Attachment 1456258 Details for Bug 1295041 – setup-engine_ipv6_no_virbr0

setup-engine_ipv6_no_virbr0

setup-engine_with-ipv6_no_virbr0.txt (text/plain), 11.46 KB, created by Roni on 2018-07-03 14:39:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roni

Created: 2018-07-03 14:39:50 UTC

Size: 11.46 KB

patch

obsolete

>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# ip a
>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>    inet 127.0.0.1/8 scope host lo
>       valid_lft forever preferred_lft forever
>    inet6 ::1/128 scope host 
>       valid_lft forever preferred_lft forever
>2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
>    link/ether 00:1a:4a:16:98:76 brd ff:ff:ff:ff:ff:ff
>    inet6 2001::2/64 scope global noprefixroute 
>       valid_lft forever preferred_lft forever
>    inet6 fe80::21a:4aff:fe16:9876/64 scope link noprefixroute 
>       valid_lft forever preferred_lft forever
>4: virbr0-nic: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
>    link/ether 52:54:00:98:f2:17 brd ff:ff:ff:ff:ff:ff
>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 
># Generated by dracut initrd
>NAME="eth0"
>HWADDR="00:1A:4A:16:98:76"
>ONBOOT="yes"
>NETBOOT="yes"
>UUID="60de5581-79a7-4859-895e-29bf56f902e4"
>IPV6INIT="yes"
>#BOOTPROTO="dhcp"
>BOOTPROTO="none"
>TYPE="Ethernet"
>PROXY_METHOD="none"
>BROWSER_ONLY="no"
>DEFROUTE="yes"
>IPV4_FAILURE_FATAL="no"
>IPV6_AUTOCONF="yes"
>IPV6_DEFROUTE="yes"
>IPV6_FAILURE_FATAL="no"
>IPV6ADDR="2001::2"
>#DHCPV6C="yes"
>#IPADDR="10.35.163.128"
>
>[root@engine ~]# 
>[root@engine ~]# hostname
>engine.ipv6
>[root@engine ~]# 
>[root@engine ~]# cat /etc/hosts
>#127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
>#::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
>
>::1         localhost.ipv6
>2001::2     engine.ipv6
>#10.35.163.128 engine.ipv4
>
>[root@engine ~]# 
>[root@engine ~]# ping engine.ipv6
>PING engine.ipv6 (127.0.0.2) 56(84) bytes of data.
>64 bytes from engine.ipv6 (127.0.0.2): icmp_seq=1 ttl=64 time=0.050 ms
>64 bytes from engine.ipv6 (127.0.0.2): icmp_seq=2 ttl=64 time=0.125 ms
>64 bytes from engine.ipv6 (127.0.0.2): icmp_seq=3 ttl=64 time=0.082 ms
>64 bytes from engine.ipv6 (127.0.0.2): icmp_seq=4 ttl=64 time=0.074 ms
>64 bytes from engine.ipv6 (127.0.0.2): icmp_seq=5 ttl=64 time=0.106 ms
>^C
>--- engine.ipv6 ping statistics ---
>5 packets transmitted, 5 received, 0% packet loss, time 3999ms
>rtt min/avg/max/mdev = 0.050/0.087/0.125/0.027 ms
>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# ping6 engine.ipv6
>PING engine.ipv6(engine.ipv6 (2001::2)) 56 data bytes
>64 bytes from engine.ipv6 (2001::2): icmp_seq=1 ttl=64 time=0.080 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=2 ttl=64 time=0.102 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=3 ttl=64 time=0.110 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=4 ttl=64 time=0.109 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=5 ttl=64 time=0.126 ms
>^C
>--- engine.ipv6 ping statistics ---
>5 packets transmitted, 5 received, 0% packet loss, time 4003ms
>rtt min/avg/max/mdev = 0.080/0.105/0.126/0.017 ms
>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# ping6 engine.ipv6
>PING engine.ipv6(engine.ipv6 (2001::2)) 56 data bytes
>64 bytes from engine.ipv6 (2001::2): icmp_seq=1 ttl=64 time=0.082 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=2 ttl=64 time=0.149 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=3 ttl=64 time=0.110 ms
>64 bytes from engine.ipv6 (2001::2): icmp_seq=4 ttl=64 time=0.088 ms
>^C
>--- engine.ipv6 ping statistics ---
>4 packets transmitted, 4 received, 0% packet loss, time 3008ms
>rtt min/avg/max/mdev = 0.082/0.107/0.149/0.027 ms
>[root@engine ~]# ^C
>[root@engine ~]# ^C
>[root@engine ~]# ^C
>[root@engine ~]# ^C
>[root@engine ~]# engine-setup --offline
>[ INFO  ] Stage: Initializing
>[ INFO  ] Stage: Environment setup
>          Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-wsp.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf']
