Attachment 147615 Details for Bug 220470 – Kai's boot log diff

Kai's boot log diff

working-to-broken-diff.txt (text/plain), 16.70 KB, created by Kai Engert (:kaie) (inactive account) on 2007-02-07 23:47:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kai Engert (:kaie) (inactive account)

Created: 2007-02-07 23:47:44 UTC

Size: 16.70 KB

patch

obsolete

>--- workinglog.txt	2007-02-08 00:44:50.000000000 +0100
>+++ brokenlog.txt	2007-02-08 00:45:09.000000000 +0100
>@@ -1,5 +1,19 @@
>-Linux version 2.6.18-1.2849.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 12:45:28 EST 2006
>+Linux version 2.6.20-1.2922.fc7 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070123 (Red Hat 4.1.1-54)) #1 SMP Sun Feb 4 18:05:14 EST 2007
> BIOS-provided physical RAM map:
>+sanitize start
>+sanitize end
>+copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>+copy_e820_map() type is E820_RAM
>+copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>+copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
>+copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>+copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
>+copy_e820_map() type is E820_RAM
>+copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3
>+copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4
>+copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>+copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>+copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
>@@ -14,9 +28,14 @@
> 896MB LOWMEM available.
> found SMP MP-table at 000fb930
> Using x86 segment limits to approximate NX protection
>+Zone PFN ranges:
>+  DMA             0 ->     4096
>+  Normal       4096 ->   229376
>+  HighMem    229376 ->   262128
>+early_node_map[1] active PFN ranges
>+    0:        0 ->   262128
> DMI 2.3 present.
> Using APIC driver default
>-IO/L-APIC allowed because system is MP or new enough
> ACPI: PM-Timer IO Port: 0x808
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:6 APIC version 16
>@@ -27,20 +46,38 @@
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>-Detected 1100.185 MHz processor.
>-Built 1 zonelists.  Total pages: 262128
>+Detected 1100.087 MHz processor.
>+Built 1 zonelists.  Total pages: 258801
> Kernel command line: ro root=/dev/sdb3 console=ttyS0,9600n8 console=tty0 1
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
>-CPU 0 irqstacks, hard=c07af000 soft=c078f000
>+CPU 0 irqstacks, hard=c0774000 soft=c0754000
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Console: colour VGA+ 80x25
>+Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>+... MAX_LOCKDEP_SUBCLASSES:    8
>+... MAX_LOCK_DEPTH:          30
>+... MAX_LOCKDEP_KEYS:        2048
>+... CLASSHASH_SIZE:           1024
>+... MAX_LOCKDEP_ENTRIES:     8192
>+... MAX_LOCKDEP_CHAINS:      16384
>+... CHAINHASH_SIZE:          8192
>+ memory used by lock dependency info: 1064 kB
>+ per task-struct memory footprint: 1200 bytes
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>-Memory: 1032768k/1048512k available (2139k kernel code, 14908k reserved, 866k data, 244k init, 131008k highmem)
>+Memory: 1024536k/1048512k available (2048k kernel code, 23184k reserved, 1084k data, 236k init, 131008k highmem)
>+virtual kernel memory layout:
>+    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>+    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>+    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>+    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>+      .init : 0xc0714000 - 0xc074f000   ( 236 kB)
>+      .data : 0xc060019d - 0xc070f414   (1084 kB)
>+      .text : 0xc0400000 - 0xc060019d   (2048 kB)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
>-Calibrating delay using timer specific routine.. 2201.62 BogoMIPS (lpj=1100810)
>+Calibrating delay using timer specific routine.. 2202.12 BogoMIPS (lpj=1101060)
> Security Framework v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
>@@ -53,15 +90,13 @@
> Intel machine check reporting enabled on CPU#0.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
>-Freeing SMP alternatives: 12k freed
>+Freeing SMP alternatives: 11k freed
> ACPI: Core revision 20060707
> CPU0: AMD Athlon(tm)  stepping 02
>-Total of 1 processors activated (2201.62 BogoMIPS).
>+Total of 1 processors activated (2202.12 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> Brought up 1 CPUs
>-checking if image is initramfs... it is
>-Freeing initrd memory: 1478k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>@@ -83,8 +118,9 @@
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 10 devices
>-usbcore: registered new driver usbfs
>-usbcore: registered new driver hub
>+usbcore: registered new interface driver usbfs
>+usbcore: registered new interface driver hub
>+usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> NetLabel: Initializing
