Attachment 145344 Details for Bug 210161 – Boot log up to the kernel panic

Boot log up to the kernel panic

swing.log (text/plain), 28.78 KB, created by Frank Bures on 2007-01-11 13:27:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Bures

Created: 2007-01-11 13:27:29 UTC

Size: 28.78 KB

patch

obsolete

>[5n[5nAT
AT
AT
AT
[2J[0m[2J[30;01H03/07/2006-NF-CK804-6A61FT59C-00[02;04HPhoenix - Award WorkstationBIOS v6.00PG, An Energy Star Ally[03;04HCopyright (C) 1984-2003, Phoenix Technologies, LTD[05;01HTYAN Tomcat K8E S2865 BIOS V3.02[07;01HMain Processor : AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ [29;01HPress [0;1mDEL[0m to enter SETUP , [0;1mESC[0m to Enter Boot Menu[08;01H[5n[5n[5n[5nMemory Testing :  2096064K OK[07;64H, 2 CPUs[09;01HCPU0 Memory information: [0;1mDDR 400 CL: 3  ,2T Dual Channel, 128-bit[5n[5n[5n[5n[11;01H[0mDetecting IDE drives ...[11;01HIDE Channel 0 Master : WDC WD800JB-00JJC0 05.01C05[12;01HIDE Channel 0 Slave  : None [13;01HIDE Channel 1 Master : GCR-8525B 1.01[14;01HIDE Channel 1 Slave  : None [29;01H                                                 [15;01H[0m                                                                                [16;01H                                                                                [17;01H                                                                                [18;01H                                                                                [19;01H                                                                                [20;01H                                                                                [21;01H                                                                                [22;01H                                                                                [23;01H                                                                                [24;01H                                                                                [25;01H                                                                                [15;01H[2J[01;01H[0m[01;01H[02;01HMediaShield IDE ROM BIOS 5.50[02;01H[03;01HCopyright (C) 2005 NVIDIA Corp.[03;01H[04;01H[04;01H[05;01HDetecting array ...[05;01H[06;01H[06;01H[07;01H3233[07;01H    [07;01HWaiting for 3ware Controller to Initialize...[07;01H                                                      [07;01H3ware ATA RAID Controller : Escalade  9500S-12[07;01H[08;01HBIOS: BE9X 2.03.01.052  Firmware: FE9X 2.08.00.006[08;01H[09;01HBBU Status :OK                  [09;01H[10;01HUnit 0  Port 0   - WDC WD4000YR-01PLB0           372.61 GB                   [10;01H[11;01HUnit 1  Port 1   - WDC WD4000YR-01PLB0           372.61 GB                   [11;01H[12;01HUnit 2  Port 2   - WDC WD4000YR-01PLB0           372.61 GB                   [12;01H[13;01HUnit 3  Port 3   - WDC WD4000YR-01PLB0           372.61 GB                   [13;01H[14;01HUnit 4  Port 4   - WDC WD4000YR-01PLB0           372.61 GB                   [14;01H[15;01HUnit 5  Port 5   - WDC WD4000YR-01PLB0           372.61 GB                   [15;01H[16;01HUnit 6  Port 6   - WDC WD4000YR-01PLB0           372.61 GB                   [16;01H[17;01HUnit 7  Port 7   - WDC WD4000YR-01PLB0           372.61 GB                   [17;01H[18;01HUnit 8  Port 8   - WDC WD4000YR-01PLB0           372.61 GB                   [18;01H[19;01HUnit 9  Port 9   - WDC WD4000YR-01PLB0           372.61 GB                   [19;01H[20;01HUnit 10  Port 10  - WDC WD4000YR-01PLB0           372.61 GB                   [20;01H[21;01HUnit 11  Port 11  - WDC