Attachment 1455411 Details for Bug 1582407 – Output from iw phy0 info

Output from iw phy0 info

iw phy0 info_output (text/plain), 11.64 KB, created by Brendan Shephard on 2018-06-29 00:51:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brendan Shephard

Created: 2018-06-29 00:51:08 UTC

Size: 11.64 KB

patch

obsolete

>[shep@fedora-work ansible] $ iw phy0 info
>Wiphy phy0
>        max # scan SSIDs: 20
>        max scan IEs length: 422 bytes
>        max # sched scan SSIDs: 20
>        max # match sets: 11
>        max # scan plans: 2
>        max scan plan interval: 65535
>        max scan plan iterations: 254
>        Retry short limit: 7
>        Retry long limit: 4
>        Coverage class: 0 (up to 0m)
>        Device supports RSN-IBSS.
>        Device supports AP-side u-APSD.
>        Device supports T-DLS.
>        Supported Ciphers:
>                * WEP40 (00-0f-ac:1)
>                * WEP104 (00-0f-ac:5)
>                * TKIP (00-0f-ac:2)
>                * CCMP-128 (00-0f-ac:4)
>                * CMAC (00-0f-ac:6)
>        Available Antennas: TX 0 RX 0
>        Supported interface modes:
>                 * IBSS
>                 * managed
>                 * AP
>                 * AP/VLAN
>                 * monitor
>                 * P2P-client
>                 * P2P-GO
>                 * P2P-device
>        Band 1:
>                Capabilities: 0x11ef
>                        RX LDPC
>                        HT20/HT40
>                        SM Power Save disabled
>                        RX HT20 SGI
>                        RX HT40 SGI
>                        TX STBC
>                        RX STBC 1-stream
>                        Max AMSDU length: 3839 bytes
>                        DSSS/CCK HT40
>                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>                Minimum RX AMPDU time spacing: 4 usec (0x05)
>                HT Max RX data rate: 300 Mbps
>                HT TX/RX MCS rate indexes supported: 0-15
>                Bitrates (non-HT):
>                        * 1.0 Mbps
>                        * 2.0 Mbps (short preamble supported)
>                        * 5.5 Mbps (short preamble supported)
>                        * 11.0 Mbps (short preamble supported)
>                        * 6.0 Mbps
>                        * 9.0 Mbps
>                        * 12.0 Mbps
>                        * 18.0 Mbps
>                        * 24.0 Mbps
>                        * 36.0 Mbps
>                        * 48.0 Mbps
>                        * 54.0 Mbps
>                Frequencies:
>                        * 2412 MHz [1] (22.0 dBm)
>                        * 2417 MHz [2] (22.0 dBm)
>                        * 2422 MHz [3] (22.0 dBm)
>                        * 2427 MHz [4] (22.0 dBm)
>                        * 2432 MHz [5] (22.0 dBm)
>                        * 2437 MHz [6] (22.0 dBm)
>                        * 2442 MHz [7] (22.0 dBm)
>                        * 2447 MHz [8] (22.0 dBm)
>                        * 2452 MHz [9] (22.0 dBm)
>                        * 2457 MHz [10] (22.0 dBm)
>                        * 2462 MHz [11] (22.0 dBm)
>                        * 2467 MHz [12] (22.0 dBm)
>                        * 2472 MHz [13] (22.0 dBm)
>                        * 2484 MHz [14] (disabled)
>        Band 2:
>                Capabilities: 0x11ef
>                        RX LDPC
>                        HT20/HT40
>                        SM Power Save disabled
>                        RX HT20 SGI
>                        RX HT40 SGI
>                        TX STBC
>                        RX STBC 1-stream
>                        Max AMSDU length: 3839 bytes
>                        DSSS/CCK HT40
>                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>                Minimum RX AMPDU time spacing: 4 usec (0x05)
>                HT Max RX data rate: 300 Mbps
>                HT TX/RX MCS rate indexes supported: 0-15
>                VHT Capabilities (0x038071b0):
>                        Max MPDU length: 3895
>                        Supported Channel Width: neither 160 nor 80+80
>                        RX LDPC
>                        short GI (80 MHz)
>                        TX STBC
>                        SU Beamformee
>                VHT RX MCS set:
>                        1 streams: MCS 0-9
>                        2 streams: MCS 0-9
>                        3 streams: not supported
>                        4 streams: not supported
>                        5 streams: not supported
>                        6 streams: not supported
>                        7 streams: not supported
>                        8 streams: not supported
>                VHT RX highest supported: 0 Mbps
>                VHT TX MCS set:
>                        1 streams: MCS 0-9
>                        2 streams: MCS 0-9
>                        3 streams: not supported
>                        4 streams: not supported
>                        5 streams: not supported
>                        6 streams: not supported
>                        7 streams: not supported
>                        8 streams: not supported
>                VHT TX highest supported: 0 Mbps
>                Bitrates (non-HT):
>                        * 6.0 Mbps
>                        * 9.0 Mbps
>                        * 12.0 Mbps
>                        * 18.0 Mbps
>                        * 24.0 Mbps
>                        * 36.0 Mbps
>                        * 48.0 Mbps
>                        * 54.0 Mbps
>                Frequencies:
>                        * 5180 MHz [36] (22.0 dBm) (no IR)
>                        * 5200 MHz [40] (22.0 dBm) (no IR)
>                        * 5220 MHz [44] (22.0 dBm) (no IR)
>                        * 5240 MHz [48] (22.0 dBm) (no IR)
>                        * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
