Attachment 1455382 Details for Bug 1596342 – dmesg from boot -> X -> restart X

dmesg from boot -> X -> restart X

dmesg.txt (text/plain), 91.68 KB, created by Matthew Wilson on 2018-06-28 16:35:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matthew Wilson

Created: 2018-06-28 16:35:27 UTC

Size: 91.68 KB

patch

obsolete

>[    0.000000] Linux version 4.17.2-200.fc28.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #1 SMP Mon Jun 18 20:09:31 UTC 2018
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.17.2-200.fc28.x86_64 root=UUID=f0f731f1-8b1f-4b08-b2f0-31c660e59ce7 ro rhgb quiet libata.force=noncq drm_kms_helper.edid_firmware=DVI-D-1:edid/dell2407.bin LANG=en_GB.UTF-8
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d513efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d513f000-0x00000000d5159fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000d515a000-0x00000000da84bfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000da84c000-0x00000000da98bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000da98c000-0x00000000da995fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000da996000-0x00000000daa9dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000daa9e000-0x00000000dae59fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dae5a000-0x00000000db93efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000db93f000-0x00000000ddffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] e820: update [mem 0x9fac4018-0x9fad2057] usable ==> usable
>[    0.000000] e820: update [mem 0x9fac4018-0x9fad2057] usable ==> usable
>[    0.000000] e820: update [mem 0x9faa7018-0x9fac3e57] usable ==> usable
>[    0.000000] e820: update [mem 0x9faa7018-0x9fac3e57] usable ==> usable
>[    0.000000] extended physical RAM map:
>[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x000000000400a000-0x0000000009bfffff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
>[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x000000009faa7017] usable
>[    0.000000] reserve setup_data: [mem 0x000000009faa7018-0x000000009fac3e57] usable
>[    0.000000] reserve setup_data: [mem 0x000000009fac3e58-0x000000009fac4017] usable
>[    0.000000] reserve setup_data: [mem 0x000000009fac4018-0x000000009fad2057] usable
>[    0.000000] reserve setup_data: [mem 0x000000009fad2058-0x00000000d513efff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000d513f000-0x00000000d5159fff] ACPI data
>[    0.000000] reserve setup_data: [mem 0x00000000d515a000-0x00000000da84bfff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000da84c000-0x00000000da98bfff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000da98c000-0x00000000da995fff] ACPI data
>[    0.000000] reserve setup_data: [mem 0x00000000da996000-0x00000000daa9dfff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000daa9e000-0x00000000dae59fff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x00000000dae5a000-0x00000000db93efff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000db93f000-0x00000000ddffffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000de000000-0x00000000dfffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
>[    0.000000] efi: EFI v2.60 by American Megatrends
>[    0.000000] efi:  ACPI 2.0=0xd513f000  ACPI=0xd513f000  SMBIOS=0xdb80c000  SMBIOS 3.0=0xdb80b000  ESRT=0xd83c9e18  MEMATTR=0xd819f018 
>[    0.000000] secureboot: Secure boot disabled
>[    0.000000] SMBIOS 3.1.1 present.
>[    0.000000] DMI: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF write-through
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
>[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
>[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] TOM2: 0000000420000000 aka 16896M
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
>[    0.000000] esrt: Reserving ESRT space from 0x00000000d83c9e18 to 0x00000000d83c9e50.
>[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x10baa3000, 0x10baa3fff] PGTABLE
>[    0.000000] BRK [0x10baa4000, 0x10baa4fff] PGTABLE
>[    0.000000] BRK [0x10baa5000, 0x10baa5fff] PGTABLE
>[    0.000000] BRK [0x10baa6000, 0x10baa6fff] PGTABLE
>[    0.000000] BRK [0x10baa7000, 0x10baa7fff] PGTABLE
>[    0.000000] BRK [0x10baa8000, 0x10baa8fff] PGTABLE
>[    0.000000] BRK [0x10baa9000, 0x10baa9fff] PGTABLE
>[    0.000000] BRK [0x10baaa000, 0x10baaafff] PGTABLE
>[    0.000000] BRK [0x10baab000, 0x10baabfff] PGTABLE
>[    0.000000] BRK [0x10baac000, 0x10baacfff] PGTABLE
>[    0.000000] BRK [0x10baad000, 0x10baadfff] PGTABLE
>[    0.000000] BRK [0x10baae000, 0x10baaefff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x3c6a8000-0x3e152fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000D513F000 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000D513F098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000D5149AD0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180313/tbfadt-624)
>[    0.000000] ACPI: DSDT 0x00000000D513F1E0 00A8EA (v02 ALASKA A M I    01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x00000000DAE42E00 000040
>[    0.000000] ACPI: APIC 0x00000000D5149BE8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000D5149CC8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FIDT 0x00000000D5149D10 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 0x00000000D5158188 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x00000000D5149E08 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
>[    0.000000] ACPI: SSDT 0x00000000D5152AA0 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
>[    0.000000] ACPI: CRAT 0x00000000D51544F8 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
>[    0.000000] ACPI: CDIT 0x00000000D51550C8 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
>[    0.000000] ACPI: SSDT 0x00000000D51550F8 002DA8 (v01 AMD    AMD AOD  00000001 INTL 20120913)
>[    0.000000] ACPI: MCFG 0x00000000D5157EA0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
>[    0.000000] ACPI: HPET 0x00000000D5157EE0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
>[    0.000000] ACPI: SSDT 0x00000000D5157F18 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
>[    0.000000] ACPI: UEFI 0x00000000D5157F40 000042 (v01                 00000000      00000000)
>[    0.000000] ACPI: BGRT 0x00000000D5157F88 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: IVRS 0x00000000D5157FC0 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
>[    0.000000] ACPI: SSDT 0x00000000D5158090 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] system APIC only can use physical flat
>[    0.000000] Setting APIC routing to physical flat.
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
>[    0.000000] tsc: Fast TSC calibration failed
>[    0.000000] tsc: Using PIT calibration value
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
>[    0.000000]   node   0: [mem 0x000000000400a000-0x0000000009bfffff]
>[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000affffff]
>[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000d513efff]
>[    0.000000]   node   0: [mem 0x00000000d515a000-0x00000000da84bfff]
>[    0.000000]   node   0: [mem 0x00000000da996000-0x00000000daa9dfff]
>[    0.000000]   node   0: [mem 0x00000000db93f000-0x00000000ddffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
>[    0.000000] On node 0 totalpages: 4177647
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14064 pages used for memmap
>[    0.000000]   DMA32 zone: 900048 pages, LIFO batch:31
>[    0.000000]   Normal zone: 51150 pages used for memmap
>[    0.000000]   Normal zone: 3273600 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 97 pages
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] system APIC only can use physical flat
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
>[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x09c00000-0x09ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9faa7000-0x9faa7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fac3000-0x9fac3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fac4000-0x9fac4fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fad2000-0x9fad2fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd513f000-0xd5159fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda84c000-0xda98bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda98c000-0xda995fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdaa9e000-0xdae59fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdae5a000-0xdb93efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x558 with crng_init=0
>[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
>[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
>[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4112343
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.2-200.fc28.x86_64 root=UUID=f0f731f1-8b1f-4b08-b2f0-31c660e59ce7 ro rhgb quiet libata.force=noncq drm_kms_helper.edid_firmware=DVI-D-1:edid/dell2407.bin LANG=en_GB.UTF-8
>[    0.000000] Memory: 16249372K/16710588K available (12300K kernel code, 1611K rwdata, 4020K rodata, 2148K init, 1336K bss, 461216K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>[    0.000000] ftrace: allocating 37684 entries in 148 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
>[    0.000000] NR_IRQS: 65792, nr_irqs: 1096, preallocated irqs: 16
>[    0.000000] 	Offload RCU callbacks from CPUs: (none).
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180313
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.003000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.008000] tsc: Fast TSC calibration failed
>[    0.010000] tsc: PIT calibration matches HPET. 1 loops
>[    0.010000] tsc: Detected 3592.829 MHz processor
>[    0.010000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c9dd5ba4b, max_idle_ns: 440795257546 ns
>[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.65 BogoMIPS (lpj=3592829)
>[    0.010000] pid_max: default: 32768 minimum: 301
>[    0.011035] Security Framework initialized
>[    0.011036] Yama: becoming mindful.
>[    0.011038] SELinux:  Initializing.
