Attachment 147272 Details for Bug 227202 – dmesg

dmesg

dmesg.020107 (text/plain), 15.94 KB, created by Dave Gutz on 2007-02-03 13:47:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dave Gutz

Created: 2007-02-03 13:47:59 UTC

Size: 15.94 KB

patch

obsolete

>Linux version 2.6.9-42.0.2.EL (buildsvn@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 Tue Aug 22 23:56:05 CDT 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
> BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data)
> BIOS-e820: 000000003ffcf000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>zapping low mappings.
>On node 0 totalpages: 262080
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 32704 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fac80
>ACPI: RSDT (v001 A M I  OEMRSDT  0x02000404 MSFT 0x00000097) @ 0x3ffc0000
>ACPI: FADT (v002 A M I  OEMFACP  0x02000404 MSFT 0x00000097) @ 0x3ffc0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x02000404 MSFT 0x00000097) @ 0x3ffc0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x02000404 MSFT 0x00000097) @ 0x3ffcf040
>ACPI: DSDT (v001  PSLE1 PSLE1112 0x00000112 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0400000 soft=c03ff000
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 3200.816 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1034384k/1048320k available (2150k kernel code, 13100k reserved, 716k data, 164k init, 130816k highmem)
>Calibrating delay using timer specific routine.. 6403.98 BogoMIPS (lpj=3201990)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>BIOS bug: Legacy-free FADT detected, but FADT size (129) is incorrect!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking if image is initramfs... it is
>Freeing initrd memory: 493k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
>ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 21 (level, low) -> IRQ 209
>ACPI: PCI interrupt 0000:02:0f.0[A] -> GSI 19 (level, low) -> IRQ 177
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1170349081.242:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 5A9A04024D0CEFA
>- User ID: CentOS (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 865 Chipset.
>agpgart: Maximum main memory to use for agp memory: 941M
>agpgart: AGP aperture is 64M @ 0xf8000000
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: SAMSUNG SP1604N, ATA DISK drive
>hdb: ST3200822A, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
>hdd: SAMSUNG CD-R/RW SW-252S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: max request size: 1024KiB
>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>hdb: max request size: 1024KiB
>hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 >
>hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 16X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 131072 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 262144 bind 131072)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI wakeup devices: 
>P0P4 BNIC MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M 
>Freeing unused kernel memory: 164k freed
>SCSI subsystem initialized
>libata version 1.20 loaded.
>ata_piix 0000:00:1f.2: version 1.05
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 185
>ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 185
>ata1: SATA port has no device.
>scsi0 : ata_piix
>ata2: SATA port has no device.
>scsi1 : ata_piix
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 4 roles, 355 types, 26 bools
>security:  55 classes, 22582 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hdb7, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>inserting floppy driver for 2.6.9-42.0.2.EL
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI interrupt 0000:02:0f.0[A] -> GSI 19 (level, low) -> IRQ 177
>divert: allocating divert_blk for eth0
>eth0: RealTek RTL8139 at 0xb400, 00:0e:a6:81:32:3c, IRQ 177
>eth0:  Identified 8139 chip type 'RTL-8101'
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50038 usecs
>intel8x0: clocking to 48000
>hw_random: RNG not detected
>ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 193, pci mem f88bec00
>SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 169, io base 0000e000
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 177, io base 0000e400
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 185, io base 0000e800
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: irq 169, io base 0000ec00
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>usb 2-1: new full speed USB device using address 2
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0384d60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on hdb7, internal journal
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>cdrom: open failed.
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hdb6, type ext3), uses xattr
>SELinux: initialized (dev hdb5, type vfat), uses genfs_contexts
>Adding 2040244k swap on /dev/hdb3.  Priority:-1 extents:1
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 updated from revision 0x7 to 0xc, date = 04212005 
>IA-32 Microcode Update Driver v1.14 unregistered
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8190 buckets, 65520 max) - 356 bytes per conntrack
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>i2c /dev entries driver
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>eth0: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts

Actions: View

Attachments on bug 227202: 147272