Attachment 146427 Details for Bug 224221 – dmesg with debug in udev.conf

dmesg with debug in udev.conf

dmesg.txt (text/plain), 17.90 KB, created by Nuno Dias on 2007-01-24 17:52:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nuno Dias

Created: 2007-01-24 17:52:15 UTC

Size: 17.90 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:32:37 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f740000 (usable)
> BIOS-e820: 000000003f740000 - 000000003f750000 (ACPI data)
> BIOS-e820: 000000003f750000 - 000000003f800000 (ACPI NVS)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259904) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259904
>early_node_map[1] active PFN ranges
>    0:        0 ->   259904
>On node 0 totalpages: 259904
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 238 pages used for memmap
>  HighMem zone: 30290 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f4b50
>ACPI: RSDT (v001 A M I  OEMRSDT  0x12000317 MSFT 0x00000097) @ 0x3f740000
>ACPI: FADT (v002 A M I  OEMFACP  0x12000317 MSFT 0x00000097) @ 0x3f740200
>ACPI: OEMB (v001 A M I  OEMBIOS  0x12000317 MSFT 0x00000097) @ 0x3f750040
>ACPI: DSDT (v001  0ABBD 0ABBD001 0x00000001 MSFT 0x02000001) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xe408
>Allocating PCI resources starting at 40000000 (gap: 3f800000:c0800000)
>Detected 1600.090 MHz processor.
>Built 1 zonelists.  Total pages: 257874
>Kernel command line: ro root=LABEL=/ quiet single
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07f6000 soft=c07d6000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1023616k/1039616k available (2177k kernel code, 15232k reserved, 1108k data, 240k init, 122112k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0795000 - 0xc07d1000   ( 240 kB)
>      .data : 0xc0620657 - 0xc07358f4   (1108 kB)
>      .text : 0xc0400000 - 0xc0620657   (2177 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3201.23 BogoMIPS (lpj=1600619)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0830)
>CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>SMP motherboard not detected.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1491k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs *4 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *4 6 12)
>ACPI: Power Resource [GFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x480-0x48f has been reserved
>pnp: 00:07: ioport range 0x4c0-0x4cf has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 2, cardbus bridge: 0000:01:05.0
>  IO window: 0000c000-0000c0ff
>  IO window: 0000c400-0000c4ff
>  PREFETCH window: 42000000-43ffffff
>  MEM window: 44000000-45ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fe700000-fe8fffff
>  PREFETCH window: de500000-de6fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1169658605.783:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5FA3A1EB952EC724
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: Transitioning device [FN00] to D3
>ACPI: Transitioning device [FN00] to D3
>ACPI: Fan [FN00] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (65 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855 Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
>PCI: setting IRQ 4 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IC25N060ATMR04-0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: MATSHITADVD-RAM UJ-810, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:01:05.0 [1043:1744]
>Yenta: ISA IRQ mask 0x04a8, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>cs: IO port probe 0xc000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfe700000 - 0xfe8fffff
>pcmcia: parent PCI bridge Memory window: 0xde500000 - 0xde6fffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 400k
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000d480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 4, io base 0x0000d880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 4 (level, low) -> IRQ 4
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 4, io mem 0xfebff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0x804719/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>SCSI subsystem initialized
>libata version 2.00 loaded.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1169658616.338:2): selinux=0 auid=4294967295
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>NET: Registered protocol family 23
>nsc-ircc, chip->init
>pnp: Device 00:0a disabled.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee1394: Initialized config rom entry `ip1394'
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x6460)
>iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
>ipw2100: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>ipw2100: eth0: Firmware 'ipw2100-1.3.fw' not available or load failed.
>ipw2100: eth0: ipw2100_get_firmware failed: -2
>ipw2100: eth0: Failed to power on the adapter.
>ipw2100: eth0: Failed to start the firmware.
>ipw2100Error calling register_netdev.
>ACPI: PCI interrupt for device 0000:01:04.0 disabled
>ipw2100: probe of 0000:01:04.0 failed with error -5
>ACPI: PCI Interrupt 0000:01:05.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[fe8ff000-fe8ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003174be0]
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xfe8fe000, irq 11, MAC addr 00:0E:A6:8E:69:74
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input2
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50202 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Lid Switch [LID]
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kobject_add failed for vcs1 with -EEXIST, don't try to register things with the same name in the same directory.
> [<c040566b>] dump_trace+0x69/0x1b6
> [<c04057d0>] show_trace_log_lvl+0x18/0x2c
> [<c0405dc6>] show_trace+0xf/0x11
> [<c0405ec3>] dump_stack+0x15/0x17
> [<c04eaf76>] kobject_add+0x16d/0x196
> [<c0556e96>] class_device_add+0xa2/0x3f6
> [<c055727c>] class_device_create+0x82/0xa2
> [<c053d2e4>] vcs_make_sysfs+0x3c/0x7e
> [<c05421ca>] con_open+0x6f/0x7c
> [<c0538009>] tty_open+0x17c/0x303
> [<c0473c1e>] chrdev_open+0xfb/0x12f
> [<c0470193>] __dentry_open+0xc7/0x1ab
> [<c04702f1>] nameidata_to_filp+0x24/0x33
> [<c0470337>] do_filp_open+0x37/0x3e
> [<c0470384>] do_sys_open+0x46/0xc8
> [<c047043f>] sys_open+0x1c/0x1e
> [<c0404057>] syscall_call+0x7/0xb
> [<00110402>] 0x110402
> =======================
>kobject_add failed for vcsa1 with -EEXIST, don't try to register things with the same name in the same directory.
> [<c040566b>] dump_trace+0x69/0x1b6
> [<c04057d0>] show_trace_log_lvl+0x18/0x2c
> [<c0405dc6>] show_trace+0xf/0x11
> [<c0405ec3>] dump_stack+0x15/0x17
> [<c04eaf76>] kobject_add+0x16d/0x196
> [<c0556e96>] class_device_add+0xa2/0x3f6
> [<c055727c>] class_device_create+0x82/0xa2
> [<c053d321>] vcs_make_sysfs+0x79/0x7e
> [<c05421ca>] con_open+0x6f/0x7c
> [<c0538009>] tty_open+0x17c/0x303
> [<c0473c1e>] chrdev_open+0xfb/0x12f
> [<c0470193>] __dentry_open+0xc7/0x1ab
> [<c04702f1>] nameidata_to_filp+0x24/0x33
> [<c0470337>] do_filp_open+0x37/0x3e
> [<c0470384>] do_sys_open+0x46/0xc8
> [<c047043f>] sys_open+0x1c/0x1e
> [<c0404057>] syscall_call+0x7/0xb
> [<00110402>] 0x110402
> =======================

Actions: View

Attachments on bug 224221: 146427