981174] sd 0:0:0:0: [sda] Starting disk
>[ 3076.989085] ACPI: EC: event unblocked
>[ 3077.293539] ata5: SATA link down (SStatus 0 SControl 300)
>[ 3077.293560] ata2: SATA link down (SStatus 0 SControl 300)
>[ 3077.293580] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 3077.293598] ata6: SATA link down (SStatus 0 SControl 300)
>[ 3077.294307] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 3077.295709] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 3077.296345] ata1.00: configured for UDMA/133
>[ 3077.298069] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 3077.298076] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[ 3077.536064] firewire_core 0000:0b:04.1: rediscovered device fw0
>[ 3077.759788] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[ 3077.759790] tpm tpm0: TPM is disabled/deactivated (0x7)
>[ 3077.896413] PM: resume devices took 0.920 seconds
>[ 3077.896461] OOM killer enabled.
>[ 3077.896462] Restarting tasks ... done.
>[ 3077.939622] video LNXVIDEO:00: Restoring backlight state
>[ 3077.942558] video LNXVIDEO:01: Restoring backlight state
>[ 3077.943937] PM: suspend exit
>[ 3078.988410] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[ 3078.988425] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[ 3078.988565] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[ 3078.988572] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[ 3078.988581] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[ 3078.988591] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[ 3078.988600] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[ 3080.956621] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[ 3080.956683] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[ 3080.956706] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[ 3080.956777] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[ 3080.956929] pci 0000:08:00.0: supports D1 D2
>[ 3080.956934] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[ 3080.960252] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[ 3080.960264] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[ 3080.960407] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[ 3080.960416] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[ 3080.960439] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[ 3080.960454] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[ 3080.960459] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[ 3080.960469] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[ 3080.960478] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[ 3080.960487] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[ 3080.960845] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[ 3080.961807] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[ 3081.080302] e1000e: enp0s25 NIC Link is Down
>[ 3081.083043] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[ 3081.288398] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[ 3081.293997] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[ 3081.297875] sky2 0000:08:00.0 ens4: renamed from eth0
>[ 3081.329240] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[ 3081.332271] sky2 0000:08:00.0 ens4: enabling interface
>[ 3081.336354] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[ 3084.010975] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[ 3084.010975] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[ 5343.785045] usb 2-1.2: USB disconnect, device number 8
>[ 5343.975034] usb 2-1.2: new high-speed USB device number 9 using ehci-pci
>[ 5344.058882] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 5344.058885] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 5344.058887] usb 2-1.2: Product: GT-I9100
>[ 5344.058889] usb 2-1.2: Manufacturer: samsung
>[ 5344.058890] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 5344.708039] usb 2-1.2: reset high-speed USB device number 9 using ehci-pci
>[ 7693.798909] usb 2-1.2: USB disconnect, device number 9
>[ 7694.196032] usb 2-1.2: new high-speed USB device number 10 using ehci-pci
>[ 7695.124090] usb 2-1.2: device descriptor read/64, error -71
>[ 7695.940075] usb 2-1.2: device descriptor read/64, error -71
>[ 7696.124071] usb 2-1.2: new high-speed USB device number 11 using ehci-pci
>[ 7696.215501] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7696.215508] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7696.215514] usb 2-1.2: Product: GT-I9100
>[ 7696.215519] usb 2-1.2: Manufacturer: samsung
>[ 7696.215524] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7696.234601] usb 2-1.2: USB disconnect, device number 11
>[ 7696.418069] usb 2-1.2: new high-speed USB device number 12 using ehci-pci
>[ 7696.509123] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7696.509130] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7696.509135] usb 2-1.2: Product: GT-I9100
>[ 7696.509140] usb 2-1.2: Manufacturer: samsung
>[ 7696.509145] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7696.516489] usb 2-1.2: USB disconnect, device number 12
>[ 7696.702062] usb 2-1.2: new high-speed USB device number 13 using ehci-pci
>[ 7697.192086] usb 2-1.2: device not accepting address 13, error -71
>[ 7697.684053] usb 2-1.2: new high-speed USB device number 14 using ehci-pci
>[ 7697.775089] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7697.775096] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7697.775102] usb 2-1.2: Product: GT-I9100
>[ 7697.775107] usb 2-1.2: Manufacturer: samsung
>[ 7697.775112] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7697.790505] usb 2-1.2: USB disconnect, device number 14
>[ 7697.980087] usb 2-1.2: new high-speed USB device number 15 using ehci-pci
>[ 7698.071082] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7698.071089] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7698.071095] usb 2-1.2: Product: GT-I9100
>[ 7698.071100] usb 2-1.2: Manufacturer: samsung
>[ 7698.071105] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7759.845102] usb 2-1.2: USB disconnect, device number 15
>[ 7760.044830] usb 2-1.2: new high-speed USB device number 16 using ehci-pci
>[ 7760.896312] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[ 7760.972036] usb 2-1.2: new high-speed USB device number 17 using ehci-pci
>[ 7761.824411] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[ 7761.824538] usb 2-1-port2: attempt power cycle
>[ 7762.628087] usb 2-1.2: new high-speed USB device number 18 using ehci-pci
>[ 7762.643367] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7762.643370] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7762.643372] usb 2-1.2: Product: GT-I9100
>[ 7762.643373] usb 2-1.2: Manufacturer: samsung
>[ 7762.643375] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7762.659624] usb 2-1.2: USB disconnect, device number 18
>[ 7762.844046] usb 2-1.2: new high-speed USB device number 19 using ehci-pci
>[ 7762.935386] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7762.935394] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7762.935400] usb 2-1.2: Product: GT-I9100
>[ 7762.935405] usb 2-1.2: Manufacturer: samsung
>[ 7762.935410] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7840.994804] usb 2-1.2: USB disconnect, device number 19
>[ 7841.188037] usb 2-1.2: new high-speed USB device number 20 using ehci-pci
>[ 7842.040288] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[ 7842.116058] usb 2-1.2: new high-speed USB device number 21 using ehci-pci
>[ 7842.608080] usb 2-1.2: device not accepting address 21, error -71
>[ 7842.608283] usb 2-1-port2: attempt power cycle
>[ 7843.412100] usb 2-1.2: new high-speed USB device number 22 using ehci-pci
>[ 7843.427736] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7843.427741] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7843.427743] usb 2-1.2: Product: GT-I9100
>[ 7843.427746] usb 2-1.2: Manufacturer: samsung
>[ 7843.427748] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 7843.435024] usb 2-1.2: USB disconnect, device number 22
>[ 7843.622083] usb 2-1.2: new high-speed USB device number 23 using ehci-pci
>[ 7843.713500] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 7843.713507] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 7843.713513] usb 2-1.2: Product: GT-I9100
>[ 7843.713518] usb 2-1.2: Manufacturer: samsung
>[ 7843.713523] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 8584.141971] usb 2-1.2: USB disconnect, device number 23
>[ 8584.331038] usb 2-1.2: new high-speed USB device number 24 using ehci-pci
>[ 8584.434206] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 8584.434209] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 8584.434210] usb 2-1.2: Product: GT-I9100
>[ 8584.434212] usb 2-1.2: Manufacturer: samsung
>[ 8584.434214] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 8584.908090] usb 2-1.2: reset high-speed USB device number 24 using ehci-pci
>[ 8585.933936] usb 2-1.2: USB disconnect, device number 24
>[ 8586.125039] usb 2-1.2: new high-speed USB device number 25 using ehci-pci
>[ 8586.216662] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[ 8586.216665] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[ 8586.216666] usb 2-1.2: Product: GT-I9100
>[ 8586.216668] usb 2-1.2: Manufacturer: samsung
>[ 8586.216670] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[ 8586.612104] usb 2-1.2: reset high-speed USB device number 25 using ehci-pci
>[ 9413.302539] sky2 0000:08:00.0 ens4: disabling interface
>[ 9415.031412] PM: suspend entry (deep)
>[ 9415.031415] PM: Syncing filesystems ... done.
>[ 9415.062717] Freezing user space processes ... (elapsed 0.004 seconds) done.
>[ 9415.067309] OOM killer disabled.
