Attachment 147264 Details for Bug 227189 – output from dmesg

output from dmesg

dmesg.txt (text/plain), 24.80 KB, created by Bill Strossman on 2007-02-03 00:52:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bill Strossman

Created: 2007-02-03 00:52:54 UTC

Size: 24.80 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6xen (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:47:12 EST 2007
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000076dcb000 (usable)
>1173MB HIGHMEM available.
>727MB LOWMEM available.
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 486859) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   186366
>  Normal     186366 ->   186366
>  HighMem    186366 ->   486859
>early_node_map[1] active PFN ranges
>    0:        0 ->   486859
>On node 0 totalpages: 486859
>  DMA zone: 1455 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 184911 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 2347 pages used for memmap
>  HighMem zone: 298146 pages, LIFO batch:31
>found SMP MP-table at 000fe710
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x000febf0
>ACPI: XSDT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fcee0
>ACPI: FADT (v003 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd008
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0xfff55f75
>ACPI: MADT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd0fc
>ACPI: BOOT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd18e
>ACPI: ASF! (v032 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd1b6
>ACPI: MCFG (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd248
>ACPI: HPET (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd286
>ACPI: TCPA (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd4e2
>  >>> ERROR: Invalid checksum
>ACPI: SLIC (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x000fd2be
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists.  Total pages: 483057
>Kernel command line: ro root=LABEL=/ rhgb quiet all-generic-ide
>IDE generic will claim all unknown PCI IDE storage controllers.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07e0000 soft=c07c0000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 2394.182 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: 0x00000000c0d9b000 - 0x00000000c0f9b000
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 1908520k/1947436k available (2166k kernel code, 29716k reserved, 1100k data, 184k init, 1201972k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
>    pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
>    vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xed7fe000   ( 727 MB)
>      .init : 0xc078e000 - 0xc07bc000   ( 184 kB)
>      .data : 0xc061da2c - 0xc0730bf4   (1100 kB)
>      .text : 0xc0400000 - 0xc061da2c   (2166 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5987.06 BogoMIPS (lpj=11974133)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU 1 irqstacks, hard=c07e1000 soft=c07c1000
>ENABLING IO-APIC IRQs
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>sizeof(vma)=88 bytes
>Initializing CPU#1
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=20
>checking if image is initramfs... it is
>Freeing initrd memory: 3396k freed
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e8000000-efefffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: e7f00000-e7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: e7e00000-e7efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: e7d00000-e7dfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1170408857.972:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A803A00FB8A89D68
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>hda: TSSTcorpDVD-ROM TS-H352C, ATAPI CD/DVD-ROM drive
>hdb: PHILIPS DVD+/-RW DVD8801, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 387k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 4 ports detected
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xEE03E100 ctl 0x0 bmdma 0x0 irq 22
>ata2: SATA max UDMA/133 cmd 0xEE03E180 ctl 0x0 bmdma 0x0 irq 22
>ata3: SATA max UDMA/133 cmd 0xEE03E200 ctl 0x0 bmdma 0x0 irq 22
>ata4: SATA max UDMA/133 cmd 0xEE03E280 ctl 0x0 bmdma 0x0 irq 22
>scsi0 : ahci
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /class/input/input0
>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-1
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>usb 2-2: configuration #1 chosen from 1 choice
>input: DELL DELL USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 8
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      HDS728080PLA380  PF2O PQ: 0 ANSI: 5
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>scsi 2:0:0:0: Direct-Access     ATA      ST3160812AS      3.AD PQ: 0 ANSI: 5
>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 2:0:0:0: Attached scsi disk sdb
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1586 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49636 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1170408863.752:2): policy loaded auid=4294967295
>hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: ATAPI CD-ROM drive, 0kB Cache, UDMA(33)
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>intel_rng: FWH not detected
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /class/input/input2
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000BaseT Ethernet 00:18:8b:85:17:05
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>ieee1394: Initialized config rom entry `ip1394'
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>FDC 0 is a post-1991 82077
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[e7dff000-e7dff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000d10080a7c3d6]
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>Adding 4192924k swap on /dev/sdb5.  Priority:-1 extents:1 across:4192924k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1170437734.421:3): avc:  denied  { read } for  pid=2197 comm="dhclient" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1170437734.421:4): avc:  denied  { getattr } for  pid=2197 comm="dhclient" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>audit(1170437793.500:5): avc:  denied  { read } for  pid=2384 comm="syslogd" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:syslogd_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1170437793.500:6): avc:  denied  { getattr } for  pid=2384 comm="syslogd" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:syslogd_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1170437793.880:7): avc:  denied  { read } for  pid=2449 comm="rpc.statd" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:rpcd_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1170437793.880:8): avc:  denied  { getattr } for  pid=2449 comm="rpc.statd" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:rpcd_t:s0 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>audit(1170437796.149:9): avc:  denied  { read } for  pid=2673 comm="cupsd" name="services" dev=sdb1 ino=33182 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023 tcontext=root:object_r:rpm_script_tmp_t:s0 tclass=file
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command
>hdb: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdb: drive not ready for command

Actions: View

Attachments on bug 227189: 147264