Attachment 145212 Details for Bug 222073 – dmesg

dmesg

dmesg.txt (text/plain), 27.96 KB, created by sangu on 2007-01-10 00:37:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: sangu

Created: 2007-01-10 00:37:02 UTC

Size: 27.96 KB

patch

obsolete

>Linux version 2.6.19-1.2906.fc7 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #0 SMP Sun Jan 7 21:38:23 EST 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fde0000 end: 000000007fee0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fee0000 size: 0000000000003000 end: 000000007fee3000 type: 4
>copy_e820_map() start: 000000007fee3000 size: 000000000000d000 end: 000000007fef0000 type: 3
>copy_e820_map() start: 000000007fef0000 size: 0000000000010000 end: 000000007ff00000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3900
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524000) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524000
>early_node_map[1] active PFN ranges
>    0:        0 ->   524000
>On node 0 totalpages: 524000
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 3740 pages used for memmap
>  HighMem zone: 290884 pages, LIFO batch:31
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f7810
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee3040
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee30c0
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x7fee9a40
>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee9c40
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee9980
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>Detected 2009.306 MHz processor.
>Built 1 zonelists.  Total pages: 517348
>Kernel command line: ro root=LABEL=/
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0784000 soft=c0764000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1064 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2058064k/2096000k available (2079k kernel code, 36716k reserved, 1109k data, 244k init, 1178496k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0722000 - 0xc075f000   ( 244 kB)
>      .data : 0xc0607f27 - 0xc071d414   (1109 kB)
>      .text : 0xc0400000 - 0xc0607f27   (2079 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4020.13 BogoMIPS (lpj=2010068)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0785000 soft=c0765000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4017.94 BogoMIPS (lpj=2008974)
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
>Total of 2 processors activated (8038.08 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had 285 usecs TSC skew, fixed it up.
>CPU#1 had -285 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>migration_cost=128
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>Boot video device is 0000:05:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 10 11)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 10 11)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 *4 5 7 10 11)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: a000-afff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 9000-9fff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 8000-8fff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: 7000-7fff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 6000-6fff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2847k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1168420657.191:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0.
>PCI: Linking AER extended capability on 0000:00:0b.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0.
>PCI: Linking AER extended capability on 0000:00:0c.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0.
>PCI: Linking AER extended capability on 0000:00:0d.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0.
>PCI: Linking AER extended capability on 0000:00:0e.0
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>Allocate Port Service[0000:00:0b.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>Allocate Port Service[0000:00:0c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>Allocate Port Service[0000:00:0d.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>Allocate Port Service[0000:00:0e.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [THRM] (27 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>Time: acpi_pm clocksource has been installed.