>[    0.011059] SELinux:  Starting in permissive mode
>[    0.013528] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.014665] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.014719] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.014755] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.014945] CPU: Physical Processor ID: 0
>[    0.014945] CPU: Processor Core ID: 0
>[    0.014951] mce: CPU supports 23 MCE banks
>[    0.014969] LVT offset 1 assigned for vector 0xf9
>[    0.015034] LVT offset 2 assigned for vector 0xf4
>[    0.015045] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
>[    0.015045] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
>[    0.015046] Spectre V2 : Mitigation: Full AMD retpoline
>[    0.015047] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.015048] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
>[    0.020878] Freeing SMP alternatives memory: 36K
>[    0.024000] smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
>[    0.024000] Performance Events: Fam17h core perfctr, AMD PMU driver.
>[    0.024000] ... version:                0
>[    0.024000] ... bit width:              48
>[    0.024000] ... generic registers:      6
>[    0.024000] ... value mask:             0000ffffffffffff
>[    0.024000] ... max period:             00007fffffffffff
>[    0.024000] ... fixed-purpose events:   0
>[    0.024000] ... event mask:             000000000000003f
>[    0.024000] Hierarchical SRCU implementation.
>[    0.024000] smp: Bringing up secondary CPUs ...
>[    0.024000] x86: Booting SMP configuration:
>[    0.024000] .... node  #0, CPUs:        #1
>[    0.025017] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.025078]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
>[    0.037022] smp: Brought up 1 node, 12 CPUs
>[    0.037022] smpboot: Max logical packages: 2
>[    0.037022] smpboot: Total of 12 processors activated (86227.89 BogoMIPS)
>[    0.038488] devtmpfs: initialized
>[    0.038488] x86/mm: Memory block size: 128MB
>[    0.039603] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
>[    0.039603] PM: Registering ACPI NVS region [mem 0xdaa9e000-0xdae59fff] (3915776 bytes)
>[    0.039603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.039603] futex hash table entries: 4096 (order: 6, 262144 bytes)
>[    0.039603] pinctrl core: initialized pinctrl subsystem
>[    0.039603] RTC time: 17:24:07, date: 06/28/18
>[    0.040102] NET: Registered protocol family 16
>[    0.040167] audit: initializing netlink subsys (disabled)
>[    0.040172] audit: type=2000 audit(1530206647.040:1): state=initialized audit_enabled=0 res=1
>[    0.040172] cpuidle: using governor menu
>[    0.040172] ACPI: bus type PCI registered
>[    0.040172] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.040172] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.040172] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.040172] PCI: Using configuration type 1 for base access
>[    0.041610] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.041610] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.041610] cryptd: max_cpu_qlen set to 1000
>[    0.042010] ACPI: Added _OSI(Module Device)
>[    0.042010] ACPI: Added _OSI(Processor Device)
>[    0.042011] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.042011] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.042012] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.047978] ACPI: 7 ACPI AML tables successfully acquired and loaded
>[    0.049587] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.051405] ACPI: Interpreter enabled
>[    0.051417] ACPI: (supports S0 S3 S4 S5)
>[    0.051417] ACPI: Using IOAPIC for interrupt routing
>[    0.051641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.051812] ACPI: Enabled 4 GPEs in block 00 to 1F
>[    0.058313] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.058316] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.058435] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
>[    0.058547] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
>[    0.058555] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.058768] PCI host bridge to bus 0000:00
>[    0.058770] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
>[    0.058771] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
>[    0.058771] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
>[    0.058772] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.058773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.058774] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    0.058775] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
>[    0.058776] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
>[    0.058777] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.058782] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
>[    0.058844] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
>[    0.058924] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
>[    0.058979] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
>[    0.059076] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
>[    0.059155] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
>[    0.059220] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
>[    0.059272] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
>[    0.059369] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
>[    0.059451] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
>[    0.059520] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
>[    0.059570] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
>[    0.059596] pci 0000:00:07.1: enabling Extended Tags
>[    0.060020] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
>[    0.060099] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
>[    0.060150] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
>[    0.060177] pci 0000:00:08.1: enabling Extended Tags
>[    0.060248] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
>[    0.060363] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
>[    0.060567] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
>[    0.060773] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
>[    0.061007] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
>[    0.061046] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
>[    0.061086] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
>[    0.061125] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
>[    0.061164] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
>[    0.061205] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
>[    0.061244] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
>[    0.061363] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
>[    0.061384] pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
>[    0.061455] pci 0000:01:00.0: PME# supported from D3hot D3cold
>[    0.061513] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
>[    0.061556] pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
>[    0.061563] pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
>[    0.061599] pci 0000:01:00.1: PME# supported from D3hot D3cold
>[    0.061644] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
>[    0.061712] pci 0000:01:00.2: PME# supported from D3hot D3cold
>[    0.061787] pci 0000:00:01.3: PCI bridge to [bus 01-06]
>[    0.061790] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
>[    0.061791] pci 0000:00:01.3:   bridge window [mem 0xfe600000-0xfe7fffff]
>[    0.061858] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
>[    0.061938] pci 0000:02:00.0: PME# supported from D3hot D3cold
>[    0.062003] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
>[    0.062082] pci 0000:02:01.0: PME# supported from D3hot D3cold
>[    0.062144] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
>[    0.062223] pci 0000:02:04.0: PME# supported from D3hot D3cold
>[    0.062298] pci 0000:01:00.2: PCI bridge to [bus 02-06]
>[    0.062303] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
>[    0.062305] pci 0000:01:00.2:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.062360] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
>[    0.062400] pci 0000:03:00.0: reg 0x10: [io  0xf000-0xf0ff]
>[    0.062435] pci 0000:03:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
>[    0.062456] pci 0000:03:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
>[    0.062580] pci 0000:03:00.0: supports D1 D2
>[    0.062580] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.062739] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    0.062743] pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
>[    0.062745] pci 0000:02:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.062804] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
>[    0.062980] pci 0000:04:00.0: supports D1 D2
>[    0.062980] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.066022] pci 0000:02:01.0: PCI bridge to [bus 04-05]
>[    0.066189] pci 0000:04:00.0: PCI bridge to [bus 05]
>[    0.066257] pci 0000:02:04.0: PCI bridge to [bus 06]
>[    0.066347] pci 0000:07:00.0: [1002:67df] type 00 class 0x030000
>[    0.066371] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.066380] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
>[    0.066386] pci 0000:07:00.0: reg 0x20: [io  0xe000-0xe0ff]
>[    0.066392] pci 0000:07:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
>[    0.066398] pci 0000:07:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
>[    0.066410] pci 0000:07:00.0: BAR 0: assigned to efifb
>[    0.066453] pci 0000:07:00.0: supports D1 D2
>[    0.066454] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.066530] pci 0000:07:00.1: [1002:aaf0] type 00 class 0x040300
>[    0.066548] pci 0000:07:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
>[    0.066608] pci 0000:07:00.1: supports D1 D2
>[    0.066676] pci 0000:00:03.1: PCI bridge to [bus 07]
>[    0.066679] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
>[    0.066680] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.066683] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>[    0.066736] pci 0000:08:00.0: [1022:145a] type 00 class 0x130000
>[    0.066760] pci 0000:08:00.0: enabling Extended Tags
>[    0.066815] pci 0000:08:00.2: [1022:1456] type 00 class 0x108000
>[    0.066828] pci 0000:08:00.2: reg 0x18: [mem 0xfe400000-0xfe4fffff]
>[    0.066836] pci 0000:08:00.2: reg 0x24: [mem 0xfe500000-0xfe501fff]
>[    0.066841] pci 0000:08:00.2: enabling Extended Tags
>[    0.066901] pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330
>[    0.066912] pci 0000:08:00.3: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
>[    0.066930] pci 0000:08:00.3: enabling Extended Tags
>[    0.066954] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
>[    0.067007] pci 0000:00:07.1: PCI bridge to [bus 08]
>[    0.067010] pci 0000:00:07.1:   bridge window [mem 0xfe300000-0xfe5fffff]
>[    0.067258] pci 0000:09:00.0: [1022:1455] type 00 class 0x130000
>[    0.067284] pci 0000:09:00.0: enabling Extended Tags
>[    0.067344] pci 0000:09:00.2: [1022:7901] type 00 class 0x010601
>[    0.067371] pci 0000:09:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
>[    0.067377] pci 0000:09:00.2: enabling Extended Tags
>[    0.067403] pci 0000:09:00.2: PME# supported from D3hot D3cold
>[    0.067444] pci 0000:09:00.3: [1022:1457] type 00 class 0x040300
>[    0.067453] pci 0000:09:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
>[    0.067470] pci 0000:09:00.3: enabling Extended Tags
>[    0.067495] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
>[    0.067546] pci 0000:00:08.1: PCI bridge to [bus 09]
>[    0.067549] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.067786] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
>[    0.067826] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
>[    0.067860] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
>[    0.067903] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
>[    0.067942] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
>[    0.067974] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
>[    0.068010] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
>[    0.068041] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
>[    0.068391] pci 0000:07:00.0: vgaarb: setting as boot VGA device
>[    0.068391] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.068391] pci 0000:07:00.0: vgaarb: bridge control possible
>[    0.068391] vgaarb: loaded
>[    0.068391] SCSI subsystem initialized
>[    0.068391] libata version 3.00 loaded.
