Attachment 1456162 Details for Bug 1597000 – dmesg

dmesg

dmesg.log (text/plain), 70.83 KB, created by deepaksrivastav on 2018-07-03 09:54:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: deepaksrivastav

Created: 2018-07-03 09:54:27 UTC

Size: 70.83 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
>[    0.000000] Linux version 4.17.3-200.fc28.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #1 SMP Tue Jun 26 14:17:07 UTC 2018
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.17.3-200.fc28.x86_64 root=UUID=633e25c3-cdff-49b6-9d6f-9338de78d64f ro rhgb quiet acpi_backlight=vendor LANG=en_US.UTF-8
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c4017fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c4018000-0x00000000c4219fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c421a000-0x00000000da64efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000da64f000-0x00000000dce3efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000dce3f000-0x00000000dcf9efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] e820: update [mem 0xc52b1018-0xc52bc857] usable ==> usable
>[    0.000000] e820: update [mem 0xc52b1018-0xc52bc857] usable ==> usable
>[    0.000000] e820: update [mem 0xc52a0018-0xc52b0057] usable ==> usable
>[    0.000000] e820: update [mem 0xc52a0018-0xc52b0057] usable ==> usable
>[    0.000000] e820: update [mem 0xc528f018-0xc529f057] usable ==> usable
>[    0.000000] e820: update [mem 0xc528f018-0xc529f057] usable ==> usable
>[    0.000000] extended physical RAM map:
>[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable
>[    0.000000] reserve setup_data: [mem 0x000000000008c000-0x00000000000bffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4017fff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c4018000-0x00000000c4219fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000c421a000-0x00000000c528f017] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c528f018-0x00000000c529f057] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c529f058-0x00000000c52a0017] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c52a0018-0x00000000c52b0057] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c52b0058-0x00000000c52b1017] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c52b1018-0x00000000c52bc857] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c52bc858-0x00000000da64efff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000da64f000-0x00000000dce3efff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000dce3f000-0x00000000dcf9efff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
>[    0.000000] reserve setup_data: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041e5fffff] usable
>[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
>[    0.000000] efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdca53000 
>[    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
>[    0.000000] efi: mem47: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
>[    0.000000] efi: mem48: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
>[    0.000000] efi: mem49: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
>[    0.000000] efi: mem50: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
>[    0.000000] efi: mem51: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
>[    0.000000] efi: Removing 5 invalid memory map entries.
>[    0.000000] secureboot: Secure boot disabled
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: FUJITSU LIFEBOOK E754/FJNB26F, BIOS Version 1.20 02/03/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
>[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [        (ptrval)] 64000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x2cfaa3000, 0x2cfaa3fff] PGTABLE
>[    0.000000] BRK [0x2cfaa4000, 0x2cfaa4fff] PGTABLE
>[    0.000000] BRK [0x2cfaa5000, 0x2cfaa5fff] PGTABLE
>[    0.000000] BRK [0x2cfaa6000, 0x2cfaa6fff] PGTABLE
>[    0.000000] BRK [0x2cfaa7000, 0x2cfaa7fff] PGTABLE
>[    0.000000] BRK [0x2cfaa8000, 0x2cfaa8fff] PGTABLE
>[    0.000000] BRK [0x2cfaa9000, 0x2cfaa9fff] PGTABLE
>[    0.000000] BRK [0x2cfaaa000, 0x2cfaaafff] PGTABLE
>[    0.000000] BRK [0x2cfaab000, 0x2cfaabfff] PGTABLE
>[    0.000000] BRK [0x2cfaac000, 0x2cfaacfff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x3cbf6000-0x3e152fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 FUJ   )
>[    0.000000] ACPI: XSDT 0x00000000DCFFE170 0000B4 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: FACP 0x00000000DCFF8000 00010C (v05 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: DSDT 0x00000000DCFE8000 00CD76 (v02 FUJ    FJNB26F  01140000 INTL 20120711)
>[    0.000000] ACPI: FACS 0x00000000DCF9C000 000040
>[    0.000000] ACPI: SSDT 0x00000000DCFFD000 0008FF (v01 FUJ    SataAhci 00000001 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFFC000 0002DF (v01 FUJ    BayAhci2 00000001 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFFB000 000106 (v02 FUJ    DockSsdt 00000001 INTL 20120711)
>[    0.000000] ACPI: HPET 0x00000000DCFF7000 000038 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: APIC 0x00000000DCFF6000 000098 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: MCFG 0x00000000DCFF5000 00003C (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: SSDT 0x00000000DCFE7000 000539 (v01 FUJ    Cpu0Ist  01140000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFE6000 000B37 (v01 FUJ    CpuPm    01140000 INTL 20120711)
>[    0.000000] ACPI: UEFI 0x00000000DCFE5000 000042 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: TCPA 0x00000000DCFE4000 000032 (v02 PTL     CRESTLN 06040000      00005A52)
>[    0.000000] ACPI: MSDM 0x00000000DCEE6000 000055 (v03 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: ASF! 0x00000000DCFFA000 0000A5 (v32 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: UEFI 0x00000000DCFE3000 00003E (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: FPDT 0x00000000DCFE2000 000064 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: SLIC 0x00000000DCFE1000 000176 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: UEFI 0x00000000DCFE0000 0001B6 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: BGRT 0x00000000DCFDF000 000038 (v01 FUJ    PC       01140000 FUJ  00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x41e5d5000-0x41e5fffff]
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041e5fffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c4017fff]
>[    0.000000]   node   0: [mem 0x00000000c421a000-0x00000000da64efff]
>[    0.000000]   node   0: [mem 0x00000000dcfff000-0x00000000dcffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041e5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
>[    0.000000] On node 0 totalpages: 4164056
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 71 pages reserved
>[    0.000000]   DMA zone: 3978 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13906 pages used for memmap
>[    0.000000]   DMA32 zone: 889934 pages, LIFO batch:31
>[    0.000000]   Normal zone: 51096 pages used for memmap
>[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 100 pages
>[    0.000000] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc4018000-0xc4219fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc528f000-0xc528ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc529f000-0xc529ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc52a0000-0xc52a0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc52b0000-0xc52b0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc52b1000-0xc52b1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xc52bc000-0xc52bcfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda64f000-0xdce3efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdce3f000-0xdcf9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
>[    0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x558 with crng_init=0
>[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
>[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4098919
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.3-200.fc28.x86_64 root=UUID=633e25c3-cdff-49b6-9d6f-9338de78d64f ro rhgb quiet acpi_backlight=vendor LANG=en_US.UTF-8
>[    0.000000] Memory: 16064404K/16656224K available (12300K kernel code, 1611K rwdata, 4020K rodata, 2148K init, 1336K bss, 591820K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] ftrace: allocating 37684 entries in 148 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
>[    0.000000] 	Tasks RCU enabled.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS: 65792, nr_irqs: 488, preallocated irqs: 16
>[    0.000000] 	Offload RCU callbacks from CPUs: (none).
