Attachment 147613 Details for Bug 220470 – Kai's working fc6 boot log

Kai's working fc6 boot log

workinglog.txt (text/plain), 14.33 KB, created by Kai Engert (:kaie) (inactive account) on 2007-02-07 23:45:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kai Engert (:kaie) (inactive account)

Created: 2007-02-07 23:45:56 UTC

Size: 14.33 KB

patch

obsolete

>Linux version 2.6.18-1.2849.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 12:45:28 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fb930
>Using x86 segment limits to approximate NX protection
>DMI 2.3 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:6 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 1100.185 MHz processor.
>Built 1 zonelists.  Total pages: 262128
>Kernel command line: ro root=/dev/sdb3 console=ttyS0,9600n8 console=tty0 1
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07af000 soft=c078f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032768k/1048512k available (2139k kernel code, 14908k reserved, 866k data, 244k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2201.62 BogoMIPS (lpj=1100810)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm)  stepping 02
>Total of 1 processors activated (2201.62 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1478k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by vt8235 PM
>PCI quirk: region 0400-040f claimed by vt8235 SMB
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: cde00000-cfefffff
>  PREFETCH window: add00000-bdcfffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1170897834.834:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key CA06D81CB13FD94
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 16 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: Unable to derive IRQ for device 0000:00:11.1
>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>hda: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CD/DVD-ROM drive
>hdb: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
>hda: Disabling (U)DMA for ATAPI CD-ROM DRIVE 40X MAXIMUM (blacklisted)
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: SAMSUNG SP0822N, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 512KiB
>hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
>hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 662 not supported
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 386k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 169, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 9
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 169, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 169, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
>PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 9
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 169, io mem 0xdbfdfe00
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
>sym0: <896> rev 0x7 at pci 0000:00:06.0 irq 177
>sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
>sym0: open drain IRQ line driver, using on-chip SRAM
>sym0: using LOAD/STORE-based firmware.
>sym0: handling phase mismatch from SCRIPTS.
>sym0: SCSI BUS has been reset.
>scsi0 : sym-2.2.3
> target0:0:0: Multiple LUNs disabled in NVRAM
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>input: HID 2101:020f as /class/input/input0
>input: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:10.0-1
>input: HID 2101:020f as /class/input/input1
>input: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:10.0-1
> target0:0:1: Multiple LUNs disabled in NVRAM
>  Vendor: FUJITSU   Model: MCF3064SS         Rev: 0020
>  Type:   Optical Device                     ANSI SCSI revision: 02
> target0:0:1: Beginning Domain Validation
> target0:0:1: asynchronous
> target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
> target0:0:1: Domain Validation skipping write tests
> target0:0:1: Ending Domain Validation
>sd 0:0:1:0: Attached scsi removable disk sda
> target0:0:2: Multiple LUNs disabled in NVRAM
> target0:0:3: Multiple LUNs disabled in NVRAM
> target0:0:4: Multiple LUNs disabled in NVRAM
> target0:0:5: Multiple LUNs disabled in NVRAM
> target0:0:6: Multiple LUNs disabled in NVRAM
> target0:0:8: Multiple LUNs disabled in NVRAM
> target0:0:9: Multiple LUNs disabled in NVRAM
> target0:0:10: Multiple LUNs disabled in NVRAM
> target0:0:11: Multiple LUNs disabled in NVRAM
> target0:0:12: Multiple LUNs disabled in NVRAM
> target0:0:13: Multiple LUNs disabled in NVRAM
> target0:0:14: Multiple LUNs disabled in NVRAM
> target0:0:15: Multiple LUNs disabled in NVRAM
>ACPI: PCI Interrupt 0000:00:06.1[B] -> GSI 18 (level, low) -> IRQ 185
>sym1: <896> rev 0x7 at pci 0000:00:06.1 irq 185
>sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
>sym1: open drain IRQ line driver, using on-chip SRAM
>sym1: using LOAD/STORE-based firmware.
>sym1: handling phase mismatch from SCRIPTS.
>sym1: SCSI BUS has been reset.
>scsi1 : sym-2.2.3
>  Vendor: IBM       Model: DPSS-336950N      Rev: S96H
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target1:0:0: tagged command queuing enabled, command queue depth 16.
> target1:0:0: Beginning Domain Validation
> target1:0:0: asynchronous
> target1:0:0: wide asynchronous
> target1:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
> target1:0:0: Domain Validation skipping write tests
> target1:0:0: Ending Domain Validation
>SCSI device sdb: 72170880 512-byte hdwr sectors (36951 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 72170880 512-byte hdwr sectors (36951 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: Attached scsi disk sdb
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1170897860.762:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1604 types, 204 bools, 1 sens, 1024 cats
>security:  59 classes, 50374 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1170897863.722:3): policy loaded auid=4294967295
>

Actions: View

Attachments on bug 220470: 144195 | 147108 | 147122 | 147123 | 147502 | 147560 | 147613 | 147614 | 147615 | 147622 | 147623 | 147625 | 147626 | 147661 | 148114 | 148115 | 149620