>[    0.068391] ACPI: bus type USB registered
>[    0.068391] usbcore: registered new interface driver usbfs
>[    0.068391] usbcore: registered new interface driver hub
>[    0.068391] usbcore: registered new device driver usb
>[    0.068391] pps_core: LinuxPPS API ver. 1 registered
>[    0.068391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.068391] PTP clock support registered
>[    0.068391] EDAC MC: Ver: 3.0.0
>[    0.068391] Registered efivars operations
>[    0.088445] PCI: Using ACPI for IRQ routing
>[    0.092781] PCI: pci_cache_line_size set to 64 bytes
>[    0.092835] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
>[    0.092836] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
>[    0.092836] e820: reserve RAM buffer [mem 0x9faa7018-0x9fffffff]
>[    0.092837] e820: reserve RAM buffer [mem 0x9fac4018-0x9fffffff]
>[    0.092837] e820: reserve RAM buffer [mem 0xd513f000-0xd7ffffff]
>[    0.092838] e820: reserve RAM buffer [mem 0xda84c000-0xdbffffff]
>[    0.092839] e820: reserve RAM buffer [mem 0xdaa9e000-0xdbffffff]
>[    0.092839] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
>[    0.092840] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
>[    0.092899] NetLabel: Initializing
>[    0.092900] NetLabel:  domain hash size = 128
>[    0.092900] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.092911] NetLabel:  unlabeled traffic allowed by default
>[    0.092913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.092913] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>[    0.094035] clocksource: Switched to clocksource tsc-early
>[    0.103332] VFS: Disk quotas dquot_6.6.0
>[    0.103347] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.103403] pnp: PnP ACPI init
>[    0.103509] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.103513] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.103559] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
>[    0.103561] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.103618] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.103732] system 00:03: [io  0x0300-0x030f] has been reserved
>[    0.103734] system 00:03: [io  0x0230-0x023f] has been reserved
>[    0.103735] system 00:03: [io  0x0290-0x029f] has been reserved
>[    0.103737] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.103784] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>[    0.103949] pnp 00:05: [dma 0 disabled]
>[    0.103983] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.104128] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.104129] system 00:06: [io  0x040b] has been reserved
>[    0.104130] system 00:06: [io  0x04d6] has been reserved
>[    0.104131] system 00:06: [io  0x0c00-0x0c01] has been reserved
>[    0.104132] system 00:06: [io  0x0c14] has been reserved
>[    0.104133] system 00:06: [io  0x0c50-0x0c51] has been reserved
>[    0.104134] system 00:06: [io  0x0c52] has been reserved
>[    0.104135] system 00:06: [io  0x0c6c] has been reserved
>[    0.104136] system 00:06: [io  0x0c6f] has been reserved
>[    0.104136] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
>[    0.104137] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
>[    0.104138] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
>[    0.104139] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
>[    0.104140] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
>[    0.104141] system 00:06: [io  0x0800-0x089f] has been reserved
>[    0.104142] system 00:06: [io  0x0b00-0x0b0f] has been reserved
>[    0.104143] system 00:06: [io  0x0b20-0x0b3f] has been reserved
>[    0.104144] system 00:06: [io  0x0900-0x090f] has been reserved
>[    0.104144] system 00:06: [io  0x0910-0x091f] has been reserved
>[    0.104146] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.104147] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
>[    0.104148] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
>[    0.104149] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.104150] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
>[    0.104151] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
>[    0.104152] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.104155] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.104459] pnp: PnP ACPI: found 7 devices
>[    0.110102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.110177] pci 0000:02:00.0: PCI bridge to [bus 03]
>[    0.110179] pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
>[    0.110183] pci 0000:02:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.110189] pci 0000:04:00.0: PCI bridge to [bus 05]
>[    0.110209] pci 0000:02:01.0: PCI bridge to [bus 04-05]
>[    0.110217] pci 0000:02:04.0: PCI bridge to [bus 06]
>[    0.110226] pci 0000:01:00.2: PCI bridge to [bus 02-06]
>[    0.110227] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
>[    0.110231] pci 0000:01:00.2:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.110237] pci 0000:00:01.3: PCI bridge to [bus 01-06]
>[    0.110238] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
>[    0.110240] pci 0000:00:01.3:   bridge window [mem 0xfe600000-0xfe7fffff]
>[    0.110244] pci 0000:00:03.1: PCI bridge to [bus 07]
>[    0.110245] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
>[    0.110247] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.110248] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
>[    0.110251] pci 0000:00:07.1: PCI bridge to [bus 08]
>[    0.110253] pci 0000:00:07.1:   bridge window [mem 0xfe300000-0xfe5fffff]
>[    0.110257] pci 0000:00:08.1: PCI bridge to [bus 09]
>[    0.110259] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.110263] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
>[    0.110264] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
>[    0.110265] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
>[    0.110266] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    0.110267] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    0.110268] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    0.110269] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
>[    0.110270] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
>[    0.110271] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
>[    0.110272] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
>[    0.110273] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
>[    0.110273] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
>[    0.110274] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
>[    0.110275] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
>[    0.110276] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
>[    0.110277] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
>[    0.110278] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
>[    0.110279] pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe5fffff]
>[    0.110280] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
>[    0.110334] NET: Registered protocol family 2
>[    0.110452] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
>[    0.110489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.110659] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.110783] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.110823] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.110861] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.110952] NET: Registered protocol family 1
>[    0.111092] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.111097] pci 0000:07:00.1: Linked as a consumer to 0000:07:00.0
>[    0.111218] PCI: CLS 64 bytes, default 64
>[    0.111250] Unpacking initramfs...