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180313
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.005000] tsc: Fast TSC calibration using PIT
>[    0.006000] tsc: Detected 2294.907 MHz processor
>[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x211469f6111, max_idle_ns: 440795238746 ns
>[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.81 BogoMIPS (lpj=2294907)
>[    0.006000] pid_max: default: 32768 minimum: 301
>[    0.007263] Security Framework initialized
>[    0.007264] Yama: becoming mindful.
>[    0.007269] SELinux:  Initializing.
>[    0.007290] SELinux:  Starting in permissive mode
>[    0.009921] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.011149] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.011197] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.011236] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.011440] CPU: Physical Processor ID: 0
>[    0.011440] CPU: Processor Core ID: 0
>[    0.011445] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.011446] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.011450] mce: CPU supports 9 MCE banks
>[    0.011459] CPU0: Thermal monitoring enabled (TM1)
>[    0.011474] process: using mwait in idle threads
>[    0.011476] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.011477] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.011478] Spectre V2 : Mitigation: Full generic retpoline
>[    0.011479] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.011479] Spectre V2 : Enabling Restricted Speculation for firmware calls
>[    0.011480] Speculative Store Bypass: Vulnerable
>[    0.016721] Freeing SMP alternatives memory: 36K
>[    0.024816] TSC deadline timer enabled
>[    0.024820] smpboot: CPU0: Intel(R) Core(TM) i7-4712MQ CPU @ 2.30GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.024903] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.024943] ... version:                3
>[    0.024944] ... bit width:              48
>[    0.024944] ... generic registers:      4
>[    0.024945] ... value mask:             0000ffffffffffff
>[    0.024946] ... max period:             00007fffffffffff
>[    0.024946] ... fixed-purpose events:   3
>[    0.024947] ... event mask:             000000070000000f
>[    0.024981] Hierarchical SRCU implementation.
>[    0.025304] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.025319] smp: Bringing up secondary CPUs ...
>[    0.025401] x86: Booting SMP configuration:
>[    0.025402] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.033481] smp: Brought up 1 node, 8 CPUs
>[    0.033481] smpboot: Max logical packages: 1
>[    0.033481] smpboot: Total of 8 processors activated (36718.51 BogoMIPS)
>[    0.034439] devtmpfs: initialized
>[    0.034439] x86/mm: Memory block size: 128MB
>[    0.035583] PM: Registering ACPI NVS region [mem 0xdce3f000-0xdcf9efff] (1441792 bytes)
>[    0.035583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.035583] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.035583] pinctrl core: initialized pinctrl subsystem
>[    0.035583] RTC time: 11:49:33, date: 07/03/18
>[    0.035583] NET: Registered protocol family 16
>[    0.036081] audit: initializing netlink subsys (disabled)
>[    0.036088] audit: type=2000 audit(1530618573.036:1): state=initialized audit_enabled=0 res=1
>[    0.036088] cpuidle: using governor menu
>[    0.036088] ACPI: bus type PCI registered
>[    0.036088] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.036145] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.036154] PCI: not using MMCONFIG
>[    0.036154] PCI: Using configuration type 1 for base access
>[    0.036154] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.038009] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.038010] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.038033] cryptd: max_cpu_qlen set to 1000
>[    0.038099] ACPI: Added _OSI(Module Device)
>[    0.038100] ACPI: Added _OSI(Processor Device)
>[    0.038101] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.038102] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.038103] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.051933] ACPI: 6 ACPI AML tables successfully acquired and loaded
>[    0.054022] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.054215] ACPI: Dynamic OEM Table Load:
>[    0.054215] ACPI: SSDT 0xFFFF9BAF4BA04000 0011E5 (v02 FUJ    Win8Ssdt 00000001 INTL 20120711)
>[    0.161339] ACPI: Dynamic OEM Table Load:
>[    0.161346] ACPI: SSDT 0xFFFF9BAF4B9F9800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.161842] ACPI: Dynamic OEM Table Load:
>[    0.161849] ACPI: SSDT 0xFFFF9BAF4B9F9000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.162338] ACPI: Dynamic OEM Table Load:
>[    0.162343] ACPI: SSDT 0xFFFF9BAF4B46C600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.164056] ACPI: EC: EC started
>[    0.164057] ACPI: EC: interrupt blocked
>[    0.164084] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
>[    0.164086] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.164087] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
>[    0.164088] ACPI: Interpreter enabled
>[    0.164126] ACPI: (supports S0 S3 S4 S5)
>[    0.164127] ACPI: Using IOAPIC for interrupt routing
>[    0.164157] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.164578] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.164585] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.164797] ACPI: Enabled 11 GPEs in block 00 to 3F
>[    0.170417] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
>[    0.171517] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
>[    0.172182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.172186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.172321] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.172755] PCI host bridge to bus 0000:00
>[    0.172758] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.172759] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.172760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.172762] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
>[    0.172763] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.172772] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
>[    0.172864] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
>[    0.172875] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>[    0.172881] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.172886] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.172897] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.172971] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.172980] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
>[    0.173092] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.173114] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
>[    0.173174] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.173251] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.173273] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063900f 64bit]
>[    0.173337] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.173409] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
>[    0.173427] pci 0000:00:16.3: reg 0x10: [io  0x30b0-0x30b7]
>[    0.173436] pci 0000:00:16.3: reg 0x14: [mem 0xf0640000-0xf0640fff]
>[    0.173566] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
>[    0.173585] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
>[    0.173594] pci 0000:00:19.0: reg 0x14: [mem 0xf063f000-0xf063ffff]
>[    0.173602] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.173659] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.173736] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.173758] pci 0000:00:1a.0: reg 0x10: [mem 0xf063e000-0xf063e3ff]
>[    0.173839] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.173919] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.173940] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
>[    0.174010] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.174088] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.174162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.174244] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
>[    0.174315] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.174397] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
>[    0.174469] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.174550] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.174571] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
