Attachment 145355 Details for Bug 222174 – Fedora Core 6 dmesg from Toshiba

Fedora Core 6 dmesg from Toshiba

dmesg-fc6fedora.txt (text/plain), 16.00 KB, created by Max E on 2007-01-11 15:31:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Max E

Created: 2007-01-11 15:31:04 UTC

Size: 16.00 KB

patch

obsolete

> ACPI/GPIO/TCO
><4>PCI quirk: region eec0-eeff claimed by ICH6 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 14 devices
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>pnp: 00:09: ioport range 0x480-0x48f has been reserved
><3>PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: ce000000-cfffffff
><6>  PREFETCH window: b0000000-bfffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: c000-cfff
><6>  MEM window: cdf00000-cdffffff
><6>  PREFETCH window: disabled.
><4>PCI: Bus 4, cardbus bridge: 0000:03:0b.0
><4>  IO window: 00001000-000010ff
><4>  IO window: 00001400-000014ff
><4>  PREFETCH window: 30000000-31ffffff
><4>  MEM window: 34000000-35ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 1000-1fff
><6>  MEM window: cde00000-cdefffff
><6>  PREFETCH window: 30000000-31ffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
><6>ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 185
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
><4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
><6>TCP: Hash tables configured (established 16384 bind 8192)
><6>TCP reno registered
><6>Simple Boot Flag at 0x7c set to 0x1
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1168528157.676:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><6>Initializing Cryptographic API
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EAA0802BFF323905
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Thermal Zone [THRM] (73 C)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected an Intel 915GM Chipset.
><6>agpgart: AGP aperture is 256M @ 0x0
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>PCI: Enabling device 0000:00:1e.3 (0000 -> 0001)
><6>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 217
><6>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH6: IDE controller at PCI slot 0000:00:1f.1
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225
><6>ICH6: chipset revision 3
><6>ICH6: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xbf30-0xbf37, BIOS settings: hda:DMA, hdb:pio
><7>Probing IDE interface ide0...
><4>hda: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><4>ide-floppy driver 0.99.newide
><6>Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1b02, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
><6>cs: IO port probe 0x1000-0x1fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xcde00000 - 0xcdefffff
><6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
><6>usbcore: registered new driver libusual
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>ACPI: (supports S0 S3 S4 S5)
><6>Freeing unused kernel memory: 240k freed
><4>Write protecting the kernel read-only data: 370k
><6>Time: tsc clocksource has been installed.
><6>Time: acpi_pm clocksource has been installed.
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>input: PS/2 Mouse as /class/input/input1
><6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
><6>input: AT Translated Set 2 keyboard as /class/input/input3
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input4
><6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><4>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 233, io mem 0x32000000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bfe0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb 1-3: new high speed USB device using ehci_hcd and address 2
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 50
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bf80
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb 1-3: configuration #1 chosen from 1 choice
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000bf60
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><5>  Vendor: Easy      Model: Disk              Rev: 1100
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>SCSI device sda: 8125440 512-byte hdwr sectors (4160 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 43 00 00 00
><3>sda: assuming drive cache: write through
><5>SCSI device sda: 8125440 512-byte hdwr sectors (4160 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 43 00 00 00
><3>sda: assuming drive cache: write through
><6> sda: sda1
><5>sd 0:0:0:0: Attached scsi removable disk sda
><7>usb-storage: device scan complete
><7>ieee1394: Initialized config rom entry `ip1394'
><4>PCI: Enabling device 0000:03:0b.2 (0000 -> 0002)
><6>ACPI: PCI Interrupt 0000:03:0b.2[C] -> GSI 20 (level, low) -> IRQ 217
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[217]  MMIO=[cde05000-cde057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00003900008dee5f]
><6>cs: IO port probe 0x100-0x3af: clean.
><6>usbcore: deregistering driver usb-storage
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>sky2 v1.5 addr 0xcdffc000 irq 169 Yukon-EC (0xb6) rev 1
><6>sky2 eth0: addr 00:0e:7b:1c:fe:74
><7>libata version 2.00 loaded.
><7>ata_piix 0000:00:1f.2: version 2.00
><6>ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
><3>ata_piix 0000:00:1f.2: invalid MAP value 128
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 50
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ata1: SATA max UDMA/133 cmd 0xBF28 ctl 0xBF26 bmdma 0xBF00 irq 50
><6>ata2: SATA max UDMA/133 cmd 0xBF18 ctl 0xBF16 bmdma 0xBF08 irq 50
><6>scsi1 : ata_piix
><4>ata1: port is slow to respond, please be patient
><3>ata1: port failed to respond (30 secs)
><3>ata1: SRST failed (status 0xFF)
><3>ata1: SRST failed (err_mask=0x100)
><4>ata1: softreset failed, retrying in 5 secs
><3>ata1: SRST failed (status 0xFF)
><3>ata1: SRST failed (err_mask=0x100)
><4>ata1: softreset failed, retrying in 5 secs
><3>ata1: SRST failed (status 0xFF)
><3>ata1: SRST failed (err_mask=0x100)
><3>ata1: reset failed, giving up
><6>scsi2 : ata_piix
><4>ata2: port is slow to respond, please be patient
><3>ata2: port failed to respond (30 secs)
><3>ata2: SRST failed (status 0xFF)
><3>ata2: SRST failed (err_mask=0x100)
><4>ata2: softreset failed, retrying in 5 secs
><3>ata2: SRST failed (status 0xFF)
><3>ata2: SRST failed (err_mask=0x100)
><4>ata2: softreset failed, retrying in 5 secs
><3>ata2: SRST failed (status 0xFF)
><3>ata2: SRST failed (err_mask=0x100)
><3>ata2: reset failed, giving up
><6>Initializing USB Mass Storage driver...
><6>scsi3 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>usb 1-3: reset high speed USB device using ehci_hcd and address 2
><5>  Vendor: Easy      Model: Disk              Rev: 1100
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>SCSI device sda: 8125440 512-byte hdwr sectors (4160 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 43 00 00 00
><3>sda: assuming drive cache: write through
><5>SCSI device sda: 8125440 512-byte hdwr sectors (4160 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 43 00 00 00
><3>sda: assuming drive cache: write through
><6> sda: sda1
><5>sd 3:0:0:0: Attached scsi removable disk sda
><7>usb-storage: device scan complete
><6>security:  3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
><6>security:  58 classes, 48173 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1168528320.238:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  4959.000 MB/sec
><4>raid5: using function: pIII_sse (4959.000 MB/sec)
><4>raid6: int32x1    575 MB/s
><4>raid6: int32x2    677 MB/s
><4>raid6: int32x4    645 MB/s
><4>raid6: int32x8    587 MB/s
><4>raid6: mmxx1     1855 MB/s
><4>raid6: mmxx2     2043 MB/s
><4>raid6: sse1x1    1383 MB/s
><4>raid6: sse1x2    2128 MB/s
><4>raid6: sse2x1    2437 MB/s
><4>raid6: sse2x2    2598 MB/s
><4>raid6: using algorithm sse2x2 (2598 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 16 2006 15:01:18) installed
><6>Lock_Nolock (built Oct 16 2006 15:02:21) installed
><6>JFS: nTxBlock = 4021, nTxLock = 32169
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.4 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1168528327.466:3): audit_pid=747 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>SELinux: initialized (dev sda1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 222174: 145274 | 145289 | 145355