WD4000YR-01PLB0           372.61 GB                   [21;01H[22;01H[22;01H[23;01H    Press <Alt-3> to access 3ware BIOS Manager    [23;01H[24;01H3ware BIOS installed successfully[24;01H[25;01H[2J[01;01H[2J[01;28HPhoenix Technologies, LTD[03;01H================================================================================[15;01H===============================================================================[04;01H|[05;01H|[06;01H|[07;01H|[08;01H|[09;01H|[10;01H|[11;01H|[12;01H|[13;01H|[14;01H|[04;80H|[05;80H|[06;80H|[07;80H|[08;80H|[09;80H|[10;80H|[11;80H|[12;80H|[13;80H|[14;80H|[03;01H+[03;80H+[15;01H+[15;80H+[08;01H--------------------------------------------------------------------------------[08;01H-------------------------------------------------------------------------------[08;01H|[08;80H|[02;30HSystem Configurations[04;03HCPU ID/ucode ID[04;21H: 0F32/4D[05;03HCPU Clock[05;21H: 2412MHz[04;43HBase Memory[04;61H:     640K[05;43HExtended Memory[05;61H: 2095104K[06;43HL1 Cache Size[06;61H: [06;64H  128K X 2[07;43HL2 Cache Size[07;61H: [07;64H 1024K X 2[09;03HDiskette Drive A  : None           [10;03HDiskette Drive B  : None           [11;03HPri. Master Disk  : CHS [11;26H,ATA[11;31H100,   80GB[12;03HPri. Slave  Disk  : None[13;03HSec. Master Disk  : CDROM,DMA 2[14;03HSec. Slave  Disk  : None[09;43HDisplay Type[09;61H: Auto  [10;43HSerial Port(s)[10;61H: 3F8[10;67H2F8[11;43HParallel Port(s)  : None[12;43HDDR DIMM at Rows  : 2[12;65H3[12;67H6[12;69H7[18;01HPCI device listing ...[19;01HBus No. Device No. Func No. Vendor/Device Class Device Class               IRQ[20;01H--------------------------------------------------------------------------------[21;03H  0[21;12H 0[21;22H 0[21;29H10DE[21;36H005E[21;43H0580[21;49HMemory Controller[21;77HNA[22;03H  0[22;12H 1[22;22H 1[22;29H10DE[22;36H0052[22;43H0C05[22;49HSMBus Cntrlr[22;77H10[23;03H  0[23;12H 6[23;22H 0[23;29H10DE[23;36H0053[23;43H0101[23;49HIDE Cntrlr[23;77H14[24;03H  1[24;12H 6[24;22H 0[24;29H1106[24;36H3044[24;43H0C00[24;49HSerial Bus Cntrlr[24;77H11[25;03H  1[25;12H 8[25;22H 0[25;29H1002[25;36H4755[25;43H0300[25;49HDisplay Cntrlr[25;77HNA[25;80H
>[25;01H                                                                                [25;03H  1[25;12H 9[25;22H 0[25;29H13C1[25;36H1002[25;43H0104[25;49HRAID Cntrlr[25;77H11[25;80H
>[25;01H                                                                                [25;49HACPI Controller[25;77H 9[25;80H
>[25;01H                                                                                [25;01HVerifying DMI Pool Data ...........[25;01H[25;80H
>[25;01H[2J[01;01HBoot from CD : Boot from CD : [01;16H[01;01H[02;16H[01;01HEnter[25lBoot[01;06Hfrom[01;11HCD[01;14H:[25h[02;01HGRUB Loading stage1.5.[02;01H[03;01H[03;01H[04;01H[04;01H[05;01HGRUB loading, please wait...[05;01H[06;01H[2J[01;01H  Booting 'Red Hat Enterprise Linux AS (2.6.9-42.0.3.ELsmp)'[25l[01;03HBooting[01;11H'Red[01;16HHat[01;20HEnterprise[01;31HLinux[01;37HAS[01;40H(2.6.9-42.0.3.ELsmp)'[25h[01;61H[01;01H[02;01H[02;01H[03;01Hroot (hd0,0)[25l[03;01Hroot[03;06H(hd0,0)[25h[03;13H[03;01H[04;01H Filesystem type is ext2fs, partition type 0x83[25l[04;02HFilesystem[04;13Htype[04;18His[04;21Hext2fs,[04;29Hpartition[04;39Htype[04;44H0x83[25h[04;48H[04;01H[05;01Hkernel /vmlinuz-2.6.9-42.0.3.ELsmp ro root=/dev/md0 numa=off rhgb console=ttyS0[25l[05;01Hkernel[05;08H/vmlinuz-2.6.9-42.0.3.ELsmp[05;36Hro[05;39Hroot=/dev/md0[05;53Hnuma=off[05;62Hrhgb[05;67Hconsole=ttyS0[25h[05;80H[05;01H[06;01H,115200 console=tty0[25l[06;01H,115200[06;09Hconsole=tty0[25h[06;21H[06;01H[07;01H   [Linux-bzImage, setup=0x1400, size=0x195a4e][25l[07;04H[Linux-bzImage,[07;20Hsetup=0x1400,[07;34Hsize=0x195a4e][25h[07;48H[07;01H[08;01Hinitrd /initrd-2.6.9-42.0.3.ELsmp.img[25l[08;01Hinitrd[08;08H/initrd-2.6.9-42.0.3.ELsmp.img[25h[08;38H[08;01H[09;01H   [Linux-initrd @ 0x37f04000, 0xeb161 bytes][25l[09;04H[Linux-initrd[09;18H@[09;20H0x37f04000,[09;32H0xeb161[09;40Hbytes][25h[09;46H[09;01H[10;01H[10;01H[11;01HBootdata ok (command line is ro root=/dev/md0 numa=off rhgb console=ttyS0,115200 console=tty0)
