Attachment 1454884 Details for Bug 1595319 – Output of iw while wireless connection failing

Output of iw while wireless connection failing

bugzillaRequestedInfo.log (text/plain), 8.39 KB, created by Tom Brikowski on 2018-06-27 01:50:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Brikowski

Created: 2018-06-27 01:50:31 UTC

Size: 8.39 KB

patch

obsolete

>Script started on 2018-06-26 20:30:24-05:00
>{ivanpah-~/Admin/DHCPfix}34->uname -a

>Linux ivanpah 4.17.2-200.fc28.x86_64 #1 SMP Mon Jun 18 20:09:31 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
>{ivanpah-~/Admin/DHCPfix}35->sudo [K[K[K[K

>{ivanpah-~/Admin/DHCPfix}35->iw phy0 info

>iw: Command not found.
>{ivanpah-~/Admin/DHCPfix}36->/usr/sbin/iw

>iw*       iwconfig* iwevent*  iwgetid*  iwlist*   iwpriv*   iwspy*

>{ivanpah-~/Admin/DHCPfix}36->/usr/sbin/iw phy0 info

>Wiphy phy0
>	max # scan SSIDs: 20
>	max scan IEs length: 422 bytes
>	max # sched scan SSIDs: 20
>	max # match sets: 11
>	max # scan plans: 2
>	max scan plan interval: 65535
>	max scan plan iterations: 254
>	Retry short limit: 7
>	Retry long limit: 4
>	Coverage class: 0 (up to 0m)
>	Device supports RSN-IBSS.
>	Device supports AP-side u-APSD.
>	Device supports T-DLS.
>	Supported Ciphers:
>		* WEP40 (00-0f-ac:1)
>		* WEP104 (00-0f-ac:5)
>		* TKIP (00-0f-ac:2)
>		* CCMP-128 (00-0f-ac:4)
>		* CMAC (00-0f-ac:6)
>	Available Antennas: TX 0 RX 0
>	Supported interface modes:
>		 * IBSS
>		 * managed
>		 * AP
>		 * AP/VLAN
>		 * monitor
>		 * P2P-client
>		 * P2P-GO
>		 * P2P-device
>	Band 1:
>		Capabilities: 0x11ef
>			RX LDPC
>			HT20/HT40
>			SM Power Save disabled
>			RX HT20 SGI
>			RX HT40 SGI
>			TX STBC
>			RX STBC 1-stream
>			Max AMSDU length: 3839 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT Max RX data rate: 300 Mbps
>		HT TX/RX MCS rate indexes supported: 0-15
>		Bitrates (non-HT):
>			* 1.0 Mbps
>			* 2.0 Mbps (short preamble supported)
>			* 5.5 Mbps (short preamble supported)
>			* 11.0 Mbps (short preamble supported)
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>		Frequencies:
>			* 2412 MHz [1] (22.0 dBm)
>			* 2417 MHz [2] (22.0 dBm)
>			* 2422 MHz [3] (22.0 dBm)
>			* 2427 MHz [4] (22.0 dBm)
>			* 2432 MHz [5] (22.0 dBm)
>			* 2437 MHz [6] (22.0 dBm)
>			* 2442 MHz [7] (22.0 dBm)
>			* 2447 MHz [8] (22.0 dBm)
>			* 2452 MHz [9] (22.0 dBm)
>			* 2457 MHz [10] (22.0 dBm)
>			* 2462 MHz [11] (22.0 dBm)
>			* 2467 MHz [12] (22.0 dBm)
>			* 2472 MHz [13] (22.0 dBm)
>			* 2484 MHz [14] (disabled)
>	Band 2:
>		Capabilities: 0x11ef
>			RX LDPC
>			HT20/HT40
>			SM Power Save disabled
>			RX HT20 SGI
>			RX HT40 SGI
>			TX STBC
>			RX STBC 1-stream
>			Max AMSDU length: 3839 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT Max RX data rate: 300 Mbps
>		HT TX/RX MCS rate indexes supported: 0-15
>		VHT Capabilities (0x038071b0):
>			Max MPDU length: 3895
>			Supported Channel Width: neither 160 nor 80+80
>			RX LDPC
>			short GI (80 MHz)
>			TX STBC
>			SU Beamformee
>		VHT RX MCS set:
>			1 streams: MCS 0-9
>			2 streams: MCS 0-9
>			3 streams: not supported
>			4 streams: not supported
>			5 streams: not supported
>			6 streams: not supported
>			7 streams: not supported
>			8 streams: not supported
>		VHT RX highest supported: 0 Mbps
>		VHT TX MCS set:
>			1 streams: MCS 0-9
>			2 streams: MCS 0-9
>			3 streams: not supported
>			4 streams: not supported
>			5 streams: not supported
>			6 streams: not supported
>			7 streams: not supported
>			8 streams: not supported
>		VHT TX highest supported: 0 Mbps
>		Bitrates (non-HT):
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>		Frequencies:
>			* 5180 MHz [36] (22.0 dBm)
>			* 5200 MHz [40] (22.0 dBm)
>			* 5220 MHz [44] (22.0 dBm)
>			* 5240 MHz [48] (22.0 dBm)
>			* 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
>			* 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
>			* 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
>			* 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
>			* 5340 MHz [68] (disabled)
