Attachment 145745 Details for Bug 219914 – Output of the 'dmesg' command

Output of the 'dmesg' command

dmesg_output.txt (text/plain), 18.52 KB, created by Alessandro Volpi on 2007-01-16 21:53:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alessandro Volpi

Created: 2007-01-16 21:53:05 UTC

Size: 18.52 KB

patch

obsolete

>Linux version 2.6.18-1.2257.fc5 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Fri Dec 15 16:06:24 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffea800 (usable)
> BIOS-e820: 000000001ffea800 - 0000000020000000 (reserved)
> BIOS-e820: 00000000feea0000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 131050
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 126954 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fde50
>ACPI: RSDT (v001 DELL    CPi R   0x27d40115 ASL  0x00000061) @ 0x000fde64
>ACPI: FADT (v001 DELL    CPi R   0x27d40115 ASL  0x00000061) @ 0x000fde90
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 30000000 (gap: 20000000:deea0000)
>Detected 698.492 MHz processor.
>Built 1 zonelists.  Total pages: 131050
>Kernel command line: ro root=LABEL=/
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01404000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0756000 soft=c0755000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 514336k/524200k available (2027k kernel code, 9308k reserved, 795k data, 220k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1397.59 BogoMIPS (lpj=698797)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Pentium III (Coppermine) stepping 06
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c20)
>checking if image is initramfs... it is
>Freeing initrd memory: 919k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 could not be reserved
>pnp: 00:02: ioport range 0x808-0x80f could not be reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x810-0x85f could not be reserved
>pnp: 00:03: ioport range 0x860-0x87f has been reserved
>pnp: 00:03: ioport range 0x880-0x8bf has been reserved
>pnp: 00:03: ioport range 0x8c0-0x8ff has been reserved
>pnp: 00:03: ioport range 0x600-0x67f has been reserved
>pnp: 00:03: ioport range 0x680-0x6ff has been reserved
>pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:09: ioport range 0x900-0x91f has been reserved
>pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: e8000000-ebffffff
>PCI: Bus 3, cardbus bridge: 0000:02:0f.0
>  IO window: 0000e000-0000e0ff
>  IO window: 00001000-000010ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: f4000000-f5ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:0f.1
>  IO window: 00001400-000014ff
>  IO window: 00001800-000018ff
>  PREFETCH window: 32000000-33ffffff
>  MEM window: f6000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-ffff
>  MEM window: f4000000-fbffffff
>  PREFETCH window: 30000000-34ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:0f.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:0f.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Enabling device 0000:02:0f.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:0f.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>cpufreq: change failed with new_state 2 and result 0
>cpufreq: change failed with new_state 2 and result 0
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1168983016.300:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key DA272E53BD0532F6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THM] (35 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i815 Chipset.
>agpgart: AGP aperture is 64M @ 0xe4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2M: IDE controller at PCI slot 0000:00:1f.1
>ICH2M: chipset revision 2
>ICH2M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: IBM-DJSA-232, ATA DISK drive
>hdb: MATSHITA CD-RW UJDA330, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>hda: max request size: 128KiB
>hda: 62506080 sectors (32003 MB) w/1874KiB Cache, CHS=62010/16/63, UDMA(66)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:0f.0 [1028:00a3]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:0f.0, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
>Yenta: CardBus bridge found at 0000:02:0f.1 [1028:00a3]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:0f.1, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 220k freed
>Write protecting the kernel read-only data: 376k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>Synaptics Touchpad, model: 1, fw: 5.6, id: 0x8144b1, caps: 0x804793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1168983021.422:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
>security:  58 classes, 43474 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1168983021.864:3): policy loaded auid=4294967295
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>input: PC Speaker as /class/input/input3
>hdb: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>Intel 82802 RNG detected
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:02:06.0: 3Com PCI 3c556 Laptop Tornado at e0836c00.
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x200-0x207 0x370-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x200-0x207 0x370-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:02:0f.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[f8ffc800-f8ffcfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[334fc00038ad0810]
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PBTN]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: ACPI Dock Station Driver 
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>EXT3 FS on hda2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda5, type ext3), uses xattr
>Adding 1052248k swap on /dev/hda3.  Priority:-1 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4095 buckets, 32760 max) - 228 bytes per conntrack
>eth0:  setting half-duplex.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>audit(1168983081.538:4): avc:  denied  { read } for  pid=1855 comm="printconf-backe" name="_PRINTCONF_BACKEND_" dev=hda2 ino=366950 scontext=system_u:system_r:cupsd_config_t:s0 tcontext=root:object_r:var_t:s0 tclass=file
>audit(1168983081.580:5): avc:  denied  { unlink } for  pid=1855 comm="printconf-backe" name="1" dev=hda2 ino=360523 scontext=system_u:system_r:cupsd_config_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=file
>audit(1168983081.642:6): avc:  denied  { unlink } for  pid=1855 comm="printconf-backe" name="44596340" dev=hda2 ino=366943 scontext=system_u:system_r:cupsd_config_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=file
>audit(1168983081.645:7): avc:  denied  { write } for  pid=1855 comm="printconf-backe" name="_PRINTCONF_BACKEND_" dev=hda2 ino=366950 scontext=system_u:system_r:cupsd_config_t:s0 tcontext=root:object_r:var_t:s0 tclass=file
>audit(1168983112.591:8): avc:  denied  { setattr } for  pid=1872 comm="cupsd" name="cups" dev=hda2 ino=363673 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c255 tcontext=root:object_r:var_t:s0 tclass=dir
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>audit(1168983114.374:9): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.375:10): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.375:11): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.377:12): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.377:13): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.378:14): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1168983114.378:15): avc:  denied  { read } for  pid=1944 comm="gpm" name="localtime" dev=hda2 ino=464074 scontext=system_u:system_r:gpm_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized r128 2.5.0 20030725 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode

Actions: View

Attachments on bug 219914: 143844 | 143845 | 143846 | 143953 | 143955 | 145745 | 145746