>
Linux version 2.6.9-42.0.3.ELsmp (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Mon Sep 25 17:24:31 EDT 2006
>
BIOS-provided physical RAM map:
>
 BIOS-e820: 0000000000000000 - 0000000000096800 (usable)
>
 BIOS-e820: 0000000000096800 - 00000000000a0000 (reserved)
>
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>
 BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
>
 BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
>
 BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
>
 BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
>
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>
NUMA turned off
>
Faking a node at 0000000000000000-000000007fee0000
>
Bootmem setup node 0 0000000000000000-000000007fee0000
>
No mptable found.
>
DMI 2.2 present.
>
Nvidia board detected. Ignoring ACPI timer override.
>
ACPI: PM-Timer IO Port: 0x1008
>
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>
Processor #0 15:3 APIC version 16
>
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>
Processor #1 15:3 APIC version 16
>
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>
Setting APIC routing to flat
>
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>
Using ACPI (MADT) for SMP configuration information
>
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>
Checking aperture...
>
CPU 0: aperture @ ec48000000 size 32 MB
>
Aperture from northbridge cpu 0 too small (32 MB)
>
No AGP bridge found
>
Built 1 zonelists
>
Kernel command line: ro root=/dev/md0 numa=off rhgb console=ttyS0,115200 console=tty0
>
Initializing CPU#0
>
PID hash table entries: 4096 (order: 12, 131072 bytes)
>
time.c: Using 3.579545 MHz PM timer.
>
time.c: Detected 2411.157 MHz processor.
>
Console: colour VGA+ 80x25
>
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>
Memory: 2057760k/2096000k available (2106k kernel code, 0k reserved, 1297k data, 196k init)
>
Calibrating delay using timer specific routine.. 4826.85 BogoMIPS (lpj=2413429)
>
Security Scaffold v1.0.0 initialized
>
SELinux:  Initializing.
>
SELinux:  Starting in permissive mode
>
There is already a security framework initialized, register_security failed.
>
selinux_register_security:  Registering secondary module capability
>
Capability LSM initialized as secondary
>
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>
CPU: L2 Cache: 1024K (64 bytes/line)
>
CPU 0(2) -> Node 0
>
Using local APIC NMI watchdog using perfctr0
>
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>
CPU: L2 Cache: 1024K (64 bytes/line)
>
CPU 0(2) -> Node 0
>
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
>
per-CPU timeslice cutoff: 1023.78 usecs.
>
task migration cache decay timeout: 2 msecs.
>
Booting processor 1/1 rip 6000 rsp 100013f5f58
>
Initializing CPU#1
>
Calibrating delay using timer specific routine.. 4821.53 BogoMIPS (lpj=2410767)
>
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>
CPU: L2 Cache: 1024K (64 bytes/line)
>
CPU 1(2) -> Node 0
>
AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
>
Total of 2 processors activated (9648.39 BogoMIPS).