>			* 5360 MHz [72] (disabled)
>			* 5380 MHz [76] (disabled)
>			* 5400 MHz [80] (disabled)
>			* 5420 MHz [84] (disabled)
>			* 5440 MHz [88] (disabled)
>			* 5460 MHz [92] (disabled)
>			* 5480 MHz [96] (disabled)
>			* 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
>			* 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
>			* 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
>			* 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
>			* 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
>			* 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
>			* 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
>			* 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
>			* 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
>			* 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
>			* 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
>			* 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
>			* 5745 MHz [149] (22.0 dBm)
>			* 5765 MHz [153] (22.0 dBm)
>			* 5785 MHz [157] (22.0 dBm)
>			* 5805 MHz [161] (22.0 dBm)
>			* 5825 MHz [165] (22.0 dBm)
>			* 5845 MHz [169] (disabled)
>			* 5865 MHz [173] (disabled)
>			* 5885 MHz [177] (disabled)
>			* 5905 MHz [181] (disabled)
>	Supported commands:
>		 * new_interface
>		 * set_interface
>		 * new_key
>		 * start_ap
>		 * new_station
>		 * new_mpath
>		 * set_mesh_config
>		 * set_bss
>		 * authenticate
>		 * associate
>		 * deauthenticate
>		 * disassociate
>		 * join_ibss
>		 * join_mesh
>		 * remain_on_channel
>		 * set_tx_bitrate_mask
>		 * frame
>		 * frame_wait_cancel
>		 * set_wiphy_netns
>		 * set_channel
>		 * set_wds_peer
>		 * tdls_mgmt
>		 * tdls_oper
>		 * start_sched_scan
>		 * probe_client
>		 * set_noack_map
>		 * register_beacons
>		 * start_p2p_device
>		 * set_mcast_rate
>		 * connect
>		 * disconnect
>		 * channel_switch
>		 * set_qos_map
>		 * add_tx_ts
>		 * set_multicast_to_unicast
>	Supported TX frame types:
>		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>	Supported RX frame types:
>		 * IBSS: 0x40 0xb0 0xc0 0xd0
>		 * managed: 0x40 0xd0
>		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * mesh point: 0xb0 0xc0 0xd0
>		 * P2P-client: 0x40 0xd0
>		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * P2P-device: 0x40 0xd0
>	WoWLAN support:
>		 * wake up on disconnect
>		 * wake up on magic packet
>		 * wake up on pattern match, up to 20 patterns of 16-128 bytes,
>		   maximum packet offset 0 bytes
>		 * can do GTK rekeying
>		 * wake up on GTK rekey failure
>		 * wake up on EAP identity request
>		 * wake up on 4-way handshake
>		 * wake up on rfkill release
>		 * wake up on network detection, up to 11 match sets
>	software interface modes (can always be added):
>		 * AP/VLAN
>		 * monitor
>	valid interface combinations:
>		 * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
>		   total <= 3, #channels <= 2
>	HT Capability overrides:
>		 * MCS: ff ff ff ff ff ff ff ff ff ff
>		 * maximum A-MSDU length
>		 * supported channel width
>		 * short GI for 40 MHz
>		 * max A-MPDU length exponent
>		 * min MPDU start spacing
>	Device supports TX status socket option.
>	Device supports HT-IBSS.
>	Device supports SAE with AUTHENTICATE command
>	Device supports low priority scan.
>	Device supports scan flush.
>	Device supports per-vif TX power setting
>	P2P GO supports CT window setting
>	P2P GO supports opportunistic powersave setting
>	Driver supports full state transitions for AP/GO clients
>	Driver supports a userspace MPM
>	Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
>	Device adds DS IE to probe requests
>	Device can update TPC Report IE
>	Device supports static SMPS
>	Device supports dynamic SMPS
>	Device supports WMM-AC admission (TSPECs)
>	Device supports configuring vdev MAC-addr on create.
>	Device supports TDLS channel switching
>{ivanpah-~/Admin/DHCPfix}37->^Dexit
>
>Script done on 2018-06-26 20:31:57-05:00

Actions: View

Attachments on bug 1595319: 1454696 | 1454700 | 1454884 | 1456320