Attachment 145921 Details for Bug 223214 – dmesg output of suspend & resume on VIA EPIA CN13000

dmesg output of suspend & resume on VIA EPIA CN13000

dmesg.suspend.log (text/plain), 19.23 KB, created by Jeroen Janssen on 2007-01-18 14:29:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeroen Janssen

Created: 2007-01-18 14:29:26 UTC

Size: 19.23 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:32:37 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
> BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS)
> BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>495MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 126960) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   126960
>  HighMem    126960 ->   126960
>early_node_map[1] active PFN ranges
>    0:        0 ->   126960
>On node 0 totalpages: 126960
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 959 pages used for memmap
>  Normal zone: 121905 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 P4M80P                                ) @ 0x000f8f80
>ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff3040
>ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff30c0
>ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 20000000 (gap: 1f000000:e0ff0000)
>Detected 1296.847 MHz processor.
>Built 1 zonelists.  Total pages: 125969
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>No local APIC present or hardware disabled
>mapped APIC to ffffd000 (01405000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07f6000 soft=c07d6000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 495888k/507840k available (2177k kernel code, 11428k reserved, 1108k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdf800000 - 0xff7fe000   ( 511 MB)
>    lowmem  : 0xc0000000 - 0xdeff0000   ( 495 MB)
>      .init : 0xc0795000 - 0xc07d1000   ( 240 kB)
>      .data : 0xc0620657 - 0xc07358f4   (1108 kB)
>      .text : 0xc0400000 - 0xc0620657   (2177 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2595.74 BogoMIPS (lpj=1297874)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7c9b8ff 00000000 00000000 00000000 00000181 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 128K (64 bytes/line)
>CPU: After all inits, caps: 27c9b0ff 00000000 00000000 00000000 00000181 00003fcc 00000000
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 8e00)
>CPU0: Centaur VIA Esther processor 1300MHz stepping 09
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2251k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfa9b0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *15
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x400-0x47f could not be reserved
>pnp: 00:02: ioport range 0x500-0x50f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: fb000000-fcffffff
>  PREFETCH window: f4000000-f7ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1169127875.989:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5FA3A1EB952EC724
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA P4M800CE chipset
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 400k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: VIA IRQ fixup for 0000:00:10.2, from 15 to 10
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: VIA IRQ fixup for 0000:00:10.3, from 15 to 10
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 10, io base 0x0000d800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 10, io mem 0xfdfff000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: VIA IRQ fixup for 0000:00:0f.0, from 15 to 10
>sata_via 0000:00:0f.0: routed to hard irq line 10
>ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 10
>ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 10
>scsi0 : sata_via
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA7, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_via
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xF407
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1169127883.072:2): selinux=0 auid=4294967295
>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0xfdffe000, 00:40:63:e6:45:cf, IRQ 11.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>input: PC Speaker as /class/input/input2
>Floppy drive(s): fd0 is 1.44M
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 917496k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:917496k
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized via 2.10.0 20060529 on minor 0
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>Disabling non-boot CPUs ...
>Stopping tasks: ===================================================================================================================|
>Suspending console(s)
>pnp: Device 00:08 disabled.
>ACPI: PCI interrupt for device 0000:00:11.5 disabled
>ACPI: PCI interrupt for device 0000:00:10.4 disabled
>ACPI: PCI interrupt for device 0000:00:10.3 disabled
>ACPI: PCI interrupt for device 0000:00:10.2 disabled
>ACPI: PCI interrupt for device 0000:00:10.1 disabled
>ACPI: PCI interrupt for device 0000:00:10.0 disabled
>pci_set_power_state(): 0000:00:00.0: state=3, current state=5
>cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
>Back to C!
>cpufreq: resume failed to assert current frequency is what timing core thinks it is.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>pnp: Device 00:08 activated.
>pnp: Failed to activate device 00:09.
>pnp: Failed to activate device 00:0a.
>Restarting tasks...<4>ATA: abnormal status 0x80 on port 0xFC07
>ATA: abnormal status 0x80 on port 0xFC07
>ATA: abnormal status 0x80 on port 0xFC07
> done
>Enabling non-boot CPUs ...
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: (BMDMA stat 0x1)
>ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>Disabling non-boot CPUs ...
>Stopping tasks: ===================================================================================================================|
>Suspending console(s)
>pnp: Device 00:08 disabled.
>ACPI: PCI interrupt for device 0000:00:11.5 disabled
>ACPI: PCI interrupt for device 0000:00:10.4 disabled
>ACPI: PCI interrupt for device 0000:00:10.3 disabled
>ACPI: PCI interrupt for device 0000:00:10.2 disabled
>ACPI: PCI interrupt for device 0000:00:10.1 disabled
>ACPI: PCI interrupt for device 0000:00:10.0 disabled
>cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
>Back to C!
>cpufreq: resume failed to assert current frequency is what timing core thinks it is.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>usb usb1: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>pnp: Device 00:08 activated.
>pnp: Failed to activate device 00:09.
>pnp: Failed to activate device 00:0a.
>Restarting tasks...<4>ATA: abnormal status 0x80 on port 0xFC07
>ATA: abnormal status 0x80 on port 0xFC07
>ATA: abnormal status 0x80 on port 0xFC07
> done
>Enabling non-boot CPUs ...
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: (BMDMA stat 0x1)
>ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]

Actions: View

Attachments on bug 223214: 145921 | 154120