Attachment 146753 Details for Bug 225046 – dmesg log

dmesg log

dmesg (text/plain), 21.53 KB, created by Michael Norred on 2007-01-27 22:18:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Norred

Created: 2007-01-27 22:18:04 UTC

Size: 21.53 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:28:18 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001be80000 (usable)
> BIOS-e820: 000000001be80000 - 000000001be92000 (ACPI data)
> BIOS-e820: 000000001be92000 - 000000001bf00000 (ACPI NVS)
> BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>446MB LOWMEM available.
>found SMP MP-table at 000f7dc0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114304) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114304
>  HighMem    114304 ->   114304
>early_node_map[1] active PFN ranges
>    0:        0 ->   114304
>On node 0 totalpages: 114304
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 861 pages used for memmap
>  Normal zone: 109347 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 TOSINV                                ) @ 0x000f7d10
>ACPI: XSDT (v001 TOSINV TOSINV00 0x06040000  LTP 0x00000000) @ 0x1be8cb66
>ACPI: FADT (v003 TOSINV Bonefish 0x06040000 ATI  0x000f4240) @ 0x1be91d0a
>ACPI: MADT (v001 TOSINV 	 APIC   0x06040000  LTP 0x00000000) @ 0x1be91dfe
>ACPI: SLIC (v001 TOSINV TOSINV00 0x06040000  INV 0x00000000) @ 0x1be91e4e
>ACPI: MCFG (v001 TOSINV   MCFG   0x06040000  LTP 0x00000000) @ 0x1be91fc4
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20050228) @ 0x1be8d0ef
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050228) @ 0x1be8cbba
>ACPI: DSDT (v001 TOSINV    SB450 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1c000000:c4000000)
>Detected 1596.132 MHz processor.
>Built 1 zonelists.  Total pages: 113411
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0808000 soft=c07e8000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 445504k/457216k available (2210k kernel code, 11116k reserved, 1135k data, 244k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdbe80000   ( 446 MB)
>      .init : 0xc07a6000 - 0xc07e3000   ( 244 kB)
>      .data : 0xc0628bff - 0xc07448f4   (1135 kB)
>      .text : 0xc0400000 - 0xc0628bff   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3195.29 BogoMIPS (lpj=1597645)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c109 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9f3ff 00000000 00000000 00000940 0000c109 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Celeron(R) M CPU        420  @ 1.60GHz stepping 08
>Total of 1 processors activated (3195.29 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2253k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: Power Resource [FN00] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
>pnp: 00:08: ioport range 0x220-0x22f has been reserved
>pnp: 00:08: ioport range 0x400-0x401 has been reserved
>pnp: 00:08: ioport range 0x40b-0x40b has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: d0000000-d00fffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: d0100000-d01fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 12, cardbus bridge: 0000:0b:06.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 24000000-25ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: d0200000-d02fffff
>  PREFETCH window: 20000000-21ffffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Enabling device 0000:0b:06.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:0b:06.0[A] -> GSI 23 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1169914902.754:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A803A00FB8A89D68
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>Allocate Port Service[0000:00:06.0:pcie03]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie01]
>Allocate Port Service[0000:00:07.0:pcie03]
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - No ACPI _OSC support
>aer: probe of 0000:00:04.0:pcie01 failed with error 1
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - No ACPI _OSC support
>aer: probe of 0000:00:06.0:pcie01 failed with error 1
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - No ACPI _OSC support
>aer: probe of 0000:00:07.0:pcie01 failed with error 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Fan [FAN0] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [TZ00] (51 C)
