Attachment 145536 Details for Bug 222553 – dmesg after crash

dmesg after crash

PC_Suite_kernel_BUG_at_mm_slab_c_594.dmesg (text/plain), 15.51 KB, created by Mads Kiilerich on 2007-01-14 01:09:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mads Kiilerich

Created: 2007-01-14 01:09:04 UTC

Size: 15.51 KB

patch

obsolete

>Linux version 2.6.18-1.2869.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 14:51:19 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002f770000 (usable)
> BIOS-e820: 000000002f770000 - 000000002f77f000 (ACPI data)
> BIOS-e820: 000000002f77f000 - 000000002f780000 (ACPI NVS)
> BIOS-e820: 000000002f780000 - 000000002f800000 (reserved)
> BIOS-e820: 000000003f780000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>759MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 194416
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 190320 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ATI board detected. Disabling timer routing over 8254.
>Allocating PCI resources starting at 40000000 (gap: 3f800000:c0780000)
>Detected 1993.649 MHz processor.
>Built 1 zonelists.  Total pages: 194416
>Kernel command line: ro root=LABEL=/ acpi=off
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (015ff000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 764456k/777664k available (2139k kernel code, 12672k reserved, 866k data, 240k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3989.48 BogoMIPS (lpj=1994744)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf1ff 00000000 00000000 00000080 00000400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>CPU0: Intel Mobile Intel(R) Celeron(R) CPU 2.00GHz stepping 07
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1358k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 8000-803f claimed by ali7101 ACPI
>PCI quirk: region 8040-805f claimed by ali7101 SMB
>Boot video device is 0000:01:05.0
>PCI: Using ALI IRQ Router
>PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:0a.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: d4300000-d43fffff
>  PREFETCH window: dc000000-dfffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: 42000000-43ffffff
>PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
>PCI: Found IRQ 11 for device 0000:00:0a.0
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1168630502.586:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 1E0E64C0A8BD9F26
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected Ati IGP330/340/345/350/M chipset
>agpgart: AGP aperture is 64M @ 0xd8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>PCI: setting IRQ 10 as level-triggered
>PCI: Assigned IRQ 10 for device 0000:00:08.0
>0000:00:08.0: ttyS1 at I/O 0x1428 (irq = 10) is a 8250
>0000:00:08.0: ttyS2 at I/O 0x1440 (irq = 10) is a 8250
>0000:00:08.0: ttyS3 at I/O 0x1450 (irq = 10) is a 8250
>Couldn't register serial port 0000:00:08.0: -28
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 0000:00:10.0
>ALI15X3: chipset revision 196
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK2018GAP, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:00:0a.0 [103c:002a]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x06b8, PCI irq 11
>Socket status: 30000007
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 386k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Assigned IRQ 10 for device 0000:00:02.0
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 10, io mem 0xd4000000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>usb 1-1: configuration #1 chosen from 1 choice
>input: PS/2+USB Mouse as /class/input/input2
>input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-1
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: hda2: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 844566
>ext3_orphan_cleanup: deleting unreferenced inode 836630
>EXT3-fs: hda2: 154 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1168630520.470:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input3
>natsemi dp8381x driver, version 2.0, June 27, 2006
>  originally by Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/natsemi.html
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>PCI: Found IRQ 10 for device 0000:00:12.0
>natsemi eth0: NatSemi DP8381[56] at 0xd4004000 (0000:00:12.0), 00:0b:cd:a7:3a:e6, IRQ 10, port TP.
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
>PCI: setting IRQ 5 as level-triggered
>PCI: Found IRQ 5 for device 0000:00:06.0
>AC'97 1 does not respond - RESET
>AC'97 1 access is not valid [0xffffffff], removing mixer.
>ali mixer 1 creating error.