>[ 9415.067309] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 9415.068888] Suspending console(s) (use no_console_suspend to debug)
>[ 9415.080050] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 9415.081355] sd 0:0:0:0: [sda] Stopping disk
>[ 9415.137632] e1000e: EEE TX LPI TIMER: 00000000
>[ 9415.199404] PM: suspend devices took 0.131 seconds
>[ 9415.211385] ACPI: EC: interrupt blocked
>[ 9415.416423] ACPI: Preparing to enter system sleep state S3
>[ 9415.437106] ACPI: EC: event blocked
>[ 9415.437107] ACPI: EC: EC stopped
>[ 9415.437107] PM: Saving platform NVS memory
>[ 9415.437446] Disabling non-boot CPUs ...
>[ 9415.444901] smpboot: CPU 1 is now offline
>[ 9415.445071] ACPI: Low-level resume complete
>[ 9415.445071] ACPI: EC: EC started
>[ 9415.445071] PM: Restoring platform NVS memory
>[ 9415.450705] Enabling non-boot CPUs ...
>[ 9415.450756] x86: Booting SMP configuration:
>[ 9415.450757] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 9415.759121]  cache: parent cpu1 should not be sleeping
>[ 9415.878240] CPU1 is up
>[ 9415.880590] ACPI: Waking up from system sleep state S3
>[ 9415.906947] ACPI: EC: interrupt unblocked
>[ 9416.112980] usb usb3: root hub lost power or was reset
>[ 9416.113057] usb usb4: root hub lost power or was reset
>[ 9416.113110] usb usb5: root hub lost power or was reset
>[ 9416.113287] usb usb6: root hub lost power or was reset
>[ 9416.113347] usb usb7: root hub lost power or was reset
>[ 9416.113402] usb usb8: root hub lost power or was reset
>[ 9416.113558] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[ 9416.113571] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 9416.114697] sd 0:0:0:0: [sda] Starting disk
>[ 9416.124096] ACPI: EC: event unblocked
>[ 9416.429568] ata6: SATA link down (SStatus 0 SControl 300)
>[ 9416.429591] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 9416.429609] ata5: SATA link down (SStatus 0 SControl 300)
>[ 9416.429626] ata2: SATA link down (SStatus 0 SControl 300)
>[ 9416.430307] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 9416.431669] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 9416.432297] ata1.00: configured for UDMA/133
>[ 9416.434080] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[ 9416.435049] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 9416.672064] firewire_core 0000:0b:04.1: rediscovered device fw0
>[ 9416.922100] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[ 9416.922102] tpm tpm0: TPM is disabled/deactivated (0x7)
>[ 9418.546146] PM: resume devices took 2.434 seconds
>[ 9418.546193] OOM killer enabled.
>[ 9418.546194] Restarting tasks ... 
>[ 9418.561582] usb 2-1.2: USB disconnect, device number 25
>[ 9418.566319] done.
>[ 9418.575739] video LNXVIDEO:00: Restoring backlight state
>[ 9418.577063] video LNXVIDEO:01: Restoring backlight state
>[ 9418.578756] PM: suspend exit
>[ 9419.751680] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[ 9419.751694] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[ 9419.751834] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[ 9419.751841] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[ 9419.751850] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[ 9419.751860] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[ 9419.751869] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[ 9421.737481] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[ 9421.737544] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[ 9421.737566] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[ 9421.737638] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[ 9421.737788] pci 0000:08:00.0: supports D1 D2
>[ 9421.737793] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[ 9421.742225] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[ 9421.742238] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[ 9421.742389] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[ 9421.742398] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[ 9421.742421] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[ 9421.742437] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[ 9421.742442] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[ 9421.742451] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[ 9421.742461] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[ 9421.742470] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[ 9421.742882] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[ 9421.743983] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[ 9421.864149] e1000e: enp0s25 NIC Link is Down
>[ 9421.866663] sky2 0000:08:00.0 ens4: renamed from eth0
>[ 9421.872245] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[ 9422.072224] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[ 9422.073841] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[ 9422.085498] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[ 9422.088539] sky2 0000:08:00.0 ens4: enabling interface
>[ 9422.096523] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[ 9424.583671] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[ 9424.583671] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[10423.475065] sky2 0000:08:00.0 ens4: disabling interface
>[10425.215665] PM: suspend entry (deep)
>[10425.215668] PM: Syncing filesystems ... done.
>[10425.270363] Freezing user space processes ... (elapsed 0.004 seconds) done.
>[10425.275055] OOM killer disabled.
>[10425.275056] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[10425.276319] Suspending console(s) (use no_console_suspend to debug)
>[10425.286075] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[10425.287097] sd 0:0:0:0: [sda] Stopping disk
>[10425.346151] e1000e: EEE TX LPI TIMER: 00000000
>[10425.400287] PM: suspend devices took 0.124 seconds
>[10425.412397] ACPI: EC: interrupt blocked
>[10425.616417] ACPI: Preparing to enter system sleep state S3
>[10425.637400] ACPI: EC: event blocked
>[10425.637401] ACPI: EC: EC stopped
>[10425.637402] PM: Saving platform NVS memory
>[10425.637741] Disabling non-boot CPUs ...
>[10425.644891] smpboot: CPU 1 is now offline
>[10425.645042] ACPI: Low-level resume complete
>[10425.645042] ACPI: EC: EC started
>[10425.645042] PM: Restoring platform NVS memory
>[10425.650692] Enabling non-boot CPUs ...
>[10425.650743] x86: Booting SMP configuration:
>[10425.650744] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[10426.255742]  cache: parent cpu1 should not be sleeping
>[10426.400078] CPU1 is up
>[10426.402197] ACPI: Waking up from system sleep state S3
>[10426.428944] ACPI: EC: interrupt unblocked
>[10426.640980] usb usb3: root hub lost power or was reset
>[10426.641047] usb usb4: root hub lost power or was reset
>[10426.641099] usb usb5: root hub lost power or was reset
>[10426.641339] usb usb6: root hub lost power or was reset
>[10426.641392] usb usb7: root hub lost power or was reset
>[10426.641445] usb usb8: root hub lost power or was reset
>[10426.641583] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[10426.642943] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[10426.643525] sd 0:0:0:0: [sda] Starting disk
>[10426.652114] ACPI: EC: event unblocked
>[10426.957810] ata2: SATA link down (SStatus 0 SControl 300)
>[10426.957830] ata5: SATA link down (SStatus 0 SControl 300)
>[10426.957850] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[10426.957867] ata6: SATA link down (SStatus 0 SControl 300)
>[10426.958563] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[10426.959947] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[10426.960578] ata1.00: configured for UDMA/133
>[10426.962073] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[10426.963046] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[10427.200065] firewire_core 0000:0b:04.1: rediscovered device fw0
>[10427.451447] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[10427.451448] tpm tpm0: TPM is disabled/deactivated (0x7)
>[10427.592406] PM: resume devices took 0.952 seconds
>[10427.592455] OOM killer enabled.
>[10427.592456] Restarting tasks ... done.
>[10427.630394] video LNXVIDEO:00: Restoring backlight state
>[10427.631725] video LNXVIDEO:01: Restoring backlight state
>[10427.633030] PM: suspend exit
>[10428.697699] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[10428.697706] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[10428.697786] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[10428.697788] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[10428.697793] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[10428.697798] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[10428.697802] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[10431.071056] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[10431.071100] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[10431.071115] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[10431.071166] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[10431.071267] pci 0000:08:00.0: supports D1 D2
>[10431.071269] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[10431.074132] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[10431.074137] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[10431.074219] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[10431.074221] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[10431.074235] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[10431.074243] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[10431.074244] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[10431.074249] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[10431.074253] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[10431.074258] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[10431.074455] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[10431.074827] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[10431.086757] sky2 0000:08:00.0 ens4: renamed from eth0
>[10431.218287] e1000e: enp0s25 NIC Link is Down
>[10431.232638] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[10431.432203] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[10431.433550] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[10431.441931] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[10431.445670] sky2 0000:08:00.0 ens4: enabling interface
>[10431.448308] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[10433.929695] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[10433.929717] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[11073.103677] sky2 0000:08:00.0 ens4: disabling interface
>[11074.614803] PM: suspend entry (deep)
>[11074.614806] PM: Syncing filesystems ... done.
>[11074.661625] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[11074.664320] OOM killer disabled.