>ACPI: Invalid passive threshold
>ACPI: Transitioning device [FAN0] to D0
>ACPI: Transitioning device [FAN0] to D0
>ACPI: Unable to turn cooling device [dbc0a93c] 'on'
>ACPI: Thermal Zone [TZ01] (47 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:0b:06.0 [1179:ff10]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0b:06.0, mfunc 0x01111002, devctl 0x44
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>cs: IO port probe 0xa000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 416k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0504000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0505000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 18, io mem 0xd0506000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000
>synaptics: Toshiba Satellite M115 detected, limiting rate to 40pps.
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:12.0: version 2.0
>PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
>ata1: SATA max UDMA/100 cmd 0xDC82C080 ctl 0xDC82C08A bmdma 0xDC82C000 irq 19
>ata2: SATA max UDMA/100 cmd 0xDC82C0C0 ctl 0xDC82C0CA bmdma 0xDC82C008 irq 19
>scsi0 : sata_sil
>usb 1-1: new low speed USB device using ohci_hcd and address 3
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : sata_sil
>usb 1-1: configuration #1 chosen from 1 choice
>input: USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.0-1
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 > sda4
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1586 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49636 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1169914911.305:2): policy loaded auid=4294967295
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:0b:07.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xdc85e000, 00:a0:d1:5a:eb:c0, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>input: PC Speaker as /class/input/input3
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
> printing eip:
>dc9f272f
>*pde = 00000000
>Oops: 0002 [#1]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/type
>Modules linked in: snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd i2c_piix4 ide_cd i2c_core soundcore snd_page_alloc pcspkr 8139cp serio_raw 8139too mii cdrom dm_snapshot dm_zero dm_mirror dm_mod sata_sil libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    0
>EIP:    0060:[<dc9f272f>]    Not tainted VLI
>EFLAGS: 00010202   (2.6.19-1.2895.fc6 #1)
>EIP is at get_input_type+0x67/0x85 [snd_hda_codec]
>eax: 00000007   ebx: db356980   ecx: 00000002   edx: 00000000
>esi: 00000000   edi: d99fb0c8   ebp: d99fb0c0   esp: da310ce0
>ds: 007b   es: 007b   ss: 0068
>Process modprobe (pid: 980, ti=da310000 task=da2fd2d0 task.ti=da310000)
>Stack: d99fb4c0 dc9f3393 dc9fb7ca dc9fb76f 00000074 da310d28 c046100c daab5440 
>       db356980 db3569a4 db0c2400 dc970470 da310d50 00000004 da26fd68 da310d90 
>       da26fc00 00000001 da26fc00 da26fd80 00000001 dc970a24 00000000 da26fd4c 
>Call Trace:
> [<dc9f3393>] build_generic_controls+0x228/0x305 [snd_hda_codec]
> [<dc9f2314>] snd_hda_build_controls+0x16/0x6c [snd_hda_codec]
> [<dc9bc465>] azx_probe+0x6f4/0x706 [snd_hda_intel]
> [<c04fae45>] pci_device_probe+0x36/0x57
> [<c055e6f8>] really_probe+0x39/0xda
> [<c055e92f>] __driver_attach+0x73/0xab
> [<c055de08>] bus_for_each_dev+0x37/0x59
> [<c055e61b>] driver_attach+0x16/0x18
> [<c055e0d9>] bus_add_driver+0x61/0x165
> [<c04faf9d>] __pci_register_driver+0x6f/0x89
> [<c044302e>] sys_init_module+0x17ff/0x19aa
> [<c040404b>] syscall_call+0x7/0xb
> [<00dd8402>] 0xdd8402
> =======================
>Code: f9 02 b8 0b b7 9f dc eb 17 ba 10 b7 9f dc eb 35 83 e1 0f ba 13 b7 9f dc 83 f9 02 b8 1d b7 9f dc 0f 45 d0 eb 20 f6 43 15 10 74 03 <83> 0a 04 83 e1 0f ba 21 b7 9f dc 83 f9 02 b8 2b b7 9f dc eb e0 
>EIP: [<dc9f272f>] get_input_type+0x67/0x85 [snd_hda_codec] SS:ESP 0068:da310ce0
> <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
>cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
>cs: IO port probe 0xa00-0xaff: clean.
>floppy0: no floppy controllers found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 917496k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:917496k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 225046: 146753