>[    0.395674] Freeing initrd memory: 27308K
>[    0.395718] AMD-Vi: IOMMU performance counters supported
>[    0.395968] iommu: Adding device 0000:00:01.0 to group 0
>[    0.396076] iommu: Adding device 0000:00:01.3 to group 1
>[    0.396176] iommu: Adding device 0000:00:02.0 to group 2
>[    0.396278] iommu: Adding device 0000:00:03.0 to group 3
>[    0.396387] iommu: Adding device 0000:00:03.1 to group 4
>[    0.396486] iommu: Adding device 0000:00:04.0 to group 5
>[    0.396600] iommu: Adding device 0000:00:07.0 to group 6
>[    0.396701] iommu: Adding device 0000:00:07.1 to group 7
>[    0.396808] iommu: Adding device 0000:00:08.0 to group 8
>[    0.396918] iommu: Adding device 0000:00:08.1 to group 9
>[    0.397030] iommu: Adding device 0000:00:14.0 to group 10
>[    0.397043] iommu: Adding device 0000:00:14.3 to group 10
>[    0.397172] iommu: Adding device 0000:00:18.0 to group 11
>[    0.397187] iommu: Adding device 0000:00:18.1 to group 11
>[    0.397201] iommu: Adding device 0000:00:18.2 to group 11
>[    0.397214] iommu: Adding device 0000:00:18.3 to group 11
>[    0.397227] iommu: Adding device 0000:00:18.4 to group 11
>[    0.397240] iommu: Adding device 0000:00:18.5 to group 11
>[    0.397253] iommu: Adding device 0000:00:18.6 to group 11
>[    0.397266] iommu: Adding device 0000:00:18.7 to group 11
>[    0.397372] iommu: Adding device 0000:01:00.0 to group 12
>[    0.397392] iommu: Adding device 0000:01:00.1 to group 12
>[    0.397412] iommu: Adding device 0000:01:00.2 to group 12
>[    0.397424] iommu: Adding device 0000:02:00.0 to group 12
>[    0.397435] iommu: Adding device 0000:02:01.0 to group 12
>[    0.397447] iommu: Adding device 0000:02:04.0 to group 12
>[    0.397467] iommu: Adding device 0000:03:00.0 to group 12
>[    0.397480] iommu: Adding device 0000:04:00.0 to group 12
>[    0.397610] iommu: Adding device 0000:07:00.0 to group 13
>[    0.397627] iommu: Using direct mapping for device 0000:07:00.0
>[    0.397652] iommu: Adding device 0000:07:00.1 to group 13
>[    0.397704] iommu: Adding device 0000:08:00.0 to group 14
>[    0.397792] iommu: Adding device 0000:08:00.2 to group 15
>[    0.397905] iommu: Adding device 0000:08:00.3 to group 16
>[    0.398008] iommu: Adding device 0000:09:00.0 to group 17
>[    0.398127] iommu: Adding device 0000:09:00.2 to group 18
>[    0.398223] iommu: Adding device 0000:09:00.3 to group 19
>[    0.398471] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
>[    0.398472] AMD-Vi: Extended features (0xf77ef22294ada):
>[    0.398473]  PPR NX GT IA GA PC GA_vAPIC
>[    0.398475] AMD-Vi: Interrupt remapping enabled
>[    0.398475] AMD-Vi: virtual APIC enabled
>[    0.398571] AMD-Vi: Lazy IO/TLB flushing enabled
>[    0.399577] amd_uncore: AMD NB counters detected
>[    0.399579] amd_uncore: AMD LLC counters detected
>[    0.399754] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
>[    0.400919] Initialise system trusted keyrings
>[    0.400929] Key type blacklist registered
>[    0.400956] workingset: timestamp_bits=36 max_order=22 bucket_order=0
>[    0.401750] zbud: loaded
>[    0.402080] pstore: using deflate compression
>[    0.402128] SELinux:  Registering netfilter hooks
>[    0.495065] alg: No test for 842 (842-generic)
>[    0.495080] alg: No test for 842 (842-scomp)
>[    0.498356] NET: Registered protocol family 38
>[    0.498358] Key type asymmetric registered
>[    0.498359] Asymmetric key parser 'x509' registered
>[    0.498384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
>[    0.498415] io scheduler noop registered
>[    0.498415] io scheduler deadline registered
>[    0.498445] io scheduler cfq registered (default)
>[    0.498446] io scheduler mq-deadline registered
>[    0.498534] atomic64_test: passed for x86-64 platform with CX8 and with SSE
>[    0.499997] pcieport 0000:00:01.3: AER enabled with IRQ 26
>[    0.500013] pcieport 0000:00:03.1: AER enabled with IRQ 27
>[    0.500029] pcieport 0000:00:07.1: AER enabled with IRQ 28
>[    0.500049] pcieport 0000:00:08.1: AER enabled with IRQ 30
>[    0.500071] efifb: probing for efifb
>[    0.500079] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
>[    0.500080] efifb: mode is 1024x768x32, linelength=4096, pages=1
>[    0.500080] efifb: scrolling: redraw
>[    0.500081] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.500155] Console: switching to colour frame buffer device 128x48
>[    0.501312] fb0: EFI VGA frame buffer device
>[    0.501393] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.501400] ACPI: Power Button [PWRB]
>[    0.501423] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.501432] ACPI: Power Button [PWRF]
>[    0.501465] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501520] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501603] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501689] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501766] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501842] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501897] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.501981] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.502060] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.502141] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.502215] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.502275] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
>[    0.502466] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    0.523386] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.524546] Non-volatile memory driver v1.3
>[    0.524566] Linux agpgart interface v0.103
>[    0.525297] ahci 0000:01:00.1: version 3.0
>[    0.525380] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
>[    0.525415] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
>[    0.525418] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
>[    0.525756] scsi host0: ahci
>[    0.525841] scsi host1: ahci
>[    0.525895] scsi host2: ahci
>[    0.525953] scsi host3: ahci
>[    0.525999] scsi host4: ahci
>[    0.526064] scsi host5: ahci
>[    0.526110] scsi host6: ahci
>[    0.526161] scsi host7: ahci
>[    0.526178] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 37
>[    0.526179] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 37
>[    0.526179] ata3: DUMMY
>[    0.526180] ata4: DUMMY
>[    0.526181] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 37
>[    0.526182] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 37
>[    0.526183] ata7: DUMMY
>[    0.526183] ata8: DUMMY
>[    0.526352] ahci 0000:09:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
>[    0.526354] ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
>[    0.526355] ahci 0000:09:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
>[    0.526569] scsi host8: ahci
>[    0.526623] scsi host9: ahci
>[    0.526665] scsi host10: ahci
>[    0.526717] scsi host11: ahci
>[    0.526732] ata9: DUMMY
>[    0.526732] ata10: DUMMY
>[    0.526734] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808200 irq 41
>[    0.526735] ata12: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808280 irq 42
>[    0.526776] libphy: Fixed MDIO Bus: probed
>[    0.526811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.526813] ehci-pci: EHCI PCI platform driver
>[    0.526821] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.526823] ohci-pci: OHCI PCI platform driver
>[    0.526829] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.526871] QUIRK: Enable AMD PLL fix
>[    0.526878] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    0.526903] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>[    0.582240] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000418
>[    0.582353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
>[    0.582354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.582355] usb usb1: Product: xHCI Host Controller
>[    0.582356] usb usb1: Manufacturer: Linux 4.17.2-200.fc28.x86_64 xhci-hcd
>[    0.582357] usb usb1: SerialNumber: 0000:01:00.0
>[    0.582423] hub 1-0:1.0: USB hub found
>[    0.582434] hub 1-0:1.0: 10 ports detected
>[    0.585555] xhci_hcd 0000:01:00.0: xHCI Host Controller
>[    0.585583] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
>[    0.585585] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
>[    0.585610] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
>[    0.585623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
>[    0.585624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.585624] usb usb2: Product: xHCI Host Controller
>[    0.585625] usb usb2: Manufacturer: Linux 4.17.2-200.fc28.x86_64 xhci-hcd
>[    0.585626] usb usb2: SerialNumber: 0000:01:00.0
>[    0.585677] hub 2-0:1.0: USB hub found
>[    0.585683] hub 2-0:1.0: 4 ports detected
>[    0.587020] xhci_hcd 0000:08:00.3: xHCI Host Controller
>[    0.587044] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
>[    0.587137] xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
>[    0.587223] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
>[    0.587224] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.587225] usb usb3: Product: xHCI Host Controller
>[    0.587226] usb usb3: Manufacturer: Linux 4.17.2-200.fc28.x86_64 xhci-hcd
>[    0.587227] usb usb3: SerialNumber: 0000:08:00.3
>[    0.587287] hub 3-0:1.0: USB hub found
>[    0.587291] hub 3-0:1.0: 4 ports detected
>[    0.587401] xhci_hcd 0000:08:00.3: xHCI Host Controller
>[    0.587422] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
>[    0.587424] xhci_hcd 0000:08:00.3: Host supports USB 3.0  SuperSpeed
>[    0.587435] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
>[    0.587447] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
>[    0.587448] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.587449] usb usb4: Product: xHCI Host Controller
>[    0.587449] usb usb4: Manufacturer: Linux 4.17.2-200.fc28.x86_64 xhci-hcd
>[    0.587450] usb usb4: SerialNumber: 0000:08:00.3
>[    0.587508] hub 4-0:1.0: USB hub found
>[    0.587513] hub 4-0:1.0: 4 ports detected
>[    0.587611] usbcore: registered new interface driver usbserial_generic
>[    0.587614] usbserial: USB Serial support registered for generic
>[    0.587630] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>[    0.587630] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
>[    0.588094] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.588097] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.588162] mousedev: PS/2 mouse device common for all mice
>[    0.588251] rtc_cmos 00:02: RTC can wake from S4
>[    0.588501] rtc_cmos 00:02: registered as rtc0
>[    0.588502] rtc_cmos 00:02: nvmem registration failed
>[    0.588523] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.588558] device-mapper: uevent: version 1.0.3
>[    0.588594] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
>[    0.588782] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.588802] usbcore: registered new interface driver usbhid
>[    0.588803] usbhid: USB HID core driver
>[    0.588878] drop_monitor: Initializing network drop monitor service
>[    0.589030] Initializing XFRM netlink socket
>[    0.589113] NET: Registered protocol family 10
>[    0.590405] Segment Routing with IPv6
>[    0.590417] mip6: Mobile IPv6
>[    0.590418] NET: Registered protocol family 17
>[    0.590817] RAS: Correctable Errors collector initialized.
