Attachment 145220 Details for Bug 222083 – Full serial capture of failed system

Full serial capture of failed system

fc6-d600-hang.messages (text/plain), 22.07 KB, created by Robert Hentosh on 2007-01-10 03:45:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert Hentosh

Created: 2007-01-10 03:45:08 UTC

Size: 22.07 KB

patch

obsolete

>Linux version 2.6.18-1.2869.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 14:51:19 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002ffae000 (usable)
> BIOS-e820: 000000002ffae000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>DMI 2.3 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
>Detected 1598.686 MHz processor.
>Built 1 zonelists.  Total pages: 196526
>Kernel command line: ro root=LABEL=/ console=ttyS0,115200 console=tty0
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 772776k/786104k available (2139k kernel code, 12728k reserved, 866k data, 240k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3198.51 BogoMIPS (lpj=1599258)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1351k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 could not be reserved
>pnp: 00:02: ioport range 0x808-0x80f could not be reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x810-0x85f could not be reserved
>pnp: 00:03: ioport range 0x860-0x87f has been reserved
>pnp: 00:03: ioport range 0x880-0x8bf has been reserved
>pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:08: ioport range 0x900-0x97f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: e8000000-efffffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: f6000000-f7ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:01.1
>  IO window: 0000d800-0000d8ff
>  IO window: 0000dc00-0000dcff
>  PREFETCH window: 42000000-43ffffff
>  MEM window: f8000000-f9ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: f6000000-fbffffff
>  PREFETCH window: 40000000-43ffffff
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1168371997.807:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 1E0E64C0A8BD9F26
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (51 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
>hda: HTS548040M9AT00, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: HL-DT-STCD-RW/DVD-ROM GCC-4243N, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:011d]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0498, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
>cs: IO port probe 0xd000-0xefff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>Yenta: CardBus bridge found at 0000:02:01.1 [1028:011d]
>Yenta: ISA IRQ mask 0x0498, PCI irq 11
>Socket status: 30000410
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
>cs: IO port probe 0xd000-0xefff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1<6>Time: acpi_pm clocksource has been installed.
> S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 386k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>pccard: PCMCIA card inserted into slot 1
>cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf6000000-0xfa1fffff 0xfae00000-0xfb3fffff
>pcmcia: registering new device pcmcia1.0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1168372007.692:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49555 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1168372008.245:3): policy loaded auid=4294967295
>mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
>mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
>mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x2000000
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 4, error -71
>usb 1-2: device not accepting address 5, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 13, error -71
>usb 1-2: device not accepting address 14, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 17, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 21, error -71
>usb 1-2: device not accepting address 22, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 25, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 29, error -71
>usb 1-2: device not accepting address 30, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 33, error -71
>usb 1-2: device not accepting address 34, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 39, error -71
>usb 1-2: device not accepting address 40, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 43, error -71
>usb 1-2: device not accepting address 44, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 47, error -71
>usb 1-2: device not accepting address 48, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 51, error -71
>usb 1-2: device not accepting address 52, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 57, error -71
>usb 1-2: device not accepting address 58, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 61, error -71
>usb 1-2: device not accepting address 62, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 65, error -71
>usb 1-2: device not accepting address 66, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 70, error -71
>usb 1-2: device not accepting address 71, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 76, error -71
>usb 1-2: device not accepting address 77, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 80, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 84, error -71
>usb 1-2: device not accepting address 85, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 88, error -71
>usb 1-2: device not accepting address 89, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 92, error -71
>usb 1-2: device not accepting address 93, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 96, error -71
>usb 1-2: device not accepting address 97, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 102, error -71
>usb 1-2: device not accepting address 103, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 106, error -71
>usb 1-2: device not accepting address 107, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: device not accepting address 110, error -71
>usb 1-2: device not accepting address 111, error -71
>BUG: spinlock recursion on CPU#0, firefox-bin/5756 (Not tainted)
> lock: e51c66c8, .magic: dead4ead, .owner: firefox-bin/5756, .owner_cpu: 0
> [<c04051db>] dump_trace+0x69/0x1af
> [<c0405339>] show_trace_log_lvl+0x18/0x2c
> [<c04058ed>] show_trace+0xf/0x11
> [<c04059ea>] dump_stack+0x15/0x17
> [<c04e978d>] _raw_spin_lock+0x35/0xdc
> [<f0c132f9>] acm_read_bulk+0x51/0xbf [cdc_acm]
> [<c058189f>] usb_hcd_giveback_urb+0x2d/0x5d
> [<f082865c>] uhci_giveback_urb+0x104/0x12b [uhci_hcd]
> [<f0828c79>] uhci_scan_schedule+0x4fc/0x77b [uhci_hcd]
> [<f082a6ed>] uhci_irq+0x129/0x13f [uhci_hcd]
> [<c05823f3>] usb_hcd_irq+0x23/0x50
> [<c044dcee>] handle_IRQ_event+0x23/0x49
> [<c044ddaa>] __do_IRQ+0x96/0xf2
> [<c04068bf>] do_IRQ+0x9e/0xbc
> =======================
>BUG: spinlock lockup on CPU#0, firefox-bin/5756, e51c66c8 (Not tainted)
> [<c04051db>] dump_trace+0x69/0x1af
> [<c0405339>] show_trace_log_lvl+0x18/0x2c
> [<c04058ed>] show_trace+0xf/0x11
> [<c04059ea>] dump_stack+0x15/0x17
> [<c04e9817>] _raw_spin_lock+0xbf/0xdc
> [<f0c132f9>] acm_read_bulk+0x51/0xbf [cdc_acm]
> [<c058189f>] usb_hcd_giveback_urb+0x2d/0x5d
> [<f082865c>] uhci_giveback_urb+0x104/0x12b [uhci_hcd]
> [<f0828c79>] uhci_scan_schedule+0x4fc/0x77b [uhci_hcd]
> [<f082a6ed>] uhci_irq+0x129/0x13f [uhci_hcd]
> [<c05823f3>] usb_hcd_irq+0x23/0x50
> [<c044dcee>] handle_IRQ_event+0x23/0x49
> [<c044ddaa>] __do_IRQ+0x96/0xf2
> [<c04068bf>] do_IRQ+0x9e/0xbc
> =======================

Actions: View

Attachments on bug 222083: 145220 | 149082