Attachment 147843 Details for Bug 198071 – output of dmesg

output of dmesg

bug-report-dmesg.txt (text/plain), 26.98 KB, created by Matěj Cepl on 2007-02-10 22:25:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2007-02-10 22:25:13 UTC

Size: 26.98 KB

patch

obsolete

>Linux version 2.6.19-1.2895.6.1.fc6.jwltest.19 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Thu Feb 8 18:55:18 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
> BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128979) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128979
>  HighMem    128979 ->   128979
>early_node_map[1] active PFN ranges
>    0:        0 ->   128979
>On node 0 totalpages: 128979
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 975 pages used for memmap
>  Normal zone: 123908 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fc9b0
>ACPI: RSDT (v001 DELL    CPi R   0x27d5031f ASL  0x00000061) @ 0x1f7d4425
>ACPI: FADT (v001 DELL    CPi R   0x27d5031f ASL  0x00000061) @ 0x1f7d4c00
>ACPI: MADT (v001 DELL    CPi R   0x27d5031f ASL  0x00000047) @ 0x1f7d5400
>ACPI: MCFG (v016 DELL    CPi R   0x27d5031f ASL  0x00000061) @ 0x1f7d53c0
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1f7d4658
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030522) @ 0x1f7d445d
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>Detected 1396.591 MHz processor.
>Built 1 zonelists.  Total pages: 127972
>Kernel command line: ro root=/dev/VolGroup00/LogVol02 quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0809000 soft=c07e9000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 503748k/515916k available (2214k kernel code, 11584k reserved, 1135k data, 244k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf7d3000   ( 503 MB)
>      .init : 0xc07a7000 - 0xc07e4000   ( 244 kB)
>      .data : 0xc0629a7f - 0xc07458f4   (1135 kB)
>      .text : 0xc0400000 - 0xc0629a7f   (2214 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2795.08 BogoMIPS (lpj=1397543)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
>Total of 1 processors activated (2795.08 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2266k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
>pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0x900-0x90f has been reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0x930-0x93f has been reserved
>pnp: 00:08: ioport range 0x940-0x97f has been reserved
>pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved
>pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved
>pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved
>pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved
>pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved
>pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved
>pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved
>pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 32000000-33ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: dfd00000-dfdfffff
>  PREFETCH window: 30000000-31ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1171144113.767:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [THM] (59 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>ICH6: chipset revision 3
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>hda: Hitachi HTS424030M9AT00, ATA DISK drive
>hdb: SONY CD-RW/DVD-ROM CRX830E, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hda: max request size: 512KiB
>hda: 58605120 sectors (30005 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:01a4]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x00001002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000007
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 416k
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 1-2: device not accepting address 2, error -71
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1595 types, 173 bools, 1 sens, 1024 cats
>security:  59 classes, 50114 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1171144121.615:2): policy loaded auid=4294967295
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>intel_rng: FWH not detected
>Floppy drive(s): fd0 is 1.44M
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>intel8x0_measure_ac97_clock: measured 51848 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>MC'97 1 converters and GPIO not ready (0xff00)
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>wmaster0: Selected rate control algorithm 'simple'
>e100: eth0: e100_probe: addr 0xdfdfd000, irq 20, MAC addr 00:11:43:52:2E:AA
>bcm43xx_d80211: Broadcom 4318 WLAN found
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>scsi 0:0:0:0: Direct-Access     USB2.0   USB Flash Disk   0.00 PQ: 0 ANSI: 2
>SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi removable disk sda
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PBTN]
>ACPI: Sleep Button (CM) [SBTN]
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>Adding 1015800k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1015800k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>audit(1171144166.812:3): audit_pid=1939 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.5.0 20060119 on minor 0
>ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
>usbcore: registered new interface driver ndiswrapper
>bcm43xx_d80211: Adding Interface type 2
>bcm43xx_d80211: Found PHY: Version 3, Type 2, Revision 7
>bcm43xx_d80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>bcm43xx_d80211: Loading firmware version 351.1092 (2006-05-13 03:13:11)
>bcm43xx_d80211: Radio turned on
>bcm43xx_d80211: Chip initialized
>bcm43xx_d80211: 32-bit DMA initialized
>bcm43xx_d80211: Wireless interface started
>wmaster0: Does not support passive scan, disabled
>eth1: starting scan
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>eth1: scan completed
>eth1: starting scan
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>eth1: scan completed
>eth1: starting scan
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>wmaster0: TX to low-level driver (len=42) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:90:4b:d7:ae:91 A3=ff:ff:ff:ff:ff:ff
>eth1: scan completed
>eth1: no IPv6 routers present
>bcm43xx_d80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>bcm43xx_d80211: Wireless interface stopped
>bcm43xx_d80211: Removing Interface type 2
>bcm43xx_d80211: DMA-32 0x0200 (RX) max used slots: 1/64
>bcm43xx_d80211: DMA-32 0x02A0 (TX) max used slots: 0/128
>bcm43xx_d80211: DMA-32 0x0280 (TX) max used slots: 0/128
>bcm43xx_d80211: DMA-32 0x0260 (TX) max used slots: 0/128
>bcm43xx_d80211: DMA-32 0x0240 (TX) max used slots: 0/128
>bcm43xx_d80211: DMA-32 0x0220 (TX) max used slots: 2/128
>bcm43xx_d80211: DMA-32 0x0200 (TX) max used slots: 0/128
>bcm43xx_d80211: Radio turned off
>usbcore: deregistering interface driver ndiswrapper
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>bcm43xx driver
>bcm43xx_d80211: Adding Interface type 2
>bcm43xx_d80211: Found PHY: Version 3, Type 2, Revision 7
>bcm43xx_d80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>bcm43xx_d80211: Loading firmware version 351.1092 (2006-05-13 03:13:11)
>bcm43xx_d80211: Radio turned on
>bcm43xx_d80211: Chip initialized
>bcm43xx_d80211: 32-bit DMA initialized
>bcm43xx_d80211: Wireless interface started
>wmaster0: Does not support passive scan, disabled
>bcm43xx_d80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: no IPv6 routers present
>bcm43xx_d80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: cannot create symlink to default key

Actions: View

Attachments on bug 198071: 132120 | 147843 | 147844 | 150958 | 150960 | 155899 | 203231 | 203241