>[    0.174654] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.174734] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
>[    0.174909] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
>[    0.174926] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.174933] pci 0000:00:1f.2: reg 0x14: [io  0x30bc-0x30bf]
>[    0.174941] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.174949] pci 0000:00:1f.2: reg 0x1c: [io  0x30b8-0x30bb]
>[    0.174956] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.174964] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
>[    0.175000] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.175075] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.175094] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
>[    0.175114] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.175233] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.175348] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
>[    0.175429] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
>[    0.175689] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.175877] pci 0000:00:1c.5: PCI bridge to [bus 02]
>[    0.175882] pci 0000:00:1c.5:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.175996] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
>[    0.176073] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0400fff]
>[    0.176399] pci 0000:03:00.0: supports D1 D2
>[    0.176401] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.176585] pci 0000:00:1c.7: PCI bridge to [bus 03]
>[    0.176591] pci 0000:00:1c.7:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.177398] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.177479] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
>[    0.177558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.177635] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.177713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.177790] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.177869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
>[    0.177947] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.178356] ACPI: EC: interrupt unblocked
>[    0.178370] ACPI: EC: event unblocked
>[    0.178376] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.178377] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.178401] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.178401] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.178401] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.178401] vgaarb: loaded
>[    0.178401] SCSI subsystem initialized
>[    0.178401] libata version 3.00 loaded.
>[    0.178401] ACPI: bus type USB registered
>[    0.178401] usbcore: registered new interface driver usbfs
>[    0.178401] usbcore: registered new interface driver hub
>[    0.178401] usbcore: registered new device driver usb
>[    0.178401] pps_core: LinuxPPS API ver. 1 registered
>[    0.178401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.178401] PTP clock support registered
>[    0.178401] EDAC MC: Ver: 3.0.0
>[    0.178401] Registered efivars operations
>[    0.187524] PCI: Using ACPI for IRQ routing
>[    0.188952] PCI: pci_cache_line_size set to 64 bytes
>[    0.189030] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.189031] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
>[    0.189032] e820: reserve RAM buffer [mem 0xc4018000-0xc7ffffff]
>[    0.189033] e820: reserve RAM buffer [mem 0xc528f018-0xc7ffffff]
>[    0.189034] e820: reserve RAM buffer [mem 0xc52a0018-0xc7ffffff]
>[    0.189035] e820: reserve RAM buffer [mem 0xc52b1018-0xc7ffffff]
>[    0.189036] e820: reserve RAM buffer [mem 0xda64f000-0xdbffffff]
>[    0.189037] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
>[    0.189038] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
>[    0.189116] NetLabel: Initializing
>[    0.189117] NetLabel:  domain hash size = 128
>[    0.189117] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.189130] NetLabel:  unlabeled traffic allowed by default
>[    0.189133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.189133] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.191017] clocksource: Switched to clocksource tsc-early
>[    0.203563] VFS: Disk quotas dquot_6.6.0
>[    0.203578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.203636] pnp: PnP ACPI init
>[    0.203838] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.203840] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.203841] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.203843] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.203845] system 00:00: [mem 0xf8000000-0xfbffffff] could not be reserved
>[    0.203846] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.203848] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.203849] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.203851] system 00:00: [mem 0xff000000-0xffffffff] has been reserved
>[    0.203852] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.203854] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
>[    0.203855] system 00:00: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.203857] system 00:00: [mem 0xdfa10000-0xdfa1ffff] has been reserved
>[    0.203862] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204247] system 00:01: [io  0x04d0-0x04d1] has been reserved
>[    0.204249] system 00:01: [io  0x0800-0x087f] has been reserved
>[    0.204251] system 00:01: [io  0x1640-0x164f] has been reserved
>[    0.204252] system 00:01: [io  0x1800-0x187f] has been reserved
>[    0.204254] system 00:01: [io  0x1880-0x18ff] has been reserved
>[    0.204255] system 00:01: [io  0xf800-0xf87f] has been reserved
>[    0.204257] system 00:01: [io  0xf880-0xf8ff] has been reserved
>[    0.204258] system 00:01: [io  0xfc00-0xfc7f] has been reserved
>[    0.204260] system 00:01: [io  0xfc80-0xfcff] has been reserved
>[    0.204261] system 00:01: [io  0xfd00-0xfd7f] has been reserved
>[    0.204263] system 00:01: [io  0x2000-0x2003] has been reserved
>[    0.204264] system 00:01: [io  0x2100-0x217f] has been reserved
>[    0.204266] system 00:01: [io  0x2180-0x21ff] has been reserved
>[    0.204268] system 00:01: [io  0x0604-0x0607] has been reserved
>[    0.204269] system 00:01: [io  0x0600-0x0603] has been reserved
>[    0.204273] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204337] pnp 00:02: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
>[    0.204371] pnp 00:03: Plug and Play ACPI device, IDs SYN1f08 PNP0f13 (active)
>[    0.204434] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.204565] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.204569] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.204756] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>[    0.205413] pnp: PnP ACPI: found 7 devices
>[    0.211014] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.211062] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.211073] pci 0000:00:1c.5: PCI bridge to [bus 02]
>[    0.211078] pci 0000:00:1c.5:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.211085] pci 0000:00:1c.7: PCI bridge to [bus 03]
>[    0.211090] pci 0000:00:1c.7:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.211099] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.211100] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.211102] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.211103] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
>[    0.211105] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
>[    0.211106] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
>[    0.211199] NET: Registered protocol family 2
>[    0.211331] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
>[    0.211383] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.211538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.211650] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.211688] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.211729] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.211816] NET: Registered protocol family 1
>[    0.211827] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.211897] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.211898] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.212249] PCI: CLS 64 bytes, default 64
>[    0.212283] Unpacking initramfs...