>[11074.664320] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[11074.665912] Suspending console(s) (use no_console_suspend to debug)
>[11074.677074] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[11074.677928] sd 0:0:0:0: [sda] Stopping disk
>[11074.735443] e1000e: EEE TX LPI TIMER: 00000000
>[11074.795031] PM: suspend devices took 0.130 seconds
>[11074.807398] ACPI: EC: interrupt blocked
>[11075.016420] ACPI: Preparing to enter system sleep state S3
>[11075.038432] ACPI: EC: event blocked
>[11075.038434] ACPI: EC: EC stopped
>[11075.038434] PM: Saving platform NVS memory
>[11075.038762] Disabling non-boot CPUs ...
>[11075.043905] smpboot: CPU 1 is now offline
>[11075.044087] ACPI: Low-level resume complete
>[11075.044087] ACPI: EC: EC started
>[11075.044087] PM: Restoring platform NVS memory
>[11075.049723] Enabling non-boot CPUs ...
>[11075.049774] x86: Booting SMP configuration:
>[11075.049775] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[11075.269739]  cache: parent cpu1 should not be sleeping
>[11075.381049] CPU1 is up
>[11075.383412] ACPI: Waking up from system sleep state S3
>[11075.410129] ACPI: EC: interrupt unblocked
>[11075.616990] usb usb3: root hub lost power or was reset
>[11075.617060] usb usb4: root hub lost power or was reset
>[11075.617113] usb usb5: root hub lost power or was reset
>[11075.617360] usb usb6: root hub lost power or was reset
>[11075.617416] usb usb7: root hub lost power or was reset
>[11075.617471] usb usb8: root hub lost power or was reset
>[11075.617603] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11075.618958] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[11075.619811] sd 0:0:0:0: [sda] Starting disk
>[11075.628098] ACPI: EC: event unblocked
>[11075.933804] ata2: SATA link down (SStatus 0 SControl 300)
>[11075.933825] ata6: SATA link down (SStatus 0 SControl 300)
>[11075.933845] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[11075.933861] ata5: SATA link down (SStatus 0 SControl 300)
>[11075.934563] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[11075.935909] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[11075.936564] ata1.00: configured for UDMA/133
>[11075.946053] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[11075.946066] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[11076.176066] firewire_core 0000:0b:04.1: rediscovered device fw0
>[11076.406244] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[11076.406245] tpm tpm0: TPM is disabled/deactivated (0x7)
>[11076.544400] PM: resume devices took 0.928 seconds
>[11076.544448] OOM killer enabled.
>[11076.544449] Restarting tasks ... done.
>[11076.594473] video LNXVIDEO:00: Restoring backlight state
>[11076.595839] video LNXVIDEO:01: Restoring backlight state
>[11076.597127] PM: suspend exit
>[11077.734054] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[11077.734061] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[11077.734140] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[11077.734142] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[11077.734147] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[11077.734151] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[11077.734156] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[11079.726320] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[11079.726366] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[11079.726381] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[11079.726435] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[11079.726542] pci 0000:08:00.0: supports D1 D2
>[11079.726545] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[11079.729230] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[11079.729243] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[11079.729395] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[11079.729405] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[11079.729428] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[11079.729446] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[11079.729451] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[11079.729460] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[11079.729469] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[11079.729479] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[11079.729886] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[11079.734104] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[11079.854661] e1000e: enp0s25 NIC Link is Down
>[11079.857993] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[11080.056312] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[11080.059229] sky2 0000:08:00.0 ens4: renamed from eth0
>[11080.062769] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[11080.085876] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[11080.089123] sky2 0000:08:00.0 ens4: enabling interface
>[11080.095248] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[11082.573640] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[11082.573640] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[11785.891073] usb 2-1.2: new high-speed USB device number 26 using ehci-pci
>[11785.982483] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[11785.982490] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[11785.982496] usb 2-1.2: Product: GT-I9100
>[11785.982501] usb 2-1.2: Manufacturer: samsung
>[11785.982506] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[13082.822457] usb 2-1.2: USB disconnect, device number 26
>[16045.803092] tun: Universal TUN/TAP device driver, 1.6
>[16657.813275] sky2 0000:08:00.0 ens4: disabling interface
>[16659.568688] PM: suspend entry (deep)
>[16659.568692] PM: Syncing filesystems ... done.
>[16659.601321] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[16659.604307] OOM killer disabled.
>[16659.604308] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[16659.605945] Suspending console(s) (use no_console_suspend to debug)
>[16659.614075] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[16659.614983] sd 0:0:0:0: [sda] Stopping disk
>[16659.675419] e1000e: EEE TX LPI TIMER: 00000000
>[16659.733791] PM: suspend devices took 0.128 seconds
>[16659.746408] ACPI: EC: interrupt blocked
>[16659.952430] ACPI: Preparing to enter system sleep state S3
>[16659.974611] ACPI: EC: event blocked
>[16659.974612] ACPI: EC: EC stopped
>[16659.974612] PM: Saving platform NVS memory
>[16659.974951] Disabling non-boot CPUs ...
>[16659.981885] smpboot: CPU 1 is now offline
>[16659.982008] ACPI: Low-level resume complete
>[16659.982008] ACPI: EC: EC started
>[16659.982008] PM: Restoring platform NVS memory
>[16659.987739] Enabling non-boot CPUs ...
>[16659.987789] x86: Booting SMP configuration:
>[16659.987790] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[16660.201905]  cache: parent cpu1 should not be sleeping
>[16660.309109] CPU1 is up
>[16660.311674] ACPI: Waking up from system sleep state S3
>[16660.338867] ACPI: EC: interrupt unblocked
>[16660.544987] usb usb3: root hub lost power or was reset
>[16660.545060] usb usb4: root hub lost power or was reset
>[16660.545112] usb usb5: root hub lost power or was reset
>[16660.545289] usb usb6: root hub lost power or was reset
>[16660.545345] usb usb7: root hub lost power or was reset
>[16660.545400] usb usb8: root hub lost power or was reset
>[16660.545555] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[16660.545563] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16660.546627] sd 0:0:0:0: [sda] Starting disk
>[16660.556099] ACPI: EC: event unblocked
>[16660.861422] ata2: SATA link down (SStatus 0 SControl 300)
>[16660.861444] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[16660.861462] ata5: SATA link down (SStatus 0 SControl 300)
>[16660.861479] ata6: SATA link down (SStatus 0 SControl 300)
>[16660.862152] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[16660.863500] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[16660.864131] ata1.00: configured for UDMA/133
>[16660.866056] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[16660.866073] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[16661.104056] firewire_core 0000:0b:04.1: rediscovered device fw0
>[16661.337281] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[16661.337282] tpm tpm0: TPM is disabled/deactivated (0x7)
>[16661.472419] PM: resume devices took 0.928 seconds
>[16661.472467] OOM killer enabled.
>[16661.472467] Restarting tasks ... done.
>[16661.519232] video LNXVIDEO:00: Restoring backlight state
>[16661.520557] video LNXVIDEO:01: Restoring backlight state
>[16661.521874] PM: suspend exit
>[16662.558377] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[16662.558391] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[16662.558535] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[16662.558542] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[16662.558551] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[16662.558561] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[16662.558570] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[16664.539173] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[16664.539235] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[16664.539257] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[16664.539328] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[16664.539480] pci 0000:08:00.0: supports D1 D2
>[16664.539485] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[16664.543527] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[16664.543535] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[16664.543636] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[16664.543641] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[16664.543658] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[16664.543669] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[16664.543671] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[16664.543677] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[16664.543682] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[16664.543688] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[16664.543934] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[16664.550023] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[16664.668287] e1000e: enp0s25 NIC Link is Down
>[16664.670965] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[16664.872349] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[16664.874369] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[16664.878485] sky2 0000:08:00.0 ens4: renamed from eth0
>[16664.904652] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[16664.907691] sky2 0000:08:00.0 ens4: enabling interface
>[16664.907851] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[16667.360471] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[16667.360471] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[19825.697019] usb 2-1.2: new high-speed USB device number 27 using ehci-pci
>[19825.787998] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[19825.788000] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[19825.788014] usb 2-1.2: Product: GT-I9100
>[19825.788015] usb 2-1.2: Manufacturer: samsung
>[19825.788017] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[20003.758033] usb 2-1.2: reset high-speed USB device number 27 using ehci-pci
>[20003.940841] usb 2-1.2: USB disconnect, device number 27
>[20004.136028] usb 2-1.2: new high-speed USB device number 28 using ehci-pci
>[20004.227078] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[20004.227081] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[20004.227083] usb 2-1.2: Product: GT-I9100
>[20004.227084] usb 2-1.2: Manufacturer: samsung
>[20004.227086] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[20026.250041] sky2 0000:08:00.0 ens4: disabling interface
>[20027.492048] usb 2-1.2: USB disconnect, device number 28
>[20027.766929] PM: suspend entry (deep)
>[20027.766932] PM: Syncing filesystems ... done.
