Attachment 146994 Details for Bug 223643 – dmesg output when booted with cpufreq.debug=7

dmesg output when booted with cpufreq.debug=7

dmesg.txt (text/plain), 22.44 KB, created by David Fawcett on 2007-01-31 02:10:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Fawcett

Created: 2007-01-31 02:10:24 UTC

Size: 22.44 KB

patch

obsolete

>a, 244k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdffdb000   ( 511 MB)
>      .init : 0xc07a6000 - 0xc07e3000   ( 244 kB)
>      .data : 0xc0628bff - 0xc07448f4   (1135 kB)
>      .text : 0xc0400000 - 0xc0628bff   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1403.94 BogoMIPS (lpj=701971)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0820)
>CPU0: Intel Pentium III (Coppermine) stepping 0a
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2253k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc12e, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-083f claimed by PIIX4 ACPI
>PCI quirk: region 0840-084f claimed by PIIX4 SMB
>PIIX4 devres B PIO at 00e0-00e7
>PIIX4 devres C PIO at 0850-085f
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 could not be reserved
>pnp: 00:02: ioport range 0x808-0x80f could not be reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x850-0x853 has been reserved
>pnp: 00:03: ioport range 0x856-0x85f has been reserved
>pnp: 00:03: ioport range 0x810-0x83f has been reserved
>pnp: 00:03: ioport range 0x840-0x84f has been reserved
>pnp: 00:03: ioport range 0x600-0x67f has been reserved
>pnp: 00:03: ioport range 0x680-0x6ff has been reserved
>pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fd000000-feffffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bus 2, cardbus bridge: 0000:00:03.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 32000000-33ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:03.1
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 34000000-35ffffff
>  MEM window: 36000000-37ffffff
>PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>speedstep-lib: x86: 6, model: 8
>speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x46480020, 0x0
>speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0x4a550000
>speedstep-ich: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
>speedstep-lib: x86: 6, model: 8
>speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x46480020, 0x0
>speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0x4a550000
>speedstep-smi: signature:0x47534943, command:0x008200b2, event:0x00000000, perf_level:0x00000001.
>cpufreq-core: trying to register driver speedstep-smi
>cpufreq-core: adding CPU 0
>speedstep-smi: trying to obtain ownership with command 47534982 at port b2
>speedstep-smi: result is 0
>speedstep-smi: bug #1422 -- can't read freqs from BIOS
>speedstep-smi: could not detect low and high frequencies by SMI call.
>speedstep-lib: trying to determine both speeds
>speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x46480020 0x0
>speedstep-lib: speed is 700000
>speedstep-lib: previous speed is 700000
>speedstep-smi: trying to set frequency to state 1 with command 47534982 at port b2
>speedstep-smi: retry 1, previous result 0, waiting...
>speedstep-smi: retry 2, previous result 0, waiting...
>speedstep-smi: retry 3, previous result 0, waiting...
>speedstep-smi: retry 4, previous result 0, waiting...
>speedstep-smi: retry 5, previous result 0, waiting...
>speedstep-smi: change to 0 MHz succeeded after 6 tries with result 0
>speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x46480020 0x0
>speedstep-lib: speed is 700000
>speedstep-lib: low speed is 700000
>speedstep-smi: trying to set frequency to state 0 with command 47534982 at port b2
>speedstep-smi: retry 1, previous result 0, waiting...
>speedstep-smi: retry 2, previous result 0, waiting...
>speedstep-smi: retry 3, previous result 0, waiting...
>speedstep-smi: retry 4, previous result 0, waiting...
>speedstep-smi: retry 5, previous result 0, waiting...
>speedstep-smi: change to 0 MHz succeeded after 6 tries with result 0
>speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4ec80020 0x0
>speedstep-lib: speed is 1000000
>speedstep-lib: high speed is 1000000
>speedstep-smi: trying to set frequency to state 1 with command 47534982 at port b2
>speedstep-smi: retry 1, previous result 0, waiting...
>speedstep-smi: retry 2, previous result 0, waiting...
>speedstep-smi: retry 3, previous result 0, waiting...
>speedstep-smi: retry 4, previous result 0, waiting...
>speedstep-smi: retry 5, previous result 0, waiting...
>speedstep-smi: change to 700 MHz succeeded after 6 tries with result 0
>speedstep-smi: workaround worked.
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>speedstep-smi: currently at low speed setting - 700 MHz
>freq-table: table entry 0: 1000000 kHz, 0 index
>freq-table: table entry 1: 700000 kHz, 1 index
>freq-table: setting show_table for cpu 0 to c0696c3c
>cpufreq-core: setting new policy for CPU 0: 700000 - 1000000 kHz
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 700000 - 1000000 kHz
>cpufreq-core: governor switch
>cpufreq-core: __cpufreq_governor for CPU 0, event 1
>userspace: managing cpu 0 started (700000 - 1000000 kHz, currently 700000 kHz)
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 700000 - 1000000 kHz,currently 700000 kHz, last set to 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>freq-table: target is 1 (700000 kHz, 1)
