Attachment 147746 Details for Bug 225399 – dmesg output

dmesg output

dmesg.bork (text/plain), 23.90 KB, created by Joe Orton on 2007-02-09 08:41:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joe Orton

Created: 2007-02-09 08:41:26 UTC

Size: 23.90 KB

patch

obsolete

>Linux version 2.6.19-1.2895.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:50:56 EST 2007
>Command line: ro root=/dev/md0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe8ac00 (usable)
> BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
> BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
> BIOS-e820: 000000007fe8ec00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523914) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000feb00
>ACPI: XSDT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd266
>ACPI: FADT (v003 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd35e
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050211) @ 0x00000000fffcd764
>ACPI: MADT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd452
>ACPI: BOOT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd4c4
>ACPI: ASF! (v016 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd4ec
>ACPI: MCFG (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd553
>ACPI: HPET (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd591
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050211) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fe8a000
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523914) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fe8a000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      160
>    0:      256 ->   523914
>On node 0 totalpages: 523818
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1447 pages reserved
>  DMA zone: 2489 pages, LIFO batch:0
>  DMA32 zone: 8122 pages used for memmap
>  DMA32 zone: 511696 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514185
>Kernel command line: ro root=/dev/md0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 2051424k/2095656k available (2468k kernel code, 43848k reserved, 1934k data, 312k init)
>Calibrating delay using timer specific routine.. 6788.50 BogoMIPS (lpj=3394251)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12469241
>Detected 12.469 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6783.03 BogoMIPS (lpj=3391519)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) D CPU 3.40GHz stepping 02
>Brought up 2 CPUs
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 3391.655 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>migration_cost=1076
>checking if image is initramfs... it is
>Freeing initrd memory: 1624k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fe900000-feafffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: fe700000-fe7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fe600000-fe6fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1170142884.915:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3990ACCD31A7D65A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: PHILIPS DVD+/-RW DVD8701, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 493k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/all, error -71
>md: raid0 personality registered for level 0
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  5176.000 MB/sec
>raid5: using function: generic_sse (5176.000 MB/sec)
>raid6: int64x1   1519 MB/s
>raid6: int64x2   1941 MB/s
>raid6: int64x4   2136 MB/s
>raid6: int64x8   1972 MB/s
>raid6: sse2x1    2480 MB/s
>raid6: sse2x2    2265 MB/s
>raid6: sse2x4    3242 MB/s
>raid6: using algorithm sse2x4 (3242 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>usb 1-1.1: new full speed USB device using uhci_hcd and address 5
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC20000006D00 ctl 0x0 bmdma 0x0 irq 2299
>ata2: SATA max UDMA/133 cmd 0xFFFFC20000006D80 ctl 0x0 bmdma 0x0 irq 2299
>ata3: SATA max UDMA/133 cmd 0xFFFFC20000006E00 ctl 0x0 bmdma 0x0 irq 2299
>ata4: SATA max UDMA/133 cmd 0xFFFFC20000006E80 ctl 0x0 bmdma 0x0 irq 2299
>scsi0 : ahci
>usb 1-1.1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard Hub as /class/input/input0
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.1
>input: Dell Dell USB Keyboard Hub as /class/input/input1
>input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.1
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 8
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST3160828AS      8.04 PQ: 0 ANSI: 5
>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 2:0:0:0: Direct-Access     ATA      ST3160828AS      8.04 PQ: 0 ANSI: 5
>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 2:0:0:0: Attached scsi disk sdb
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb3 ...
>md:  adding sdb3 ...
>md: sdb2 has different UUID to sdb3
>md: sdb1 has different UUID to sdb3
>md:  adding sda5 ...
>md: sda3 has different UUID to sdb3
>md: sda2 has different UUID to sdb3
>md: created md0
>md: bind<sda5>
>md: bind<sdb3>
>md: running: <sdb3><sda5>
>md0: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at sdb3
>raid0:   comparing sdb3(30716160) with sdb3(30716160)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda5
>raid0:   comparing sda5(30716160) with sdb3(30716160)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 61432320 blocks.
>raid0 : conf->hash_spacing is 61432320 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda3 ...
>md: sda2 has different UUID to sdb2
>md: created md2
>md: bind<sda3>
>md: bind<sdb2>
>md: running: <sdb2><sda3>
>md: personality for level 1 is not loaded!
>md: do_md_run() returned -22
>md: md2 stopped.
>md: unbind<sdb2>
>md: export_rdev(sdb2)
>md: unbind<sda3>
>md: export_rdev(sda3)
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda2 ...
>md: created md1
>md: bind<sda2>
>md: bind<sdb1>
>md: running: <sdb1><sda2>
>md1: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at sdb1
>raid0:   comparing sdb1(61440256) with sdb1(61440256)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda2
>raid0:   comparing sda2(61440512) with sdb1(61440256)
>raid0:   NOT EQUAL
>raid0:   comparing sda2(61440512) with sda2(61440512)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 2 zones
>raid0: FINAL 2 zones
>raid0: zone 1
>raid0: checking sda2 ... contained as device 0
>  (61440512) is smallest!.
>raid0: checking sdb1 ... nope.
>raid0: zone->nb_dev: 1, size: 256
>raid0: current zone offset: 61440512
>raid0: done.
>raid0 : md_size is 122880768 blocks.
>raid0 : conf->hash_spacing is 122880512 blocks.
>raid0 : nb_zone is 2.
>raid0 : Allocating 16 bytes for hash.
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1170142891.064:2): selinux=0 auid=4294967295
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:13:72:0d:e2:61
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>input: PC Speaker as /class/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[fe6ff000-fe6ff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>intel_rng: FWH not detected
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000d100807929c2]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sda3 ...
>md:  adding sda3 ...
>md:  adding sdb2 ...
>md: created md2
>md: bind<sdb2>
>md: bind<sda3>
>md: running: <sda3><sdb2>
>md: raid1 personality registered for level 1
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>EXT3 FS on md0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096440k swap on /dev/sdb5.  Priority:-1 extents:1 across:2096440k
>Adding 2096440k swap on /dev/sda6.  Priority:-2 extents:1 across:2096440k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>usb 5-2: new high speed USB device using ehci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>usb 5-2.4: new low speed USB device using ehci_hcd and address 4
>usb 5-2.4: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.4
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>do_IRQ: 0.217 No irq handler for vector

Actions: View

Attachments on bug 225399: 146914 | 147746 | 151790 | 151791 | 151993 | 152611