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 806k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:07.0: version 3.2
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0xF883A480 ctl 0xF883A4A0 bmdma 0xCC00 irq 18
>ata2: SATA max UDMA/133 cmd 0xF883A580 ctl 0xF883A5A0 bmdma 0xCC08 irq 18
>scsi0 : sata_nv
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>usb 2-7: new high speed USB device using ehci_hcd and address 3
>usb 2-7: configuration #1 chosen from 1 choice
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0xF883C480 ctl 0xF883C4A0 bmdma 0xB800 irq 19
>ata4: SATA max UDMA/133 cmd 0xF883C580 ctl 0xF883C5A0 bmdma 0xB808 irq 19
>scsi2 : sata_nv
>usb 1-3: new low speed USB device using ohci_hcd and address 2
>usb 1-3: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input1
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-3
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1168420663.068:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>pata_amd 0000:00:06.0: version 0.2.7
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xE000 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xE008 irq 15
>scsi4 : pata_amd
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>input: PC Speaker as /class/input/input2
>EDAC MC: Ver: 2.0.1 Jan  7 2007
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ATA: abnormal status 0x8 on port 0x1F7
>scsi5 : pata_amd
>ata6.00: ATAPI, max UDMA/33
>ieee1394: Initialized config rom entry `ip1394'
>ata6.00: configured for UDMA/33
>scsi 5:0:0:0: CD-ROM            BENQ     DVD DD DW1620    B7T9 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>dvb-usb: found a 'DViCO FusionHDTV5 USB Gold' in cold state, will try to load a firmware
>dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
>usbcore: registered new interface driver dvb_usb_cxusb
>eth0: forcedeth.c: subsystem: 0147b:1c1b bound to 0000:00:0a.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>gameport: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xa800, speed 1217kHz
>usb 2-7: USB disconnect, address 3
>dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>intel8x0_measure_ac97_clock: measured 50537 usecs
>intel8x0: clocking to 46799
>lp: driver loaded but no devices found
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000000508dda1630]
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>usb 2-7: new high speed USB device using ehci_hcd and address 4
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>usb 2-7: configuration #1 chosen from 1 choice
>dvb-usb: found a 'DViCO FusionHDTV5 USB Gold' in warm state.
>**WARNING** I2C adapter driver [DViCO FusionHDTV5 USB Gold] forgot to specify physical device; fix it!
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (DViCO FusionHDTV5 USB Gold).
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>input: IR-receiver inside an USB DVB receiver as /class/input/input5
>dvb-usb: schedule remote query interval to 100 msecs.
>dvb-usb: DViCO FusionHDTV5 USB Gold successfully initialized and connected.
>BUG: unable to handle kernel paging request at virtual address 5a5a5a5a
> printing eip:
>5a5a5a5a
>*pde = 00000000
>Oops: 0000 [#1]
>SMP 
>last sysfs file: /devices/virtual/misc/device-mapper/dev
>Modules linked in: lgh06xf dm_mod lgdt330x video sbs i2c_ec dock button battery asus_acpi backlight ac parport_pc lp parport snd_intel8x0 snd_emu10k1_synth snd_emux_synth snd_seq_dummy snd_seq_virmidi snd_seq_oss snd_seq_midi_emul nvidia(P) snd_emu10k1 snd_seq_midi_event snd_seq sr_mod cdrom snd_rawmidi snd_ac97_codec snd_pcm_oss dvb_usb_cxusb dvb_usb ohci1394 dvb_core ac97_bus snd_mixer_oss snd_seq_device ieee1394 snd_pcm snd_util_mem dvb_pll snd_hwdep emu10k1_gp snd_timer k8_edac snd gameport i2c_nforce2 k8temp floppy edac_mc hwmon pcspkr soundcore forcedeth i2c_core pata_amd snd_page_alloc sg sata_nv ata_generic libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
>CPU:    1
