Attachment 145657 Details for Bug 222783 – Output from dmesg after doing it.

Output from dmesg after doing it.

dmesg.output (text/plain), 24.72 KB, created by Brian Harvey on 2007-01-16 07:11:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brian Harvey

Created: 2007-01-16 07:11:05 UTC

Size: 24.72 KB

patch

obsolete

>Linux version 2.6.18-bh (bh@bh.localdomain) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #9 SMP Mon Jan 15 21:09:25 PST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005f6e0000 (usable)
> BIOS-e820: 000000005f6e0000 - 000000005f6f5000 (ACPI data)
> BIOS-e820: 000000005f6f5000 - 000000005f700000 (ACPI NVS)
> BIOS-e820: 000000005f700000 - 0000000060000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>630MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 390880
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 161504 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 IBM                                   ) @ 0x000f6c10
>ACPI: XSDT (v001 IBM    TP-74    0x00001170  LTP 0x00000000) @ 0x5f6e4c53
>ACPI: FADT (v003 IBM    TP-74    0x00001170 IBM  0x00000001) @ 0x5f6e4d00
>ACPI: SSDT (v001 IBM    TP-74    0x00001170 MSFT 0x0100000e) @ 0x5f6e4eb4
>ACPI: ECDT (v001 IBM    TP-74    0x00001170 IBM  0x00000001) @ 0x5f6f4d8e
>ACPI: TCPA (v001 IBM    TP-74    0x00001170 PTL  0x00000001) @ 0x5f6f4de0
>ACPI: MADT (v001 IBM    TP-74    0x00001170 IBM  0x00000001) @ 0x5f6f4e12
>ACPI: MCFG (v001 IBM    TP-74    0x00001170 IBM  0x00000001) @ 0x5f6f4e6c
>ACPI: BOOT (v001 IBM    TP-74    0x00001170  LTP 0x00000001) @ 0x5f6f4fd8
>ACPI: DSDT (v001 IBM    TP-74    0x00001170 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
>Detected 1496.335 MHz processor.
>Built 1 zonelists.  Total pages: 390880
>Kernel command line: ro root=LABEL=/ rhgb quiet acpi_sleep=s3_bios resume=/dev/sda6 vga=0x317 video=i810fb:vram:2,xres:1024,yres=768,bpp:24,hsync1:30,hsync2:49,vsync1:40,vsync2:70,accel,mtrr
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0946000 soft=c0926000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1541840k/1563520k available (3198k kernel code, 20416k reserved, 1283k data, 272k init, 646016k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2994.59 BogoMIPS (lpj=1497299)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
>Total of 1 processors activated (2994.59 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=416 bytes
>sizeof(dentry)=148 bytes
>sizeof(ext3inode)=592 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1392 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1328k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Found ECDT
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>FS-Cache: Loaded
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: a0100000-a01fffff
>  PREFETCH window: disabled.
>PCI: Bus 5, cardbus bridge: 0000:04:00.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: d0000000-d1ffffff
>  MEM window: a2000000-a3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-6fff
>  MEM window: a0200000-afffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 177
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1168895665.774:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>FS-Cache: netfs 'nfs' registered for caching
>NTFS driver 2.1.27 [Flags: R/W DEBUG].
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (64 C)
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
>intelfb: Version 0.9.4
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
>intelfb: Cannot reserve FB region.
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>pnp: Device 00:09 activated.
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 201
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>Probing IDE interface ide1...
>hdc: UJDA755yDVD/CDRW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:04:00.0 [1014:0555]
>Yenta: ISA IRQ mask 0x0438, PCI irq 177
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
>pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>Initializing USB Mass Storage driver...
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
>usbcore: registered new driver visor
>drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
>ALSA device list:
>  No soundcards found.
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211_crypt: registered algorithm 'WEP'
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 272k freed
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 217, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 225, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 225, io mem 0xa0040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata: 0x170 IDE port busy
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
>scsi0 : ata_piix
>ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>  Vendor: ATA       Model: HTC426060G9AT00   Rev: 00P3