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>cpufreq-core: initialization complete
>cpufreq-core: driver speedstep-smi up and running
>Dell Inspiron machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1170186889.399:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A803A00FB8A89D68
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>cpufreq-core: updating policy for CPU 0
>speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x46480020 0x0
>speedstep-lib: speed is 700000
>cpufreq-core: setting new policy for CPU 0: 700000 - 1000000 kHz
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 700000 - 1000000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 700000 - 1000000 kHz,currently 700000 kHz, last set to 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>freq-table: target is 1 (700000 kHz, 1)
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THM] (32 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST9808211A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: MATSHITA CD-RW/DVD-ROM UJDA740, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:00:03.0 [1028:00b0]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x64
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000020
>Yenta: CardBus bridge found at 0000:00:03.1 [1028:00b0]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x64
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000006
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 416k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>pccard: CardBus card inserted into slot 0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>SCSI subsystem initialized
>libata version 2.00 loaded.
>Synaptics Touchpad, model: 1, fw: 5.5, id: 0x9b58b1, caps: 0x804793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1170186898.954:2): selinux=0 auid=4294967295
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>wlan: 0.8.4.2 (0.9.2.1)
>ath_rate_sample: 1.2 (0.9.2.1)
>ath_pci: 0.9.4.5 (0.9.2.1)
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 7.9 phy 4.5 radio 5.6
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>wifi0: Atheros 5212: mem=0x32000000, irq=11
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>input: PC Speaker as /class/input/input3
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>maestro3: enabled hack for 'Dell Inspiron 4000'
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PBTN]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: ACPI Dock Station Driver 
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524280k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:524280k
>Adding 1048568k swap on /swapfile.  Priority:-2 extents:453 across:3176088k
>cpufreq-core: setting new policy for CPU 0: 700000 - 1000000 kHz
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 700000 - 1000000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 700000 - 1000000 kHz,currently 700000 kHz, last set to 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>freq-table: target is 1 (700000 kHz, 1)
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>cpufreq-core: setting new policy for CPU 0: 700000 - 1000000 kHz
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>freq-table: request for verification of policy (700000 - 1000000 kHz) for cpu 0
>freq-table: verification lead to (700000 - 1000000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 700000 - 1000000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 700000 - 1000000 kHz,currently 700000 kHz, last set to 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>freq-table: target is 1 (700000 kHz, 1)
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>freq-table: target is 1 (700000 kHz, 1)
>speedstep-smi: trying to determine current setting with command 47534982 at port b2
>speedstep-smi: state is 1, result is 0
>userspace: cpufreq_set for cpu 0, freq 725000 kHz
>cpufreq-core: target for CPU 0: 725000 kHz, relation 0
>freq-table: request for target 725000 kHz (relation: 0) for cpu 0
>freq-table: target is 0 (1000000 kHz, 0)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4094 buckets, 32752 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>printk: 185 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>ath0: no IPv6 routers present
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>printk: 50 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>printk: 15 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>cpufreq-core: target for CPU 0: 1000000 kHz, relation 0
>freq-table: request for target 1000000 kHz (relation: 0) for cpu 0
>freq-table: target is 0 (1000000 kHz, 0)
>printk: 13 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>freq-table: request for target 700000 kHz (relation: 0) for cpu 0
>printk: 14 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>cpufreq-core: target for CPU 0: 1000000 kHz, relation 0
>printk: 15 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>cpufreq-core: target for CPU 0: 700000 kHz, relation 0
>printk: 15 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 1000000 kHz
>printk: 16 messages suppressed.
>userspace: cpufreq_set for cpu 0, freq 700000 kHz
>[root@localhost ~]#

Actions: View

Attachments on bug 223643: 146994