Attachment 147059 Details for Bug 165676 – uname -a; ethtool eth0; lspci -vvv | grep -A15 Ethernet

uname -a; ethtool eth0; lspci -vvv | grep -A15 Ethernet

e1000.txt (text/plain), 3.24 KB, created by Ingvar Hagelund on 2007-01-31 22:28:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ingvar Hagelund

Created: 2007-01-31 22:28:44 UTC

Size: 3.24 KB

patch

obsolete

>Linux bullseye.zett.no 2.4.21-40.EL #1 Thu Feb 2 22:32:00 EST 2006 i686 i686 i386 GNU/Linux
>Settings for eth0:
>	Supported ports: [ FIBRE ]
>	Supported link modes:   1000baseT/Full 
>	Supports auto-negotiation: Yes
>	Advertised link modes:  1000baseT/Full 
>	Advertised auto-negotiation: Yes
>	Speed: 1000Mb/s
>	Duplex: Full
>	Port: FIBRE
>	PHYAD: 0
>	Transceiver: internal
>	Auto-negotiation: off
>	Supports Wake-on: umbg
>	Wake-on: d
>	Current message level: 0x00000007 (7)
>	Link detected: yes
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (4250ns min, 4500ns max), cache line size 10
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at ec00 [size=256]
>	Region 1: Memory at dfdf0000 (64-bit, non-prefetchable) [size=64K]
>	Region 3: Memory at dfde0000 (64-bit, non-prefetchable) [size=64K]
>	Expansion ROM at dfe00000 [disabled] [size=1M]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [68] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=4
>		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>05:04.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
>	Subsystem: Dell: Unknown device 018a
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), cache line size 10
>	Interrupt: pin A routed to IRQ 15
>	Region 0: Memory at dfbe0000 (64-bit, non-prefetchable) [size=128K]
>	Region 4: I/O ports at dcc0 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device.
>		Command: DPERE- ERO+ RBC=0 OST=0
>		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>05:04.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
>	Subsystem: Dell: Unknown device 018a
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), cache line size 10
>	Interrupt: pin B routed to IRQ 7
>	Region 0: Memory at dfbc0000 (64-bit, non-prefetchable) [size=128K]
>	Region 4: I/O ports at dc80 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device.
>		Command: DPERE- ERO+ RBC=0 OST=0
>		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>

Actions: View

Attachments on bug 165676: 147059