>[    0.538892] Freeing initrd memory: 21876K
>[    0.538900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.538903] software IO TLB [mem 0xcdf8b000-0xd1f8b000] (64MB) mapped at [        (ptrval)-        (ptrval)]
>[    0.540079] Initialise system trusted keyrings
>[    0.540088] Key type blacklist registered
>[    0.540115] workingset: timestamp_bits=36 max_order=22 bucket_order=0
>[    0.541290] zbud: loaded
>[    0.541753] pstore: using deflate compression
>[    0.541806] SELinux:  Registering netfilter hooks
>[    0.706286] alg: No test for 842 (842-generic)
>[    0.706304] alg: No test for 842 (842-scomp)
>[    0.711409] NET: Registered protocol family 38
>[    0.711412] Key type asymmetric registered
>[    0.711412] Asymmetric key parser 'x509' registered
>[    0.711447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
>[    0.711481] io scheduler noop registered
>[    0.711482] io scheduler deadline registered
>[    0.711522] io scheduler cfq registered (default)
>[    0.711523] io scheduler mq-deadline registered
>[    0.711590] atomic64_test: passed for x86-64 platform with CX8 and with SSE
>[    0.712070] efifb: probing for efifb
>[    0.712084] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
>[    0.712085] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    0.712086] efifb: scrolling: redraw
>[    0.712087] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.712167] Console: switching to colour frame buffer device 240x67
>[    0.716160] fb0: EFI VGA frame buffer device
>[    0.716169] intel_idle: MWAIT substates: 0x42120
>[    0.716170] intel_idle: v0.4.1 model 0x3C
>[    0.716447] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.716613] ACPI: AC Adapter [AC] (on-line)
>[    0.716669] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.716679] ACPI: Lid Switch [LID]
>[    0.716708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    0.716714] ACPI: Power Button [PWRB]
>[    0.716738] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    0.716743] ACPI: Sleep Button [SLPB]
>[    0.717233] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    0.738829] 0000:00:16.3: ttyS4 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
>[    0.739321] Non-volatile memory driver v1.3
>[    0.739355] Linux agpgart interface v0.103
>[    0.749072] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
>[    0.776815] random: fast init done
>[    0.789072] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[    0.789104] tpm tpm0: TPM is disabled/deactivated (0x7)
>[    0.798098] tpm tpm0: A TPM error (7) occurred attempting get random
>[    0.799079] ahci 0000:00:1f.2: version 3.0
>[    0.799245] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.799272] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
>[    0.799274] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst 
>[    0.803843] ACPI: Battery Slot [CMB1] (battery present)
>[    0.803949] ACPI: Battery Slot [CMB2] (battery absent)
>[    0.805639] scsi host0: ahci
>[    0.805917] scsi host1: ahci
>[    0.806012] scsi host2: ahci
>[    0.806132] scsi host3: ahci
>[    0.806219] scsi host4: ahci
>[    0.806292] scsi host5: ahci
>[    0.806318] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 24
>[    0.806319] ata2: DUMMY
>[    0.806321] ata3: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c200 irq 24
>[    0.806322] ata4: DUMMY
>[    0.806325] ata5: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c300 irq 24
>[    0.806325] ata6: DUMMY
>[    0.806394] libphy: Fixed MDIO Bus: probed
>[    0.806455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.806459] ehci-pci: EHCI PCI platform driver
>[    0.806603] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.806633] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.806645] ehci-pci 0000:00:1a.0: debug port 2
>[    0.810548] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.810559] ehci-pci 0000:00:1a.0: irq 18, io mem 0xf063e000
>[    0.817063] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.817114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
>[    0.817115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.817117] usb usb1: Product: EHCI Host Controller
>[    0.817118] usb usb1: Manufacturer: Linux 4.17.3-200.fc28.x86_64 ehci_hcd
>[    0.817120] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.817322] hub 1-0:1.0: USB hub found
>[    0.817328] hub 1-0:1.0: 3 ports detected
>[    0.817893] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.817946] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.817958] ehci-pci 0000:00:1d.0: debug port 2
>[    0.821868] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.821880] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
>[    0.828065] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.828125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
>[    0.828127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.828128] usb usb2: Product: EHCI Host Controller
>[    0.828129] usb usb2: Manufacturer: Linux 4.17.3-200.fc28.x86_64 ehci_hcd
>[    0.828131] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.828328] hub 2-0:1.0: USB hub found
>[    0.828334] hub 2-0:1.0: 3 ports detected
>[    0.828773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.828777] ohci-pci: OHCI PCI platform driver
>[    0.828787] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.828878] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    0.828880] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    0.828916] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.828970] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.830036] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    0.830042] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.830169] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
>[    0.830170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.830172] usb usb3: Product: xHCI Host Controller
>[    0.830173] usb usb3: Manufacturer: Linux 4.17.3-200.fc28.x86_64 xhci-hcd
>[    0.830174] usb usb3: SerialNumber: 0000:00:14.0
>[    0.830338] hub 3-0:1.0: USB hub found
>[    0.830356] hub 3-0:1.0: 15 ports detected