>                        * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
>                        * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
>                        * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
>                        * 5340 MHz [68] (disabled)
>                        * 5360 MHz [72] (disabled)
>                        * 5380 MHz [76] (disabled)
>                        * 5400 MHz [80] (disabled)
>                        * 5420 MHz [84] (disabled)
>                        * 5440 MHz [88] (disabled)
>                        * 5460 MHz [92] (disabled)
>                        * 5480 MHz [96] (disabled)
>                        * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
>                        * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
>                        * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
>                        * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
>                        * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
>                        * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
>                        * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
>                        * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
>                        * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
>                        * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
>                        * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
>                        * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
>                        * 5745 MHz [149] (22.0 dBm)
>                        * 5765 MHz [153] (22.0 dBm)
>                        * 5785 MHz [157] (22.0 dBm)
>                        * 5805 MHz [161] (22.0 dBm)
>                        * 5825 MHz [165] (22.0 dBm) (no IR)
>                        * 5845 MHz [169] (disabled)
>                        * 5865 MHz [173] (disabled)
>                        * 5885 MHz [177] (disabled)
>                        * 5905 MHz [181] (disabled)
>        Supported commands:
>                 * new_interface
>                 * set_interface
>                 * new_key
>                 * start_ap
>                 * new_station
>                 * new_mpath
>                 * set_mesh_config
>                 * set_bss
>                 * authenticate
>                 * associate
>                 * deauthenticate
>                 * disassociate
>                 * join_ibss
>                 * join_mesh
>                 * remain_on_channel
>                 * set_tx_bitrate_mask
>                 * frame
>                 * frame_wait_cancel
>                 * set_wiphy_netns
>                 * set_channel
>                 * set_wds_peer
>                 * tdls_mgmt
>                 * tdls_oper
>                 * start_sched_scan
>                 * probe_client
>                 * set_noack_map
>                 * register_beacons
>                 * start_p2p_device
>                 * set_mcast_rate
>                 * connect
>                 * disconnect
>                 * channel_switch
>                 * set_qos_map
>                 * add_tx_ts
>                 * set_multicast_to_unicast
>        Supported TX frame types:
>                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>        Supported RX frame types:
>                 * IBSS: 0x40 0xb0 0xc0 0xd0
>                 * managed: 0x40 0xd0
>                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * mesh point: 0xb0 0xc0 0xd0
>                 * P2P-client: 0x40 0xd0
>                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * P2P-device: 0x40 0xd0
>        WoWLAN support:
>                 * wake up on disconnect
>                 * wake up on magic packet
>                 * wake up on pattern match, up to 20 patterns of 16-128 bytes,
>                   maximum packet offset 0 bytes
>                 * can do GTK rekeying
>                 * wake up on GTK rekey failure
>                 * wake up on EAP identity request
>                 * wake up on 4-way handshake
>                 * wake up on rfkill release
>                 * wake up on network detection, up to 11 match sets
>        software interface modes (can always be added):
>                 * AP/VLAN
>                 * monitor
>        valid interface combinations:
>                 * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
>                   total <= 3, #channels <= 2
>        HT Capability overrides:
>                 * MCS: ff ff ff ff ff ff ff ff ff ff
>                 * maximum A-MSDU length
>                 * supported channel width
>                 * short GI for 40 MHz
>                 * max A-MPDU length exponent
>                 * min MPDU start spacing
>        Device supports TX status socket option.
>        Device supports HT-IBSS.
>        Device supports SAE with AUTHENTICATE command
>        Device supports low priority scan.
>        Device supports scan flush.
>        Device supports per-vif TX power setting
>        P2P GO supports CT window setting
>        P2P GO supports opportunistic powersave setting
>        Driver supports full state transitions for AP/GO clients
>        Driver supports a userspace MPM
>        Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
>        Device adds DS IE to probe requests
>        Device can update TPC Report IE
>        Device supports static SMPS
>        Device supports dynamic SMPS
>        Device supports WMM-AC admission (TSPECs)
>        Device supports configuring vdev MAC-addr on create.
>        Device supports TDLS channel switching

Actions: View

Attachments on bug 1582407: 1441444 | 1448582 | 1448934 | 1453207 | 1455411