>[    0.591419] microcode: CPU0: patch_level=0x08001137
>[    0.591422] microcode: CPU1: patch_level=0x08001137
>[    0.591426] microcode: CPU2: patch_level=0x08001137
>[    0.591429] microcode: CPU3: patch_level=0x08001137
>[    0.591430] microcode: CPU4: patch_level=0x08001137
>[    0.591436] microcode: CPU5: patch_level=0x08001137
>[    0.591440] microcode: CPU6: patch_level=0x08001137
>[    0.591444] microcode: CPU7: patch_level=0x08001137
>[    0.591448] microcode: CPU8: patch_level=0x08001137
>[    0.591453] microcode: CPU9: patch_level=0x08001137
>[    0.591458] microcode: CPU10: patch_level=0x08001137
>[    0.591463] microcode: CPU11: patch_level=0x08001137
>[    0.591481] microcode: Microcode Update Driver: v2.2.
>[    0.591488] AVX2 version of gcm_enc/dec engaged.
>[    0.591488] AES CTR mode by8 optimization enabled
>[    0.597487] sched_clock: Marking stable (597482451, 0)->(792003136, -194520685)
>[    0.597788] registered taskstats version 1
>[    0.597798] Loading compiled-in X.509 certificates
>[    0.620294] Loaded X.509 cert 'Fedora kernel signing key: 2f7d889bddb8101195b2b827617a608089bea002'
>[    0.621208] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
>[    0.621337] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
>[    0.621352] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
>[    0.621371] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
>[    0.621502] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
>[    0.622099] Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
>[    0.622809] zswap: loaded using pool lzo/zbud
>[    0.625109] Key type big_key registered
>[    0.626057] Key type encrypted registered
>[    0.626059] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
>[    0.626063] ima: Allocated hash algorithm: sha1
>[    0.626296]   Magic number: 6:283:442
>[    0.626444] rtc_cmos 00:02: setting system clock to 2018-06-28 17:24:08 UTC (1530206648)
>[    0.835103] ata1: SATA link down (SStatus 0 SControl 300)
>[    0.910343] usb 3-4: new full-speed USB device number 2 using xhci_hcd
>[    0.972356] usb 1-1: new high-speed USB device number 2 using xhci_hcd
>[    0.996465] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.996864] ata12.00: FORCE: horkage modified (noncq)
>[    0.996935] ata12.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
>[    0.996936] ata12.00: 5860533168 sectors, multi 16: LBA48 NCQ (not used)
>[    0.997055] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.997461] ata11.00: FORCE: horkage modified (noncq)
>[    0.997465] ata12.00: configured for UDMA/133
>[    0.997529] ata11.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
>[    0.997530] ata11.00: 5860533168 sectors, multi 16: LBA48 NCQ (not used)
>[    0.998017] ata11.00: configured for UDMA/133
>[    1.079548] usb 3-4: New USB device found, idVendor=03f0, idProduct=1017, bcdDevice= 1.00
>[    1.079550] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.079551] usb 3-4: Product: hp LaserJet 1300
>[    1.079552] usb 3-4: Manufacturer: Hewlett-Packard
>[    1.079553] usb 3-4: SerialNumber: 00CNCD447469
>[    1.103246] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4
>[    1.140343] ata2: SATA link down (SStatus 0 SControl 300)
>[    1.184917] usb 1-1: New USB device found, idVendor=0451, idProduct=8043, bcdDevice= 1.00
>[    1.184920] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    1.184921] usb 1-1: SerialNumber: 150400893D6B
>[    1.189907] hub 1-1:1.0: USB hub found
>[    1.192879] hub 1-1:1.0: 3 ports detected
>[    1.286849] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
>[    1.301411] usb 2-1: New USB device found, idVendor=0451, idProduct=8041, bcdDevice= 1.00
>[    1.301412] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.306416] hub 2-1:1.0: USB hub found
>[    1.306920] hub 2-1:1.0: 3 ports detected
>[    1.440038] tsc: Refined TSC clocksource calibration: 3593.248 MHz
>[    1.440048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb68e6ea4, max_idle_ns: 440795288133 ns
>[    1.440208] clocksource: Switched to clocksource tsc
>[    1.476427] usb 1-2: new high-speed USB device number 3 using xhci_hcd
>[    1.608040] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.609590] ata5.00: FORCE: horkage modified (noncq)
>[    1.609623] ata5.00: supports DRM functions and may not be fully accessible
>[    1.609624] ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
>[    1.609626] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (not used)
>[    1.611164] ata5.00: supports DRM functions and may not be fully accessible
>[    1.612433] ata5.00: configured for UDMA/133
>[    1.612686] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
>[    1.612842] sd 4:0:0:0: Attached scsi generic sg0 type 0
>[    1.612852] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    1.612862] sd 4:0:0:0: [sda] Write Protect is off
>[    1.612864] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.612883] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.614161]  sda: sda1 sda2 sda3 sda4 sda5 sda6
>[    1.614695] sd 4:0:0:0: [sda] supports TCG Opal
>[    1.614696] sd 4:0:0:0: [sda] Attached SCSI disk
>[    1.690983] usb 1-2: New USB device found, idVendor=0424, idProduct=2531, bcdDevice=41.00
>[    1.690986] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.690987] usb 1-2: Product: USB2134
>[    1.690988] usb 1-2: Manufacturer: SMSC
>[    1.696412] hub 1-2:1.0: USB hub found
>[    1.699010] hub 1-2:1.0: 3 ports detected
>[    1.790245] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
>[    1.806727] random: fast init done
>[    1.806729] usb 2-2: New USB device found, idVendor=0424, idProduct=5534, bcdDevice=41.00
>[    1.806730] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[    1.806731] usb 2-2: Product: USB5534
>[    1.806732] usb 2-2: Manufacturer: SMSC
>[    1.811518] hub 2-2:1.0: USB hub found
>[    1.811997] hub 2-2:1.0: 3 ports detected
>[    1.876049] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
>[    1.981023] usb 1-1.3: New USB device found, idVendor=0451, idProduct=8043, bcdDevice= 1.00
>[    1.981025] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    1.981026] usb 1-1.3: SerialNumber: 03010069D1C3
>[    1.986041] hub 1-1.3:1.0: USB hub found
>[    1.989017] hub 1-1.3:1.0: 3 ports detected
>[    2.036820] usb 2-1.3: new SuperSpeed USB device number 4 using xhci_hcd
>[    2.051269] usb 2-1.3: New USB device found, idVendor=0451, idProduct=8041, bcdDevice= 1.00
>[    2.051271] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.055036] hub 2-1.3:1.0: USB hub found
>[    2.055515] hub 2-1.3:1.0: 3 ports detected
>[    2.080432] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.081956] ata6.00: FORCE: horkage modified (noncq)
>[    2.082017] ata6.00: supports DRM functions and may not be fully accessible
>[    2.082019] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
>[    2.082020] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (not used)
>[    2.083764] ata6.00: supports DRM functions and may not be fully accessible
>[    2.085206] ata6.00: configured for UDMA/133
>[    2.085356] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
>[    2.085508] sd 5:0:0:0: Attached scsi generic sg1 type 0
>[    2.085583] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
>[    2.085604] sd 5:0:0:0: [sdb] Write Protect is off
>[    2.085606] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.085625] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.085693] scsi 10:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
>[    2.085773] sd 10:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
>[    2.085775] sd 10:0:0:0: [sdc] 4096-byte physical blocks
>[    2.085779] sd 10:0:0:0: [sdc] Write Protect is off
>[    2.085781] sd 10:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    2.085789] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.085790] sd 10:0:0:0: Attached scsi generic sg2 type 0
>[    2.085912] scsi 11:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
>[    2.086018] sd 11:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
>[    2.086019] sd 11:0:0:0: [sdd] 4096-byte physical blocks
>[    2.086025] sd 11:0:0:0: [sdd] Write Protect is off
>[    2.086026] sd 11:0:0:0: Attached scsi generic sg3 type 0
>[    2.086026] sd 11:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    2.086035] sd 11:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.086924]  sdb: sdb1 sdb2 sdb3 sdb4
>[    2.087428] sd 5:0:0:0: [sdb] supports TCG Opal
>[    2.087429] sd 5:0:0:0: [sdb] Attached SCSI disk
>[    2.147254]  sdd: sdd1 sdd2
>[    2.147600] sd 11:0:0:0: [sdd] Attached SCSI disk
>[    2.151246]  sdc: sdc1 sdc2
>[    2.151517] sd 10:0:0:0: [sdc] Attached SCSI disk
>[    2.226144] usb 1-7: new low-speed USB device number 5 using xhci_hcd
>[    2.440102] Freeing unused kernel memory: 2148K
>[    2.446022] Write protecting the kernel read-only data: 18432k
>[    2.447202] Freeing unused kernel memory: 2012K
>[    2.447384] Freeing unused kernel memory: 76K
>[    2.454357] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.454361] rodata_test: all tests were successful
>[    2.505096] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    2.517541] systemd[1]: Detected architecture x86-64.