>[    0.833638] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.833721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.833734] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
>[    0.833783] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
>[    0.833785] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.833786] usb usb4: Product: xHCI Host Controller
>[    0.833787] usb usb4: Manufacturer: Linux 4.17.3-200.fc28.x86_64 xhci-hcd
>[    0.833788] usb usb4: SerialNumber: 0000:00:14.0
>[    0.833876] hub 4-0:1.0: USB hub found
>[    0.833888] hub 4-0:1.0: 6 ports detected
>[    0.834757] usbcore: registered new interface driver usbserial_generic
>[    0.834761] usbserial: USB Serial support registered for generic
>[    0.834792] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.842860] i8042: Detected active multiplexing controller, rev 1.1
>[    0.846584] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.846588] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.846611] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.846628] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.846644] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.846756] mousedev: PS/2 mouse device common for all mice
>[    0.846912] rtc_cmos 00:04: RTC can wake from S4
>[    0.847073] rtc_cmos 00:04: registered as rtc0
>[    0.847075] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.847123] device-mapper: uevent: version 1.0.3
>[    0.847193] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
>[    0.847247] intel_pstate: Intel P-state driver initializing
>[    0.847861] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.847953] usbcore: registered new interface driver usbhid
>[    0.847954] usbhid: USB HID core driver
>[    0.848216] drop_monitor: Initializing network drop monitor service
>[    0.848507] Initializing XFRM netlink socket
>[    0.848796] NET: Registered protocol family 10
>[    0.855075] Segment Routing with IPv6
>[    0.855123] mip6: Mobile IPv6
>[    0.855127] NET: Registered protocol family 17
>[    0.856116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    0.856428] RAS: Correctable Errors collector initialized.
>[    0.856485] microcode: sig=0x306c3, pf=0x10, revision=0x24
>[    0.856767] microcode: Microcode Update Driver: v2.2.
>[    0.856784] AVX2 version of gcm_enc/dec engaged.
>[    0.856785] AES CTR mode by8 optimization enabled
>[    0.878771] sched_clock: Marking stable (878767715, 0)->(908581585, -29813870)
>[    0.878963] registered taskstats version 1
>[    0.878971] Loading compiled-in X.509 certificates
>[    0.912536] Loaded X.509 cert 'Fedora kernel signing key: 73d93265cead015846b96b84fecbac1648ac7e62'
>[    0.913151] Loaded UEFI:db cert 'Fujitsu BIOS DB Certificate: 2ebf8cd9b3324e874ef4e790ea6d1585' linked to secondary sys keyring
>[    0.913347] Loaded UEFI:db cert 'Fujitsu Technology Solutions GmbH: DB: 9d8e0a4aa809435e7318cc863546eacfa37403e6' linked to secondary sys keyring
>[    0.913367] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
>[    0.913383] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
>[    0.913795] zswap: loaded using pool lzo/zbud
>[    0.916894] Key type big_key registered
>[    0.918636] Key type encrypted registered
>[    0.927116] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
>[    0.927152] ima: No TPM chip found, activating TPM-bypass! (rc=7)
>[    0.927168] ima: Allocated hash algorithm: sha1
>[    0.927587]   Magic number: 10:184:832
>[    0.927741] rtc_cmos 00:04: setting system clock to 2018-07-03 11:49:34 UTC (1530618574)
>[    1.118526] ata1: SATA link down (SStatus 0 SControl 300)
>[    1.138097] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.154102] usb 3-2: new full-speed USB device number 2 using xhci_hcd
>[    1.154126] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.266789] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
>[    1.266795] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.267374] hub 1-1:1.0: USB hub found
>[    1.267473] hub 1-1:1.0: 6 ports detected
>[    1.282825] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
>[    1.282831] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.283375] hub 2-1:1.0: USB hub found
>[    1.283478] hub 2-1:1.0: 8 ports detected
>[    1.286033] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
>[    1.286038] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.286042] usb 3-2: Product: USB Receiver
>[    1.286058] usb 3-2: Manufacturer: Logitech
>[    1.412097] usb 3-5: new full-speed USB device number 3 using xhci_hcd
>[    1.430508] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.432435] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.432444] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.432557] ata3.00: supports DRM functions and may not be fully accessible
>[    1.433522] ata3.00: disabling queued TRIM support
>[    1.433528] ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
>[    1.433533] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    1.435534] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.435543] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.435655] ata3.00: supports DRM functions and may not be fully accessible
>[    1.436568] ata3.00: disabling queued TRIM support
>[    1.437878] ata3.00: configured for UDMA/133
>[    1.448606] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
>[    1.449270] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[    1.449631] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
>[    1.449679] sd 2:0:0:0: [sda] Write Protect is off
>[    1.449685] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.449752] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.450629]  sda: sda1
>[    1.451310] sd 2:0:0:0: [sda] supports TCG Opal
>[    1.451311] sd 2:0:0:0: [sda] Attached SCSI disk
>[    1.538471] usb 3-5: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10
>[    1.538474] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.539297] hub 3-5:1.0: USB hub found
>[    1.539388] hub 3-5:1.0: 4 ports detected
>[    1.544057] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
>[    1.568077] tsc: Refined TSC clocksource calibration: 2294.688 MHz
