Attachment 145231 Details for Bug 221951 – Output of dmesg with kernel 2869

Output of dmesg with kernel 2869

dmesg_2869.lis (text/plain), 16.64 KB, created by Olaf Pasveer on 2007-01-10 06:41:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Olaf Pasveer

Created: 2007-01-10 06:41:38 UTC

Size: 16.64 KB

patch

obsolete

>Linux version 2.6.18-1.2869.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 14:51:19 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved)
> BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
> BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 262096
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32720 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f6f80
>ACPI: RSDT (v001 HP     HP0890   0x23070420 CPQ  0x00000001) @ 0x3fff0c84
>ACPI: FADT (v002 HP     HP0890   0x00000002 CPQ  0x00000001) @ 0x3fff0c00
>ACPI: SSDT (v001 COMPAQ  CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x3fff6f89
>ACPI: DSDT (v001 HP       nc6000 0x00010000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
>Detected 1594.893 MHz processor.
>Built 1 zonelists.  Total pages: 262096
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01810000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032788k/1048384k available (2139k kernel code, 14788k reserved, 866k data, 240k init, 130880k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3190.90 BogoMIPS (lpj=1595450)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1359k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [C045] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.C045] bus is 0
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #05 (-#08) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>PCI: Bus #09 (-#0c) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C045.C046._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C045.C057._PRT]
>ACPI: Embedded Controller [C0E8] (gpe 16) interrupt mode.
>ACPI: Power Resource [C16E] (on)
>ACPI: Power Resource [C13E] (on)
>ACPI: Power Resource [C185] (on)
>ACPI: Power Resource [C18C] (on)
>ACPI: Power Resource [C196] (on)
>ACPI: Power Resource [C0E7] (on)
>ACPI: PCI Interrupt Link [C0C2] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C3] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0C8] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0C9] (IRQs *10 11)
>ACPI: Power Resource [C202] (off)
>ACPI: Power Resource [C203] (off)
>ACPI: Power Resource [C204] (off)
>ACPI: Power Resource [C205] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 90300000-903fffff
>  PREFETCH window: 98000000-9fffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: 50000000-51ffffff
>  MEM window: 58000000-59ffffff
>PCI: Bus 5, cardbus bridge: 0000:02:06.1
>  IO window: 00004800-000048ff
>  IO window: 00004c00-00004cff
>  PREFETCH window: 52000000-53ffffff
>  MEM window: 5a000000-5bffffff
>PCI: Bus 9, cardbus bridge: 0000:02:06.3
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 54000000-55ffffff
>  MEM window: 5c000000-5dffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-5fff
>  MEM window: 90000000-902fffff
>  PREFETCH window: 50000000-56ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1168409878.672:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 1E0E64C0A8BD9F26
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C206] to D3
>ACPI: Transitioning device [C206] to D3
>ACPI: Fan [C206] (off)
>ACPI: Transitioning device [C207] to D3
>ACPI: Transitioning device [C207] to D3
>ACPI: Fan [C207] (off)
>ACPI: Transitioning device [C208] to D3
>ACPI: Transitioning device [C208] to D3
>ACPI: Fan [C208] (off)
>ACPI: Transitioning device [C209] to D3
>ACPI: Transitioning device [C209] to D3
>ACPI: Fan [C209] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ1] (42 C)
>ACPI: Thermal Zone [TZ2] (21 C)
>ACPI: Thermal Zone [TZ3] (18 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xb0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x3c20-0x3c27, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x3c28-0x3c2f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK3025GAS, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 > hda4
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:0890]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x56ffffff
>Yenta: CardBus bridge found at 0000:02:06.1 [103c:0890]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x56ffffff
>Yenta: CardBus bridge found at 0000:02:06.3 [103c:0890]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x56ffffff
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:C193,PNP0f13:C194] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 386k
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-2.1: new low speed USB device using uhci_hcd and address 4
>usb 1-2.1: configuration #1 chosen from 1 choice
>input: USBPS2 as /class/input/input2
>input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-2.1
>input: USBPS2 as /class/input/input3
>input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-2.1
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1168409886.970:2): selinux=0 auid=4294967295
>input: PS/2 Generic Mouse as /class/input/input4
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on hda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2562328k swap on /dev/hda5.  Priority:-1 extents:1 across:2562328k

Actions: View

Attachments on bug 221951: 145229 | 145230 | 145231 | 145232 | 145233 | 145234