>[20028.039528] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[20028.042242] OOM killer disabled.
>[20028.042243] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[20028.043340] Suspending console(s) (use no_console_suspend to debug)
>[20028.050055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[20028.051089] sd 0:0:0:0: [sda] Stopping disk
>[20028.112685] e1000e: EEE TX LPI TIMER: 00000000
>[20028.353701] PM: suspend devices took 0.310 seconds
>[20028.366424] ACPI: EC: interrupt blocked
>[20028.568412] ACPI: Preparing to enter system sleep state S3
>[20028.590447] ACPI: EC: event blocked
>[20028.590448] ACPI: EC: EC stopped
>[20028.590449] PM: Saving platform NVS memory
>[20028.590786] Disabling non-boot CPUs ...
>[20028.597565] smpboot: CPU 1 is now offline
>[20028.597607] ACPI: Low-level resume complete
>[20028.597607] ACPI: EC: EC started
>[20028.597607] PM: Restoring platform NVS memory
>[20028.603408] Enabling non-boot CPUs ...
>[20028.603459] x86: Booting SMP configuration:
>[20028.603460] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[20029.066756]  cache: parent cpu1 should not be sleeping
>[20029.280074] CPU1 is up
>[20029.282164] ACPI: Waking up from system sleep state S3
>[20029.309949] ACPI: EC: interrupt unblocked
>[20029.520978] usb usb3: root hub lost power or was reset
>[20029.521050] usb usb4: root hub lost power or was reset
>[20029.521103] usb usb5: root hub lost power or was reset
>[20029.521271] usb usb6: root hub lost power or was reset
>[20029.521326] usb usb7: root hub lost power or was reset
>[20029.521380] usb usb8: root hub lost power or was reset
>[20029.521513] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[20029.522933] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[20029.523843] sd 0:0:0:0: [sda] Starting disk
>[20029.532094] ACPI: EC: event unblocked
>[20029.837805] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[20029.837826] ata5: SATA link down (SStatus 0 SControl 300)
>[20029.837845] ata6: SATA link down (SStatus 0 SControl 300)
>[20029.837859] ata2: SATA link down (SStatus 0 SControl 300)
>[20029.838512] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20029.839848] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20029.840502] ata1.00: configured for UDMA/133
>[20029.850063] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[20029.850065] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[20030.080066] firewire_core 0000:0b:04.1: rediscovered device fw0
>[20030.306738] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[20030.306740] tpm tpm0: TPM is disabled/deactivated (0x7)
>[20030.448460] PM: resume devices took 0.928 seconds
>[20030.448743] OOM killer enabled.
>[20030.448744] Restarting tasks ... done.
>[20030.515087] video LNXVIDEO:00: Restoring backlight state
>[20030.516590] video LNXVIDEO:01: Restoring backlight state
>[20030.517949] PM: suspend exit
>[20031.602973] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[20031.602980] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[20031.603086] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[20031.603089] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[20031.603093] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[20031.603098] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[20031.603103] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[20033.598362] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[20033.598409] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[20033.598425] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[20033.598478] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[20033.598586] pci 0000:08:00.0: supports D1 D2
>[20033.598588] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[20033.602442] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[20033.602450] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[20033.602547] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[20033.602552] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[20033.602567] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[20033.602577] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[20033.602580] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[20033.602586] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[20033.602591] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[20033.602597] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[20033.602842] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[20033.603370] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[20033.723374] e1000e: enp0s25 NIC Link is Down
>[20033.723597] sky2 0000:08:00.0 ens4: renamed from eth0
>[20033.731251] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[20033.936257] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[20033.939408] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[20033.948997] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[20033.953666] sky2 0000:08:00.0 ens4: enabling interface
>[20033.954789] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[20036.438319] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[20036.438328] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[20771.081144] sky2 0000:08:00.0 ens4: disabling interface
>[20776.098973] PM: suspend entry (deep)
>[20776.098976] PM: Syncing filesystems ... done.
>[20776.133802] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[20776.136609] OOM killer disabled.
>[20776.136610] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[20776.138194] Suspending console(s) (use no_console_suspend to debug)
>[20776.143062] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[20776.143911] sd 0:0:0:0: [sda] Stopping disk
>[20776.207880] e1000e: EEE TX LPI TIMER: 00000000
>[20776.258695] PM: suspend devices took 0.120 seconds
>[20776.271396] ACPI: EC: interrupt blocked
>[20776.480411] ACPI: Preparing to enter system sleep state S3
>[20776.502800] ACPI: EC: event blocked
>[20776.502801] ACPI: EC: EC stopped
>[20776.502801] PM: Saving platform NVS memory
>[20776.503148] Disabling non-boot CPUs ...
>[20776.510902] smpboot: CPU 1 is now offline
>[20776.511106] ACPI: Low-level resume complete
>[20776.511106] ACPI: EC: EC started
>[20776.511106] PM: Restoring platform NVS memory
>[20776.516758] Enabling non-boot CPUs ...
>[20776.516808] x86: Booting SMP configuration:
>[20776.516809] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[20776.764152]  cache: parent cpu1 should not be sleeping
>[20776.868603] CPU1 is up
>[20776.873711] ACPI: Waking up from system sleep state S3
>[20776.901988] ACPI: EC: interrupt unblocked
>[20777.113050] usb usb3: root hub lost power or was reset
>[20777.113110] usb usb4: root hub lost power or was reset
>[20777.113163] usb usb5: root hub lost power or was reset
>[20777.113414] usb usb6: root hub lost power or was reset
>[20777.113468] usb usb7: root hub lost power or was reset
>[20777.113521] usb usb8: root hub lost power or was reset
>[20777.113658] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[20777.114998] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[20777.116729] sd 0:0:0:0: [sda] Starting disk
>[20777.125105] ACPI: EC: event unblocked
>[20777.429796] ata6: SATA link down (SStatus 0 SControl 300)
>[20777.429817] ata2: SATA link down (SStatus 0 SControl 300)
>[20777.429834] ata5: SATA link down (SStatus 0 SControl 300)
>[20777.429852] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[20777.430577] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20777.431924] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20777.432545] ata1.00: configured for UDMA/133
>[20777.442055] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[20777.443052] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[20777.672055] firewire_core 0000:0b:04.1: rediscovered device fw0
>[20777.903635] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[20777.903637] tpm tpm0: TPM is disabled/deactivated (0x7)
>[20778.040406] PM: resume devices took 0.928 seconds
>[20778.040453] OOM killer enabled.
>[20778.040454] Restarting tasks ... done.
>[20778.054432] video LNXVIDEO:00: Restoring backlight state
>[20778.055800] video LNXVIDEO:01: Restoring backlight state
>[20778.057128] PM: suspend exit
>[20779.122207] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[20779.122215] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[20779.122304] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[20779.122308] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[20779.122313] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[20779.122319] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[20779.122325] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[20781.095337] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[20781.095383] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[20781.095399] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[20781.095452] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[20781.095559] pci 0000:08:00.0: supports D1 D2
>[20781.095561] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[20781.099721] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[20781.099729] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[20781.099827] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[20781.099831] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[20781.099848] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[20781.099859] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[20781.099861] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[20781.099867] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[20781.099873] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[20781.099879] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[20781.100127] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[20781.100621] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[20781.219285] e1000e: enp0s25 NIC Link is Down
>[20781.222491] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[20781.416422] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[20781.419146] sky2 0000:08:00.0 ens4: renamed from eth0
>[20781.427857] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[20781.459418] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[20781.462449] sky2 0000:08:00.0 ens4: enabling interface
>[20781.471338] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[20783.921356] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[20783.921360] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[22086.453780] sky2 0000:08:00.0 ens4: disabling interface
>[22088.211204] PM: suspend entry (deep)
>[22088.211206] PM: Syncing filesystems ... done.
>[22088.233597] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[22088.236412] OOM killer disabled.