>[    2.517543] systemd[1]: Running in initial RAM disk.
>[    2.525578] systemd[1]: Set hostname to <ryzen>.
>[    2.528537] zfs-generator: starting
>[    2.528633] zfs-generator: loading Dracut library from /lib/dracut-lib.sh
>[    2.529740] random: ln: uninitialized urandom read (6 bytes read)
>[    2.531932] usb 1-7: New USB device found, idVendor=046d, idProduct=c312, bcdDevice= 1.01
>[    2.531934] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.531936] usb 1-7: Product: USB Multimedia Keyboard
>[    2.531937] usb 1-7: Manufacturer: LITEON Technology
>[    2.548804] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.0/0003:046D:C312.0001/input/input5
>[    2.553353] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.553360] systemd[1]: Reached target Swap.
>[    2.553391] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.553430] systemd[1]: Listening on udev Control Socket.
>[    2.553440] systemd[1]: Reached target Timers.
>[    2.553446] systemd[1]: Reached target Local File Systems.
>[    2.553470] systemd[1]: Listening on udev Kernel Socket.
>[    2.553478] systemd[1]: Reached target Slices.
>[    2.560011] i2c /dev entries driver
>[    2.563355] audit: type=1130 audit(1530206650.435:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.587010] usb 1-2.3: new high-speed USB device number 6 using xhci_hcd
>[    2.592729] audit: type=1130 audit(1530206650.464:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.601256] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:01:00.0-7/input0
>[    2.601939] audit: type=1130 audit(1530206650.473:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.603651] audit: type=1130 audit(1530206650.475:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.619051] audit: type=1130 audit(1530206650.491:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.619054] audit: type=1131 audit(1530206650.491:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.619371] audit: type=1130 audit(1530206650.491:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.625103] audit: type=1130 audit(1530206650.497:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.683701] audit: type=1130 audit(1530206650.555:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.711802] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    2.712082] usb 1-2.3: New USB device found, idVendor=0424, idProduct=2532, bcdDevice=41.00
>[    2.712086] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.712087] usb 1-2.3: Product: USB2134
>[    2.712088] usb 1-2.3: Manufacturer: SMSC
>[    2.716296] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0x        (ptrval), 88:d7:f6:7a:68:88, XID 14100800 IRQ 58
>[    2.716299] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    2.717117] hub 1-2.3:1.0: USB hub found
>[    2.720082] hub 1-2.3:1.0: 3 ports detected
>[    2.727819] r8169 0000:03:00.0 enp3s0: renamed from eth0
>[    2.750699] [drm] drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead.
>[    2.764914] usb 2-2.3: new SuperSpeed USB device number 5 using xhci_hcd
>[    2.780619] usb 2-2.3: New USB device found, idVendor=0424, idProduct=5534, bcdDevice=41.00
>[    2.780621] usb 2-2.3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[    2.780622] usb 2-2.3: Product: USB5534
>[    2.780623] usb 2-2.3: Manufacturer: SMSC
>[    2.784124] hub 2-2.3:1.0: USB hub found
>[    2.784600] hub 2-2.3:1.0: 3 ports detected
>[    2.847022] usb 1-1.3.2: new high-speed USB device number 7 using xhci_hcd
>[    2.880156] [drm] amdgpu kernel modesetting enabled.
>[    2.882016] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
>[    2.892512] Parsing CRAT table with 1 nodes
>[    2.892515] Ignoring ACPI CRAT on non-APU system
>[    2.892517] Virtual CRAT table created for CPU
>[    2.892517] Parsing CRAT table with 1 nodes
>[    2.892518] Creating topology SYSFS entries
>[    2.892525] Topology: Add CPU node
>[    2.892526] Finished initializing topology
>[    2.892569] kfd kfd: Initialized module
>[    2.892712] checking generic (e0000000 300000) vs hw (e0000000 10000000)
>[    2.892713] fb: switching to amdgpudrmfb from EFI VGA
>[    2.892734] Console: switching to colour dummy device 80x25
>[    2.892982] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F0 0xEF).
>[    2.892992] [drm] register mmio base: 0xFE900000
>[    2.892993] [drm] register mmio size: 262144
>[    2.893000] [drm] probing gen 2 caps for device 1022:1453 = 737903/e
>[    2.893010] [drm] probing mlw for device 1022:1453 = 737903
>[    2.893011] [drm] add ip block number 0 <vi_common>
>[    2.893012] [drm] add ip block number 1 <gmc_v8_0>
>[    2.893012] [drm] add ip block number 2 <tonga_ih>
>[    2.893013] [drm] add ip block number 3 <powerplay>
>[    2.893014] [drm] add ip block number 4 <dm>
>[    2.893014] [drm] add ip block number 5 <gfx_v8_0>
>[    2.893015] [drm] add ip block number 6 <sdma_v3_0>
>[    2.893017] [drm] add ip block number 7 <uvd_v6_0>
>[    2.893018] [drm] add ip block number 8 <vce_v3_0>
>[    2.893028] [drm] UVD is enabled in VM mode
>[    2.893028] [drm] UVD ENC is enabled in VM mode
>[    2.893030] [drm] VCE enabled in VM mode
>[    2.893207] amdgpu 0000:07:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
>[    2.893222] ATOM BIOS: xxx-xxx-xxx
>[    2.893243] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
>[    2.893274] amdgpu 0000:07:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
>[    2.893275] amdgpu 0000:07:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
>[    2.893279] [drm] Detected VRAM RAM=4096M, BAR=256M
>[    2.893279] [drm] RAM width 256bits GDDR5
>[    2.893319] [TTM] Zone  kernel: Available graphics memory: 8210504 kiB
>[    2.893320] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    2.893320] [TTM] Initializing pool allocator
>[    2.893323] [TTM] Initializing DMA pool allocator
>[    2.893348] [drm] amdgpu: 4096M of VRAM memory ready
>[    2.893349] [drm] amdgpu: 4096M of GTT memory ready.
>[    2.893355] [drm] GART: num cpu pages 65536, num gpu pages 65536
>[    2.893418] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
>[    2.893524] [drm] Chained IB support enabled!
>[    2.894857] [drm] Found UVD firmware Version: 1.130 Family ID: 16
>[    2.895406] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
>[    2.953631] [drm] DM_PPLIB: values for Engine clock
>[    2.953632] [drm] DM_PPLIB:	 30000
>[    2.953632] [drm] DM_PPLIB:	 58800
>[    2.953633] [drm] DM_PPLIB:	 95200
>[    2.953633] [drm] DM_PPLIB:	 104100
>[    2.953633] [drm] DM_PPLIB:	 110600
>[    2.953633] [drm] DM_PPLIB:	 116800
>[    2.953634] [drm] DM_PPLIB:	 120900
>[    2.953634] [drm] DM_PPLIB:	 128000
>[    2.953634] [drm] DM_PPLIB: Validation clocks:
>[    2.953635] [drm] DM_PPLIB:    engine_max_clock: 128000
>[    2.953635] [drm] DM_PPLIB:    memory_max_clock: 175000
>[    2.953635] [drm] DM_PPLIB:    level           : 0
>[    2.953636] [drm] DM_PPLIB: values for Memory clock
>[    2.953636] [drm] DM_PPLIB:	 30000
>[    2.953636] [drm] DM_PPLIB:	 100000
>[    2.953637] [drm] DM_PPLIB:	 175000
>[    2.953637] [drm] DM_PPLIB: Validation clocks:
>[    2.953637] [drm] DM_PPLIB:    engine_max_clock: 128000
>[    2.953637] [drm] DM_PPLIB:    memory_max_clock: 175000
>[    2.953638] [drm] DM_PPLIB:    level           : 0
>[    2.976224] [drm] Display Core initialized with v3.1.38!
