Attachment 144779 Details for Bug 213148 – syslog

syslog

syslog (text/plain), 21.05 KB, created by Peter Leinen on 2007-01-04 09:37:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Leinen

Created: 2007-01-04 09:37:41 UTC

Size: 21.05 KB

patch

obsolete

><5>Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
><4> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
><4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
><4> BIOS-e820: 000000003fee0000 - 000000003fee9000 (ACPI data)
><4> BIOS-e820: 000000003fee9000 - 000000003ff00000 (ACPI NVS)
><4> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
><5>126MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000f5f40
><4>Using x86 segment limits to approximate NX protection
><7>On node 0 totalpages: 261856
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 32480 pages, LIFO batch:7
><6>DMI present.
><6>Using APIC driver default
><6>Intel MultiProcessor Specification v1.4
><6>    Virtual Wire compatibility mode.
><6>OEM ID: INTEL    Product ID: MUKILTEO     APIC at: 0xFEE00000
><4>Processor #0 15:6 APIC version 20
><4>Processor #1 15:6 APIC version 20
><6>I/O APIC #2 Version 32 at 0xFEC00000.
><6>I/O APIC #3 Version 32 at 0xFEC10000.
><4>Enabling APIC mode:  Flat.  Using 2 I/O APICs
><6>Processors: 2
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
><4>Detected 3391.894 MHz processor.
><4>Built 1 zonelists.  Total pages: 261856
><5>Kernel command line: text skipddc nofirewire noparport irqmask=0x0e98 noaudio noapm noapic acpi=off nopcmcia network ks=nfs:136.199.199.46:/vol/gurt/VCR/Linux/FC6/Kickstart/ks.cfg ksdevice=eth0 load_ramdisk=1 initrd=initrd.img ramdisk_size=16384 BOOT_IMAGE=vmlinuz BOOTIF=01-0
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><7>mapped IOAPIC to ffffb000 (fec10000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>CPU 0 irqstacks, hard=c079f000 soft=c077f000
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1027540k/1047424k available (2105k kernel code, 19196k reserved, 844k data, 240k init, 129920k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 6789.21 BogoMIPS (lpj=13578420)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><6>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
><7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
><4>monitor/mwait feature present.
><4>using mwait in idle threads.
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 2048K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><7>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000e49d 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><4>CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 04
><6>SMP alternatives: switching to SMP code
><4>Booting processor 1/1 eip 3000
><4>CPU 1 irqstacks, hard=c07a0000 soft=c0780000
><6>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 6783.56 BogoMIPS (lpj=13567125)
><7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
><7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
><4>monitor/mwait feature present.
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 2048K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><7>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000e49d 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
><4>CPU1: Intel(R) Pentium(R) D CPU 3.40GHz stepping 04
><6>Total of 2 processors activated (13572.77 BogoMIPS).
><6>checking TSC synchronization across 2 CPUs: passed.
><6>Brought up 2 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=32 bytes
><7>sizeof(inode)=424 bytes
><7>sizeof(dentry)=148 bytes
><7>sizeof(ext3inode)=600 bytes
><7>sizeof(buffer_head)=52 bytes
><7>sizeof(skbuff)=172 bytes
><7>sizeof(task_struct)=1392 bytes
><4>migration_cost=1053
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5802k freed
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd877, last bus=10
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><4>PCI: PXH quirk detected, disabling MSI for SHPC device
><7>Boot video device is 0000:0a:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0
><7>PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0
><7>PCI: Cannot allocate resource region 9 of bridge 0000:00:01.0
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:02:00.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: e9100000-e91fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.4
><6>  IO window: 4000-4fff
><6>  MEM window: e9200000-e92fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.5
><6>  IO window: 5000-5fff
><6>  MEM window: e9300000-e93fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 6000-6fff
><6>  MEM window: e9400000-eeffffff
><6>  PREFETCH window: 50000000-500fffff
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1146906223.852:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><6>Initializing Cryptographic API
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EAA0802BFF323905
><4>  - key was been created 14117995 seconds in future
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.4:pcie00]
><7>Allocate Port Service[0000:00:1c.4:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.5:pcie00]
><7>Allocate Port Service[0000:00:1c.5:pcie02]