>[22088.236412] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[22088.238071] Suspending console(s) (use no_console_suspend to debug)
>[22088.244065] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[22088.244849] sd 0:0:0:0: [sda] Stopping disk
>[22088.307818] e1000e: EEE TX LPI TIMER: 00000000
>[22088.358934] PM: suspend devices took 0.120 seconds
>[22088.371401] ACPI: EC: interrupt blocked
>[22088.576422] ACPI: Preparing to enter system sleep state S3
>[22088.599655] ACPI: EC: event blocked
>[22088.599656] ACPI: EC: EC stopped
>[22088.599656] PM: Saving platform NVS memory
>[22088.599993] Disabling non-boot CPUs ...
>[22088.607896] smpboot: CPU 1 is now offline
>[22088.608017] ACPI: Low-level resume complete
>[22088.608017] ACPI: EC: EC started
>[22088.608017] PM: Restoring platform NVS memory
>[22088.613751] Enabling non-boot CPUs ...
>[22088.613801] x86: Booting SMP configuration:
>[22088.613802] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[22088.820881]  cache: parent cpu1 should not be sleeping
>[22088.928111] CPU1 is up
>[22088.930618] ACPI: Waking up from system sleep state S3
>[22088.958843] ACPI: EC: interrupt unblocked
>[22089.169051] usb usb3: root hub lost power or was reset
>[22089.169112] usb usb4: root hub lost power or was reset
>[22089.169164] usb usb5: root hub lost power or was reset
>[22089.169416] usb usb6: root hub lost power or was reset
>[22089.169471] usb usb7: root hub lost power or was reset
>[22089.169525] usb usb8: root hub lost power or was reset
>[22089.169783] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[22089.171037] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[22089.172669] sd 0:0:0:0: [sda] Starting disk
>[22089.181113] ACPI: EC: event unblocked
>[22089.485794] ata5: SATA link down (SStatus 0 SControl 300)
>[22089.485816] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[22089.485834] ata2: SATA link down (SStatus 0 SControl 300)
>[22089.485850] ata6: SATA link down (SStatus 0 SControl 300)
>[22089.486541] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22089.487883] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22089.488519] ata1.00: configured for UDMA/133
>[22089.498067] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[22089.498074] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[22089.728065] firewire_core 0000:0b:04.1: rediscovered device fw0
>[22089.975779] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[22089.975781] tpm tpm0: TPM is disabled/deactivated (0x7)
>[22090.112454] PM: resume devices took 0.944 seconds
>[22090.112745] OOM killer enabled.
>[22090.112746] Restarting tasks ... done.
>[22090.159422] video LNXVIDEO:00: Restoring backlight state
>[22090.162096] video LNXVIDEO:01: Restoring backlight state
>[22090.163491] PM: suspend exit
>[22091.229741] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22091.229749] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22091.229838] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22091.229842] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22091.229847] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22091.229853] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22091.229859] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22093.200945] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[22093.200988] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[22093.201017] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[22093.201066] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[22093.201163] pci 0000:08:00.0: supports D1 D2
>[22093.201165] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[22093.204380] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22093.204386] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22093.204468] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[22093.204471] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[22093.204485] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[22093.204493] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22093.204495] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22093.204499] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22093.204503] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22093.204508] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22093.204701] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[22093.206311] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[22093.325316] e1000e: enp0s25 NIC Link is Down
>[22093.325444] sky2 0000:08:00.0 ens4: renamed from eth0
>[22093.332029] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22093.520369] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22093.527257] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[22093.536182] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22093.539229] sky2 0000:08:00.0 ens4: enabling interface
>[22093.550171] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22096.028999] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[22096.028999] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[22201.464083] sky2 0000:08:00.0 ens4: disabling interface
>[22202.920408] PM: suspend entry (deep)
>[22202.920410] PM: Syncing filesystems ... done.
>[22202.944374] Freezing user space processes ... (elapsed 0.004 seconds) done.
>[22202.949381] OOM killer disabled.
>[22202.949382] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[22202.951066] Suspending console(s) (use no_console_suspend to debug)
>[22202.957075] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[22202.957859] sd 0:0:0:0: [sda] Stopping disk
>[22203.020518] e1000e: EEE TX LPI TIMER: 00000000
>[22203.265705] PM: suspend devices took 0.314 seconds
>[22203.278378] ACPI: EC: interrupt blocked
>[22203.480413] ACPI: Preparing to enter system sleep state S3
>[22203.504124] ACPI: EC: event blocked
>[22203.504125] ACPI: EC: EC stopped
>[22203.504126] PM: Saving platform NVS memory
>[22203.504463] Disabling non-boot CPUs ...
>[22203.512215] smpboot: CPU 1 is now offline
>[22203.512365] ACPI: Low-level resume complete
>[22203.512365] ACPI: EC: EC started
>[22203.512365] PM: Restoring platform NVS memory
>[22203.518035] Enabling non-boot CPUs ...
>[22203.518085] x86: Booting SMP configuration:
>[22203.518086] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[22204.134087]  cache: parent cpu1 should not be sleeping
>[22204.232247] CPU1 is up
>[22204.234546] ACPI: Waking up from system sleep state S3
>[22204.263146] ACPI: EC: interrupt unblocked
>[22204.473160] usb usb3: root hub lost power or was reset
>[22204.473216] usb usb4: root hub lost power or was reset
>[22204.473267] usb usb5: root hub lost power or was reset
>[22204.473437] usb usb6: root hub lost power or was reset
>[22204.473491] usb usb7: root hub lost power or was reset
>[22204.473543] usb usb8: root hub lost power or was reset
>[22204.473682] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[22204.475042] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[22204.475458] sd 0:0:0:0: [sda] Starting disk
>[22204.486122] ACPI: EC: event unblocked
>[22204.789786] ata6: SATA link down (SStatus 0 SControl 300)
>[22204.789807] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[22204.789824] ata2: SATA link down (SStatus 0 SControl 300)
>[22204.789841] ata5: SATA link down (SStatus 0 SControl 300)
>[22204.790530] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22204.791892] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22204.792560] ata1.00: configured for UDMA/133
>[22204.802052] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[22204.802069] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[22205.032065] firewire_core 0000:0b:04.1: rediscovered device fw0
>[22205.275992] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[22205.275994] tpm tpm0: TPM is disabled/deactivated (0x7)
>[22205.416448] PM: resume devices took 0.944 seconds
>[22205.416737] OOM killer enabled.
>[22205.416738] Restarting tasks ... done.
>[22205.450223] video LNXVIDEO:00: Restoring backlight state
>[22205.451598] video LNXVIDEO:01: Restoring backlight state
>[22205.452881] PM: suspend exit
>[22206.545985] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22206.545993] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22206.546115] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22206.546118] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22206.546124] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22206.546130] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22206.546136] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22208.786930] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[22208.786977] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[22208.786992] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[22208.787085] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[22208.787198] pci 0000:08:00.0: supports D1 D2
>[22208.787201] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[22208.790174] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22208.790182] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22208.790284] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[22208.790288] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[22208.790304] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[22208.790314] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22208.790317] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22208.790322] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22208.790328] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22208.790333] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22208.790585] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[22208.791142] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[22208.913385] e1000e: enp0s25 NIC Link is Down
>[22208.915622] sky2 0000:08:00.0 ens4: renamed from eth0
>[22208.933176] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22209.136232] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22209.137975] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[22209.149532] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22209.152575] sky2 0000:08:00.0 ens4: enabling interface
>[22209.162448] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22211.623926] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[22211.623926] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[22512.909824] sky2 0000:08:00.0 ens4: disabling interface
>[22514.740639] PM: suspend entry (deep)
>[22514.740641] PM: Syncing filesystems ... done.
>[22514.768759] Freezing user space processes ... (elapsed 0.004 seconds) done.
>[22514.773393] OOM killer disabled.
>[22514.773394] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[22514.775069] Suspending console(s) (use no_console_suspend to debug)
>[22514.782061] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[22514.782943] sd 0:0:0:0: [sda] Stopping disk
>[22514.844964] e1000e: EEE TX LPI TIMER: 00000000
>[22514.891892] PM: suspend devices took 0.116 seconds
>[22514.904401] ACPI: EC: interrupt blocked
>[22515.112418] ACPI: Preparing to enter system sleep state S3
>[22515.136481] ACPI: EC: event blocked
>[22515.136482] ACPI: EC: EC stopped
>[22515.136483] PM: Saving platform NVS memory
>[22515.136823] Disabling non-boot CPUs ...