>@@ -97,28 +133,24 @@
>   PREFETCH window: add00000-bdcfffff
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>-TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>-TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>+TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>+TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
>+checking if image is initramfs... it is
>+Freeing initrd memory: 2788k freed
> apm: BIOS not found.
> audit: initializing netlink socket (disabled)
>-audit(1170897834.834:1): initialized
>+audit(1170897716.267:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux:  Registering netfilter hooks
>-Initializing Cryptographic API
>-ksign: Installing public key data
>-Loading keyring
>-- Added public key CA06D81CB13FD94
>-- User ID: Red Hat, Inc. (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
>-pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Processor [CPU1] (supports 16 throttling states)
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
>@@ -133,86 +165,57 @@
> 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>-Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>-ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>-VP_IDE: IDE controller at PCI slot 0000:00:11.1
>-ACPI: Unable to derive IRQ for device 0000:00:11.1
>-ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>-PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
>-VP_IDE: chipset revision 6
>-VP_IDE: not 100% native mode: will probe irqs later
>-VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>-    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>-    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>-hda: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CD/DVD-ROM drive
>-hdb: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
>-hda: Disabling (U)DMA for ATAPI CD-ROM DRIVE 40X MAXIMUM (blacklisted)
>-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>-hdc: SAMSUNG SP0822N, ATA DISK drive
>-ide1 at 0x170-0x177,0x376 on irq 15
>-hdc: max request size: 512KiB
>-hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
>-hdc: cache flushes supported
>- hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
>-ide-floppy driver 0.99.newide
>-usbcore: registered new driver libusual
>-usbcore: registered new driver hiddev
>-usbcore: registered new driver usbhid
>+usbcore: registered new interface driver libusual
>+usbcore: registered new interface driver hiddev
>+usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
>-serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
>+serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
>-md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>-md: bitmap version 4.39
> TCP bic registered
>-Initializing IPsec netlink socket
>+Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
>-powernow-k8: Processor cpuid 662 not supported
> Using IPI No-Shortcut mode
>-ACPI: (supports<6>Time: tsc clocksource has been installed.
>- S0 S1 S4 S5)
>-Freeing unused kernel memory: 244k freed
>-Write protecting the kernel read-only data: 386k
>+Time: tsc clocksource has been installed.
>+ACPI: (supports S0 S1 S4 S5)
>+Freeing unused kernel memory: 236k freed
>+Write protecting the kernel read-only data: 784k
> USB Universal Host Controller Interface driver v3.0
>-ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
>-PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9
>+ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>-uhci_hcd 0000:00:10.0: irq 169, io base 0x0000d400
>+uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d400
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
>-ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
>-PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 9
>+ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>-uhci_hcd 0000:00:10.1: irq 169, io base 0x0000d800
>+uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d800
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
>-ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
>-PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9
>+ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>-uhci_hcd 0000:00:10.2: irq 169, io base 0x0000dc00
>+uhci_hcd 0000:00:10.2: irq 16, io base 0x0000dc00
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb 1-1: new low speed USB device using uhci_hcd and address 2
>-ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
>-PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 9
>+ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
> ehci_hcd 0000:00:10.3: EHCI Host Controller
> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>-ehci_hcd 0000:00:10.3: irq 169, io mem 0xdbfdfe00
>+ehci_hcd 0000:00:10.3: irq 16, io mem 0xdbfdfe00
> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 6 ports detected