>EIP:    0060:[<5a5a5a5a>]    Tainted: P      VLI
>EFLAGS: 00210206   (2.6.19-1.2906.fc7 #0)
>EIP is at 0x5a5a5a5a
>eax: f6e5e768   ebx: 5a5a5a5a   ecx: f6ea8000   edx: f6e9850c
>esi: f6e5e840   edi: c06f7d54   ebp: f711ff40   esp: f711ff34
>ds: 007b   es: 007b   ss: 0068
>Process udevd (pid: 1321, ti=f711f000 task=c2b5a030 task.ti=f711f000)
>Stack: c0553ccd f6e6ba68 f6e9951c f711ff70 c04b1523 00000080 bfce4618 c2b26d28 
>       f6e5e840 f6e9850c f711ff78 f6e6ba7c f7057944 c04b1492 bfce4618 f711ff90 
>       c0478f04 f711ff9c c04800a9 00000080 f7057944 fffffff7 00000003 f711ffb0 
>Call Trace:
> [<c04051c9>] show_trace_log_lvl+0x1a/0x2f
> [<c0405279>] show_stack_log_lvl+0x9b/0xa3
> [<c0405415>] show_registers+0x194/0x26a
> [<c0405618>] die+0x12d/0x242
> [<c060674f>] do_page_fault+0x3ee/0x4ba
> [<c0604f4c>] error_code+0x7c/0x84
> [<c04b1523>] sysfs_read_file+0x91/0x132
> [<c0478f04>] vfs_read+0xad/0x161
> [<c0479390>] sys_read+0x3d/0x61
> [<c0404058>] syscall_call+0x7/0xb
> =======================
>Code:  Bad EIP value.
>EIP: [<5a5a5a5a>] 0x5a5a5a5a SS:ESP 0068:f711ff34
> <1>BUG: unable to handle kernel paging request at virtual address 5a006763
> printing eip:
>c044582e
>*pde = 00000000
>Oops: 0002 [#2]
>SMP 
>last sysfs file: /devices/virtual/misc/device-mapper/dev
>Modules linked in: lgh06xf dm_mod lgdt330x video sbs i2c_ec dock button battery asus_acpi backlight ac parport_pc lp parport snd_intel8x0 snd_emu10k1_synth snd_emux_synth snd_seq_dummy snd_seq_virmidi snd_seq_oss snd_seq_midi_emul nvidia(P) snd_emu10k1 snd_seq_midi_event snd_seq sr_mod cdrom snd_rawmidi snd_ac97_codec snd_pcm_oss dvb_usb_cxusb dvb_usb ohci1394 dvb_core ac97_bus snd_mixer_oss snd_seq_device ieee1394 snd_pcm snd_util_mem dvb_pll snd_hwdep emu10k1_gp snd_timer k8_edac snd gameport i2c_nforce2 k8temp floppy edac_mc hwmon pcspkr soundcore forcedeth i2c_core pata_amd snd_page_alloc sg sata_nv ata_generic libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
>CPU:    1
>EIP:    0060:[<c044582e>]    Tainted: P      VLI
>EFLAGS: 00210212   (2.6.19-1.2906.fc7 #0)
>EIP is at module_put+0x19/0x2d
>eax: 5a006763   ebx: f6e6ba68   ecx: 00000000   edx: 5a006563
>esi: f6e5e840   edi: 5a006563   ebp: f711fdc4   esp: f711fdc4
>ds: 007b   es: 007b   ss: 0068
>Process udevd (pid: 1321, ti=f711f000 task=c2b5a030 task.ti=f711f000)
>Stack: f711fdd8 c04b1339 00000010 f6e9a27c f7057944 f711fe00 c047974b 00000000 
>       00000000 f6e949ac f7d27190 f6e9a27c f7057944 f71a4b1c 00000000 f711fe08 
>       c047980c f711fe20 c047710d 00000000 f71a4b1c 0000000c 00000001 f711fe40 
>Call Trace:
> [<c04051c9>] show_trace_log_lvl+0x1a/0x2f
> [<c0405279>] show_stack_log_lvl+0x9b/0xa3
> [<c0405415>] show_registers+0x194/0x26a
> [<c0405618>] die+0x12d/0x242
> [<c060674f>] do_page_fault+0x3ee/0x4ba
> [<c0604f4c>] error_code+0x7c/0x84
> [<c04b1339>] sysfs_release+0x33/0x53
> [<c047974b>] __fput+0xbe/0x168
> [<c047980c>] fput+0x17/0x19
> [<c047710d>] filp_close+0x54/0x5c
> [<c0428f36>] put_files_struct+0x67/0xa4
> [<c0429fb3>] do_exit+0x23d/0x72c
> [<c0405707>] die+0x21c/0x242
> [<c060674f>] do_page_fault+0x3ee/0x4ba
> [<c0604f4c>] error_code+0x7c/0x84
> [<c04b1523>] sysfs_read_file+0x91/0x132
> [<c0478f04>] vfs_read+0xad/0x161
> [<c0479390>] sys_read+0x3d/0x61
> [<c0404058>] syscall_call+0x7/0xb
> =======================
>Code: c0 5d c3 55 83 c0 04 89 e5 e8 df 38 0a 00 31 c0 5d c3 55 85 c0 89 e5 89 c2 74 22 65 a1 04 00 00 00 c1 e0 07 8d 84 10 80 01 00 00 <ff> 08 83 3a 02 75 0b 8b 82 88 11 00 00 e8 30 cf fd ff 5d c3 55 
>EIP: [<c044582e>] module_put+0x19/0x2d SS:ESP 0068:f711fdc4
> <1>Fixing recursive fault but reboot is needed!
>EXT3 FS on sda9, internal journal
>Adding 1028120k swap on /dev/sda8.  Priority:-1 extents:1 across:1028120k
>audit(1168388280.628:3): audit_pid=1868 old=0 by auid=4294967295
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: no IPv6 routers present
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 5:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 5:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 5:00.0] forgot to specify physical device; fix it!

Actions: View

Attachments on bug 222073: 145212