>[22515.143891] smpboot: CPU 1 is now offline
>[22515.144043] ACPI: Low-level resume complete
>[22515.144043] ACPI: EC: EC started
>[22515.144043] PM: Restoring platform NVS memory
>[22515.149709] Enabling non-boot CPUs ...
>[22515.149758] x86: Booting SMP configuration:
>[22515.149759] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[22515.854004]  cache: parent cpu1 should not be sleeping
>[22516.000069] CPU1 is up
>[22516.002625] ACPI: Waking up from system sleep state S3
>[22516.032001] ACPI: EC: interrupt unblocked
>[22516.241002] usb usb3: root hub lost power or was reset
>[22516.241069] usb usb4: root hub lost power or was reset
>[22516.241122] usb usb5: root hub lost power or was reset
>[22516.241300] usb usb6: root hub lost power or was reset
>[22516.241360] usb usb7: root hub lost power or was reset
>[22516.241414] usb usb8: root hub lost power or was reset
>[22516.241569] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[22516.241583] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[22516.242611] sd 0:0:0:0: [sda] Starting disk
>[22516.252085] ACPI: EC: event unblocked
>[22516.557755] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[22516.557775] ata2: SATA link down (SStatus 0 SControl 300)
>[22516.557793] ata6: SATA link down (SStatus 0 SControl 300)
>[22516.557809] ata5: SATA link down (SStatus 0 SControl 300)
>[22516.558460] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22516.559796] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22516.560461] ata1.00: configured for UDMA/133
>[22516.562063] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[22516.563049] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[22516.800066] firewire_core 0000:0b:04.1: rediscovered device fw0
>[22517.026674] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[22517.026676] tpm tpm0: TPM is disabled/deactivated (0x7)
>[22517.168404] PM: resume devices took 0.928 seconds
>[22517.168450] OOM killer enabled.
>[22517.168450] Restarting tasks ... done.
>[22517.202115] video LNXVIDEO:00: Restoring backlight state
>[22517.203462] video LNXVIDEO:01: Restoring backlight state
>[22517.204837] PM: suspend exit
>[22518.318937] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22518.318944] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22518.319043] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22518.319045] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22518.319050] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22518.319055] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22518.319059] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22520.397312] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[22520.397375] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[22520.397398] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[22520.397469] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[22520.397619] pci 0000:08:00.0: supports D1 D2
>[22520.397625] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[22520.401925] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[22520.401932] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[22520.402042] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[22520.402045] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[22520.402061] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[22520.402070] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[22520.402072] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[22520.402077] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[22520.402082] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[22520.402087] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[22520.402301] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[22520.405353] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[22520.529408] e1000e: enp0s25 NIC Link is Down
>[22520.532020] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22520.728209] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[22520.729780] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[22520.735896] sky2 0000:08:00.0 ens4: renamed from eth0
>[22520.764530] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22520.767560] sky2 0000:08:00.0 ens4: enabling interface
>[22520.770170] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[22523.256409] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[22523.256427] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[23215.884047] sky2 0000:08:00.0 ens4: disabling interface
>[23217.283316] PM: suspend entry (deep)
>[23217.283319] PM: Syncing filesystems ... done.
>[23217.319877] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[23217.322707] OOM killer disabled.
>[23217.322708] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[23217.324342] Suspending console(s) (use no_console_suspend to debug)
>[23217.334060] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[23217.334933] sd 0:0:0:0: [sda] Stopping disk
>[23217.394192] e1000e: EEE TX LPI TIMER: 00000000
>[23217.446460] PM: suspend devices took 0.122 seconds
>[23217.458388] ACPI: EC: interrupt blocked
>[23217.664421] ACPI: Preparing to enter system sleep state S3
>[23217.688471] ACPI: EC: event blocked
>[23217.688472] ACPI: EC: EC stopped
>[23217.688472] PM: Saving platform NVS memory
>[23217.688814] Disabling non-boot CPUs ...
>[23217.695898] smpboot: CPU 1 is now offline
>[23217.696007] ACPI: Low-level resume complete
>[23217.696007] ACPI: EC: EC started
>[23217.696007] PM: Restoring platform NVS memory
>[23217.701740] Enabling non-boot CPUs ...
>[23217.701790] x86: Booting SMP configuration:
>[23217.701791] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[23218.162022]  cache: parent cpu1 should not be sleeping
>[23218.274050] CPU1 is up
>[23218.276542] ACPI: Waking up from system sleep state S3
>[23218.306272] ACPI: EC: interrupt unblocked
>[23218.512993] usb usb3: root hub lost power or was reset
>[23218.513063] usb usb4: root hub lost power or was reset
>[23218.513116] usb usb5: root hub lost power or was reset
>[23218.513293] usb usb6: root hub lost power or was reset
>[23218.513353] usb usb7: root hub lost power or was reset
>[23218.513408] usb usb8: root hub lost power or was reset
>[23218.513561] iwlwifi 0000:06:00.0: RF_KILL bit toggled to disable radio.
>[23218.513574] sdhci-pci 0000:0b:04.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[23218.514627] sd 0:0:0:0: [sda] Starting disk
>[23218.524090] ACPI: EC: event unblocked
>[23218.829729] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[23218.829749] ata6: SATA link down (SStatus 0 SControl 300)
>[23218.829769] ata2: SATA link down (SStatus 0 SControl 300)
>[23218.829785] ata5: SATA link down (SStatus 0 SControl 300)
>[23218.830440] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[23218.831793] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[23218.832428] ata1.00: configured for UDMA/133
>[23218.834055] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[23218.834064] usb 8-2: reset full-speed USB device number 2 using uhci_hcd
>[23219.072065] firewire_core 0000:0b:04.1: rediscovered device fw0
>[23219.303567] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[23219.303569] tpm tpm0: TPM is disabled/deactivated (0x7)
>[23219.440403] PM: resume devices took 0.928 seconds
>[23219.440451] OOM killer enabled.
>[23219.440452] Restarting tasks ... done.
>[23219.484404] video LNXVIDEO:00: Restoring backlight state
>[23219.485810] video LNXVIDEO:01: Restoring backlight state
>[23219.487146] PM: suspend exit
>[23220.528657] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[23220.528664] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[23220.528749] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[23220.528752] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[23220.528756] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[23220.528761] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[23220.528765] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[23222.534135] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[23222.534200] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[23222.534223] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[23222.534295] pci 0000:08:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[23222.534454] pci 0000:08:00.0: supports D1 D2
>[23222.534459] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[23222.539845] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[23222.539852] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[23222.539942] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[23222.539946] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[23222.539960] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[23222.539969] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[23222.539971] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[23222.539976] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[23222.539981] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[23222.539986] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[23222.540230] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[23222.541196] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[23222.676323] e1000e: enp0s25 NIC Link is Down
>[23222.677946] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[23222.679250] sky2 0000:08:00.0 ens4: renamed from eth0
>[23222.888219] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[23222.895916] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
>[23222.911477] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[23222.914539] sky2 0000:08:00.0 ens4: enabling interface
>[23222.917230] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[23225.686501] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[23225.686501] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[31001.204359] PK-Backend[29861]: segfault at 0 ip 00007fe0081612c4 sp 00007fdff3f559f8 error 4 in libdnf.so.1[7fe008141000+43000]
>[40966.239779] usb 2-2: USB disconnect, device number 3
>[40966.293376] usb 2-1: clear tt 1 (0060) error -71
>[40966.297625] usb 2-1: clear tt 1 (0040) error -71
>[40966.301850] usb 2-1-port4: cannot reset (err = -71)
>[40966.306086] usb 2-1-port4: cannot reset (err = -71)
>[40966.310375] usb 2-1-port4: cannot reset (err = -71)
>[40966.314620] usb 2-1-port4: cannot reset (err = -71)
>[40966.318872] usb 2-1-port4: cannot reset (err = -71)
>[40966.318880] usb 2-1-port4: Cannot enable. Maybe the USB cable is bad?
>[40966.323104] usb 2-1-port4: cannot disable (err = -71)
>[40966.327353] usb 2-1-port4: cannot reset (err = -71)
>[40966.331601] usb 2-1-port4: cannot reset (err = -71)
>[40966.335868] usb 2-1-port4: cannot reset (err = -71)
>[40966.340548] usb 2-1-port4: cannot reset (err = -71)
>[40966.344604] usb 2-1-port4: cannot reset (err = -71)
>[40966.344608] usb 2-1-port4: Cannot enable. Maybe the USB cable is bad?
