Attachment 145465 Details for Bug 222465 – output of dmesg after boot

output of dmesg after boot

dmesg.out (text/plain), 23.40 KB, created by Jonathan Underwood on 2007-01-12 17:39:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jonathan Underwood

Created: 2007-01-12 17:39:55 UTC

Size: 23.40 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
>Linux version 2.6.18-1.2869.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 14:51:34 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f5ffc00 (usable)
> BIOS-e820: 000000007f5ffc00 - 000000007f601c00 (ACPI NVS)
> BIOS-e820: 000000007f603c00 - 000000007f653c00 (reserved)
> BIOS-e820: 000000007f653c00 - 000000007f655c00 (ACPI data)
> BIOS-e820: 000000007f655c00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000febf0
>ACPI: XSDT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fce8e
>ACPI: FADT (v003 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fcfb6
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0x00000000fff6df0e
>ACPI: MADT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd0aa
>ACPI: BOOT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd13c
>ACPI: ASF! (v032 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd164
>ACPI: MCFG (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd1f6
>ACPI: HPET (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd234
>ACPI: TCPA (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd490
>  >>> ERROR: Invalid checksum
>ACPI: SLIC (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd26c
>ACPI: SSDT (v001 DpgPmm  Cpu0Ist 0x00000011 INTL 0x20050624) @ 0x000000007f5ffc40
>ACPI: SSDT (v001 DpgPmm  Cpu1Ist 0x00000011 INTL 0x20050624) @ 0x000000007f600049
>ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000010 INTL 0x20050624) @ 0x000000007f600452
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f5ff000
>Bootmem setup node 0 0000000000000000-000000007f5ff000
>On node 0 totalpages: 512257
>  DMA zone: 2713 pages, LIFO batch:0
>  DMA32 zone: 509544 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 8 CPUs, 6 hotplug CPUs
>Built 1 zonelists.  Total pages: 512257
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 2394.005 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 2043800k/2086908k available (2405k kernel code, 42720k reserved, 1575k data, 204k init)
>Calibrating delay using timer specific routine.. 4791.24 BogoMIPS (lpj=2395620)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16625016
>Detected 16.625 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4788.05 BogoMIPS (lpj=2394026)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=232 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>migration_cost=18
>checking if image is initramfs... it is
>Freeing initrd memory: 1516k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>pnp: 00:09: ioport range 0x100-0x1fe has been reserved
>pnp: 00:09: ioport range 0x200-0x277 has been reserved
>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:09: ioport range 0x300-0x377 has been reserved
>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1168620411.665:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 13A646AEEF086E5B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Write protecting the kernel read-only data: 461k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000ff20
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 17 sharing vector 0xC9 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 201, io base 0x0000ff00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 18 sharing vector 0xD1 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff80
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000ff60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>GSI 19 sharing vector 0xD9 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000ff40
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 20 sharing vector 0xE1 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 225, io mem 0xdfdfbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>GSI 21 sharing vector 0xE9 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEC0 irq 233
>ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEC8 irq 233
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/100
>usb 7-5: new high speed USB device using ehci_hcd and address 3
>usb 7-5: configuration #1 chosen from 1 choice
>hub 7-5:1.0: USB hub found
>hub 7-5:1.0: 4 ports detected
>ata2.00: configured for UDMA/100
>  Vendor: ATA       Model: WDC WD2500JS-75N  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: HL-DT-ST  Model: DVD+-RW GSA-H31N  Rev: B106
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0xFE40 ctl 0xFE52 bmdma 0xFED0 irq 233
>ata4: SATA max UDMA/133 cmd 0xFE60 ctl 0xFE72 bmdma 0xFED8 irq 233
>scsi2 : ata_piix
>usb 4-2: new low speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>input: Dell Premium USB Optical Mouse as /class/input/input0
>input: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-2
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2
>ata3: port is slow to respond, please be patient
>ata3: port failed to respond (30 secs)
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: softreset failed, retrying in 5 secs
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: softreset failed, retrying in 5 secs
>ata3: SRST failed (status 0xFF)
>ata3: SRST failed (err_mask=0x100)
>ata3: reset failed, giving up
>scsi3 : ata_piix
>ata4: port is slow to respond, please be patient
>ata4: port failed to respond (30 secs)
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: softreset failed, retrying in 5 secs
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: softreset failed, retrying in 5 secs
>ata4: SRST failed (status 0xFF)
>ata4: SRST failed (err_mask=0x100)
>ata4: reset failed, giving up
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1168620496.357:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49551 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1168620496.591:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 233
>tg3.c:v3.65 (August 07, 2006)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000BaseT Ethernet 00:19:b9:00:c2:49
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Floppy drive(s): fd0 is 1.44M
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100406, writing 100006)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>[drm] Initialized i915 1.5.0 20060119 on minor 0
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Actions: View

Attachments on bug 222465: 145465 | 145466