>          Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20180703165526-d9l2ce.log
>          Version: otopi-1.7.8 (otopi-1.7.8-1.el7ev)
>[ INFO  ] Stage: Environment packages setup
>[ INFO  ] Stage: Programs detection
>[ INFO  ] Stage: Environment setup
>[ INFO  ] Stage: Environment customization
>         
>          --== PRODUCT OPTIONS ==--
>         
>          Configure Engine on this host (Yes, No) [Yes]: 
>          Configure ovirt-provider-ovn (Yes, No) [Yes]: No
>          Configure Image I/O Proxy on this host (Yes, No) [Yes]: 
>          Configure WebSocket Proxy on this host (Yes, No) [Yes]: 
>         
>          * Please note * : Data Warehouse is required for the engine.
>          If you choose to not configure it on this host, you have to configure
>          it on a remote host, and then configure the engine on this host so
>          that it can access the database of the remote Data Warehouse host.
>          Configure Data Warehouse on this host (Yes, No) [Yes]: 
>          Configure VM Console Proxy on this host (Yes, No) [Yes]: 
>         
>          --== PACKAGES ==--
>         
>         
>          --== NETWORK CONFIGURATION ==--
>         
>          Host fully qualified DNS name of this server [engine.ipv6]: 
>[WARNING] Failed to resolve engine.ipv6 using DNS, it can be resolved only locally
>          Setup can automatically configure the firewall on this system.
>          Note: automatic configuration of the firewall may overwrite current settings.
>          NOTICE: iptables is deprecated and will be removed in future releases
>          Do you want Setup to configure the firewall? (Yes, No) [Yes]: 
>[ INFO  ] firewalld will be configured as firewall manager.
>         
>          --== DATABASE CONFIGURATION ==--
>         
>          Where is the DWH database located? (Local, Remote) [Local]: 
>          Setup can configure the local postgresql server automatically for the DWH to run. This may conflict with existing applications.
>          Would you like Setup to automatically configure postgresql and create DWH database, or prefer to perform that manually? (Automatic, Manual) [Automatic]: 
>          Where is the Engine database located? (Local, Remote) [Local]: 
>          Setup can configure the local postgresql server automatically for the engine to run. This may conflict with existing applications.
>          Would you like Setup to automatically configure postgresql and create Engine database, or prefer to perform that manually? (Automatic, Manual) [Automatic]: 
>         
>          --== OVIRT ENGINE CONFIGURATION ==--
>         
>          Engine admin password: 
>[ ERROR ] Please specify value
>          Engine admin password: 
>          Confirm engine admin password: 
>[WARNING] Password is weak: it is too simplistic/systematic
>          Use weak password? (Yes, No) [No]: Yes
>          Application mode (Virt, Gluster, Both) [Both]: 
>         
>          --== STORAGE CONFIGURATION ==--
>         
>          Default SAN wipe after delete (Yes, No) [No]: 
>         
>          --== PKI CONFIGURATION ==--
>         
>          Organization name for certificate [ipv6]: 
>         
>          --== APACHE CONFIGURATION ==--
>         
>          Setup can configure the default page of the web server to present the application home page. This may conflict with existing applications.
>          Do you wish to set the application as the default page of the web server? (Yes, No) [Yes]: 
>          Setup can configure apache to use SSL using a certificate issued from the internal CA.
>          Do you wish Setup to configure that, or prefer to perform that manually? (Automatic, Manual) [Automatic]: 
>         
>          --== SYSTEM CONFIGURATION ==--
>         
>         
>          --== MISC CONFIGURATION ==--
>         
>          Please choose Data Warehouse sampling scale:
>          (1) Basic
>          (2) Full
>          (1, 2)[1]: 
>         
>          --== END OF CONFIGURATION ==--