>[    1.568090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139aef754, max_idle_ns: 440795211890 ns
>[    1.568123] clocksource: Switched to clocksource tsc
>[    1.653071] usb 3-8: new full-speed USB device number 4 using xhci_hcd
>[    1.731642] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0a29, bcdDevice=76.57
>[    1.731646] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.731648] usb 1-1.2: Product: Logitech Wireless Headset
>[    1.731650] usb 1-1.2: Manufacturer: Logitech
>[    1.731652] usb 1-1.2: SerialNumber: 88C626353909
>[    1.744039] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:046D:0A29.0004/input/input10
>[    1.758261] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.759931] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.759936] ata5.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.760933] ata5.00: ATA-9: SAMSUNG MZ7LN512HCHP-00000, EMT0100Q, max UDMA/133
>[    1.760936] ata5.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    1.761657] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.761662] ata5.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.762738] ata5.00: configured for UDMA/133
>[    1.773315] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG MZ7LN512 100Q PQ: 0 ANSI: 5
>[    1.773674] sd 4:0:0:0: Attached scsi generic sg1 type 0
>[    1.773763] sd 4:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
>[    1.773816] sd 4:0:0:0: [sdb] Write Protect is off
>[    1.773820] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    1.773872] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.775739]  sdb: sdb1 sdb2 sdb3 sdb4
>[    1.776281] sd 4:0:0:0: [sdb] Attached SCSI disk
>[    1.999355] Freeing unused kernel memory: 2148K
>[    1.999788] hid-generic 0003:046D:0A29.0004: input,hiddev96,hidraw0: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:1a.0-1.2/input3
>[    2.000606] usb 3-8: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
>[    2.000607] usb 3-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.005051] Write protecting the kernel read-only data: 18432k
>[    2.006107] Freeing unused kernel memory: 2012K
>[    2.006307] Freeing unused kernel memory: 76K
>[    2.014860] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.014861] x86/mm: Checking user space page tables
>[    2.023270] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.023273] rodata_test: all tests were successful
>[    2.057197] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    2.063066] usb 3-5.2: new full-speed USB device number 5 using xhci_hcd
>[    2.069402] systemd[1]: Detected architecture x86-64.
>[    2.069406] systemd[1]: Running in initial RAM disk.
>[    2.071627] systemd[1]: Set hostname to <endor>.
>[    2.116266] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.116339] systemd[1]: Listening on udev Control Socket.
>[    2.116386] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.116394] systemd[1]: Reached target Slices.
>[    2.116403] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.116480] systemd[1]: Listening on Journal Socket.
>[    2.118695] systemd[1]: Starting Setup Virtual Console...
>[    2.119781] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    2.121542] systemd[1]: Starting Apply Kernel Variables...
>[    2.131493] audit: type=1130 audit(1530618575.702:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.141011] usb 3-5.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10
>[    2.141014] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.141017] usb 3-5.2: Product: O2Micro CCID SC Reader
>[    2.141019] usb 3-5.2: Manufacturer: O2
>[    2.161374] audit: type=1130 audit(1530618575.732:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.175473] audit: type=1130 audit(1530618575.746:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.194367] audit: type=1130 audit(1530618575.765:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.196508] audit: type=1130 audit(1530618575.767:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.196517] audit: type=1131 audit(1530618575.767:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.201836] audit: type=1130 audit(1530618575.772:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.254033] usb 3-9: new high-speed USB device number 6 using xhci_hcd
>[    2.293592] audit: type=1130 audit(1530618575.864:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.311603] audit: type=1130 audit(1530618575.882:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.326776] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    2.326778] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    2.326977] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    2.380177] usb 3-9: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
>[    2.380179] usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.381044] hub 3-9:1.0: USB hub found
>[    2.381102] hub 3-9:1.0: 2 ports detected
>[    2.414893] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
>[    2.496041] usb 3-12: new high-speed USB device number 7 using xhci_hcd
>[    2.497316] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c4:7d:46:12:69:a9
>[    2.497318] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    2.497355] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    2.497819] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
>[    2.497821] fb: switching to inteldrmfb from EFI VGA
>[    2.497876] Console: switching to colour dummy device 80x25
>[    2.497988] [drm] Replacing VGA console driver
>[    2.498477] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    2.498700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.498700] [drm] Driver supports precise vblank timestamp query.
>[    2.498922] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.523819] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
>[    2.524472] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.524662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
>[    2.659581] usb 3-12: New USB device found, idVendor=04f2, idProduct=b3b4, bcdDevice= 0.01
>[    2.659583] usb 3-12: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    2.659585] usb 3-12: Product: FJ Camera
>[    2.659586] usb 3-12: Manufacturer: Chicony Electronics Co.,Ltd.