>[40966.348850] usb 2-1-port4: cannot disable (err = -71)
>[40966.353090] usb 2-1-port3: cannot reset (err = -71)
>[40966.357370] usb 2-1-port3: cannot reset (err = -71)
>[40966.361623] usb 2-1-port3: cannot reset (err = -71)
>[40966.365872] usb 2-1-port3: cannot reset (err = -71)
>[40966.370088] usb 2-1-port3: cannot reset (err = -71)
>[40966.370091] usb 2-1-port3: Cannot enable. Maybe the USB cable is bad?
>[40966.421975] usb 2-1-port3: cannot disable (err = -71)
>[40966.426223] usb 2-1-port3: cannot reset (err = -71)
>[40966.430489] usb 2-1-port3: cannot reset (err = -71)
>[40966.434831] usb 2-1-port3: cannot reset (err = -71)
>[40966.438984] usb 2-1-port3: cannot reset (err = -71)
>[40966.443226] usb 2-1-port3: cannot reset (err = -71)
>[40966.443232] usb 2-1-port3: Cannot enable. Maybe the USB cable is bad?
>[40966.447471] usb 2-1-port3: cannot disable (err = -71)
>[40966.452148] usb 2-1-port4: cannot reset (err = -71)
>[40966.460023] usb 2-1-port4: cannot reset (err = -71)
>[40966.464084] usb 2-1-port4: cannot reset (err = -71)
>[40966.468334] usb 2-1-port4: cannot reset (err = -71)
>[40966.472600] usb 2-1-port4: cannot reset (err = -71)
>[40966.472604] usb 2-1-port4: Cannot enable. Maybe the USB cable is bad?
>[40966.476834] usb 2-1-port4: cannot disable (err = -71)
>[40966.481083] usb 2-1-port4: cannot reset (err = -71)
>[40966.485764] usb 2-1-port4: cannot reset (err = -71)
>[40966.489835] usb 2-1-port4: cannot reset (err = -71)
>[40966.494085] usb 2-1-port4: cannot reset (err = -71)
>[40966.498333] usb 2-1-port4: cannot reset (err = -71)
>[40966.498337] usb 2-1-port4: Cannot enable. Maybe the USB cable is bad?
>[40966.503397] usb 2-1-port4: cannot disable (err = -71)
>[40966.507983] usb 2-1-port4: cannot disable (err = -71)
>[40966.511707] usb 2-1-port3: cannot reset (err = -71)
>[40966.515967] hub 2-1:1.0: hub_ext_port_status failed (err = -71)
>[40966.520744] usb 2-1-port3: cannot reset (err = -71)
>[40966.523066] sky2 0000:08:00.0 ens4: disabling interface
>[40966.523092] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523098] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523101] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523104] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523108] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523110] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523114] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523116] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.523119] sky2 0000:08:00.0: ens4: phy I/O error
>[40966.525224] usb 2-1-port3: cannot reset (err = -71)
>[40966.526086] usb 2-1: USB disconnect, device number 2
>[40966.526089] usb 2-1.3: USB disconnect, device number 4
>[40966.529983] usb 2-1-port3: cannot reset (err = -71)
>[40966.534230] ACPI: \_SB_.DOCK: undocking
>[40966.540524] usb 2-1.4: USB disconnect, device number 6
>[40966.542240] Monitor-Mwait will be used to enter C-2 state
>[40966.542244] Monitor-Mwait will be used to enter C-3 state
>[40983.753107] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[40983.753279] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
>[42431.520234] e1000e: enp0s25 NIC Link is Down
>[42441.359985] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[46607.005182] e1000e: enp0s25 NIC Link is Down
>[46626.283053] usb 2-2: new high-speed USB device number 29 using ehci-pci
>[46626.411434] usb 2-2: New USB device found, idVendor=0409, idProduct=005a
>[46626.411438] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[46626.412619] hub 2-2:1.0: USB hub found
>[46626.412684] hub 2-2:1.0: 3 ports detected
>[46630.082053] usb 2-1: new high-speed USB device number 30 using ehci-pci
>[46630.220608] usb 2-1: New USB device found, idVendor=0bda, idProduct=5401
>[46630.220612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[46630.220613] usb 2-1: Product: USB3.0 Hub
>[46630.220615] usb 2-1: Manufacturer: Realtek
>[46630.222474] hub 2-1:1.0: USB hub found
>[46630.223740] hub 2-1:1.0: 4 ports detected
>[46630.509051] usb 2-1.3: new low-speed USB device number 31 using ehci-pci
>[46630.603262] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
>[46630.603269] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[46630.603274] usb 2-1.3: Product: Optical Mouse
>[46630.603279] usb 2-1.3: Manufacturer: Genius
>[46630.610146] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/0003:0458:003A.0004/input/input15
>[46630.610653] hid-generic 0003:0458:003A.0004: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.7-1.3/input0
>[46630.687076] usb 2-1.4: new low-speed USB device number 32 using ehci-pci
>[46630.783259] usb 2-1.4: New USB device found, idVendor=062a, idProduct=0201
>[46630.783267] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[46630.783273] usb 2-1.4: Product: USB-compliant keyboard
>[46630.792111] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.0/0003:062A:0201.0005/input/input16
>[46630.845049] hid-generic 0003:062A:0201.0005: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.7-1.4/input0
>[46630.851914] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.1/0003:062A:0201.0006/input/input17
>[46630.904663] hid-generic 0003:062A:0201.0006: input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.7-1.4/input1
>[46631.162186] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
>[46850.844003] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[46850.844102] pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
>[46850.844120] pci 0000:08:00.0: reg 0x18: [io  0x0000-0x00ff]
>[46850.844172] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[46850.844323] pci 0000:08:00.0: supports D1 D2
>[46850.844328] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[46850.848237] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[46850.848244] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[46850.848344] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[46850.848348] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[46850.848365] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[46850.848375] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[46850.848377] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[46850.848383] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[46850.848389] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[46850.848394] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[46850.848499] sky2 0000:08:00.0: enabling device (0000 -> 0003)
>[46850.848636] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[46850.849812] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[46850.888144] sky2 0000:08:00.0 ens4: renamed from eth0
>[46850.909771] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[46850.912835] sky2 0000:08:00.0 ens4: enabling interface
>[46850.913178] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[46852.277106] sky2 0000:08:00.0 ens4: disabling interface
>[46852.915187] pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
>[46852.915251] pci 0000:08:00.0: reg 0x10: [mem 0xeb820000-0xeb823fff 64bit]
>[46852.915273] pci 0000:08:00.0: reg 0x18: [io  0x4000-0x40ff]
>[46852.915345] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[46852.915494] pci 0000:08:00.0: supports D1 D2
>[46852.915500] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[46852.919834] pci_bus 0000:0c: busn_res: [bus 0c] end can not be updated to 0f
>[46852.919847] pci 0000:00:1e.0: bridge has subordinate 0c but max busn 0f
>[46852.919997] pci 0000:08:00.0: BAR 6: assigned [mem 0xeb800000-0xeb81ffff pref]
>[46852.920030] pci 0000:08:00.0: BAR 0: assigned [mem 0xeb820000-0xeb823fff 64bit]
>[46852.920054] pci 0000:08:00.0: BAR 2: assigned [io  0x4000-0x40ff]
>[46852.920072] yenta_cardbus 0000:0b:04.0: CardBus bridge to [bus 0c]
>[46852.920077] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3000-0x30ff]
>[46852.920086] yenta_cardbus 0000:0b:04.0:   bridge window [io  0x3400-0x34ff]
