Attachment 145991 Details for Bug 223463 – dmesg output

dmesg output

dmesg3 (text/plain), 27.85 KB, created by Peter F. Patel-Schneider on 2007-01-19 15:52:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter F. Patel-Schneider

Created: 2007-01-19 15:52:00 UTC

Size: 27.85 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:28:18 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
> BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6820
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523984
>early_node_map[1] active PFN ranges
>    0:        0 ->   523984
>On node 0 totalpages: 523984
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292307 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 LENOVO                                ) @ 0x000f67e0
>ACPI: XSDT (v001 LENOVO TP-79    0x00002030  LTP 0x00000000) @ 0x7fed1599
>ACPI: FADT (v003 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fed1700
>ACPI: SSDT (v001 LENOVO TP-79    0x00002030 MSFT 0x0100000e) @ 0x7fed18b4
>ACPI: ECDT (v001 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fededcc
>ACPI: TCPA (v002 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fedee1e
>ACPI: MADT (v001 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fedee50
>ACPI: MCFG (v001 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fedeeb8
>ACPI: HPET (v001 LENOVO TP-79    0x00002030 LNVO 0x00000001) @ 0x7fedeef4
>ACPI: BOOT (v001 LENOVO TP-79    0x00002030  LTP 0x00000001) @ 0x7fedefd8
>ACPI: SSDT (v001 LENOVO TP-79    0x00002030 INTL 0x20050513) @ 0x7fef2697
>ACPI: SSDT (v001 LENOVO TP-79    0x00002030 INTL 0x20050513) @ 0x7fef28f6
>ACPI: SSDT (v001 LENOVO TP-79    0x00002030 INTL 0x20050513) @ 0x7fef299c
>ACPI: SSDT (v001 LENOVO TP-79    0x00002030 INTL 0x20050513) @ 0x7fef2e93
>ACPI: DSDT (v001 LENOVO TP-79    0x00002030 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>Detected 2161.456 MHz processor.
>Built 1 zonelists.  Total pages: 519891
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0808000 soft=c07e8000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070240k/2095936k available (2210k kernel code, 24404k reserved, 1135k data, 244k init, 1178432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07a6000 - 0xc07e3000   ( 244 kB)
>      .data : 0xc0628bff - 0xc07448f4   (1135 kB)
>      .text : 0xc0400000 - 0xc0628bff   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4326.26 BogoMIPS (lpj=2163132)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0809000 soft=c07e9000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=2161261)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
>Total of 2 processors activated (8648.78 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -142 usecs TSC skew, fixed it up.
>CPU#1 had 142 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=45
>checking if image is initramfs... it is
>Freeing initrd memory: 2258k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: ee100000-ee1fffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: ee000000-ee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 4000-5fff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e4000000-e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 6000-7fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4100000-e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 8000-9fff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: e4200000-e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 0000a000-0000a0ff
>  IO window: 0000a400-0000a4ff
>  PREFETCH window: e0000000-e1ffffff
>  MEM window: e6000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-dfff
>  MEM window: e4300000-e7ffffff
>  PREFETCH window: e0000000-e3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1169217541.858:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A803A00FB8A89D68
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (65 C)
>ACPI: Thermal Zone [THM1] (64 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>ICH7: chipset revision 2
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
>cs: IO port probe 0xa000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 416k
>Time: tsc clocksource has been installed.