>
Using local APIC timer interrupts.
>
Detected 12.558 MHz APIC timer.
>
checking TSC synchronization across 2 CPUs: passed.
>
Brought up 2 CPUs
>
Disabling vsyscall due to use of PM timer
>
time.c: Using PM based timekeeping.
>
checking if image is initramfs... it is
>
NET: Registered protocol family 16
>
PCI: Using configuration type 1
>
PCI: Using MMCONFIG at e0000000
>
mtrr: v2.0 (20020519)
>
ACPI: Subsystem revision 20040816
>
ACPI: Interpreter enabled
>
ACPI: Using IOAPIC for interrupt routing
>
ACPI: PCI Root Bridge [PCI0] (00:00)
>
PCI: Probing PCI hardware (bus 00)
>
PCI: Transparent bridge - 0000:00:09.0
>
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 5 7 9 10 *11 12 14 15)
>
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 5 7 9 10 *11 12 14 15)
>
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 5 7 9 *10 11 12 14 15)
>
ACPI: PCI Interrupt Link [LACI] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 *5 7 9 10 11 12 14 15)
>
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 5 7 9 *10 11 12 14 15)
>
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 5 *7 9 10 11 12 14 15)
>
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>
usbcore: registered new driver usbfs
>
usbcore: registered new driver hub
>
PCI: Using ACPI for IRQ routing
>
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
>
GSI 16 sharing vector 0xB1 and IRQ 16
>
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, low) -> IRQ 177
>
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>
GSI 17 sharing vector 0xB9 and IRQ 17
>
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 22 (level, low) -> IRQ 185
>
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>
GSI 18 sharing vector 0xC1 and IRQ 18
>
ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 18 (level, low) -> IRQ 193
>
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 18 (level, low) -> IRQ 193
>
PCI-DMA: Disabling IOMMU.
>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>
audit: initializing netlink socket (disabled)
>
audit(1168503066.606:1): initialized
>
Total HugeTLB memory allocated, 0
>
VFS: Disk quotas dquot_6.5.1
>
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>
SELinux:  Registering netfilter hooks
>
Initializing Cryptographic API
>
ksign: Installing public key data
>
Loading keyring
>
- Added public key 751076F4FF368A58
>
- User ID: Red Hat, Inc. (Kernel Module GPG key)
>
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>
ACPI: Fan [FAN] (on)
>
ACPI: Processor [CPU0] (supports C1)
>
ACPI: Processor [CPU1] (supports C1)
>
ACPI: Thermal Zone [THRM] (38 C)
>
Real Time Clock Driver v1.12
>
Linux agpgart interface v0.100 (c) Dave Jones
>
serio: i8042 AUX port at 0x60,0x64 irq 12
>
serio: i8042 KBD port at 0x60,0x64 irq 1
>
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>
NFORCE-CK804: chipset revision 242
>
NFORCE-CK804: not 100% native mode: will probe irqs later
>
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
>
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
>
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
>
hda: WDC WD800JB-00JJC0, ATA DISK drive
>
Using cfq io scheduler
>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>
hdc: GCR-8525B, ATAPI CD/DVD-ROM drive
>
ide1 at 0x170-0x177,0x376 on irq 15
>
hda: max request size: 128KiB
>
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>
 hda: hda1 hda2 hda3
>
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>
Uniform CD-ROM driver Revision: 3.20
>
ide-floppy driver 0.99.newide
>
usbcore: registered new driver hiddev
>
usbcore: registered new driver usbhid
>
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>
mice: PS/2 mouse device common for all mice
>
input: AT Translated Set 2 keyboard on isa0060/serio0
>
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
NET: Registered protocol family 2
>
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>
TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>
TCP: Hash tables configured (established 262144 bind 262144)
>
Initializing IPsec netlink socket
>
NET: Registered protocol family 1
>
NET: Registered protocol family 17
>
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0)
>
powernow-k8: MP systems not supported by PSB BIOS structure
>
powernow-k8: init not cpu 0
>
ACPI: (supports S0 S1 S3 S4 S5)
>
ACPI wakeup devices: 
>
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
>
Freeing unused kernel memory: 196k freed
>
SCSI subsystem initialized
>
3ware 9000 Storage Controller device driver for Linux v2.26.04.010.