>[46852.920095] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>[46852.920104] yenta_cardbus 0000:0b:04.0:   bridge window [mem 0xf4000000-0xf7ffffff]
>[46852.920502] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
>[46852.921515] sky2 0000:08:00.0 eth0: addr 00:1a:80:d9:23:2b
>[46852.938197] sky2 0000:08:00.0 ens4: renamed from eth0
>[46852.971223] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[46852.974282] sky2 0000:08:00.0 ens4: enabling interface
>[46852.976040] IPv6: ADDRCONF(NETDEV_UP): ens4: link is not ready
>[46855.451075] sky2 0000:08:00.0 ens4: Link is up at 1000 Mbps, full duplex, flow control both
>[46855.451075] IPv6: ADDRCONF(NETDEV_CHANGE): ens4: link becomes ready
>[47438.012089] usb 2-1.2: new high-speed USB device number 33 using ehci-pci
>[47438.504079] usb 2-1.2: device not accepting address 33, error -71
>[47438.788058] usb 2-1.2: new high-speed USB device number 34 using ehci-pci
>[47438.879067] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
>[47438.879071] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[47438.879074] usb 2-1.2: Product: GT-I9100
>[47438.879077] usb 2-1.2: Manufacturer: samsung
>[47438.879079] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[47440.532071] usb 2-1.2: reset high-speed USB device number 34 using ehci-pci
>[47440.622281] usb 2-1.2: device firmware changed
>[47440.625898] usb 2-1.2: USB disconnect, device number 34
>[47440.706083] usb 2-1.2: new high-speed USB device number 35 using ehci-pci
>[47440.797033] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6864
>[47440.797040] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[47440.797045] usb 2-1.2: Product: GT-I9100
>[47440.797051] usb 2-1.2: Manufacturer: samsung
>[47440.797056] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[47440.850827] usbcore: registered new interface driver cdc_ether
>[47440.857205] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.7-1.2, RNDIS device, 1e:48:38:14:54:cd
>[47440.859114] usbcore: registered new interface driver rndis_host
>[47440.897731] rndis_host 2-1.2:1.0 enp0s29f7u1u2: renamed from usb0
>[47440.918314] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u1u2: link is not ready
>[47441.411638] usb 2-1.2: USB disconnect, device number 35
>[47441.413928] rndis_host 2-1.2:1.0 enp0s29f7u1u2: unregister 'rndis_host' usb-0000:00:1d.7-1.2, RNDIS device
>[47442.400355] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[47443.264295] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[47443.264420] usb 2-1-port2: attempt power cycle
>[47444.440422] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[47444.516071] usb 2-1.2: new high-speed USB device number 39 using ehci-pci
>[47444.936082] usb 2-1.2: device not accepting address 39, error -71
>[47444.936296] usb 2-1-port2: unable to enumerate USB device
>[47445.121077] usb 2-1.2: new high-speed USB device number 40 using ehci-pci
>[47445.984376] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[47446.060072] usb 2-1.2: new high-speed USB device number 41 using ehci-pci
>[47446.928349] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
>[47446.928475] usb 2-1-port2: attempt power cycle
>[47447.524078] usb 2-1.2: new high-speed USB device number 42 using ehci-pci
>[47447.539333] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6864
>[47447.539340] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[47447.539346] usb 2-1.2: Product: GT-I9100
>[47447.539351] usb 2-1.2: Manufacturer: samsung
>[47447.539356] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[47447.558310] rndis_host 2-1.2:1.0: RNDIS init failed, -71
>[47447.558325] rndis_host: probe of 2-1.2:1.0 failed with error -71
>[47447.568067] usb 2-1.2: USB disconnect, device number 42
>[47447.807062] usb 2-1.2: new high-speed USB device number 43 using ehci-pci
>[47447.898078] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6864
>[47447.898085] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[47447.898091] usb 2-1.2: Product: GT-I9100
>[47447.898096] usb 2-1.2: Manufacturer: samsung
>[47447.898101] usb 2-1.2: SerialNumber: 00192b6b5d085e
>[47447.905856] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.7-1.2, RNDIS device, 6a:3d:f4:84:8b:d3
>[47447.991545] rndis_host 2-1.2:1.0 enp0s29f7u1u2: renamed from usb0
>[47448.011498] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u1u2: link is not ready
>[47547.219295] sky2 0000:08:00.0 ens4: Link is down
>[47547.872048] ------------[ cut here ]------------
>[47547.872066] NETDEV WATCHDOG: enp0s29f7u1u2 (rndis_host): transmit queue 0 timed out
>[47547.872125] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:473 dev_watchdog+0x1f3/0x200
>[47547.872128] Modules linked in: rndis_host cdc_ether usbnet mii tun uas usb_storage usblp rfcomm nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables bnep sunrpc fuse coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support arc4 iwldvm tpm_infineon mac80211 irqbypass iwlwifi snd_hda_codec_hdmi btusb btrtl snd_hda_codec_realtek btbcm btintel snd_hda_codec_generic bluetooth snd_hda_intel wmi_bmof i2c_i801 snd_hda_codec
>[47547.872254]  cfg80211 joydev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_hda_core snd_hwdep r592 snd_seq videodev snd_seq_device snd_pcm memstick ecdh_generic media lpc_ich snd_timer snd soundcore shpchp sony_laptop rfkill tpm_tis tpm_tis_core tpm acpi_cpufreq binfmt_misc dm_crypt i915 nouveau ttm i2c_algo_bit drm_kms_helper sdhci_pci mxm_wmi drm cqhci firewire_ohci e1000e sdhci firewire_core serio_raw mmc_core yenta_socket crc_itu_t sky2 ptp pps_core wmi video
>[47547.872352] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.16.7-200.fc27.x86_64 #1
>[47547.872355] Hardware name: Sony Corporation VGN-Z55TG_B/VAIO, BIOS R5031M3 11/10/2009
>[47547.872362] RIP: 0010:dev_watchdog+0x1f3/0x200
>[47547.872365] RSP: 0018:ffff9472bfc03e78 EFLAGS: 00010286
>[47547.872370] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
>[47547.872373] RDX: 0000000000040400 RSI: 00000000000000f6 RDI: 0000000000000300
>[47547.872377] RBP: ffff9472b1b49478 R08: 0000000000000a15 R09: 0000000000000004
>[47547.872380] R10: ffff9472bfc03ed8 R11: 0000000000000001 R12: ffff9472b1b49000
>[47547.872383] R13: 0000000000000000 R14: ffff9472bfc03ec8 R15: 0000000000000000
>[47547.872388] FS:  0000000000000000(0000) GS:ffff9472bfc00000(0000) knlGS:0000000000000000
>[47547.872392] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[47547.872396] CR2: 00007fd5772b8000 CR3: 00000001bf8f2000 CR4: 00000000000406f0
>[47547.872399] Call Trace:
>[47547.872406]  <IRQ>
>[47547.872415]  ? pfifo_fast_init+0x130/0x130
>[47547.872423]  call_timer_fn+0x2b/0x120
>[47547.872430]  run_timer_softirq+0x3cc/0x420
>[47547.872438]  __do_softirq+0xe7/0x2cb
>[47547.872446]  irq_exit+0xeb/0xf0
>[47547.872451]  do_IRQ+0x7d/0xc0
>[47547.872459]  common_interrupt+0xf/0xf
>[47547.872462]  </IRQ>
>[47547.872469] RIP: 0010:cpuidle_enter_state+0xa0/0x2b0
>[47547.872473] RSP: 0018:ffffffff9d203e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffcf
>[47547.872479] RAX: ffff9472bfc20b40 RBX: 00002b3e9a058d08 RCX: 00002b3e9a058c4c
>[47547.872482] RDX: 00002b3e9a058d08 RSI: 00002b3e9a058d08 RDI: 0000000000000000
>[47547.872486] RBP: ffff9472b5e5d200 R08: 0000000000001e08 R09: 0000000000000039
>[47547.872489] R10: ffffffff9d203e50 R11: 00000000000008de R12: 0000000000000002
>[47547.872493] R13: ffffffff9d2d7978 R14: 0000000000000000 R15: 00002b3e9a031382
>[47547.872504]  do_idle+0x17b/0x1d0
>[47547.872510]  cpu_startup_entry+0x6f/0x80
>[47547.872519]  start_kernel+0x4e0/0x500
>[47547.872528]  secondary_startup_64+0xa5/0xb0
>[47547.872533] Code: 47 00 48 63 4d e8 eb 93 4c 89 e7 c6 05 dc 24 ba 00 01 e8 c1 2d fd ff 89 d9 48 89 c2 4c 89 e6 48 c7 c7 60 9c 14 9d e8 0d 64 91 ff <0f> 0b eb c0 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 41 57 41 
>[47547.872635] ---[ end trace c96358891fc2c81b ]---

Actions: View

Attachments on bug 1584278: 1445928