>[    2.659588] usb 3-12: SerialNumber: 0x0001
>[    2.666805] logitech-djreceiver 0003:046D:C52B.0003: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
>[    2.699008] usb 3-9.1: new low-speed USB device number 8 using xhci_hcd
>[    2.737000] fbcon: inteldrmfb (fb0) is primary device
>[    2.737074] Console: switching to colour frame buffer device 240x67
>[    2.740319] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.772438] input: Logitech Unifying Device. Wireless PID:4041 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4041.0005/input/input12
>[    2.772625] hid-generic 0003:046D:4041.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4041] on usb-0000:00:14.0-2:1
>[    2.792569] usb 3-9.1: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.04
>[    2.792571] usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.792573] usb 3-9.1: Product: Dell USB Entry Keyboard
>[    2.792575] usb 3-9.1: Manufacturer: DELL
>[    2.798442] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:413C:2107.0006/input/input13
>[    2.842210] input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4041.0005/input/input14
>[    2.867148] hid-generic 0003:413C:2107.0006: input,hidraw2: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-9.1/input0
>[    2.867306] logitech-hidpp-device 0003:046D:4041.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-2:1
>[    2.912690] psmouse serio2: synaptics: queried max coordinates: x [..5652], y [..4676]
>[    3.004869] psmouse serio2: synaptics: queried min coordinates: x [1410..], y [1330..]
>[    3.004886] psmouse serio2: synaptics: Your touchpad (PNP: SYN1f08 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
>[    3.083466] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.192843] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x126800/0x0, board id: 2721, fw id: 1450880
>[    3.192851] psmouse serio2: synaptics: serio: Synaptics pass-through port at isa0060/serio2/input0
>[    3.319373] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
>[    4.106217] random: crng init done
>[    4.106220] random: 7 urandom warning(s) missed due to ratelimiting
>[    4.792041] systemd-journald[255]: Received SIGTERM from PID 1 (systemd).
>[    4.816373] systemd: 16 output lines suppressed due to ratelimiting
>[    4.917130] SELinux: 32768 avtab hash slots, 115759 rules.
>[    4.932667] SELinux: 32768 avtab hash slots, 115759 rules.
>[    5.255361] SELinux:  8 users, 14 roles, 5138 types, 321 bools, 1 sens, 1024 cats
>[    5.255363] SELinux:  129 classes, 115759 rules
>[    5.259660] SELinux:  Permission name_connect in class sctp_socket not defined in policy.
>[    5.259660] SELinux:  Permission association in class sctp_socket not defined in policy.
>[    5.259708] SELinux:  Class bpf not defined in policy.
>[    5.259708] SELinux: the above unknown classes and permissions will be allowed
>[    5.259712] SELinux:  policy capability network_peer_controls=1
>[    5.259712] SELinux:  policy capability open_perms=1
>[    5.259713] SELinux:  policy capability extended_socket_class=1
>[    5.259713] SELinux:  policy capability always_check_network=0
>[    5.259713] SELinux:  policy capability cgroup_seclabel=1
>[    5.259714] SELinux:  policy capability nnp_nosuid_transition=1
>[    5.259715] SELinux:  Completing initialization.
>[    5.259715] SELinux:  Setting up existing superblocks.
>[    5.276183] kauditd_printk_skb: 33 callbacks suppressed
>[    5.276184] audit: type=1403 audit(1530618578.847:44): policy loaded auid=4294967295 ses=4294967295
>[    5.278575] systemd[1]: Successfully loaded SELinux policy in 396.252ms.
>[    5.288547] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    5.317354] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 22.285ms.
>[    5.320059] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    5.332486] systemd[1]: Detected architecture x86-64.
>[    5.333599] systemd[1]: Set hostname to <endor>.
>[    5.464994] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:7: Unknown lvalue 'Server' in section 'Socket'
>[    5.497358] audit: type=1130 audit(1530611379.068:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.497368] audit: type=1131 audit(1530611379.068:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.497873] systemd[1]: Stopped Switch Root.
>[    5.498006] audit: type=1130 audit(1530611379.068:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.498078] audit: type=1131 audit(1530611379.069:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.498133] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
>[    5.498191] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
>[    5.498204] systemd[1]: Stopped Journal Service.
>[    5.498239] audit: type=1130 audit(1530611379.069:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.498241] audit: type=1131 audit(1530611379.069:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.499134] systemd[1]: Starting Journal Service...
>[    5.499615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    5.507324] audit: type=1305 audit(1530611379.078:51): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
>[    5.508178] systemd-journald[514]: File /run/log/journal/36bb40552e2548d5b95673b6efae81c4/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[    5.517369] EXT4-fs (sdb2): re-mounted. Opts: (null)
>[    5.527959] audit: type=1130 audit(1530611379.098:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.530588] audit: type=1130 audit(1530611379.101:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    5.543622] systemd-journald[514]: Received request to flush runtime journal from PID 1
>[    5.697651] EDAC ie31200: No ECC support
>[    5.722119] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX]
>[    5.722423] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/FUJ02B1:00/input/input18
>[    5.723240] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
>[    5.730748] ACPI: \_SB_.FEXT: BTNI: [0x1010001]
>[    5.730850] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input19
>[    5.735520] fujitsu_laptop: driver 0.6.0 successfully loaded
>[    5.761039] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    5.799605] media: Linux media interface: v0.10
>[    5.822165] Linux video capture interface: v2.00
>[    5.834236] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    5.835550] i801_smbus 0000:00:1f.3: SPD Write Disable is set
>[    5.835573] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    5.866696] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
>[    5.866778] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
>[    5.866849] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
>[    5.866930] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
>[    5.867017] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
>[    5.873236] Bluetooth: Core ver 2.22
>[    5.873368] NET: Registered protocol family 31
>[    5.873369] Bluetooth: HCI device and connection manager initialized
>[    5.873373] Bluetooth: HCI socket layer initialized
>[    5.873376] Bluetooth: L2CAP socket layer initialized
>[    5.873384] Bluetooth: SCO socket layer initialized
>[    5.880308] snd_hda_codec_realtek hdaudioC1D0: ALC282: SKU not ready 0x909701f0
>[    5.880728] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
>[    5.880730] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    5.880732] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    5.880734] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[    5.880735] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[    5.880737] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
>[    5.880739] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x1a
>[    5.880741] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
>[    5.885693] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    5.886170] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b3b4)
>[    5.886474] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    5.891724] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[    5.891728] cfg80211: failed to load regulatory.db
>[    5.894211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
>[    5.894302] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26
>[    5.894376] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input27
>[    5.894443] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input28
>[    5.904648] usbcore: registered new interface driver btusb
>[    5.904965] uvcvideo 3-12:1.0: Entity type for entity Extension 4 was not initialized!