>
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 18 (level, low) -> IRQ 193
>
3w-9xxx: scsi0: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:.
>
scsi0 : 3ware 9000 Storage Controller
>
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfcffd000, IRQ: 193.
>
3w-9xxx: scsi0: Firmware FE9X 2.08.00.006, BIOS BE9X 2.03.01.052, Ports: 12.
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sda: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sda: drive cache: write back, no read (daft)
>
SCSI device sda: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sda: drive cache: write back, no read (daft)
>
 sda: sda1 sda2
>
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdb: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdb: drive cache: write back, no read (daft)
>
SCSI device sdb: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdb: drive cache: write back, no read (daft)
>
 sdb: sdb1 sdb2
>
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdc: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdc: drive cache: write back, no read (daft)
>
SCSI device sdc: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdc: drive cache: write back, no read (daft)
>
 sdc: sdc1 sdc2
>
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdd: drive cache: write back, no read (daft)
>
SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdd: drive cache: write back, no read (daft)
>
 sdd: sdd1 sdd2
>
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sde: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sde: drive cache: write back, no read (daft)
>
SCSI device sde: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sde: drive cache: write back, no read (daft)
>
 sde: sde1 sde2
>
Attached scsi disk sde at scsi0, channel 0, id 4, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdf: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdf: drive cache: write back, no read (daft)
>
SCSI device sdf: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdf: drive cache: write back, no read (daft)
>
 sdf: sdf1 sdf2
>
Attached scsi disk sdf at scsi0, channel 0, id 5, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdg: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdg: drive cache: write back, no read (daft)
>
SCSI device sdg: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdg: drive cache: write back, no read (daft)
>
 sdg: sdg1 sdg2
>
Attached scsi disk sdg at scsi0, channel 0, id 6, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdh: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdh: drive cache: write back, no read (daft)
>
SCSI device sdh: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdh: drive cache: write back, no read (daft)
>
 sdh: sdh1 sdh2
>
Attached scsi disk sdh at scsi0, channel 0, id 7, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdi: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdi: drive cache: write back, no read (daft)
>
SCSI device sdi: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdi: drive cache: write back, no read (daft)
>
 sdi: sdi1 sdi2
>
Attached scsi disk sdi at scsi0, channel 0, id 8, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdj: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdj: drive cache: write back, no read (daft)
>
SCSI device sdj: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdj: drive cache: write back, no read (daft)
>
 sdj: sdj1 sdj2
>
Attached scsi disk sdj at scsi0, channel 0, id 9, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdk: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdk: drive cache: write back, no read (daft)
>
SCSI device sdk: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdk: drive cache: write back, no read (daft)
>
 sdk: sdk1 sdk2
>
Attached scsi disk sdk at scsi0, channel 0, id 10, lun 0
>
  Vendor: AMCC      Model: 9500S-12   DISK   Rev: 2.08
>
  Type:   Direct-Access                      ANSI SCSI revision: 03
>
SCSI device sdl: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdl: drive cache: write back, no read (daft)
>
SCSI device sdl: 781228032 512-byte hdwr sectors (399989 MB)
>
SCSI device sdl: drive cache: write back, no read (daft)
>
 sdl: sdl1 sdl2
>
Attached scsi disk sdl at scsi0, channel 0, id 11, lun 0
>
raid5: automatically using best checksumming function: generic_sse
>
   generic_sse:  7384.000 MB/sec
>
raid5: using function: generic_sse (7384.000 MB/sec)
>
md: raid5 personality registered as nr 4
>
md: Autodetecting RAID arrays.
>
md: autorun ...
>
md: considering sdl2 ...
>
md:  adding sdl2 ...
>
md: sdl1 has different UUID to sdl2
>
md:  adding sdk2 ...
>
md: sdk1 has different UUID to sdl2
>
md:  adding sdj2 ...
>
md: sdj1 has different UUID to sdl2
>
md:  adding sdi2 ...