>floppy0: no floppy controllers found
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on hda2, internal journal
>Adding 305224k swap on /dev/hda3.  Priority:-1 extents:1 across:305224k
>Adding 511992k swap on /mnt/swapfile.  Priority:-2 extents:1271 across:11962684k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (6075 buckets, 48600 max) - 228 bytes per conntrack
>eth0: DSPCFG accepted after 0 usec.
>eth0: link up.
>eth0: Setting full-duplex based on negotiated link capability.
>eth0: remaining active for wake-on-lan
>eth0: DSPCFG accepted after 0 usec.
>eth0: link up.
>eth0: Setting full-duplex based on negotiated link capability.
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>serial8250: too much work for irq10
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>usb 1-2: new full speed USB device using ohci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>cdc_acm 1-2:1.10: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new driver cdc_ether
>rndis_host 1-2:1.12: RNDIS init failed, -32
>usb%d: unregister 'rndis_host' usb-0000:00:02.0-2, RNDIS device
>unregister_netdevice: device usb%d/eb183800 never was registered
>------------[ cut here ]------------
>kernel BUG at mm/slab.c:594!
>invalid opcode: 0000 [#1]
>SMP 
>last sysfs file: /class/tty/ttyACM0/dev
>Modules linked in: rndis_host cdc_ether cdc_acm usbnet hidp rfcomm l2cap bluetooth ipt_MASQUERADE iptable_nat ip_nat ip_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables dm_mirror dm_multipath dm_mod parport_pc lp parport snd_ali5451 snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device joydev snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd ide_cd i2c_ali15x3 soundcore natsemi i2c_ali1535 snd_page_alloc cdrom serio_raw pcspkr i2c_core ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    0
>EIP:    0060:[<c046b395>]    Not tainted VLI
>EFLAGS: 00010006   (2.6.18-1.2869.fc6 #1) 
>EIP is at kfree+0x2e/0x65
>eax: 8001006c   ebx: ffffffe0   ecx: eb183800   edx: c1562fa0
>esi: 00000282   edi: eb17d392   ebp: eb183c00   esp: d0c20dac
>ds: 007b   es: 007b   ss: 0068
>Process modprobe (pid: 3433, ti=d0c20000 task=ea0372c0 task.ti=d0c20000)
>Stack: ffffffe0 f028d906 eb183806 f028d12c c15f6680 00000000 ef065a40 00000000 
>       ef715b5c 00000000 c0614616 c0612d84 00000003 8efa75aa 00005eb5 00000292 
>       d0d49600 f025a720 eb183800 c4c254c8 d1739c00 f025b680 f025b6b4 c0584913 
>Call Trace:
> [<f028d12c>] usbnet_probe+0x561/0x574 [usbnet]
> [<c0584c22>] usb_probe_interface+0x58/0x86
> [<c0552ad5>] driver_probe_device+0x45/0x9a
> [<c0552c00>] __driver_attach+0x65/0x8f
> [<c055255a>] bus_for_each_dev+0x37/0x59
> [<c0552a36>] driver_attach+0x16/0x18
> [<c0552252>] bus_add_driver+0x6f/0x10d
> [<c0584a3f>] usb_register_driver+0x65/0xcb
> [<c043f237>] sys_init_module+0x17de/0x1977
> [<c0404013>] syscall_call+0x7/0xb
>DWARF2 unwinder stuck at syscall_call+0x7/0xb
>Leftover inexact backtrace:
> =======================
>Code: 56 89 c7 53 74 58 9c 5e fa 8d 90 00 00 00 40 c1 ea 0c c1 e2 05 03 15 90 c6 80 c0 8b 02 f6 c4 40 74 03 8b 52 0c 8b 02 84 c0 78 08 <0f> 0b 52 02 f3 90 63 c0 89 e0 8b 4a 18 25 00 f0 ff ff 8b 40 10 
>EIP: [<c046b395>] kfree+0x2e/0x65 SS:ESP 0068:d0c20dac
> <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c04051db>] dump_trace+0x69/0x1af
> [<c0405339>] show_trace_log_lvl+0x18/0x2c
> [<c04058ed>] show_trace+0xf/0x11
> [<c04059ea>] dump_stack+0x15/0x17
> [<c0439482>] down_read+0x12/0x20
> [<c04315e1>] blocking_notifier_call_chain+0xe/0x29
> [<c0427638>] do_exit+0x1b/0x776
> [<c040588e>] die+0x29d/0x2c2
> [<c0405fd3>] do_invalid_op+0xa2/0xab
> [<c0404b85>] error_code+0x39/0x40
>DWARF2 unwinder stuck at error_code+0x39/0x40
>Leftover inexact backtrace:
> [<c046b395>] kfree+0x2e/0x65
> [<f028d12c>] usbnet_probe+0x561/0x574 [usbnet]
> [<c0614616>] _spin_unlock_irq+0x5/0x7
> [<c0612d84>] schedule+0x960/0x9dd
> [<c0584913>] usb_match_dynamic_id+0x4d/0x55
> [<c0552b9b>] __driver_attach+0x0/0x8f
> [<c0584c22>] usb_probe_interface+0x58/0x86
> [<c0552ad5>] driver_probe_device+0x45/0x9a
> [<c0552c00>] __driver_attach+0x65/0x8f
> [<c055255a>] bus_for_each_dev+0x37/0x59
> [<c0552a36>] driver_attach+0x16/0x18
> [<c0552b9b>] __driver_attach+0x0/0x8f
> [<c0552252>] bus_add_driver+0x6f/0x10d
> [<c0584a3f>] usb_register_driver+0x65/0xcb
> [<c04315f6>] blocking_notifier_call_chain+0x23/0x29
> [<c043f237>] sys_init_module+0x17de/0x1977
> [<c046fba8>] vfs_read+0xa6/0x157
> [<c0404013>] syscall_call+0x7/0xb
> =======================
>usb 1-2: USB disconnect, address 3

Actions: View

Attachments on bug 222553: 145536 | 145538