Attachment 147644 Details for Bug 227808 – dmesg first machine

dmesg first machine

dmesg (text/plain), 12.92 KB, created by Leonard den Ottolander (Locomo) on 2007-02-08 11:45:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Leonard den Ottolander (Locomo)

Created: 2007-02-08 11:45:34 UTC

Size: 12.92 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/)
>Linux version 2.6.9-42.0.8.EL (mockbuild@builder6.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 Tue Jan 30 12:09:26 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
> BIOS-e820: 000000003f7f0000 - 000000003f7f8000 (ACPI data)
> BIOS-e820: 000000003f7f8000 - 000000003f800000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 AMI                                   ) @ 0x00000000000fa4c0
>ACPI: RSDT (v001 AMIINT VIA_K8   0x00000010 MSFT 0x00000097) @ 0x000000003f7f0000
>ACPI: FADT (v001 AMIINT VIA_K8   0x00000011 MSFT 0x00000097) @ 0x000000003f7f0030
>ACPI: MADT (v001 AMIINT VIA_K8   0x00000009 MSFT 0x00000097) @ 0x000000003f7f00c0
>ACPI: DSDT (v001    VIA   VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x0000000000000000
>No mptable found.
>On node 0 totalpages: 260080
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 255984 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
>Checking aperture...
>CPU 0: aperture @ d0000000 size 128 MB
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2000.181 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 1018104k/1040320k available (2428k kernel code, 21476k reserved, 1325k data, 168k init)
>Calibrating delay using timer specific routine.. 4006.88 BogoMIPS (lpj=2003442)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
>Using local APIC NMI watchdog using perfctr0
>Using local APIC timer interrupts.
>Detected 12.501 MHz APIC timer.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
>agpgart: Detected AGP bridge 0
>agpgart: Maximum main memory to use for agp memory: 933M
>agpgart: AGP aperture is 128M @ 0xd0000000
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1170931174.257:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key C2E2E11C3896E624
>- User ID: CentOS (Kernel Module GPG key)
>PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
>PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
>PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
>PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports C1, 16 throttling states)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.0
>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 169
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: SAMSUNG SP1604N, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: max request size: 1024KiB
>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>ACPI: (supports S0 S1 S4 S5)
>ACPI wakeup devices: 
>PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD  AC9  MC9 ILAN 
>Freeing unused kernel memory: 168k freed
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-42.0.8.EL
>FDC 0 is a post-1991 82077
>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
>divert: allocating divert_blk for eth0
>eth0: VIA Rhine II at 0xcffffd00, 00:11:09:cc:bf:31, IRQ 185.
>eth0: MII PHY found at address 1, status 0x7869 advertising 01e1 Link 41e1.
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: irq 177, pci mem ffffff000001ce00
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: irq 177, io base 000000000000e000
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: irq 177, io base 000000000000e400
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: irq 177, io base 000000000000e800
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: irq 177, io base 000000000000ec00
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on hda8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2000052k swap on /dev/hda6.  Priority:-1 extents:1
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>i2c /dev entries driver
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff8045d400(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 227808: 147643 | 147644 | 147645 | 147646 | 147647 | 147649 | 147650 | 149849