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5<3>usb 1-1: device not accepting address 2, error -71
> sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 3 ports detected
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>audit(1168895674.125:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1585 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49500 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1168895674.648:3): policy loaded auid=4294967295
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:04:00.1 [1180:0822] (rev 13)
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 17 (level, low) -> IRQ 209
>mmc0: SDHCI at 0xa0201000 irq 209 DMA
>tg3.c:v3.65 (August 07, 2006)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0a:e4:33:f6:5d
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 233
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>intel_rng: FWH not detected
>ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 201
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>PCI: Enabling device 0000:00:1e.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>intel8x0_measure_ac97_clock: measured 50470 usecs
>intel8x0: clocking to 48000
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Error installing notify handler
>ACPI: ACPI Dock Station Driver 
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>EXT3 FS on sda5, internal journal
>SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2097140k swap on /dev/sda6.  Priority:-1 extents:1 across:2097140k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
>audit(1168924515.091:4): audit_pid=2202 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>mtrr: no more MTRRs available
>mtrr: no more MTRRs available
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
>Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
>remove_proc_entry: ide1/hdc busy, count=1
>remove_proc_entry: ide/ide1 busy, count=1
>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c0405227>] dump_trace+0x69/0x1af
> [<c0405385>] show_trace_log_lvl+0x18/0x2c
> [<c0405939>] show_trace+0xf/0x11
> [<c0405a36>] dump_stack+0x15/0x17
> [<c0439966>] down_read+0x12/0x20
> [<c059b715>] pci_find_device+0x58/0xa7
> [<c062e365>] init_hwif_default+0x28/0xeb
> [<c062efb0>] ide_unregister+0x240/0x573
> [<c062fa49>] generic_ide_ioctl+0x31e/0x462
> [<c063b6fc>] idecd_ioctl+0x125/0x15b
> [<c0587016>] blkdev_driver_ioctl+0x4e/0x5e
> [<c0587654>] blkdev_ioctl+0x62e/0x67a
> [<c04768d6>] block_ioctl+0x18/0x1b
> [<c047fb97>] do_ioctl+0x1f/0x62
> [<c047fe24>] vfs_ioctl+0x24a/0x25c
> [<c047fe82>] sys_ioctl+0x4c/0x66
> [<c040405f>] syscall_call+0x7/0xb
>DWARF2 unwinder stuck at syscall_call+0x7/0xb
>Leftover inexact backtrace:
> =======================
>BUG: unable to handle kernel NULL pointer dereference at virtual address 0000011c
> printing eip:
>c063ae05
>*pde = 00000000
>Oops: 0000 [#1]
>SMP 
>last sysfs file: /class/net/eth0/carrier
>Modules linked in: autofs4(U) hidp(U) rfcomm(U) l2cap(U) bluetooth(U) ipt_REJECT(U) xt_state(U) ip_conntrack(U) nfnetlink(U) xt_tcpudp(U) iptable_filter(U) ip_tables(U) x_tables(U) cpufreq_ondemand(U) dm_mirror(U) dm_mod(U) sbs(U) i2c_ec(U) fan(U) dock(U) button(U) battery(U) asus_acpi(U) ac(U) ipv6(U) snd_intel8x0(U) snd_intel8x0m(U) sg(U) snd_ac97_codec(U) snd_ac97_bus(U) snd_seq_dummy(U) snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U) snd_pcm_oss(U) i2c_i801(U) i2c_core(U) snd_pcm(U) ipw2200(U) tg3(U) sdhci(U) serio_raw(U) mmc_core(U) snd_timer(U) snd_page_alloc(U) ahci(U) ata_piix(U) libata(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U)
>CPU:    0
>EIP:    0060:[<c063ae05>]    Not tainted VLI
>EFLAGS: 00010246   (2.6.18-bh #9) 
>EIP is at cdrom_lockdoor+0x1f/0xcf
>eax: 00000000   ebx: c1e0be00   ecx: 00000000   edx: 00000000
>esi: f57c4ec8   edi: c09b7b94   ebp: 00000000   esp: f57c4e14
>ds: 007b   es: 007b   ss: 0068
>Process hdparm (pid: 3788, ti=f57c4000 task=f58951c0 task.ti=f57c4000)
>Stack: 000a4e20 00000000 f57c4e58 ffffffff ffffffff 00000000 00000246 f58951c0 
>       c07fe840 c1ddb580 f588e080 00000001 c058701d 00000001 c1ccc784 fffffdfd 
>       00000001 0000032a c1ccc700 c0587654 0000032a 00000001 000b0000 ffffffff 
>Call Trace:
> [<c064c75a>] cdrom_release+0x185/0x1dc
> [<c063b750>] idecd_release+0x1e/0x30
> [<c0476dc0>] blkdev_put+0x4b/0xfd
> [<c0470fa5>] __fput+0xba/0x188
> [<c046e831>] filp_close+0x52/0x59
> [<c040405f>] syscall_call+0x7/0xb
>DWARF2 unwinder stuck at syscall_call+0x7/0xb
>Leftover inexact backtrace:
> =======================
>Code: 43 08 e8 7f 6a e6 ff 89 d8 5b eb c0 55 89 d5 57 89 c7 56 89 ce 53 81 ec f4 00 00 00 85 c9 8d 84 24 b4 00 00 00 0f 44 f0 8b 47 1c <f6> 80 1c 01 00 00 02 0f 85 92 00 00 00 8d 5c 24 08 89 f8 89 da 
>EIP: [<c063ae05>] cdrom_lockdoor+0x1f/0xcf SS:ESP 0068:f57c4e14
>

Actions: View

Attachments on bug 222783: 145657