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>0000:04:00.3: ttyS2 at I/O 0x4020 (irq = 5) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH7: IDE controller at PCI slot 0000:00:1f.1
><6>ICH7: chipset revision 1
><6>ICH7: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:DMA, hdb:pio
><7>Probing IDE interface ide0...
><4>hda: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><4>ide-floppy driver 0.99.newide
><6>usbcore: registered new driver libusual
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 240k freed
><4>Write protecting the kernel read-only data: 370k
><6>Time: tsc clocksource has been installed.
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><6>input: PC Speaker as /class/input/input1
><6>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
><6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 5, io mem 0xe9000000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><6>USB Universal Host Controller Interface driver v3.0
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 5, io base 0x00003000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb 1-1: new high speed USB device using ehci_hcd and address 2
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00003020
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 5, io base 0x00003040
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 1-1: configuration #1 chosen from 1 choice
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.3: irq 10, io base 0x00003060
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><5>  Vendor: SanDisk   Model: Cruzer Micro      Rev: 0.1 
><5>  Type:   Direct-Access                      ANSI SCSI revision: 02
><5>SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><5>SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><6> sda: sda1 sda2
><5>sd 0:0:0:0: Attached scsi removable disk sda
><7>usb-storage: device scan complete
><6>usbcore: deregistering driver usb-storage
><6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
><6>Copyright (c) 1999-2006 Intel Corporation.
><7>PCI: Setting latency timer of device 0000:04:00.0 to 64
><6>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:5b:63:f8
><6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
><7>PCI: Setting latency timer of device 0000:05:00.0 to 64
><6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:5b:63:f9
><6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
><7>libata version 2.00 loaded.
><7>ata_piix 0000:00:1f.2: version 2.00
><6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ata1: SATA max UDMA/133 cmd 0x30E8 ctl 0x30DE bmdma 0x30B0 irq 10
><6>ata2: SATA max UDMA/133 cmd 0x30E0 ctl 0x30DA bmdma 0x30B8 irq 10
><6>scsi1 : ata_piix
><6>ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/1)
><6>ata1.00: ata1: dev 0 multi count 16
><6>ata1.00: configured for UDMA/133
><6>scsi2 : ata_piix
><6>ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/1)
><6>ata2.00: ata2: dev 0 multi count 16
><6>ata2.00: configured for UDMA/133
><5>  Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2 sda3 sda4
><5>sd 1:0:0:0: Attached scsi disk sda
><5>  Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb:
><5>sd 2:0:0:0: Attached scsi disk sdb
><6>Initializing USB Mass Storage driver...
><6>scsi3 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><6>usb 1-1: reset high speed USB device using ehci_hcd and address 2
><5>  Vendor: SanDisk   Model: Cruzer Micro      Rev: 0.1 
><5>  Type:   Direct-Access                      ANSI SCSI revision: 02
><5>SCSI device sdc: 2001888 512-byte hdwr sectors (1025 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 03 00 00 00
><3>sdc: assuming drive cache: write through
><5>SCSI device sdc: 2001888 512-byte hdwr sectors (1025 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 03 00 00 00
><3>sdc: assuming drive cache: write through
><6> sdc: sdc1 sdc2
><5>sd 3:0:0:0: Attached scsi removable disk sdc
><7>usb-storage: device scan complete
><7>eth0: no IPv6 routers present
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>eth0: no IPv6 routers present
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>security:  3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
><6>security:  58 classes, 48173 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
><6>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1146906365.636:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  5363.000 MB/sec
><4>raid5: using function: pIII_sse (5363.000 MB/sec)
><4>raid6: int32x1    833 MB/s
><4>raid6: int32x2    880 MB/s
><4>raid6: int32x4    974 MB/s
><4>raid6: int32x8    803 MB/s
><4>raid6: mmxx1     2033 MB/s
><4>raid6: mmxx2     2098 MB/s
><4>raid6: sse1x1    1249 MB/s
><4>raid6: sse1x2    1344 MB/s
><4>raid6: sse2x1    2490 MB/s
><4>raid6: sse2x2    2438 MB/s
><4>raid6: using algorithm sse2x1 (2490 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 16 2006 15:01:18) installed
><6>Lock_Nolock (built Oct 16 2006 15:02:21) installed
><6>JFS: nTxBlock = 8077, nTxLock = 64617
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.4 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1146906370.401:3): audit_pid=726 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 213148: 144778 | 144779