>[    2.984237] [drm] DM_MST: Differing MST start on aconnector:         (ptrval) [id: 57]
>[    2.992271] [drm] DM_MST: Differing MST start on aconnector:         (ptrval) [id: 59]
>[    2.992521] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.992522] [drm] Driver supports precise vblank timestamp query.
>[    3.006119] usb 1-1.3.2: New USB device found, idVendor=093a, idProduct=2700, bcdDevice= 1.00
>[    3.006120] usb 1-1.3.2: New USB device strings: Mfr=16, Product=96, SerialNumber=0
>[    3.006121] usb 1-1.3.2: Product: USB Camera
>[    3.006122] usb 1-1.3.2: Manufacturer: PixArt Imaging Inc.
>[    3.024012] [drm] UVD and UVD ENC initialized successfully.
>[    3.060638] usb 2-2.3.3: new SuperSpeed USB device number 6 using xhci_hcd
>[    3.124971] [drm] VCE initialized successfully.
>[    3.125816] kfd kfd: Allocated 3969056 bytes on gart
>[    3.125836] Virtual CRAT table created for GPU
>[    3.125837] Parsing CRAT table with 1 nodes
>[    3.125843] Creating topology SYSFS entries
>[    3.125894] Topology: Add dGPU node [0x67df:0x1002]
>[    3.125949] kfd kfd: added device 1002:67df
>[    3.176719] usb 2-2.3.3: New USB device found, idVendor=0bda, idProduct=0307, bcdDevice= 1.63
>[    3.176722] usb 2-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.176723] usb 2-2.3.3: Product: USB3.0 Card Reader
>[    3.176724] usb 2-2.3.3: Manufacturer: Realtek
>[    3.176725] usb 2-2.3.3: SerialNumber: F12100005BDD
>[    3.193277] usb-storage 2-2.3.3:1.0: USB Mass Storage device detected
>[    3.193403] scsi host12: usb-storage 2-2.3.3:1.0
>[    3.193447] usbcore: registered new interface driver usb-storage
>[    3.195263] usbcore: registered new interface driver uas
>[    3.638955] [drm] Cannot find any crtc or sizes
>[    3.644314] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:07:00.0 on minor 0
>[    3.665384] [drm] DM_MST: added connector:         (ptrval) [id: 64] [master:         (ptrval)]
>[    3.673912] [drm] DM_MST: added connector:         (ptrval) [id: 67] [master:         (ptrval)]
>[    3.725172] random: crng init done
>[    3.725174] random: 7 urandom warning(s) missed due to ratelimiting
>[    3.874548] [drm] DM_MST: added connector: 000000005b420775 [id: 70] [master: 000000003b1c96a3]
>[    3.876029] [drm] fb mappable at 0xE0568000
>[    3.876030] [drm] vram apper at 0xE0000000
>[    3.876030] [drm] size 9216000
>[    3.876031] [drm] fb depth is 24
>[    3.876031] [drm]    pitch is 7680
>[    3.876063] fbcon: amdgpudrmfb (fb0) is primary device
>[    4.249962] Console: switching to colour frame buffer device 240x75
>[    4.250032] [drm] DM_MST: added connector: 000000000b91c98b [id: 92] [master: 00000000eb4a17e9]
>[    4.262819] scsi 12:0:0:0: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 6
>[    4.263087] sd 12:0:0:0: Attached scsi generic sg4 type 0
>[    4.268435] sd 12:0:0:0: [sde] Attached SCSI removable disk
>[    4.686937] amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
>[    4.697089] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    4.718209] zfs-generator: starting
>[    4.718302] zfs-generator: loading Dracut library from /lib/dracut-lib.sh
>[    5.012107] systemd-journald[321]: Received SIGTERM from PID 1 (systemd).
>[    5.027366] systemd: 19 output lines suppressed due to ratelimiting
>[    5.079946] kauditd_printk_skb: 39 callbacks suppressed
>[    5.079948] audit: type=1404 audit(1530206652.951:50): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    5.109369] SELinux: 32768 avtab hash slots, 114476 rules.
>[    5.120656] SELinux: 32768 avtab hash slots, 114476 rules.
>[    5.329564] SELinux:  8 users, 14 roles, 5117 types, 319 bools, 1 sens, 1024 cats
>[    5.329566] SELinux:  129 classes, 114476 rules
>[    5.333305] SELinux:  Permission name_connect in class sctp_socket not defined in policy.
>[    5.333306] SELinux:  Permission association in class sctp_socket not defined in policy.
>[    5.333344] SELinux:  Class bpf not defined in policy.
>[    5.333344] SELinux: the above unknown classes and permissions will be allowed
>[    5.333348] SELinux:  policy capability network_peer_controls=1
>[    5.333348] SELinux:  policy capability open_perms=1
>[    5.333349] SELinux:  policy capability extended_socket_class=1
>[    5.333349] SELinux:  policy capability always_check_network=0
>[    5.333349] SELinux:  policy capability cgroup_seclabel=1
>[    5.333350] SELinux:  policy capability nnp_nosuid_transition=1
>[    5.333350] SELinux:  Completing initialization.
>[    5.333350] SELinux:  Setting up existing superblocks.
>[    5.348252] audit: type=1403 audit(1530206653.220:51): policy loaded auid=4294967295 ses=4294967295
>[    5.350027] systemd[1]: Successfully loaded SELinux policy in 270.757ms.
>[    5.360263] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
>[    5.385977] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 20.370ms.
>[    5.388016] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    5.400554] systemd[1]: Detected architecture x86-64.
>[    5.402176] systemd[1]: Set hostname to <ryzen>.
>[    5.466535] systemd[1]: /usr/lib/systemd/system/rsyslog.service:21: Unknown lvalue 'LimitNOFILE' in section 'Install'
>[    5.541786] audit: type=1130 audit(1530203053.413:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.541793] audit: type=1131 audit(1530203053.413:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.542186] systemd[1]: Stopped Switch Root.
>[    5.542283] audit: type=1130 audit(1530203053.414:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.542291] audit: type=1131 audit(1530203053.414:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.542347] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
>[    5.542393] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
>[    5.542402] systemd[1]: Stopped Journal Service.
>[    5.542416] audit: type=1130 audit(1530203053.414:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.542423] audit: type=1131 audit(1530203053.414:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.543252] systemd[1]: Starting Journal Service...
>[    5.543981] systemd[1]: Mounting POSIX Message Queue File System...
>[    5.550053] audit: type=1305 audit(1530203053.422:58): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
>[    5.550664] systemd-journald[691]: File /run/log/journal/5b0db8b7f1af4fae80e1c1eaf34c0a19/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[    5.558043] EXT4-fs (sda5): re-mounted. Opts: (null)
>[    5.560932] audit: type=1130 audit(1530203053.432:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.574422] systemd-journald[691]: Received request to flush runtime journal from PID 1
>[    5.728033] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
>[    5.729692] acpi_cpufreq: overriding BIOS provided _PSD data
>[    5.738042] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    5.790675] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>[    5.790677] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
>[    5.793331] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
>[    5.793433] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
>[    5.793443] sp5100-tco sp5100-tco: Watchdog hardware is disabled
>[    5.798880] media: Linux media interface: v0.10
>[    5.805420] ccp 0000:08:00.2: enabling device (0000 -> 0002)
>[    5.805623] ccp 0000:08:00.2: psp initialization failed
>[    5.805625] ccp 0000:08:00.2: enabled
>[    5.814895] Linux video capture interface: v2.00
>[    5.850519] uvcvideo: Found UVC 1.00 device USB Camera (093a:2700)
>[    5.867270] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
>[    5.867272] snd_hda_intel 0000:07:00.1: Force to non-snoop mode
>[    5.867524] snd_hda_intel 0000:09:00.3: enabling device (0000 -> 0002)
>[    5.885544] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
>[    5.885657] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
>[    5.885720] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
>[    5.885780] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
>[    5.885842] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input10
>[    5.885907] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input11
>[    5.893531] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    5.893535] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    5.893536] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    5.893537] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[    5.893538] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x0
>[    5.893543] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[    5.893545] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
>[    5.893546] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
>[    5.893547] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
>[    5.896720] asus_wmi: ASUS WMI generic driver loaded
>[    5.898721] asus_wmi: Initialization: 0x0
>[    5.898760] asus_wmi: BIOS WMI version: 0.9
>[    5.898842] asus_wmi: SFUN value: 0x0
>[    5.899269] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
>[    5.899454] asus_wmi: Number of fans: 1
>[    5.909326] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input13
>[    5.909426] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input14
>[    5.909520] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input15
>[    5.909611] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input16
>[    5.909697] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input17
>[    5.911641] uvcvideo 1-1.3.2:1.0: Entity type for entity Extension 4 was not initialized!
