Attachment 144598 Details for Bug 213556 – dmesg output

dmesg output

dmesg6-TEST-v3FW.txt (text/plain), 21.80 KB, created by Julius Smith on 2007-01-01 01:59:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Julius Smith

Created: 2007-01-01 01:59:05 UTC

Size: 21.80 KB

patch

obsolete

>Linux version 2.6.18-1.2857.2.1.fc6.jwltest.14 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Tue Nov 21 15:08:26 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bf10000 (usable)
> BIOS-e820: 000000003bf10000 - 000000003bf19000 (ACPI data)
> BIOS-e820: 000000003bf19000 - 000000003bf80000 (ACPI NVS)
> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>63MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f8790
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 245520
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 16144 pages, LIFO batch:3
>DMI present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 HP                                    ) @ 0x000f87c0
>ACPI: RSDT (v001 HP     30B5     0x06040000  LTP 0x00000000) @ 0x3bf131f4
>ACPI: FADT (v001 HP     30B5     0x06040000 PTL_ 0x000f4240) @ 0x3bf18d52
>ACPI: MCFG (v001 HP     30B5     0x06040000  LTP 0x00000000) @ 0x3bf18dc6
>ACPI: MADT (v001 HP     30B5     0x06040000  LTP 0x00000000) @ 0x3bf18e02
>ACPI: BOOT (v001 HP     30B5     0x06040000  LTP 0x00000001) @ 0x3bf18e56
>ACPI: SSDT (v001 HP     30B5     0x06040000  LTP 0x00000001) @ 0x3bf18e7e
>ACPI: DSDT (v001 HP       30B5   0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Detected 1607.304 MHz processor.
>Built 1 zonelists.  Total pages: 245520
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07af000 soft=c078f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 966172k/982080k available (2139k kernel code, 15192k reserved, 866k data, 244k init, 64576k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3216.49 BogoMIPS (lpj=1608245)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Turion(tm) 64 X2  stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07b0000 soft=c0790000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3214.18 BogoMIPS (lpj=1607091)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Turion(tm) 64 X2  stepping 02
>Total of 2 processors activated (6430.67 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -1456 usecs TSC skew, fixed it up.
>CPU#1 had 1456 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>migration_cost=85
>checking if image is initramfs... it is
>Freeing initrd memory: 2244k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>PCI: No mmconfig possible on 3:9
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:05.0
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *10
>ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10
>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:03: ioport range 0x1400-0x147f has been reserved
>pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:03: ioport range 0x1800-0x187f has been reserved
>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:03: ioport range 0x3040-0x307f has been reserved
>pnp: 00:03: ioport range 0x3000-0x303f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: c3000000-c30fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: c8000000-c87fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: disabled.
>  MEM window: c3100000-c31fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1167586051.848:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 528E5B1545A675ED
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie03]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZS0] (50 C)
>ACPI: Thermal Zone [TZS1] (54 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
>NFORCE-MCP51: chipset revision 241
>NFORCE-MCP51: not 100% native mode: will probe irqs later
>NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
>    ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVDRAM GSA-4084N, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Turion(tm) 64 X2  processors (version 2.00.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 386k
>Time: acpi_pm clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 201, io mem 0xc0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 209, io mem 0xc0005000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:0e.0: version 2.0
>PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ata1: SATA max UDMA/133 cmd 0x30B0 ctl 0x30A6 bmdma 0x3090 irq 217
>ata2: SATA max UDMA/133 cmd 0x30A8 ctl 0x30A2 bmdma 0x3098 irq 217
>scsi0 : sata_nv
>input: AT Translated Set 2 keyboard as /class/input/input0
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x30AF
>  Vendor: ATA       Model: SAMSUNG HM120JI   Rev: YF10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1167586056.648:2): selinux=0 auid=4294967295
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ieee1394: Initialized config rom entry `ip1394'
>input: PC Speaker as /class/input/input3
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:03:09.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:03:09.1[B] -> Link [LNK2] -> GSI 20 (level, high) -> IRQ 225
>mmc0: SDHCI at 0xc3100800 irq 225 DMA
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNK1] -> GSI 19 (level, high) -> IRQ 233
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233]  MMIO=[c3100000-c31007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ieee80211_crypt: registered algorithm 'NULL'
>EDAC MC: Ver: 2.0.1 Nov 21 2006
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 18 (level, high) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>bcm43xx driver
>eth0: forcedeth.c: subsystem: 0103c:30b5 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 233
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>bcm43xx: Chip ID 0x4311, rev 0x1
>bcm43xx: Number of cores: 4
>bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243, enabled
>bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243, disabled
>bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243, disabled
>bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243, enabled
>bcm43xx: PHY connected
>bcm43xx: Detected PHY: Version: 4, Type 2, Revision 8
>bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
>bcm43xx: Radio turned off
>bcm43xx: Radio turned off
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 17 (level, high) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[06e40a0059615035]
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: AC Adapter [ADP1] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1966072k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1966072k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (7672 buckets, 61376 max) - 228 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate()
>SoftMAC: empty ratesinfo?
>SoftMAC: empty ratesinfo?
>bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Associate: failed to initiate scan. Is device up?
>bcm43xx: PHY connected
>bcm43xx: Microcode rev 0xef, pl 0xe (2003-07-10  18:59:06)
>bcm43xx: Radio turned on
>bcm43xx: Chip initialized
>bcm43xx: 32-bit DMA initialized
>bcm43xx: Keys cleared
>bcm43xx: Selected 802.11 core (phytype 2)
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Start scanning with channel: 1
>SoftMAC: Scanning 14 channels
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>SoftMAC: Scanning finished
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Start scanning with channel: 1
>SoftMAC: Scanning 14 channels
>SoftMAC: Unable to find matching network after scan!
>SoftMAC: Scanning finished
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Start scanning with channel: 1
>SoftMAC: Scanning 14 channels
>SoftMAC: Scanning finished
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Start scanning with channel: 1
>SoftMAC: Scanning 14 channels
>SoftMAC: Scanning finished
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Start scanning with channel: 1
>SoftMAC: Scanning 14 channels
>SoftMAC: Scanning finished
>SoftMAC: Unable to find matching network after scan!
>bcm43xx: Radio turned off
>bcm43xx: DMA-32 0x0200 (RX) max used slots: 0/64
>bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
>bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
>bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
>bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
>bcm43xx: DMA-32 0x0220 (TX) max used slots: 70/512
>bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>bcm43xx: IRQ_READY timeout
>bcm43xx: core_up for active 802.11 core failed (-19)
>bcm43xx: IRQ_READY timeout
>bcm43xx: core_up for active 802.11 core failed (-19)
>SoftMAC: Associate: Scanning for networks first.
>SoftMAC: Associate: failed to initiate scan. Is device up?
>bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bcm43xx: IRQ_READY timeout
>bcm43xx: core_up for active 802.11 core failed (-19)
>bcm43xx: IRQ_READY timeout
>bcm43xx: core_up for active 802.11 core failed (-19)

Actions: View

Attachments on bug 213556: 140181 | 140301 | 140468 | 140469 | 140527 | 142402 | 142403 | 142452 | 142453 | 144023 | 144598 | 144599