>[    5.904967] uvcvideo 3-12:1.0: Entity type for entity Processing 2 was not initialized!
>[    5.904968] uvcvideo 3-12:1.0: Entity type for entity Camera 1 was not initialized!
>[    5.905050] input: FJ Camera: FJ Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input29
>[    5.905148] usbcore: registered new interface driver uvcvideo
>[    5.905150] USB Video Class driver (1.1.1)
>[    5.918075] Bluetooth: hci0: read Intel version: 3707100180012d0d2a
>[    5.918077] Bluetooth: hci0: Intel device is already patched. patch num: 2a
>[    5.931737] Intel(R) Wireless WiFi driver for Linux
>[    5.931738] Copyright(c) 2003- 2015 Intel Corporation
>[    5.932028] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    5.932029] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    5.932030] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    5.932031] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    5.932032] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    5.935597] iwlwifi 0000:02:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
>[    5.938204] Adding 23437308k swap on /dev/sdb3.  Priority:-2 extents:1 across:23437308k SSFS
>[    5.957329] usbcore: registered new interface driver snd-usb-audio
>[    5.981945] iTCO_vendor_support: vendor-support=0
>[    5.983335] gpio_ich: GPIO from 436 to 511 on gpio_ich
>[    5.983989] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    5.984052] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    5.984301] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    6.074564] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
>[    6.092218] iwlwifi 0000:02:00.0: base HW address: ac:fd:ce:a3:eb:4d
>[    6.128508] intel_rapl: Found RAPL domain package
>[    6.128511] intel_rapl: Found RAPL domain core
>[    6.128512] intel_rapl: Found RAPL domain uncore
>[    6.128513] intel_rapl: Found RAPL domain dram
>[    6.236049] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    6.237655] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
>[    6.321921] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    6.328263] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
>[    6.367510] RPC: Registered named UNIX socket transport module.
>[    6.367511] RPC: Registered udp transport module.
>[    6.367511] RPC: Registered tcp transport module.
>[    6.367512] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    6.413983] tpm tpm0: A TPM error (7) occurred attempting get random
>[    6.423050] tpm tpm0: A TPM error (7) occurred attempting get random
>[    6.432051] tpm tpm0: A TPM error (7) occurred attempting get random
>[    6.461074] tpm tpm0: A TPM error (7) occurred attempting get random
>[    6.491430] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    6.491432] Bluetooth: BNEP filters: protocol multicast
>[    6.491435] Bluetooth: BNEP socket layer initialized
>[    7.397459] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
>[    7.528595] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[    7.736205] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[    7.742061] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    8.000992] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    8.044613] loop: module loaded
>[    8.277116] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    8.376725] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[    8.509044] tun: Universal TUN/TAP device driver, 1.6
>[    8.511971] virbr0: port 1(virbr0-nic) entered blocking state
>[    8.511974] virbr0: port 1(virbr0-nic) entered disabled state
>[    8.512041] device virbr0-nic entered promiscuous mode
>[    8.662154] virbr0: port 1(virbr0-nic) entered blocking state
>[    8.662157] virbr0: port 1(virbr0-nic) entered listening state
>[    8.729518] virbr0: port 1(virbr0-nic) entered disabled state
>[    8.895937] Bridge firewalling registered
>[    9.230756] IPv6: ADDRCONF(NETDEV_UP): br-8ad9d9c4e61d: link is not ready
>[    9.453224] IPv6: ADDRCONF(NETDEV_UP): br-f167090fee37: link is not ready
>[    9.642113] IPv6: ADDRCONF(NETDEV_UP): br-08d46cd352e4: link is not ready
>[    9.861091] IPv6: ADDRCONF(NETDEV_UP): br-46a4bfbb1047: link is not ready
>[   10.090999] IPv6: ADDRCONF(NETDEV_UP): br-5e204d7c1eac: link is not ready
>[   10.412414] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
>[   10.735424] IPv6: ADDRCONF(NETDEV_UP): br-692449652d66: link is not ready
>[   10.810197] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   10.810246] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
>[   11.155387] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[   11.170931] IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready
>[   13.907867] wlp2s0: authenticate with 0a:18:d6:8d:18:47
>[   13.911035] wlp2s0: send auth to 0a:18:d6:8d:18:47 (try 1/3)
>[   13.913411] wlp2s0: authenticated
>[   13.913863] wlp2s0: associate with 0a:18:d6:8d:18:47 (try 1/3)
>[   13.917491] wlp2s0: RX AssocResp from 0a:18:d6:8d:18:47 (capab=0x431 status=0 aid=8)
>[   13.920692] wlp2s0: associated
>[   13.957624] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[   16.134943] usbcore: deregistering interface driver uvcvideo
>[   16.373018] fuse init (API version 7.26)
>[   16.853365] Bluetooth: RFCOMM TTY layer initialized
>[   16.853373] Bluetooth: RFCOMM socket layer initialized
>[   16.853452] Bluetooth: RFCOMM ver 1.11

Actions: View

Attachments on bug 1597000: 1455744 | 1456162