>[    5.911643] uvcvideo 1-1.3.2:1.0: Entity type for entity Processing 3 was not initialized!
>[    5.911644] uvcvideo 1-1.3.2:1.0: Entity type for entity Camera 1 was not initialized!
>[    5.911725] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input18
>[    5.911831] usbcore: registered new interface driver uvcvideo
>[    5.911832] USB Video Class driver (1.1.1)
>[    5.928630] Adding 2097148k swap on /dev/sdd1.  Priority:1 extents:1 across:2097148k FS
>[    5.928803] Adding 2097148k swap on /dev/sdc1.  Priority:1 extents:1 across:2097148k FS
>[    5.935491] usb 1-1.3.2: current rate 15872 is different from the runtime rate 16000
>[    5.952490] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[    5.998557] kvm: Nested Virtualization enabled
>[    5.998561] kvm: Nested Paging enabled
>[    5.998561] SVM: Virtual VMLOAD VMSAVE supported
>[    5.998562] SVM: Virtual GIF supported
>[    6.001673] MCE: In-kernel MCE decoding enabled.
>[    6.005633] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.005634] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.020706] usbcore: registered new interface driver snd-usb-audio
>[    6.022668] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.022669] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.049557] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.049558] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.066744] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.066745] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.082817] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.082819] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.098830] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.098831] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.114894] EDAC amd64: Node 0: DRAM ECC disabled.
>[    6.114896] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>                (Note that use of the override may cause unknown side effects.)
>[    6.370898] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1017
>[    6.370941] usbcore: registered new interface driver usblp
>[    6.580943] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    6.582289] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    6.601235] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    6.709641] RPC: Registered named UNIX socket transport module.
>[    6.709642] RPC: Registered udp transport module.
>[    6.709643] RPC: Registered tcp transport module.
>[    6.709643] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    7.687093] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
>[    7.758758] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
>[    7.795652] r8169 0000:03:00.0 enp3s0: link down
>[    7.795655] r8169 0000:03:00.0 enp3s0: link down
>[    7.795790] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
>[    9.312979] fuse init (API version 7.26)
>[   11.877449] usblp0: removed
>[   12.643151] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1017
>[   13.731477] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[   13.794484] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[   14.062156] r8169 0000:03:00.0 enp3s0: link up
>[   14.062165] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
>[   27.140630] usb usb1-port4: Cannot enable. Maybe the USB cable is bad?
>[   28.092638] usb usb1-port4: Cannot enable. Maybe the USB cable is bad?
>[   28.092680] usb usb1-port4: attempt power cycle
>[   44.629516] [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:956
>[   44.629603] WARNING: CPU: 10 PID: 165 at drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:195 generic_reg_wait+0xe7/0x160 [amdgpu]
>[   44.629604] Modules linked in: fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc vfat fat usblp edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel eeepc_wmi asus_wmi sparse_keymap snd_hda_codec_realtek rfkill video wmi_bmof snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_usb_audio snd_hda_codec snd_hda_core snd_usbmidi_lib snd_rawmidi uvcvideo snd_hwdep snd_seq videobuf2_vmalloc snd_seq_device videobuf2_memops
>[   44.629631]  videobuf2_v4l2 videobuf2_common snd_pcm videodev ccp snd_timer media snd sp5100_tco k10temp i2c_piix4 soundcore shpchp pinctrl_amd gpio_amdpt gpio_generic acpi_cpufreq wmi binfmt_misc uas usb_storage amdkfd amd_iommu_v2 amdgpu chash i2c_algo_bit gpu_sched drm_kms_helper ttm drm crc32c_intel r8169 serio_raw mii i2c_dev
>[   44.629648] CPU: 10 PID: 165 Comm: kworker/10:1 Not tainted 4.17.2-200.fc28.x86_64 #1
>[   44.629649] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018
>[   44.629665] Workqueue: events drm_mode_rmfb_work_fn [drm]
>[   44.629716] RIP: 0010:generic_reg_wait+0xe7/0x160 [amdgpu]
>[   44.629717] RSP: 0018:ffffb2a8c2f9fa00 EFLAGS: 00010297
>[   44.629719] RAX: 0000000000000000 RBX: 000000000000000a RCX: 0000000000000000
>[   44.629720] RDX: 0000000000000000 RSI: ffff9a5f9ee96938 RDI: ffff9a5f9ee96938
>[   44.629721] RBP: ffff9a5f8c5c6b80 R08: 0000000000000005 R09: 0000000000010200
>[   44.629721] R10: 0000000000000000 R11: ffffffff949981ad R12: 0000000000000bb9
>[   44.629722] R13: 0000000000004fa4 R14: 0000000000010000 R15: 0000000000000000
>[   44.629724] FS:  0000000000000000(0000) GS:ffff9a5f9ee80000(0000) knlGS:0000000000000000
>[   44.629725] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[   44.629725] CR2: 0000000000c86038 CR3: 00000003e27fe000 CR4: 00000000003406e0
>[   44.629726] Call Trace:
>[   44.629786]  dce110_stream_encoder_dp_blank+0x12c/0x1a0 [amdgpu]
>[   44.629839]  core_link_disable_stream+0x54/0x270 [amdgpu]
>[   44.629891]  dce110_reset_hw_ctx_wrap+0xb9/0x1b0 [amdgpu]
>[   44.629944]  dce110_apply_ctx_to_hw+0x52/0xa30 [amdgpu]
>[   44.629999]  ? dce_pipe_control_lock+0x184/0x1f0 [amdgpu]
>[   44.630050]  dc_commit_state+0x2f5/0x590 [amdgpu]
>[   44.630107]  amdgpu_dm_atomic_commit_tail+0x351/0xcf0 [amdgpu]
>[   44.630112]  ? __wake_up_common_lock+0x89/0xc0
>[   44.630114]  ? _cond_resched+0x15/0x30
>[   44.630117]  ? wait_for_completion_timeout+0x3a/0x190
>[   44.630118]  ? wait_for_completion_interruptible+0x35/0x1d0
>[   44.630120]  ? _cond_resched+0x15/0x30
>[   44.630174]  ? dm_plane_helper_cleanup_fb+0x120/0x120 [amdgpu]
>[   44.630182]  commit_tail+0x3d/0x70 [drm_kms_helper]
>[   44.630190]  drm_atomic_helper_commit+0x103/0x110 [drm_kms_helper]
>[   44.630204]  drm_framebuffer_remove+0x2cc/0x3e0 [drm]
>[   44.630220]  drm_mode_rmfb_work_fn+0x4f/0x60 [drm]
>[   44.630223]  process_one_work+0x187/0x340
>[   44.630225]  worker_thread+0x1c7/0x380
>[   44.630228]  ? pwq_unbound_release_workfn+0xd0/0xd0
>[   44.630229]  kthread+0x112/0x130
>[   44.630231]  ? kthread_create_worker_on_cpu+0x70/0x70
>[   44.630233]  ret_from_fork+0x22/0x40
>[   44.630235] Code: 8b 44 24 58 8b 54 24 48 89 de 44 89 4c 24 08 48 8b 4c 24 50 48 c7 c7 00 30 66 c0 e8 84 32 e3 ff 83 7d 20 01 44 8b 4c 24 08 74 02 <0f> 0b 48 83 c4 10 44 89 c8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 
>[   44.630263] ---[ end trace ff14ca7b1fa32503 ]---
>[   45.165549] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[   45.194610] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[   49.128914] usb 1-1.3.2: current rate 47872 is different from the runtime rate 48000
>[   54.820457] usb usb1-port4: Cannot enable. Maybe the USB cable is bad?

Actions: View

Attachments on bug 1596342: 1455382