>
md: sdi1 has different UUID to sdl2
>
md:  adding sdh2 ...
>
md: sdh1 has different UUID to sdl2
>
md:  adding sdg2 ...
>
md: sdg1 has different UUID to sdl2
>
md:  adding sdf2 ...
>
md: sdf1 has different UUID to sdl2
>
md:  adding sde2 ...
>
md: sde1 has different UUID to sdl2
>
md:  adding sdd2 ...
>
md: sdd1 has different UUID to sdl2
>
md:  adding sdc2 ...
>
md: sdc1 has different UUID to sdl2
>
md:  adding sdb2 ...
>
md: sdb1 has different UUID to sdl2
>
md:  adding sda2 ...
>
md: sda1 has different UUID to sdl2
>
md: created md1
>
md: bind<sda2>
>
md: bind<sdb2>
>
md: bind<sdc2>
>
md: bind<sdd2>
>
md: bind<sde2>
>
md: bind<sdf2>
>
md: bind<sdg2>
>
md: bind<sdh2>
>
md: bind<sdi2>
>
md: bind<sdj2>
>
md: bind<sdk2>
>
md: bind<sdl2>
>
md: running: <sdl2><sdk2><sdj2><sdi2><sdh2><sdg2><sdf2><sde2><sdd2><sdc2><sdb2><sda2>
>
raid5: device sdl2 operational as raid disk 10
>
raid5: device sdj2 operational as raid disk 9
>
raid5: device sdi2 operational as raid disk 8
>
raid5: device sdh2 operational as raid disk 7
>
raid5: device sdg2 operational as raid disk 6
>
raid5: device sdf2 operational as raid disk 5
>
raid5: device sde2 operational as raid disk 4
>
raid5: device sdd2 operational as raid disk 3
>
raid5: device sdc2 operational as raid disk 2
>
raid5: device sdb2 operational as raid disk 1
>
raid5: device sda2 operational as raid disk 0
>
raid5: allocated 11612kB for md1
>
raid5: raid level 5 set md1 active with 11 out of 11 devices, algorithm 2
>
RAID5 conf printout:
>
 --- rd:11 wd:11 fd:0
>
 disk 0, o:1, dev:sda2
>
 disk 1, o:1, dev:sdb2
>
 disk 2, o:1, dev:sdc2
>
 disk 3, o:1, dev:sdd2
>
 disk 4, o:1, dev:sde2
>
 disk 5, o:1, dev:sdf2
>
 disk 6, o:1, dev:sdg2
>
 disk 7, o:1, dev:sdh2
>
 disk 8, o:1, dev:sdi2
>
 disk 9, o:1, dev:sdj2
>
 disk 10, o:1, dev:sdl2
>
md: considering sdl1 ...
>
md:  adding sdl1 ...
>
md:  adding sdk1 ...
>
md:  adding sdj1 ...
>
md:  adding sdi1 ...
>
md:  adding sdh1 ...
>
md:  adding sdg1 ...
>
md:  adding sdf1 ...
>
md:  adding sde1 ...
>
md:  adding sdd1 ...
>
md:  adding sdc1 ...
>
md:  adding sdb1 ...
>
md:  adding sda1 ...