>         
>[ INFO  ] Stage: Setup validation
>[WARNING] Less than 16384MB of memory is available
>         
>          --== CONFIGURATION PREVIEW ==--
>         
>          Application mode                        : both
>          Default SAN wipe after delete           : False
>          Firewall manager                        : firewalld
>          Update Firewall                         : True
>          Host FQDN                               : engine.ipv6
>          Configure local Engine database         : True
>          Set application as default page         : True
>          Configure Apache SSL                    : True
>          Engine database secured connection      : False
>          Engine database user name               : engine
>          Engine database name                    : engine
>          Engine database host                    : localhost
>          Engine database port                    : 5432
>          Engine database host name validation    : False
>          Engine installation                     : True
>          PKI organization                        : ipv6
>          Set up ovirt-provider-ovn               : False
>          Configure WebSocket Proxy               : True
>          DWH installation                        : True
>          DWH database host                       : localhost
>          DWH database port                       : 5432
>          Configure local DWH database            : True
>          Configure Image I/O Proxy               : True
>          Configure VMConsole Proxy               : True
>         
>          Please confirm installation settings (OK, Cancel) [OK]: 
>[ INFO  ] Stage: Transaction setup
>[ INFO  ] Stopping engine service
>[ INFO  ] Stopping ovirt-fence-kdump-listener service
>[ INFO  ] Stopping dwh service
>[ INFO  ] Stopping Image I/O Proxy service
>[ INFO  ] Stopping vmconsole-proxy service
>[ INFO  ] Stopping websocket-proxy service
>[ INFO  ] Stage: Misc configuration
>[ INFO  ] Stage: Package installation
>[ INFO  ] Stage: Misc configuration
>[ INFO  ] Upgrading CA
>[ INFO  ] Creating PostgreSQL 'engine' database
>[ INFO  ] Configuring PostgreSQL
>[ INFO  ] Creating PostgreSQL 'ovirt_engine_history' database
>[ INFO  ] Configuring PostgreSQL
>[ INFO  ] Creating CA
>[ INFO  ] Creating/refreshing DWH database schema
>[ INFO  ] Configuring Image I/O Proxy
>[ INFO  ] Setting up ovirt-vmconsole proxy helper PKI artifacts
>[ INFO  ] Setting up ovirt-vmconsole SSH PKI artifacts
>[ INFO  ] Configuring WebSocket Proxy
>[ INFO  ] Creating/refreshing Engine database schema
>[ INFO  ] Creating/refreshing Engine 'internal' domain database schema
>[ INFO  ] Setting a password for internal user admin
>[ INFO  ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
>[ INFO  ] Stage: Transaction commit
>[ INFO  ] Stage: Closing up
>[ INFO  ] Starting engine service
>[ INFO  ] Starting dwh service
>[ INFO  ] Restarting ovirt-vmconsole proxy service
>         
>          --== SUMMARY ==--
>         
>[ INFO  ] Restarting httpd
>          Please use the user 'admin@internal' and password specified in order to login
>          Web access is enabled at:
>              http://engine.ipv6:80/ovirt-engine
>              https://engine.ipv6:443/ovirt-engine
>          Internal CA 99:11:96:5E:94:43:10:EE:BF:5A:70:89:2C:54:F5:06:38:FB:90:13
>          SSH fingerprint: SHA256:FrKaJD0TFxpvJxbHBj0ky+zUAN09dojthw35gfPHxl8
>[WARNING] Less than 16384MB of memory is available
>         
>          --== END OF SUMMARY ==--
>         
>[ INFO  ] Stage: Clean up
>          Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20180703165526-d9l2ce.log
>[ INFO  ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20180703170027-setup.conf'
>[ INFO  ] Stage: Pre-termination
>[ INFO  ] Stage: Termination
>[ INFO  ] Execution of setup completed successfully
>[root@engine ~]# 
>[root@engine ~]# 
>[root@engine ~]# 
>

Actions: View

Attachments on bug 1295041: 1455492 | 1456252 | 1456253 | 1456258