Attachment 146075 Details for Bug 223645 – Output of lspci

Output of lspci

lspci.txt (text/plain), 7.09 KB, created by Sam Varshavchik on 2007-01-21 07:05:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sam Varshavchik

Created: 2007-01-21 07:05:18 UTC

Size: 7.09 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 32
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
>	Capabilities: [a0] AGP version 1.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
>00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: e4000000-e7ffffff
>	Prefetchable memory behind bridge: ec000000-edffffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
>
>00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Region 4: I/O ports at f000 [size=16]
>
>00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin D routed to IRQ 10
>	Region 4: I/O ports at a000 [size=32]
>
>00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin ? routed to IRQ 9
>
>00:0b.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
>	Subsystem: Hauppauge computer works Inc. WinTV PVR-350
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0d.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
>	Subsystem: Adaptec AHA-2940U2 SCSI Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (9750ns min, 6250ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 9
>	BIST result: 00
>	Region 0: I/O ports at a400 [disabled] [size=256]
>	Region 1: Memory at f0000000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at ee000000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 5
>	Region 0: I/O ports at a800 [size=32]
>
>00:11.0 Multimedia audio controller: Creative Labs SB Audigy LS
>	Subsystem: Creative Labs Unknown device 100a
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (500ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at ac00 [size=32]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:13.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 01)
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 120 (2000ns min, 2000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at b000 [size=8]
>	Region 1: I/O ports at b400 [size=4]
>	Region 4: I/O ports at b800 [size=256]
>	Expansion ROM at ef000000 [disabled by cmd] [size=128K]
>
>00:13.1 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 120 (2000ns min, 2000ns max)
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at bc00 [size=8]
>	Region 1: I/O ports at c000 [size=4]
>	Region 4: I/O ports at c400 [size=256]
>
>01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
>	Subsystem: 3Dfx Interactive, Inc. Voodoo3 3500 TV (NTSC)
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=32M]
>	Region 1: Memory at ec000000 (32-bit, prefetchable) [size=32M]
>	Region 2: I/O ports at 9000 [size=256]
>	Expansion ROM at e6000000 [disabled] [size=64K]
>	Capabilities: [54] AGP version 1.0
>		Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit+ FW- AGP3- Rate=x1,x2
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [60] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:00.0 0600: 8086:7190 (rev 03)
>00:01.0 0604: 8086:7191 (rev 03)
>00:07.0 0601: 8086:7110 (rev 02)
>00:07.1 0101: 8086:7111 (rev 01)
>00:07.2 0c03: 8086:7112 (rev 01)
>00:07.3 0680: 8086:7113 (rev 02)
>00:0b.0 0400: 4444:0803 (rev 01)
>00:0d.0 0100: 9005:0010
>00:0f.0 0200: 10ec:8029
>00:11.0 0401: 1102:0007
>00:13.0 0180: 1103:0004 (rev 01)
>00:13.1 0180: 1103:0004 (rev 01)
>01:00.0 0300: 121a:0005 (rev 01)

Actions: View

Attachments on bug 223645: 146074 | 146075 | 146674 | 146675