> SCSI subsystem initialized
>-ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
>-sym0: <896> rev 0x7 at pci 0000:00:06.0 irq 177
>+ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
>+sym0: <896> rev 0x7 at pci 0000:00:06.0 irq 17
> sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
>@@ -220,84 +223,13 @@
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.3
>  target0:0:0: Multiple LUNs disabled in NVRAM
>-usb 1-1: new low speed USB device using uhci_hcd and address 3
>-usb 1-1: configuration #1 chosen from 1 choice
>-input: HID 2101:020f as /class/input/input0
>-input: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:10.0-1
>-input: HID 2101:020f as /class/input/input1
>-input: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:10.0-1
>- target0:0:1: Multiple LUNs disabled in NVRAM
>-  Vendor: FUJITSU   Model: MCF3064SS         Rev: 0020
>-  Type:   Optical Device                     ANSI SCSI revision: 02
>- target0:0:1: Beginning Domain Validation
>- target0:0:1: asynchronous
>- target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
>- target0:0:1: Domain Validation skipping write tests
>- target0:0:1: Ending Domain Validation
>-sd 0:0:1:0: Attached scsi removable disk sda
>- target0:0:2: Multiple LUNs disabled in NVRAM
>- target0:0:3: Multiple LUNs disabled in NVRAM
>- target0:0:4: Multiple LUNs disabled in NVRAM
>- target0:0:5: Multiple LUNs disabled in NVRAM
>- target0:0:6: Multiple LUNs disabled in NVRAM
>- target0:0:8: Multiple LUNs disabled in NVRAM
>- target0:0:9: Multiple LUNs disabled in NVRAM
>- target0:0:10: Multiple LUNs disabled in NVRAM
>- target0:0:11: Multiple LUNs disabled in NVRAM
>- target0:0:12: Multiple LUNs disabled in NVRAM
>- target0:0:13: Multiple LUNs disabled in NVRAM
>- target0:0:14: Multiple LUNs disabled in NVRAM
>- target0:0:15: Multiple LUNs disabled in NVRAM
>-ACPI: PCI Interrupt 0000:00:06.1[B] -> GSI 18 (level, low) -> IRQ 185
>-sym1: <896> rev 0x7 at pci 0000:00:06.1 irq 185
>+ACPI: PCI Interrupt 0000:00:06.1[B] -> GSI 18 (level, low) -> IRQ 18
>+sym1: <896> rev 0x7 at pci 0000:00:06.1 irq 18
> sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
> sym1: open drain IRQ line driver, using on-chip SRAM
> sym1: using LOAD/STORE-based firmware.
> sym1: handling phase mismatch from SCRIPTS.
> sym1: SCSI BUS has been reset.
> scsi1 : sym-2.2.3
>-  Vendor: IBM       Model: DPSS-336950N      Rev: S96H
>-  Type:   Direct-Access                      ANSI SCSI revision: 03
>- target1:0:0: tagged command queuing enabled, command queue depth 16.
>- target1:0:0: Beginning Domain Validation
>- target1:0:0: asynchronous
>- target1:0:0: wide asynchronous
>- target1:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
>- target1:0:0: Domain Validation skipping write tests
>- target1:0:0: Ending Domain Validation
>-SCSI device sdb: 72170880 512-byte hdwr sectors (36951 MB)
>-sdb: Write Protect is off
>-SCSI device sdb: drive cache: write back
>-SCSI device sdb: 72170880 512-byte hdwr sectors (36951 MB)
>-sdb: Write Protect is off
>-SCSI device sdb: drive cache: write back
>- sdb: sdb1 sdb2 sdb3
>-sd 1:0:0:0: Attached scsi disk sdb
>-kjournald starting.  Commit interval 5 seconds
>-EXT3-fs: mounted filesystem with ordered data mode.
>-audit(1170897860.762:2): enforcing=1 old_enforcing=0 auid=4294967295
>-security:  3 users, 6 roles, 1604 types, 204 bools, 1 sens, 1024 cats
>-security:  59 classes, 50374 rules
>-SELinux:  Completing initialization.
>-SELinux:  Setting up existing superblocks.
>-SELinux: initialized (dev sdb3, type ext3), uses xattr
>-SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>-SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>-SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>-SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>-SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>-SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>-SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>-SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>-SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>-SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>-SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>-SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>-SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>-SELinux: initialized (dev proc, type proc), uses genfs_contexts
>-SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>-SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>-SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>-audit(1170897863.722:3): policy loaded auid=4294967295
>+Kernel panic - not syncing: Attempted to kill init!
>

Actions: View

Attachments on bug 220470: 144195 | 147108 | 147122 | 147123 | 147502 | 147560 | 147613 | 147614 | 147615 | 147622 | 147623 | 147625 | 147626 | 147661 | 148114 | 148115 | 149620