Attachment 147273 Details for Bug 227203 – output of dmesg

output of dmesg

dmesg.output (text/plain), 23.96 KB, created by Bernd Bartmann on 2007-02-03 14:29:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernd Bartmann

Created: 2007-02-03 14:29:16 UTC

Size: 23.96 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:28:18 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f52c0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524272) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>On node 0 totalpages: 524272
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292593 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f6db0
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3000
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3040
>ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff7080
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Detected 3014.507 MHz processor.
>Built 1 zonelists.  Total pages: 520177
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0808000 soft=c07e8000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2072124k/2097088k available (2210k kernel code, 23636k reserved, 1135k data, 244k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07a6000 - 0xc07e3000   ( 244 kB)
>      .data : 0xc0628bff - 0xc07448f4   (1135 kB)
>      .text : 0xc0400000 - 0xc0628bff   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6031.58 BogoMIPS (lpj=3015794)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0809000 soft=c07e9000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6028.12 BogoMIPS (lpj=3014060)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>Total of 2 processors activated (12059.70 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=10
>checking if image is initramfs... it is
>Freeing initrd memory: 1491k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb6c0, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: c0000000-dfffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: a000-afff
>  MEM window: ea000000-ea0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: ea100000-ea1fffff
>  PREFETCH window: ea200000-ea2fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1170504425.749:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A803A00FB8A89D68
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 416k
>Time: tsc clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xea300000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac6
>ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
>ata: 0x170 IDE port busy
>ata: conflict with ide1
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
>ata2: DUMMY
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1614C  SW10 PQ: 0 ANSI: 5
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>usb 5-5: new high speed USB device using ehci_hcd and address 2
>sd 0:0:0:0: Attached scsi disk sda
>usb 5-5: configuration #1 chosen from 1 choice
>hub 5-5:1.0: USB hub found
>hub 5-5:1.0: 4 ports detected
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-6: new high speed USB device using ehci_hcd and address 3
>audit(1170504429.281:2): enforcing=1 old_enforcing=0 auid=4294967295
>usb 5-6: configuration #1 chosen from 1 choice
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 4 ports detected
>security:  3 users, 6 roles, 1586 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49636 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1170504429.460:3): policy loaded auid=4294967295
>usb 5-5.1: new full speed USB device using ehci_hcd and address 4
>usb 5-5.1: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /class/input/input0
>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-5.1
>hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-5.1
>usb 5-5.2: new low speed USB device using ehci_hcd and address 5
>usb 5-5.2: configuration #1 chosen from 1 choice
>input: Cherry GmbH as /class/input/input1
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.7-5.2
>Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:61:18:9c:2c
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ieee1394: Initialized config rom entry `ip1394'
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>EDAC MC: Ver: 2.0.1 Jan 10 2007
>ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 22 (level, low) -> IRQ 20
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[ea105000-ea1057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
>input: PC Speaker as /class/input/input2
>EDAC i82875p: i82875p init one
>PCI: Unable to reserve mem region #1:1000@fecf0000 for device 0000:00:06.0
>EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0
>intel_rng: FWH not detected
>hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>Linux video capture interface: v2.00
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 917kHz
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>saa7146: register extension 'budget_ci dvb'.
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>saa7146: register extension 'budget_av'.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>intel8x0_measure_ac97_clock: measured 51612 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 21 (level, low) -> IRQ 22
>saa7146: found saa7146 @ mem f8b20000 (revision 1, irq 22) (0x13c2,0x1011).
>saa7146 (0): dma buffer size 192512
>DVB: registering new adapter (TT-Budget/WinTV-NOVA-T	 PCI).
>adapter has MAC addr = 00:d0:5c:22:19:13
>input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3
>DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 18 (level, low) -> IRQ 18
>bttv0: Bt878 (rev 2) at 0000:03:04.0, irq: 18, latency: 32, mmio: 0xea200000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>tveeprom 2-0050: Hauppauge model 61324, rev D129, serial# 3489953
>tveeprom 2-0050: tuner model is Temic 4006FH5 (idx 29, type 14)
>tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
>tveeprom 2-0050: audio processor is MSP3415 (idx 6)
>tveeprom 2-0050: has radio
>bttv0: Hauppauge eeprom indicates model#61324
>bttv0: using tuner=14
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp3400 2-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw])
>msp3400 2-0040: MSP3410D-B4 supports nicam, mode is autodetect
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000d610000141c56]
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
>tuner 2-0061: type set to 14 (Temic PAL_BG (4006FH5))
>tuner 2-0061: type set to 14 (Temic PAL_BG (4006FH5))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>ACPI: PCI Interrupt 0000:03:04.1[A] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 20
>saa7146: found saa7146 @ mem f8d5e000 (revision 1, irq 20) (0x153b,0x1156).
>saa7146 (1): dma buffer size 192512
>DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
>adapter failed MAC signature check
>encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
>bt878: AUDIO driver version 0.0.0 loaded
>KNC1-1: MAC addr = 00:0a:ac:01:9e:5e
>DVB: registering frontend 1 (Philips TDA10021 DVB-C)...
>budget-av: ci interface initialised.
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
>[fglrx] module loaded - fglrx 8.33.6 [Jan  8 2007] on minor 0
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1 across:4096564k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1170500859.290:4): audit_pid=2637 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Loading iSCSI transport class v2.0-724.<5>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>tda1004x: found firmware revision 0 -- invalid
>tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
>eth0: no IPv6 routers present
>tda1004x: firmware upload complete
>tda1004x: found firmware revision 2c -- ok
>idr_remove called for id=0 which is not allocated.
> [<c0405018>] dump_trace+0x69/0x1b6
> [<c040517d>] show_trace_log_lvl+0x18/0x2c
> [<c0405778>] show_trace+0xf/0x11
> [<c0405875>] dump_stack+0x15/0x17
> [<c04ee78d>] idr_remove+0xe0/0x141
> [<c053c57f>] release_dev+0x620/0x63f
> [<c053c5ad>] tty_release+0xf/0x18
> [<c047674e>] __fput+0xba/0x190
> [<c04740f6>] filp_close+0x52/0x59
> [<c0428fdc>] put_files_struct+0x65/0xa7
> [<c042a1bf>] do_exit+0x246/0x787
> [<c042a78d>] sys_exit_group+0x0/0xd
> [<c0433185>] get_signal_to_deliver+0x38b/0x3b3
> [<c040365b>] do_notify_resume+0x83/0x6c6
> [<c04040da>] work_notifysig+0x13/0x19
> [<00119402>] 0x119402
> =======================

Actions: View

Attachments on bug 227203: 147273 | 147282 | 149770