>Time: hpet clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>usb 5-6: new high speed USB device using ehci_hcd and address 2
>usb 5-6: configuration #1 chosen from 1 choice
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 4 ports detected
>usb 5-6.3: new low speed USB device using ehci_hcd and address 3
>usb 5-6.3: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input2
>input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.7-6.3
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xF8856500 ctl 0x0 bmdma 0x0 irq 218
>ata2: SATA max UDMA/133 cmd 0xF8856580 ctl 0x0 bmdma 0x0 irq 218
>ata3: SATA max UDMA/133 cmd 0xF8856600 ctl 0x0 bmdma 0x0 irq 218
>ata4: SATA max UDMA/133 cmd 0xF8856680 ctl 0x0 bmdma 0x0 irq 218
>scsi0 : ahci
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZO PQ: 0 ANSI: 5
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1169217548.462:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1585 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49500 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1169217548.725:3): policy loaded auid=4294967295
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /class/input/input4
>NET: Registered protocol family 23
>intel_rng: FWH not detected
>Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>pnp: Device 00:0a activated.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: No dongle connected
>e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:16:41:52:d9:83
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: ACPI Dock Station Driver 
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>e1000: eth1: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth1: no IPv6 routers present
>eth1: no IPv6 routers present
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff 0xe4e70000-0xe523ffff 0xe5db0000-0xe7ffffff
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide1...
>hdc: CF500, CFA DISK drive
>ide1 at 0xa100-0xa107,0xa10e on irq 3
>hdc: max request size: 128KiB
>hdc: 8060928 sectors (4127 MB) w/1KiB Cache, CHS=15744/16/32
> hdc:<4>hdc: lost interrupt
>hdc: lost interrupt
>hdc: lost interrupt
>pccard: card ejected from slot 0
>hdc: irq timeout: status=0xff { Busy }
>ide: failed opcode was: unknown
>ide1: reset timed-out, status=0xff
>hdc: status timeout: status=0xff { Busy }
>ide: failed opcode was: unknown
>hdc: drive not ready for command
>ide1: reset timed-out, status=0xff
>end_request: I/O error, dev hdc, sector 0
>Buffer I/O error on device hdc, logical block 0
>end_request: I/O error, dev hdc, sector 0
>Buffer I/O error on device hdc, logical block 0
>end_request: I/O error, dev hdc, sector 0
>Buffer I/O error on device hdc, logical block 0
> unable to read partition table
>ide-cs: hdc: Vpp = 0.0
>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c0405018>] dump_trace+0x69/0x1b6
> [<c040517d>] show_trace_log_lvl+0x18/0x2c
> [<c0405778>] show_trace+0xf/0x11
> [<c0405875>] dump_stack+0x15/0x17
> [<c043c402>] down_read+0x12/0x28
> [<c04fb299>] pci_find_device+0x60/0xaf
> [<c057140d>] init_hwif_default+0x28/0xeb
> [<c0572116>] ide_unregister+0x2d7/0x61e
> [<f8b10018>] ide_release+0x18/0x28 [ide_cs]
> [<f8b10030>] ide_detach+0x8/0x14 [ide_cs]
> [<c0583419>] pcmcia_device_remove+0x54/0xde
> [<c055e5ed>] __device_release_driver+0x60/0x78
> [<c055e999>] device_release_driver+0x32/0x48
> [<c055e068>] bus_remove_device+0x6d/0x7d
> [<c055cc30>] device_del+0x166/0x19a
> [<c055cc6c>] device_unregister+0x8/0x10
> [<c0583098>] pcmcia_card_remove+0x58/0x77
> [<c0583a56>] ds_event+0x56/0x87
> [<c057f727>] send_event+0x41/0x7e
> [<c057f92b>] socket_shutdown+0xc/0xd8
> [<c0580000>] pccardd+0x13b/0x1ee
> [<c0439810>] kthread+0xc0/0xec
> [<c0404c03>] kernel_thread_helper+0x7/0x10
> =======================
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide1...
>hdc: CF500, CFA DISK drive
>ide1 at 0xa100-0xa107,0xa10e on irq 3
>hdc: max request size: 128KiB
>hdc: 8060928 sectors (4127 MB) w/1KiB Cache, CHS=15744/16/32
> hdc:<4>hdc: lost interrupt
>hdc: lost interrupt
>hdc: lost interrupt
>hdc: lost interrupt
>hdc: lost interrupt

Actions: View

Attachments on bug 223463: 145991 | 294155 | 297355