>
md: created md0
>
md: bind<sda1>
>
md: bind<sdb1>
>
md: bind<sdc1>
>
md: bind<sdd1>
>
md: bind<sde1>
>
md: bind<sdf1>
>
md: bind<sdg1>
>
md: bind<sdh1>
>
md: bind<sdi1>
>
md: bind<sdj1>
>
md: bind<sdk1>
>
md: bind<sdl1>
>
md: running: <sdl1><sdk1><sdj1><sdi1><sdh1><sdg1><sdf1><sde1><sdd1><sdc1><sdb1><sda1>
>
md: md0: raid array is not clean -- starting background reconstruction
>
raid5: device sdk1 operational as raid disk 10
>
raid5: device sdj1 operational as raid disk 9
>
raid5: device sdi1 operational as raid disk 8
>
raid5: device sdh1 operational as raid disk 7
>
raid5: device sdg1 operational as raid disk 6
>
raid5: device sdf1 operational as raid disk 5
>
raid5: device sde1 operational as raid disk 4
>
raid5: device sdd1 operational as raid disk 3
>
raid5: device sdc1 operational as raid disk 2
>
raid5: device sdb1 operational as raid disk 1
>
raid5: device sda1 operational as raid disk 0
>
raid5: allocated 11612kB for md0
>
raid5: raid level 5 set md0 active with 11 out of 11 devices, algorithm 2
>
RAID5 conf printout:
>
 --- rd:11 wd:11 fd:0
>
 disk 0, o:1, dev:sda1
>
 disk 1, o:1, dev:sdb1
>
 disk 2, o:1, dev:sdc1
>
 disk 3, o:1, dev:sdd1
>
 disk 4, o:1, dev:sde1
>
 disk 5, o:1, dev:sdf1
>
 disk 6, o:1, dev:sdg1
>
 disk 7, o:1, dev:sdh1
>
 disk 8, o:1, dev:sdi1
>
 disk 9, o:1, dev:sdj1
>
 disk 10, o:1, dev:sdk1
>
md: ... autorun DONE.
>
md: Autodetecting RAID arrays.
>
md: autorun ...
>
md: ... autorun DONE.
>
md: syncing RAID array md0
>
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
>
md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction.
>
md: using 128k window, over a total of 10241280 blocks.
>
kjournald starting.  Commit interval 5 seconds
>
EXT3-fs: mounted filesystem with ordered data mode.
>
invalid operand: 0000 [1] SMP 
>
CPU 1 
>
Modules linked in: ext3 jbd raid5 xor 3w_9xxx sd_mod scsi_mod
>
Pid: 401, comm: md0_raid5 Not tainted 2.6.9-42.0.3.ELsmp
>
RIP: 0010:[<ffffffffa00377ad>] <ffffffffa00377ad>{:xor:xor_sse_5+18}
>
RSP: 0018:000001007c59dd28  EFLAGS: 00010206
>
RAX: 000001007c586000 RBX: 000001007c585000 RCX: 000001007c585000
>
RDX: 000001007c586000 RSI: 000001007c587000 RDI: 0000000000000010
>
RBP: 00000100013eea00 R08: 000001007c584000 R09: 000001007c583000
>
R10: 000001007c587000 R11: 000000008005003b R12: 000001007c57c808
>
R13: 0000000000000001 R14: 000001007c57c7b8 R15: 0000000000000000
>
FS:  0000000000000000(0000) GS:ffffffff804e5200(0000) knlGS:0000000000000000
>
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>
CR2: 0000000000577408 CR3: 00000000013f8000 CR4: 00000000000006e0
>
Process md0_raid5 (pid: 401, threadinfo 000001007c59c000, task 000001007dfac030)
>
Stack: 0000000000000000 0000000000000000 000001007dfbc4e0 000001007dfbc4c0 
>
       0000000000000000 000001007dca0ef0 0000000000000000 00000100010287e0 
>
       0000000000000006 ffffffffa003b29f 
>
Call Trace:<ffffffffa003b29f>{:raid5:compute_parity+891} <ffffffffa003beb7>{:raid5:handle_stripe+2838} 
>
       <ffffffffa003c8a9>{:raid5:raid5d+257} <ffffffffa003c7a8>{:raid5:raid5d+0} 
>
       <ffffffff802a050b>{md_thread+392} <ffffffff80135756>{autoremove_wake_function+0} 
>
       <ffffffff80135756>{autoremove_wake_function+0} <ffffffff80110f47>{child_rip+8} 
>
       <ffffffffa003c7a8>{:raid5:raid5d+0} <ffffffff802a0383>{md_thread+0} 
>
       <ffffffff80110f3f>{child_rip+0} 
>
>
Code: 0f 11 04 24 0f 11 4c 24 10 0f 11 54 24 20 0f 11 5c 24 30 b8 
>
RIP <ffffffffa00377ad>{:xor:xor_sse_5+18} RSP <000001007c59dd28>
>
 <0>Kernel panic - not syncing: Oops
>

Actions: View

Attachments on bug 210161: 142504 | 143632 | 145344 | 146947